- Get rid of the ifl_vm_addrs array. It is not used by any existing
consumer, so we are just dirtying a couple of cache lines for no
reason.
- Use uma_zalloc(fl->ifl_zone) instead of m_cljget(). Otherwise
m_cljget() is doing unnecessary work to look up the correct zone, when
iflib already knows what that zone is.
- ifl_gen is only used when INVARIANTS is on, so make that more clear.
- Fix some style nits and inconsistencies.
Reviewed by: gallatin
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25490
When refilling an rx freelist, make sure we only update the hardware
producer index if at least one cluster was allocated. Otherwise the
NIC is programmed to write a previously used cluster, typically
resulting in a use-after-free when packet data is written by the
hardware.
Also make sure that we don't update the fragment index cursor if the
last allocation attempt didn't succeed. For at least Intel drivers,
iflib assumes that the consumer index and fragment index cursor stay in
lockstep, but this assumption was violated in the face of cluster
allocation failures.
Reported and tested by: pho
Reviewed by: gallatin, hselasky
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25489
In the current iflib_netmap_rxsync, there is nothing that prevents
kring->nr_hwtail to overrun kring->nr_hwcur during the descriptor
import phase. This may cause errors in netmap applications, such as:
em1 RX0: fail 'head < kring->nr_hwcur || head > kring->nr_hwtail'
h 795 c 795 t 282 rh 795 rc 795 rt 282 hc 282 ht 282
Reviewed by: gallatin
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25252
- a cloneattach failure will not currently be handled correctly,
jump to the right target
- pseudo devices are all treat as if they're ethernet devices -
this often doesn't make sense
MFC after: 1 week
Sponsored by: Netgate, Inc.
Differential Revision: https://reviews.freebsd.org/D25083
In the receive interrupt routine, always call netmap_rx_irq().
The latter function will return != NM_IRQ_PASS if netmap is not
active on that specific receive queue, so that the driver can go
on with iflib_rxeof(). Note that netmap supports partial opening,
where only a subset of the RX or TX rings can be open in netmap mode.
Checking the IFCAP_NETMAP flag is not enough to make sure that the
queue is indeed in netmap mode.
Moreover, in case netmap_rx_irq() returns NM_IRQ_RESCHED, it means
that netmap expects the driver to call netmap_rx_irq() again as soon
as possible. Currently, this may happen when the device is attached
to a VALE switch.
Reviewed by: gallatin
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25167
With a length of 16, the name ("<if name>:TX(<qid>):callout") typically
gets truncated.
PR: 245712
Reported by: ghuckriede@blackberry.com
MFC after: 1 week
This patch is intended to solve a specific problem that iavf(4)
encounters, but what it does can be extended to solve other issues.
To summarize the iavf(4) issue, if the PF driver configures VLAN
anti-spoof, then the VF driver needs to make sure no untagged traffic is
sent if a VLAN is configured, and vice-versa. This can be an issue when
a VLAN is being registered or unregistered, e.g. when a packet may be on
the ring with a VLAN in it, but the VLANs are being unregistered. This
can cause that tagged packet to go out and cause an MDD event.
To fix this, include a new interface-dependent function that drivers can
implement named IFDI_NEEDS_RESTART(). Right now, this function is called
in iflib_vlan_unregister/register() to determine whether the interface
needs to be stopped and started when a VLAN is registered or
unregistered. The default return value of IFDI_NEEDS_RESTART() is true,
so this fixes the MDD problem that iavf(4) encounters, since the
interface rings are flushed during a stop/init.
A future change to iavf(4) will implement that function just in case the
default value changes, and to make it explicit that this interface reset
is required when a VLAN is added or removed.
Reviewed by: gallatin@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D22086
taskqgroup initialization was broken into two steps:
1. allocate the taskqgroup structure, at SI_SUB_TASKQ;
2. initialize taskqueues, start taskqueue threads, enqueue "binder"
tasks to bind threads to specific CPUs, at SI_SUB_SMP.
