and some fixes from Motomichi Matsuzaki. Testing involved many people, but the
final, successful testing was from rwatson who endured several rounds of "it
crashes at XYZ stage" "oh, please correct this typo and try again." The Linux
driver, and to a small extent the limited specs, were both used as a reference
for how to program the chipset.
PR: kern/80396
Submitted by: Martin Mersberger
- Don't call tulip_addr_filter() to reset the RX address filter in
tulip_reset() since that gets called before ether_ifattach(). Just
call it in tulip_init_locked().
- Use be16dec() and le16dec() to parse MAC addresses when programming
the RX filter.
- Let ether_ioctl() handle SIOCSIFMTU since we were doing the exact same
thing with the added bonus that we leaked the driver lock if the MTU
was > ETHERMTU in the homerolled version. This part will be MFC'd.
Clue from: wpaul (1)
Stolen from: marcel (2 via patch for dc(4))
MFC after: 1 week
rather than in ifindex_table[]; all (except one) accesses are
through ifp anyway. IF_LLADDR() works faster, and all (except
one) ifaddr_byindex() users were converted to use ifp->if_addr.
- Stop storing a (pointer to) Ethernet address in "struct arpcom",
and drop the IFP2ENADDR() macro; all users have been converted
to use IF_LLADDR() instead.
PCI-ISA bridge. Thus, when viapm0 or viapropm0 attaches, isab0 dosen't
attach so there is no isa0 bus hung off of that bridge. In the non-ACPI
case, legacy0 will add an isa0 anyway as a fail-safe, but ACPI assumes that
any ISA bus will be enumerated via a bridge. To fix this, call
isab_attach() to attach an isa0 ISA child bus device if the pm or propm
device we are probing is a PCI-ISA bridge. Both drivers now have to
implement the bus_if interface via the generic methods for resource
allocation, etc. to work. Also, we now add 2 new ISA bus drivers that
attach to viapm and viapropm devices.
PR: kern/87363
Reported by: Oliver Fromme olli at secnetix dot de
Tested by: glebius
MFC after: 1 week
With this change, the driver tests good (at least on i386):
wb0: <Winbond W89C840F 10/100BaseTX> port 0xb800-0xb87f mem 0xe6800000-0xe680007f irq 12 at device 10.0 on pci0
miibus1: <MII bus> on wb0
amphy0: <Am79C873 10/100 media interface> on miibus1
amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
wb0: Ethernet address: 00:00:e8:18:2a:02
wb0: link state changed to DOWN
wb0: link state changed to UP
- Add locked variants of init() and start().
- Use callout_*() to manage callout.
- Test IFF_DRV_RUNNING rather than IFF_UP in wb_intr() to see if we are
still active when an interrupt comes in.
I couldn't find any of these cards anywhere to test on myself, and google
turns up references to FreeBSD and OpenBSD manpages for this driver when
trying to locate a card that way. I'm not sure anyone actually uses these
cards with FreeBSD.
Tested by: NO ONE (despite repeated requests)
I had to initialize the ifnet a bit earlier in attach so that the
if_printf()'s in vr_reset() didn't explode with a page fault.
- Use M_ZERO with contigmalloc() rather than an explicit bzero.
cards and teach the re(4) driver to attach to revision 3 cards.
Submitted by: Fredrik Lindberg fli+freebsd-current at shapeshifter dot se
MFC after: 2 weeks
Reviewed by: imp, mdodd
based on XMAC II chip should be ready for this in their initial
mode of operation, and Yukon-based NICs are configured so by
the driver.
PR: kern/79998
MFC after: 1 month
opt_device_polling.h
- Include opt_device_polling.h into appropriate files.
- Embrace with HAVE_KERNEL_OPTION_HEADERS the include in the files that
can be compiled as loadable modules.
Reviewed by: bde
o Axe poll in trap.
o Axe IFF_POLLING flag from if_flags.
o Rework revision 1.21 (Giant removal), in such a way that
poll_mtx is not dropped during call to polling handler.
This fixes problem with idle polling.
o Make registration and deregistration from polling in a
functional way, insted of next tick/interrupt.
o Obsolete kern.polling.enable. Polling is turned on/off
with ifconfig.
Detailed kern_poll.c changes:
- Remove polling handler flags, introduced in 1.21. The are not
needed now.
- Forget and do not check if_flags, if_capenable and if_drv_flags.
- Call all registered polling handlers unconditionally.
- Do not drop poll_mtx, when entering polling handlers.
- In ether_poll() NET_LOCK_GIANT prior to locking poll_mtx.
- In netisr_poll() axe the block, where polling code asks drivers
to unregister.
- In netisr_poll() and ether_poll() do polling always, if any
handlers are present.
- In ether_poll_[de]register() remove a lot of error hiding code. Assert
that arguments are correct, instead.
