When the kernel is compiled with -asan-stack=true, the address sanitizer
will emit inline accesses to the shadow map. In other words, some
shadow map accesses are not intercepted by the KASAN runtime, so they
cannot be disabled even if the runtime is not yet initialized by
kasan_init() at the end of hammer_time().
This went unnoticed because the loader will initialize all PML4 entries
of the bootstrap page table to point to the same PDP page, so early
shadow map accesses do not raise a page fault, though they are silently
corrupting memory. In fact, when the loader does not copy the staging
area, we do get a page fault since in that case only the first and last
PML4Es are populated by the loader. But due to another bug, the loader
always treated KASAN kernels as non-relocatable and thus always copied
the staging area.
It is not really practical to annotate hammer_time() and all callees
with __nosanitizeaddress, so instead add some early initialization which
creates a shadow for the boot stack used by hammer_time(). This is only
needed by KASAN, not by KMSAN, but the shared pmap code handles both.
Reported by: mhorne
Reviewed by: kib
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35449
We use pmap_invalidate_cpu_mask() to get the set of active CPUs. This
(32-byte) set is copied by value through multiple frames until we get to
smp_targeted_tlb_shootdown(), where it is copied yet again.
Avoid this copying by having smp_targeted_tlb_shootdown() make a local
copy of the active CPUs for the pmap, and drop the cpuset parameter,
simplifying callers. Also leverage the use of the non-destructive
CPU_FOREACH_ISSET to avoid unneeded copying within
smp_targeted_tlb_shootdown().
Reviewed by: alc, kib
Tested by: pho
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32792
This is in preference to simply filling the cpuset, and allows the
conditional in pmap_invalidate_cpu_mask() to be elided.
Also export pmap_invalidate_cpu_mask() outside of pmap.c for use in a
subsequent commit.
Suggested by: kib
Reviewed by: alc, kib
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32792
When working on the ports these functions were slightly different, but
now there's no reason for them to be separate.
No functional change intended.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Similar to pmap_page_set_memattr() by setting MD page cache attribute
to the argument. Unlike pmap_page_set_memattr(), does not flush cache
for the direct mapping of the page.
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32318
KMSAN requires two shadow maps, each one-to-one with the kernel map.
Allocate regions of the kernels PML4 page for them. Add functions to
create mappings in the shadow map regions, these will be used by the
KMSAN runtime.
Reviewed by: alc, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31295
Current expression checks that vm_page_alloc(9) never returns a page
belonging to the preload area. This is not true if something was freed
from there, for instance a preloaded module was unloaded, or ucode update
freed.
Only check that we never allow to allocate a page belonging to the kernel
proper, check against _end.
Reported and tested by: dhw
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
which is the place to put MD asserts about allocated pages.
On amd64, verify that allocated page does not belong to the kernel
(text, data) or early allocated pages.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31121
The idea behind KASAN is to use a region of memory to track the validity
of buffers in the kernel map. This region is the shadow map. The
compiler inserts calls to the KASAN runtime for every emitted load
and store, and the runtime uses the shadow map to decide whether the
access is valid. Various kernel allocators call kasan_mark() to update
the shadow map.
Since the shadow map tracks only accesses to the kernel map, accesses to
other kernel maps are not validated by KASAN. UMA_MD_SMALL_ALLOC is
disabled when KASAN is configured to reduce usage of the direct map.
Currently we have no mechanism to completely eliminate uses of the
direct map, so KASAN's coverage is not comprehensive.
The shadow map uses one byte per eight bytes in the kernel map. In
pmap_bootstrap() we create an initial set of page tables for the kernel
and preloaded data.
When pmap_growkernel() is called, we call kasan_shadow_map() to extend
the shadow map. kasan_shadow_map() uses pmap_kasan_enter() to allocate
memory for the shadow region and map it.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29417
Currently EPT TLB invalidation is done by incrementing a generation
counter and issuing an IPI to all CPUs currently running vCPU threads.
The VMM inner loop caches the most recently observed generation on each
host CPU and invalidates TLB entries before executing the VM if the
cached generation number is not the most recent value.
pmap_invalidate_ept() issues IPIs to force each vCPU to stop executing
guest instructions and reload the generation number. However, it does
not actually wait for vCPUs to exit, potentially creating a window where
guests may continue to reference stale TLB entries.
Fix the problem by bracketing guest execution with an SMR read section
which is entered before loading the invalidation generation. Then,
pmap_invalidate_ept() increments the current write sequence before
loading pm_active and sending IPIs, and polls readers to ensure that all
vCPUs potentially operating with stale TLB entries have exited before
pmap_invalidate_ept() returns.