Step 2 tries to handle the case where tasks have already been attached
to a queue, by migrating them to their intended queue. In particular,
tasks can't be enqueued before step 2 has completed. This breaks NFS
mountroot on systems using an iflib-based driver when EARLY_AP_STARTUP
is not defined, since mountroot happens before SI_SUB_SMP in this case.
Simplify initialization: do all initialization except for CPU binding at
SI_SUB_TASKQ. This means that until CPU binding is completed, group
tasks may be executed on a CPU other than that to which they were bound,
but this should not be a problem for existing users of the taskqgroup
KPIs.
Reported by: sbruno
Tested by: bdragon, sbruno
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24188
ThunderX cluster systems are panicking on boot with a failed assertion
MPASS(gtask != NULL && gtask->gt_taskqueue != NULL). Split the
assertion so that it's clear which part is failing.
ifsd_cidx is never used, and the line removed from rxd_frag_to_sd() is
just dead code.
Reviewed by: erj, gallatin
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23951
The vmx driver is an example of an iflib driver that might report
packets using non-contiguous descriptors (with unused descriptors
either between received packets or between the fragments of a received
packet), so this assertion needs to be removed.
For such drivers, the freelist producer and consumer indexes don't
relate directly to driver ring slots (the driver deals directly with
freelist buffer indexes supplied by iflib during refill, and reports
them with each fragment during packet reception), but do continue to
be used by iflib for accounting, such as determining the number of
ring slots that are refillable.
PR: 243126, 243392, 240628
Reported by: avg, alexandr.oleynikov@gmail.com, Harald Schmalzbauer
Reviewed by: gallatin
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23946
The dmamap for zero-length fragments should not be unloaded, as doing
so breaks the the cluster-reuse logic in _iflib_fl_refill().
All zero-length fragments are now handled by the assemble_segments()
path so that the cluster-reuse logic there does not have to be
replicated in the small-single-fragment-packet path of
iflib_rxd_pkt_get().
Packets consisting entirely of zero-length fragments (which result in
a NULL mbuf pointer) are now properly tolerated. This allows drivers
(such as the vmx driver) to pass such packets to iflib when a
descriptor error occurs during packet reception, the advantage being
that the refill of descriptors associated with the error packet are
handled via the existing iflib machinery without having to duplicate
parts of that machinery in the driver to handle that error case.
Reviewed by: avg, erj, gallatin
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23945
This fixes a bug in iflib freelist management that breaks the required
correspondence between freelist indexes and driver ring slots.
PR: 243126, 243392, 240628
Reported by: avg, alexandr.oleynikov@gmail.com, Harald Schmalzbauer
Reviewed by: avg, gallatin
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23943
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
switch over to opt-in instead of opt-out for epoch.
Instead of IFF_NEEDSEPOCH, provide IFF_KNOWSEPOCH. If driver marks
itself with IFF_KNOWSEPOCH, then ether_input() would not enter epoch
when processing its packets.
Now this will create recursive entrance in epoch in >90% network
drivers, but will guarantee safeness of the transition.
Mark several tested drivers as IFF_KNOWSEPOCH.
Reviewed by: hselasky, jeff, bz, gallatin
Differential Revision: https://reviews.freebsd.org/D23674
When the receive ring cannot be filled with mbufs, due to lack of memory,
no more interrupts may be generated to fill the receive ring later on.
Make sure to have a watchdog, to try refilling the receive ring from time
to time, hopefully when more mbufs are available.
Differential Revision: https://reviews.freebsd.org/D23315
MFC after: 1 week
Reviewed by: gallatin@
Sponsored by: Mellanox Technologies
In upcoming changes ether_input() is going to be changed not
to enter the network epoch. It is going to be responsibility
of network interrupt. In case of iflib - its taskqueue.
While changing link state in iflib_link_state_change(), queues are
marked as IFLIB_QUEUE_IDLE to disable watchdog. Currently, iflib_timer()
watchdog does not check for previous queue status before marking it as
IFLIB_QUEUE_HUNG.
This patch adds check of queue status before marking it as hung.