- In ether_poll_[de]register() use standard return values in case of
error or success.
- Introduce poll_switch() that is a sysctl handler for kern.polling.enable.
poll_switch() goes through interface list and enabled/disables polling.
A message that kern.polling.enable is deprecated is printed.
Detailed driver changes:
- On attach driver announces IFCAP_POLLING in if_capabilities, but
not in if_capenable.
- On detach driver calls ether_poll_deregister() if polling is enabled.
- In polling handler driver obtains its lock and checks IFF_DRV_RUNNING
flag. If there is no, then unlocks and returns.
- In ioctl handler driver checks for IFCAP_POLLING flag requested to
be set or cleared. Driver first calls ether_poll_[de]register(), then
obtains driver lock and [dis/en]ables interrupts.
- In interrupt handler driver checks IFCAP_POLLING flag in if_capenable.
If present, then returns.This is important to protect from spurious
interrupts.
Reviewed by: ru, sam, jhb
the softc.
- Use callout_init_mtx() and rather than timeout/untimeout in both rl(4)
and re(4).
- Fix locking for ifmedia by locking the driver in the ifmedia handlers
rather than in the miibus functions. (re(4) didn't lock the mii stuff
at all!)
- Fix some locking in re_ioctl().
Note: the two drivers share the same softc declared in if_rlreg.h, so they
had to be change simultaneously.
MFC after: 1 week
Tested by: several on rl(4), none on re(4)
control register and AGP bridge seems to be inconsistent with some BIOS.
Instead of relying on BIOS settings, we just take the initial aperture size
and encode them for both miscellaneous control register and AGP bridge.
Some idea was borrowed from agp_nvidia.c.
- Add preliminary ULi M1689 chipset support. The idea was taken from Linux
because hardware and documentation are unavailable. Not tested.
- Add more VIA chipset PCI IDs taken from Linux driver.
Approved by: anholt (mentor)
Tested by: Adam Gregoire <ebola at psychoholics dot org>
Ganael Laplanche <ganael.laplanche at martymac dot com>
K Wieland <kwieland at wustl dot edu>
replacement and has additional features which make it superior.
Discussed on: -arch
Reviewed by: thompsa
X-MFC-after: never (RELENG_6 as transition period)
- Remove sis_unit and use device_printf() and if_printf() instead.
- Use callout_init_mtx() for the callout.
- Remove spls.
- Fix locking for ifmedia to happen in the ifmedia handlers rather than in
sis_ioctl().
- Log an error message if we fail to allocate any resources. Perform
cleanup if we fail to allocate any resources so that we don't leave
a mutex hanging around.
Tested by: Jason Tsai jason dot tsai at newcyberian dot com (1-4)
MFC after: 3 days
the Linux driver, since specs are unavailable. Many thanks to Adam Kirchhoff
for multiple useful testing cycles, and Ralf Wostrack for the final fix to get
it working.
PR: i386/75251
Submitted by: anholt
9200 according to one responder. The primary issue was not setting some bits
to say that the entries were active, but also fix one place where some memory
wasn't being used as volatile as it should. While here, change some use of ffs
to a relatively short case statement, to make it more obvious what's going on.
PR: kern/71638, kern/72372, kern/71547?
Submitted by: Andrew J. Caines <A.J.Caines@halplant.com>,
Robin Schoonover <end@endif.cjb.net>,
Jason Henson <jason@ec.rr.com>
attempts to deallocate busdma tags and resources that haven't been
allocated yet, causing a panic every time a dc interface fails to
attach. Fix by checking that we really have something to dealloc
before calling bus_dma*() functions.
Approved by: jhb
MFC after: 1 week
- Use callout_init_mtx() and static callouts rather than timeout().
- m_getcl() in one place to simplify the code.
Tested by: Gavin Atkinson gavin dot atkinson at ury dot york dot ac dot uk
MFC after: 1 week
- Add locked variants of start(), init(), ifmedia_upd(), and poll() and stop
recursing on the driver lock.
- Add locking to ifmedia_upd() and ifmedia_sts().
- Use callout_*() instead of timeout/untimeout.
- Fix locking in ioctl().
Tested by: Bob Bishop rb at gid dot co dot uk
MFC after: 3 days
tulip_mbuf_compress(). If we fail to allocate a new mbuf to copy the
data into, put the mbuf back in the driver's send queue so that we can
retry it later rather than throwing the packet away.
- Use m_devget() instead of doing it inline ourselves in the
TULIP_COPY_RXDATA case. If we fail to allocate an mbuf to copy the data
into, don't forget about the original mbuf cluster. The old code would
lose the pointer and leak the cluster in that case. Now it doesn't lose
it but always sticks the original rx buffer back into the receive ring
after trying to copy the data out and send it up the stack. Also, if we
fail to allocate a new mbuf to copy the data into, log an input error.