Also ensure that unsynchronized loads of the generation counter are
wrapped with atomic(9), and stop (inconsistently) updating the
invalidation counter and pm_active bitmask with acquire semantics.
Reviewed by: grehan, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26910
on some more advanced C features.
This fixes gcc-toolchain build of exception.S.
Reported and tested by: kevans
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Since LA57 was moved to the main SDM document with revision 072, it
seems that we should have a support for it, and silicons are coming.
This patch makes pmap support both LA48 and LA57 hardware. The
selection of page table level is done at startup, kernel always
receives control from loader with 4-level paging. It is not clear how
UEFI spec would adapt LA57, for instance it could hand out control in
LA57 mode sometimes.
To switch from LA48 to LA57 requires turning off long mode, requesting
LA57 in CR4, then re-entering long mode. This is somewhat delicate
and done in pmap_bootstrap_la57(). AP startup in LA57 mode is much
easier, we only need to toggle a bit in CR4 and load right value in CR3.
I decided to not change kernel map for now. Single PML5 entry is
created that points to the existing kernel_pml4 (KML4Phys) page, and a
pml5 entry to create our recursive mapping for vtopte()/vtopde().
This decision is motivated by the fact that we cannot overcommit for
KVA, so large space there is unusable until machines start providing
wider physical memory addressing. Another reason is that I do not
want to break our fragile autotuning, so the KVA expansion is not
included into this first step. Nice side effect is that minidumps are
compatible.
On the other hand, (very) large address space is definitely
immediately useful for some userspace applications.
For userspace, numbering of pte entries (or page table pages) is
always done for 5-level structures even if we operate in 4-level mode.
The pmap_is_la57() function is added to report the mode of the
specified pmap, this is done not to allow simultaneous 4-/5-levels
(which is not allowed by hw), but to accomodate for EPT which has
separate level control and in principle might not allow 5-leve EPT
despite x86 paging supports it. Anyway, it does not seems critical to
have 5-level EPT support now.
Tested by: pho (LA48 hardware)
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D25273
When pmap operates in PTI mode, we must reload %cr3 on return to
userspace. In non-PCID mode the reload always flushes all non-global
TLB entries and we take advantage of it by only invalidating the KPT
TLB entries (there is no cached UPT entries at all).
In PCID mode, we flush both KPT and UPT TLB explicitly, but we can
take advantage of the fact that PCID mode command to reload %cr3
includes a flag to flush/not flush target TLB. In particular, we can
avoid the flush for UPT, instead record that load of pc_ucr3 into %cr3
on return to usermode should be flushing. This is done by providing
either all-1s or ~CR3_PCID_MASK in pc_ucr3_load_mask. The mask is
automatically reset to all-1s on return to usermode.
Similarly, we can avoid flushing UPT TLB on context switch, replacing
it by setting pc_ucr3_load_mask. This unifies INVPCID and non-INVPCID
PTI ifunc, leaving only 4 cases instead of 6. This trick is also
applicable both to the TLB shootdown IPI handlers, since handlers
interrupt the target thread.
But then we need to check pc_curpmap in handlers, and this would
reopen the same race for INVPCID machines as was fixed in r306350 for
non-INVPCID. To not introduce the same bug, unconditionally do
spinlock_enter() in pmap_activate().
Reviewed by: alc, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D25483
This is a 32-bit structure embedded in each vm_page, consisting mostly
of page queue state. The use of a structure makes it easy to store a
snapshot of a page's queue state in a stack variable and use cmpset
loops to update that state without requiring the page lock.
This change merely adds the structure and updates references to atomic
state fields. No functional change intended.
Reviewed by: alc, jeff, kib
Sponsored by: Netflix, Intel
Differential Revision: https://reviews.freebsd.org/D22650
Disable the use of executable 2M page mappings in EPT-format page
tables on affected CPUs. For bhyve virtual machines, this effectively
disables all use of superpage mappings on affected CPUs. The
vm.pmap.allow_2m_x_ept sysctl can be set to override the default and
enable mappings on affected CPUs.
Alternate approaches have been suggested, but at present we do not
believe the complexity is warranted for typical bhyve's use cases.
Reviewed by: alc, emaste, markj, scottl
Security: CVE-2018-12207
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D21884
This updates the protection attributes of subranges of the kernel map.
Unlike pmap_protect(), which is typically used for user mappings,
pmap_change_prot() does not perform lazy upgrades of protections.
pmap_change_prot() also updates the aliasing range of the direct map.