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
PR: 239240
Submitted by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Reported by: ultima@
Reviewed by: gallatin@, erj@
MFC after: 3 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21712
DMA memory allocations using the bus_dma.h interface are not properly
released in all cases for both Tx and Rx. This causes ~448 bytes of
M_DEVBUF allocations to be leaked.
First, the DMA maps for Rx are not properly destroyed. A slight attempt
is made in iflib_fl_bufs_free to destroy the maps if we're detaching.
However, this function may not be reliably called during detach. Indeed,
there is a comment "asking" if this should be moved out.
Fix this by moving the bus_dmamap_destroy call into iflib_rx_sds_free,
where we already sync and unload the DMA.
Second, the DMA tag associated with the ifr_ifdi descriptor DMA is not
released properly anywhere. Add a call to iflib_dma_free in
iflib_rx_structures_free.
Third, use of NULL as a canary value on the map pointer returned by
bus_dmamap_create is not valid. On some platforms, notably x86, this
value may be NULL. In this case, we fail to properly release the related
resources.
Remove the NULL checks on map values in both iflib_fl_bufs_free and
iflib_txsd_destroy.
With all of these fixes applied, the leaks to M_DEVBUF are squelched,
and iflib drivers now seem to properly cleanup when detaching.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: erj@, gallatin@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D22203
From Jake:
The iflib stack failed to release all of the memory allocated under
M_IFLIB during device detach.
Specifically, the ifmp_ring, the ift_ifdi Tx DMA info, and the ifr_ifdi Rx
DMA info were not being released.
Release this memory so that iflib won't leak memory when a device
detaches.
Since we're freeing the ift_ifdi pointer during iflib_txq_destroy we
need to call this only after iflib_dma_free in iflib_tx_structures_free.
Additionally, also ensure that we destroy the callout mutex associated
with each Tx queue when we free it.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: erj@, gallatin@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D22157
From Jake:
Calling ether_ifdetach after iflib_stop leads to a potential race where
a stale ifp pointer can remain in the route entry list for IPv6 traffic.
This will potentially cause a page fault or other system instability if
the ifp pointer is accessed.
Move both iflib_netmap_detach and ether_ifdetach to be called prior to
iflib_stop. This avoids the race above, and helps ensure that other ifp
references are removed before stopping the interface.
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: erj@, gallatin@, jhb@
MFC after: 3 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D22071
Debugnet is a simplistic and specialized panic- or debug-time reliable
datagram transport. It can drive a single connection at a time and is
currently unidirectional (debug/panic machine transmit to remote server
only).
It is mostly a verbatim code lift from netdump(4). Netdump(4) remains
the only consumer (until the rest of this patch series lands).
The INET-specific logic has been extracted somewhat more thoroughly than
previously in netdump(4), into debugnet_inet.c. UDP-layer logic and up, as
much as possible as is protocol-independent, remains in debugnet.c. The
separation is not perfect and future improvement is welcome. Supporting
INET6 is a long-term goal.
Much of the diff is "gratuitous" renaming from 'netdump_' or 'nd_' to
'debugnet_' or 'dn_' -- sorry. I thought keeping the netdump name on the
generic module would be more confusing than the refactoring.
The only functional change here is the mbuf allocation / tracking. Instead
of initiating solely on netdump-configured interface(s) at dumpon(8)
configuration time, we watch for any debugnet-enabled NIC for link
activation and query it for mbuf parameters at that time. If they exceed
the existing high-water mark allocation, we re-allocate and track the new
high-water mark. Otherwise, we leave the pre-panic mbuf allocation alone.
In a future patch in this series, this will allow initiating netdump from
panic ddb(4) without pre-panic configuration.
No other functional change intended.
Reviewed by: markj (earlier version)
Some discussion with: emaste, jhb
Objection from: marius
Differential Revision: https://reviews.freebsd.org/D21421
As of r347221 the iflib legacy interrupt mode setup assumes that drivers
perform both receive and transmit processing from the interrupt handler.
This assumption is invalid in the vmxnet3 driver, so introduce the
IFLIB_SINGLE_IRQ_RX_ONLY flag to make iflib avoid tx processing in the
interrupt handler.