Also, don't combine the priming case with the received-a-packet case to
make the code flow a bit clearer and easier to follow.
- Remove form feed characters.
- Fixup style of function declarations.
- Assume that an mbuf cluster is big enough to hold an ethernet frame.
(This should really be using m_defrag(), but this diff is just simple
changes for now.)
- Allocate arrays of metadata for the descriptors in the rx and tx rings
and change the ring pointers to walk the metadata array rather than the
actual descriptor rings. Each metadata object contains a pointer to its
descriptor, a pointer to any associated mbuf, and a pointer to the
associated bus_dmamap_t in the bus_dma case. The mbuf pointers replace
the tulip_txq and tulip_rxq local ifqueue's in the softc.
- Add lots of KTR trace entries using a local KTR_TULIP level which
defaults to 0, but can be changed to KTR_DEV at the top of the file
when debugging.
- Rename tulip_init(), tulip_start(), tulip_ifinit(), and tulip_ifstart()
to tulip_init_locked(), tulip_start_locked(), tulip_init(), and
tulip_start(), respectively, to match the convention in other drivers.
- Add a TULIP_SP_MAC() macro to encode two bytes of the MAC address into
the setup buffer and use that in place of lots of BYTE_ORDER #ifdef's.
Also, remove an incorrect XXX comment I added earlier, the driver was
correct (at least it does the same thing dc(4) does). TULIP_SP_MAC
was shamelessly copied from DC_SP_MAC() in dc(4).
- Remove the #ifdef'd NetBSD bus-dma code and replace it with FreeBSD
bus-dma code that not only compiles but even works at runtime.
- Use callout_init_mtx() instead of just callout_init().
- Correct the various wrapper macros for bus_dmamap_sync() for the rx
and tx buffers to only ask for the sync ops that they actually need.
- Tidy the #ifdef TULIP_COPY_RXDATA code by expanding an #ifdef a bit
so it becomes easier to read at the expense of a couple of duplicated
lines of code. Also, use m_getcl() to get an mbuf cluster rather than
MGETHDR() followed by MCLGET().
- Maintain the ring free (ri_free) count for the rx ring metadata since
we no longer have tulip_rxq.ifq_len around to indicate how many mbuf's
are currently in the rx ring.
- Add code to teardown bus_dma resources when attach fails and generally
fixup attach to do a better job of cleaning up when it fails. This
gets us a good bit closer to possibly having a detach method someday
and making this driver an unloadable module.
- Add some functions that can be called from ddb to dump the state of
a descriptor ring and to dump the state of an individual descriptor.
- Various comment grammer and spelling fixes.
I have bus-dma turned on by default, but I've left the non-bus-dma code
around so that it can be turned off to aid in debugging should any problems
turn up later on. I'll be removing the non-bus-dma code in a subsequent
commit.
- Remove a lot of superfluous locking during attach. There is no need
to lock access to the driver until some other thread has a way of getting
to it. For ethernet drivers the other ways include registering an
interrupt handler via bus_setup_intr(), calling ether_ifattach() to hook
into the network stack, and kicking off a callout-driven timer via
callout_reset().
- Use callout_* rather than timeout/untimeout.
- Break out of xl_rxeof() if IFF_DRV_RUNNING is clear after ifp->if_input
returns to handle the case where the interface was stopped while we were
passing a packet up the stack. Don't call xl_rxeof() in xl_rxeof_task()
unless IFF_DRV_RUNNING is set. With these fixes in place, any
outstanding task will gracefully terminate as soon as it gets a chance to
run after the interface has been stopped via xl_stop(). As a result,
taskqueue_drain() is no longer required in xl_stop(). The task is still
drained in detach() however to make sure that detach() can safely destroy
the driver mutex at the end of the function.
- Lock the driver lock in the ifmedia callouts and don't lock across
ifmedia_ioctl() in xl_ioctl().
Note: glebius came up with most of (3) as well independently. I took a
rather roundabout way of arriving at the same conclusion.
MFC after: 3 days
- Add locked versions of start and init. The SRM_MEDIA code in dc_init()
stayed in dc_init() instead of moving to dc_init_locked() to make the
locking saner.
- Use callout_init_mtx().
- Fixup locking in detach and ioctl.
- Lock the driver in the ifmedia callouts.
- Don't recurse on the driver lock.
- De-spl.
MFC after: 3 days
- Add locked variants of start, init, and ifmedia_upd.
- Use callout_* instead of timeout/untimeout.
- Don't recurse on the driver lock.
- Fixup locking in ioctl.
- Lock the driver lock in the ifmedia handlers rather than across
ifmedia_ioctl().
Tested by: brueffer
MFC after: 3 days
- Don't set IFF_ALLMULTI in our ifnet's if_flags if we end up allowing
all multicast due to limits in the MAC receive filters in hardware.
Requested by: rwatson (2)