Reviewed by: kib
MFC after: 1 month
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21758
- Remove a dead variable from the amd64 pmap_extract_and_hold().
- Fix grammar in the vm_page_wire man page.
Reported by: alc
Reviewed by: alc, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21639
NUMA domain that the pages describe. Patch original from gallatin.
Reviewed by: kib
Tested by: pho
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21252
doing so adds more flexibility with less redundant code.
Reviewed by: jhb, markj, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21250
Similar to PG_FRAME and PG_PS_FRAME, it denotes the mask of the
physical address component of 1G superpage PDP entry.
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D20386
For machines having cmpxcgh16b instruction, i.e. everything but very
early Athlons, provide lockless implementation of delayed
invalidation.
The implementation maintains lock-less single-linked list with the
trick from the T.L. Harris article about volatile mark of the elements
being removed. Double-CAS is used to atomically update both link and
generation. New thread starting DI appends itself to the end of the
queue, setting the generation to the generation of the last element
+1. On DI finish, thread donates its generation to the previous
element. The generation of the fake head of the list is the last
passed DI generation. Basically, the implementation is a queued
spinlock but without spinlock.
Many thanks both to Peter Holm and Mark Johnson for keeping with me
while I produced intermediate versions of the patch.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
MFC note: td_md.md_invl_gen should go to the end of struct thread
Differential revision: https://reviews.freebsd.org/D19630
Skylake Xeons.
See SDM rev. 68 Vol 3 4.6.2 Protection Keys and the description of the
RDPKRU and WRPKRU instructions.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D18893
Apparently AMD machines cannot tolerate this. This was uncovered by
r339386, where cache flush started really flushing the requested range.
Introduce pmap_mapdev_pciecfg(), which simply does not flush cache
comparing with pmap_mapdev(). It assumes that the MCFG region was
never accessed through the cacheable mapping, which is most likely
true for machine to boot at all.
Note that i386 does not need the change, since the architecture
handles access per-page due to the KVA shortage, and page remapping
already does not flush the cache.
Reported and tested by: mjg, Mike Tancsa <mike@sentex.net>
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D17612
The KPI allows to map very large contigous physical memory regions
into KVA, which are not covered by DMAP.
I see both with QEMU and with some real hardware started shipping, the
regions for NVDIMMs might be very far apart from the normal RAM, and
we expect that at least initial users of NVDIMM could install very
large amount of such memory. IMO it is not reasonable to extend DMAP
to cover that far-away regions both because it could overflow existing
4T window for DMAP in KVA, and because it costs in page table pages
allocations, for gap and for possibly unused NV RAM.
Also, KPI provides some special functionality for fast cache flushing
based on the knowledge of the NVRAM mapping use.
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D17070
This simplifies the runtime logic and reduces the number of
runtime-constant branches.
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
Differential revision: https://reviews.freebsd.org/D16736
curpmap.
When performing context switch on a machine without PCID, if current
%cr3 equals to the new pmap %cr3, which is typical for kernel_pmap
vs. kernel process, I overlooked to update PCPU curpmap value. Remove
check for %cr3 not equal to pm_cr3 for doing the update. It is
believed that this case cannot happen at all, due to other changes in
this revision.
Also, do not set the very first curpmap to kernel_pmap, it should be
vmspace0 pmap instead to match curproc.
Move the common code to activate the initial pmap both on BSP and APs
into pmap_activate_boot() helper.
Reported by: eadler, ambrisko
Discussed with: kevans
Reviewed by: alc, markj (previous version)
Tested by: ambrisko (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16618
Use PCID to avoid complete TLB shootdown when switching between user
and kernel mode with PTI enabled.
I use the model close to what I read about KAISER, user-mode PCID has
1:1 correspondence to the kernel-mode PCID, by setting bit 11 in PCID.
Full kernel-mode TLB shootdown is performed on context switches, since
KVA TLB invalidation only works in the current pmap. User-mode part of
TLB is flushed on the pmap activations as well.
Similarly, IPI TLB shootdowns must handle both kernel and user address
spaces for each address. Note that machines which implement PCID but
do not have INVPCID instructions, cause the usual complications in the
IPI handlers, due to the need to switch to the target PCID temporary.
This is racy, but because for PCID/no-INVPCID we disable the
interrupts in pmap_activate_sw(), IPI handler cannot see inconsistent
state of CPU PCID vs PCPU pmap/kcr3/ucr3 pointers.
On the other hand, on kernel/user switches, CR3_PCID_SAVE bit is set
and we do not clear TLB.