PR: 239118
Reported and tested by: Juraj Lutter <otis@sk.freebsd.org>
Obtained from: marius
Reviewed by: gallatin
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D21831
TLS 1.3 requires a few changes because 1.3 pretends to be 1.2
with a record type of application data. The "real" record type is
then included at the end of the user-supplied plaintext
data. This required adding a field to the mbuf_ext_pgs struct to
save the record type, and passing the real record type to the
sw_encrypt() ktls backend functions.
Reviewed by: jhb, hselasky
Sponsored by: Netflix
Differential Revision: D21801
From Piotr:
r351152 introduced iflib_deregister() function calling
EVENTHANDLER_DEREGISTER() to unregister VLAN events. This patch removes
duplicate of EVENTHANDLER_DEREGISTER() calls placed in
iflib_device_deregister() as this function is now calling
iflib_deregister(). This is to avoid deregistering same event twice.
This patch also adds check in iflib_vlan_register() to prevent
registering VLAN while being in detach.
Patch co-authored by Krzysztof Galazka <krzysztof.galazka@intel.com>,
erj <erj@FreeBSD.org> and Jacob Keller <jacob.e.keller@intel.com>.
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Submitted by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Reviewed by: gallatin@, erj@
MFC after: 3 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21711
Commit message by Jake:
The iflib_register function exists to allocate and setup some common
structures used by both iflib_device_register and iflib_pseudo_register.
There is no associated cleanup function used to undo the steps taken in
this function.
Both iflib_device_deregister and iflib_pseudo_deregister have some of
the necessary steps scattered in their flow. However, most of the
necessary cleanup is not done during the error path of
iflib_device_register and iflib_pseudo_register.
Some examples of missed cleanup include:
the ifp pointer is not free'd during error cleanup
the STATE and CTX locks are not destroyed during error cleanup
the vlan event handlers are not removed during error cleanup
media added to the ifmedia structure is not removed
the kobject reference is never deleted
Additionally, when initializing the kobject class reference counter is
increased even though kobj_init already increases it. This results in
the class never being free'd again because the reference count would
never hit zero even after all driver instances are unloaded.
To aid in proper cleanup, implement an iflib_deregister function that
goes through the reverse steps taken by iflib_register.
Call this function during the error cleanup for iflib_device_register
and iflib_pseudo_register. Additionally call the function in the
iflib_device_deregister and iflib_pseudo_deregister functions near the
end of their flow. This helps reduce code duplication and ensures that
proper steps are taken to cleanup allocations and references in both the
regular and error cleanup flows.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: shurd@, erj@
MFC after: 3 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21005
If a device has only 1 MSI-X interrupt available and does not support either
MSI or legacy interrupts, iflib_device_register() will fail, leak memory and
MSI resources, and the driver will not load. Worse, if another iflib-using
driver tries to unload afterwards, a kernel panic will occur because the
previous failed iflib driver loead did not properly call "taskqgroup_detach()"
during it's cleanup.
This patch is band-aid for this situation -- don't try allocating MSI or legacy
interrupts if a single MSI-X interrupt was allocated, but fail to load instead.
As well, during the cleanup, properly call taskqgroup_detach() on the admin
task to prevent panics when other iflib drivers unload.
This whole interrupt allocation process actually needs re-doing to properly
support devices with only a single MSI-X interrupt, devices that only support
MSI-X, non-PCI devices, and multiple non-MSIX interrupts, as well.
Signed-off-by: Eric Joyner <erj@freebsd.org>
Reviewed by: marius@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D20747
Commit message from Jake:
In iflib_register, the context is initialized as a kobject using the
device driver's "driver" kobject class. As part of this, the function
mistakenly increments the ref counter.
The ref counter is incremented twice, once in the code directly, and
once again by kobj_class_compile. However, there is no associated
decrement in the detach path. Because of this, the ref counter will
never go back down to zero, and thus the kobject method table will never
be released.
Remove this unnecessary reference count increment.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: jhb@, erj@
MFC after: 3 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21125
Commit text by Jake:
If a driver's IFDI_ATTACH_PRE function fails, the iflib_device_register
function will free the ctx pointer. However, it does not reset the
device softc pointer to NULL.
This will result in memory corruption as a future access to the now
invalid pointer will corrupt memory that is later allocated on top of
the same memory location.
The iflib_device_deregister function correctly resets the softc pointer
by using device_set_softc().
This clears up the invalid dangling pointer and prevents memory
corruption that could lead to a panic or undefined behavior if the
device's driver failed to attach.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: erj@, gallatin@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21003
- Remove desc_used, which is only ever written to.
- Remove a dead store to reclaimed.
- Don't recycle avail.
- Sort variables according to style(9).
These changes will make a subsequent commit easier to read.
o In iflib_tx_credits_update(), don't bother checking whether the
ift_txd_credits_update method pointer is NULL; _iflib_pre_assert()
asserts upfront that this method has been assigned and functions
like iflib_{fast_intr_rxtx,netmap_timer_adjust,txq_can_drain}()
and _task_fn_tx() were already unconditionally relying on the
method being callable.
at runtime. This change removes a dependency on a barrel shifter pass
before branch resolution, while reducing the instruction stream size
by 9 bytes on amd64.
MFC after: 3 days
structs with placeholders (in the latter case, IFLIB_MAX_TX_BYTES
etc. are also only ever used for these write-only members if at all,
so both these macros and members can just go). Using these spares
may render it possible to merge certain iflib(9) fixes to stable/12.
Otherwise, changes extending struct if_irq or struct if_shared_ctx
in any way would break KBI as instances of these are allocated by
the driver front-ends (by contrast, struct if_pkt_info as well as
struct if_softc_ctx instances are provided by iflib(9) and, thus,
may grow at least at the end without breaking KBI).
- Make the pvi_name in struct pci_vendor_info const char * as device
identifiers in hardware lookup tables aren't to be expected to ever
change at runtime.
- Similarly, make the pci_vendor_info_t of struct if_shared_ctx which
is used to point to the struct pci_vendor_info arrays provided by
the driver front-ends const.
- Remove the ETH_ADDR_LEN macro from iflib.h; this was duplicating
ETHER_ADDR_LEN of <net/ethernet.h> with iflib(9) actually only
consuming the latter macro.
- Make the name argument of iflib_io_tqg_attach(9) const, matching
the taskqgroup_attach_cpu(9) this function wraps as well as e. g.
iflib_config_gtask_init(9).
- Remove the orphaned iflib_qset_lock_get() prototype.
- Remove some extraneous empty lines.
From Jake:
Vendor drivers that exist out-of-tree generally should return
BUS_PROBE_VENDOR from their device probe functions. This helps ensure
that a vendor replacement driver will supersede the in-kernel driver for
a given device.
Currently, if a vendor wants to implement a driver based on iflib, it
will always report BUS_PROBE_DEFAULT.
Add a wrapper function, iflib_device_probe_vendor() which can be used in
place of iflib_device_probe(). This function will just return
BUS_PROBE_VENDOR whenever iflib_device_probe() would return
BUS_PROBE_DEFAULT.
While vendor drivers can already implement such a wrapper themselves,
providing it in the iflib.h header makes it easier for the vendor driver
to do the right thing.
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: erj@, gallatin@, marius@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D20221
From Jake:
A user may set a sysctl to override the default number of Tx or Rx
descriptors. However, certain calculations in the iflib core expect the
number of descriptors to be a power of 2.
Update _iflib_assert to verify that all of the shared context parameters
for the number of descriptors are powers of 2.
Modify iflib_reset_qvalues to check that the provided isc_nrxd value is
a power of 2. If it's not, print a warning message and then use the
default value.
An alternative might be to try rounding the number down instead.
However, this creates problems in case the rounded down value is below
the minimum value that the driver would support.