I can imagine alternative use of PCID, where there is only one PCID
allocated for the kernel pmap. Then, there is no need to shootdown
kernel TLB entries on context switch. But copyout(3) would need to
either use method similar to proc_rwmem() to access the userspace
data, or (in reverse) provide a temporal mapping for the kernel buffer
into user mode PCID and use trampoline for copy.
Reviewed by: markj (previous version)
Tested by: pho
Discussed with: alc (some aspects)
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D13985
The implementation of the Kernel Page Table Isolation (KPTI) for
amd64, first version. It provides a workaround for the 'meltdown'
vulnerability. PTI is turned off by default for now, enable with the
loader tunable vm.pmap.pti=1.
The pmap page table is split into kernel-mode table and user-mode
table. Kernel-mode table is identical to the non-PTI table, while
usermode table is obtained from kernel table by leaving userspace
mappings intact, but only leaving the following parts of the kernel
mapped:
kernel text (but not modules text)
PCPU
GDT/IDT/user LDT/task structures
IST stacks for NMI and doublefault handlers.
Kernel switches to user page table before returning to usermode, and
restores full kernel page table on the entry. Initial kernel-mode
stack for PTI trampoline is allocated in PCPU, it is only 16
qwords. Kernel entry trampoline switches page tables. then the
hardware trap frame is copied to the normal kstack, and execution
continues.
IST stacks are kept mapped and no trampoline is needed for
NMI/doublefault, but of course page table switch is performed.
On return to usermode, the trampoline is used again, iret frame is
copied to the trampoline stack, page tables are switched and iretq is
executed. The case of iretq faulting due to the invalid usermode
context is tricky, since the frame for fault is appended to the
trampoline frame. Besides copying the fault frame and original
(corrupted) frame to kstack, the fault frame must be patched to make
it look as if the fault occured on the kstack, see the comment in
doret_iret detection code in trap().
Currently kernel pages which are mapped during trampoline operation
are identical for all pmaps. They are registered using
pmap_pti_add_kva(). Besides initial registrations done during boot,
LDT and non-common TSS segments are registered if user requested their
use. In principle, they can be installed into kernel page table per
pmap with some work. Similarly, PCPU can be hidden from userspace
mapping using trampoline PCPU page, but again I do not see much
benefits besides complexity.
PDPE pages for the kernel half of the user page tables are
pre-allocated during boot because we need to know pml4 entries which
are copied to the top-level paging structure page, in advance on a new
pmap creation. I enforce this to avoid iterating over the all
existing pmaps if a new PDPE page is needed for PTI kernel mappings.
The iteration is a known problematic operation on i386.
The need to flush hidden kernel translations on the switch to user
mode make global tables (PG_G) meaningless and even harming, so PG_G
use is disabled for PTI case. Our existing use of PCID is
incompatible with PTI and is automatically disabled if PTI is
enabled. PCID can be forced on only for developer's benefit.
MCE is known to be broken, it requires IST stack to operate completely
correctly even for non-PTI case, and absolutely needs dedicated IST
stack because MCE delivery while trampoline did not switched from PTI
stack is fatal. The fix is pending.
Reviewed by: markj (partially)
Tested by: pho (previous version)
Discussed with: jeff, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
For processing, reclaim_pv_chunk() removes the pv_chunk from the lru
list, which makes pc_lru linkage invalid. Then the pmap lock is
released, which allows for other thread to free the last pv entry
allocated from the chunk and call free_pv_chunk(), which tries to
modify the invalid linkage.
Similarly, the chunk is inserted into the private tailq new_tail
temporary. Again, free_pv_chunk() might be run and corrupt the
linkage for the new_tail after the pmap lock is dropped.
This is a consequence of r299788 elimination of pvh_global_lock, which
allowed for reclaim to run in parallel with other pmap calls which
free pv chunks.
As a fix, do not remove the chunk from pc_lru queue, use a marker to
remember the position in the queue iteration. We can safely operate
on the chunks after the chunk's pmap is locked, we fetched the chunk
after the marker, and we checked that chunk pmap is same as we have
locked, because chunk removal from pc_lru requires both pv_chunk_mutex
and the pmap mutex owned.
Note that the fix lost an optimization which was present in the
previous algorithm. Namely, new_tail requeueing rotated the pv chunks
list so that reclaim didn't scan the same pv chunks that couldn't be
freed (because they contained a wired and/or superpage mapping) on
every invocation. An additional change is planned which would improve
this.