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: marius@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D19880
MSI. Unlike as with iflib_fast_intr_ctx(), the former will also enqueue
_task_fn_tx() in addition to _task_fn_rx() if appropriate, bringing TCP
TX throughput of EM-class devices on par with the MSI-X case and, thus,
close to wirespeed/pre-iflib(4) times again. [1]
Note that independently of the interrupt type, the UDP performance with
these MACs still is abysmal and nowhere near to where it was before the
conversion of em(4) to iflib(4).
o In iflib_init_locked(), announce which free list failed to set up.
o In _task_fn_tx() when running netmap(4), issue ifdi_intr_enable instead
of the ifdi_tx_queue_intr_enable method in case of a "legacy" interrupt
as the latter is valid with MSI-X only.
o Instead of adding the missing - and apparently convoluted enough that a
DBG_COUNTER_INC was put into a wrong spot in _task_fn_rx() - checks for
ifdi_{r,t}x_queue_intr_enable being available in the MSI-X case also to
iflib_fast_intr_rxtx(), factor these out to iflib_device_register() and
make the checks fail gracefully rather than panic. This avoids invoking
the checks at runtime over and over again in iflib_fast_intr_rxtx() and
_task_fn_{r,t}x() - even if it's just in case of INVARIANTS - and makes
these functions more readable.
o In iflib_rx_structures_setup(), only initialize LRO resources if device
and driver have LRO capability in order to not waste memory. Also, free
the LRO resources again if setting them up fails for one of the queues.
However, don't bother invoking iflib_rx_sds_free() in that case because
iflib_rx_structures_setup() doesn't call iflib_rxsd_alloc() either (and
iflib_{device,pseudo}_register() will issue iflib_rx_sds_free() in case
of failure via iflib_rx_structures_free(), but there definitely is some
asymmetry left to be fixed, though).
o Similarly, free LRO resources again in iflib_rx_structures_free().
o In iflib_irq_set_affinity(), handle get_core_offset() errors gracefully
instead of panicing (but only in case of INVARIANTS). This is a follow-
up to r344132, as such driver bugs shouldn't be fatal.
o Likewise, handle unknown iflib_intr_type_t in iflib_irq_alloc_generic()
gracefully, too.
o Bring yet more sanity to iflib_msix_init():
- If the device doesn't provide enough MSI-X vectors or not all vectors
can be allocate so the expected number of queues in addition to admin
interrupts can't be supported, try MSI next (and then INTx) as proper
MSI-X vector distribution can't be assured in such cases. In essence,
this change brings r254008 forward to iflib(4). Also, this is the fix
alluded to in the commit message of r343934.
- If the MSI-X allocation has failed, don't prematurely announce MSI is
going to be used as the latter in fact may not be available either.
- When falling back to MSI, only release the MSI-X table resource again
if it was allocated in iflib_msix_init(), i. e. isn't supplied by the
driver, in the first place.
o In mp_ndesc_handler(), handle unknown type arguments gracefully, too.
PR: 235031 (likely) [1]
Reviewed by: shurd
Differential Revision: https://reviews.freebsd.org/D20175
- Remove the only ever written to ift_db_mtx_name member of struct iflib_txq.
- Remove the unused or only ever written to ifr_size, ifr_cq_pidx, ifr_cq_gen
and ifr_lro_enabled members of struct iflib_rxq.
- Consistently spell DMA, RX and TX uppercase in comments, messages etc.
instead of mixing with some lowercase variants.
- Consistently use if_t instead of a mix of if_t and struct ifnet pointers.
- Bring the function comments of _iflib_fl_refill(), iflib_rx_sds_free() and
iflib_fl_setup() in line with reality.
- Judging problem reports, people are wondering what on earth messages like:
"TX(0) desc avail = 1024, pidx = 0"
are trying to indicate. Thus, extend this string to be more like that of
non-iflib(4) Ethernet MAC drivers, notifying about a watchdog timeout due
to which the interface will be reset.
- Take advantage of the M_HAS_VLANTAG macro.
- Use false/true rather than FALSE/TRUE for variables of type bool.
- Use FALLTHROUGH as advocated by style(9).
It's atypical, but not invalid, for a driver to pass no capabilities.
Submitted by: Gerald Aryeetey <aryeeteygerald_rogers.com>
Reviewed by: shurd
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20142