Reported and tested by: pho
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
add support for explicitly requesting that pmap_enter() create a 2MB page
mapping. (Essentially, this feature allows the machine-independent layer to
create superpage mappings preemptively, and not wait for automatic promotion
to occur.)
Export pmap_ps_enabled() to the machine-independent layer.
Add a flag to pmap_pv_insert_pde() that specifies whether it should fail or
reclaim a PV entry when one is not available.
Refactor pmap_enter_pde() into two functions, one by the same name, that is
a general-purpose function for creating PDE PG_PS mappings, and another,
pmap_enter_2mpage(), that is used to prefault 2MB read- and/or execute-only
mappings for execve(2), mmap(2), and shmat(2).
Submitted by: Yufeng Zhou <yz70@rice.edu> (an earlier version)
Reviewed by: kib, markj
Tested by: pho
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D11556
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
PG_PROMOTED, that indicates whether lingering 4KB page mappings might
need to be flushed on a PDE change that restricts or destroys a 2MB
page mapping. This flag allows the pmap to avoid range invalidations
that are both unnecessary and costly.
Reviewed by: kib, markj
MFC after: 6 weeks
Differential Revision: https://reviews.freebsd.org/D9665
Previously these were only declared under #ifdef SMP in <machine/smp.h>.
However, these variables are defind in pmap.c unconditionally, and efirt.c
references them unconditionally. This fixes non-SMP kernel builds.
Discussed with: kib
MFC after: 1 week
amd64 pmap.
The new pmap_pinit_pml4() function initializes the level 4 page table
with entries for the kernel mappings. Both functions are needed for
upcoming EFI Runtime Services support.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
the Vahalia' "Unix Internals" section 15.12 "Other TLB Consistency
Algorithms". The same algorithm is already utilized by the MIPS pmap
to handle ASIDs.
The PCID for the address space is now allocated per-cpu during context
switch to the thread using pmap, when no PCID on the cpu was ever
allocated, or the current PCID is invalidated. If the PCID is reused,
bit 63 of %cr3 can be set to avoid TLB flush.
Each cpu has PCID' algorithm generation count, which is saved in the
pmap pcpu block when pcpu PCID is allocated. On invalidation, the
pmap generation count is zeroed, which signals the context switch code
that already allocated PCID is no longer valid. The implication is
the TLB shootdown for the given cpu/address space, due to the
allocation of new PCID.
The pm_save mask is no longer has to be tracked, which (significantly)
reduces the targets of the TLB shootdown IPIs. Previously, pm_save
was reset only on pmap_invalidate_all(), which made it accumulate the
cpuids of all processors on which the thread was scheduled between
full TLB shootdowns.
Besides reducing the amount of TLB shootdowns and removing atomics to
update pm_saves in the context switch code, the algorithm is much
simpler than the maintanence of pm_save and selection of the right
address space in the shootdown IPI handler.
Reviewed by: alc
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Place the code introduced in r268660 into a separate function that can be
called from uiomove_fromphys. Instead of pre-allocating two KVA pages use
vmem_alloc to allocate them on demand when needed. This prevents blocking if
a page fault is taken while physical addresses from outside the DMAP are
used, since the lock is now removed.
Also introduce a safety catch in PHYS_TO_DMAP and DMAP_TO_PHYS.
Sponsored by: Citrix Systems R&D
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D947
amd64/amd64/pmap.c:
- Factor out the code to deal with non DMAP addresses from pmap_copy_pages
and place it in pmap_map_io_transient.
- Change the code to use vmem_alloc instead of a set of pre-allocated
pages.
- Use pmap_qenter and don't pin the thread if there can be page faults.
amd64/amd64/uio_machdep.c:
- Use pmap_map_io_transient in order to correctly deal with physical
addresses not covered by the DMAP.
amd64/include/pmap.h:
- Add the prototypes for the new functions.
amd64/include/vmparam.h:
- Add safety catches to make sure PHYS_TO_DMAP and DMAP_TO_PHYS are only
used with addresses covered by the DMAP.
forced invalidation of the cache range regardless of the presence of
self-snoop feature. Some recent Intel GPUs in some modes are not
coherent, and dirty lines in CPU cache must be flushed before the
pages are transferred to GPU domain.
Reviewed by: alc (previous version)
Tested by: pho (amd64)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The least significant 8 bits of 'pm_flags' are now used for the IPI vector
to use for nested page table TLB shootdown.
Previously we used IPI_AST to interrupt the host cpu which is functionally
correct but could lead to misleading interrupt counts for AST handler. The
AST handler was also doing a lot more than what is required for the nested
page table TLB shootdown (EOI and IRET).
