If a character cannot be converted to DOS code page,
unix2doschr() returned `0'. As a result, unix2dosfn()
was forced to return `0', so we saw a file which was
composed of these characters as `Invalid argument'.
To correct this, if a character can be converted to
Unicode, unix2doschr() now returns `1' which is a magic
number to make unix2dosfn() know that the character
must be converted to `_'.
[2] unix2dosfn()
The above-mentioned solution only works if a file
has both of Unicode name and DOS code page name.
Unicode name would not be recorded if file name
can be settled within 11 bytes (DOS short name)
and if no conversion from Unix charset to DOS code
page has occurred. Thus, FreeBSD can create a file
which has only short name, but there is no guarantee
that the short name contains allways valid characters
because we leave it to people by using mount_msdosfs(8)
to select which conversion is used between DOS code
page and unix charset.
To avoid this, Unicode file name should be recorded
unless a character is an ascii character. This is
the way Windows XP do.
PR: 77074 [1]
MFC after: 1 week
process that caused the clone event to take place for the device driver
creating the device. This allows cloned device drivers to adapt the
device node based on security aspects of the process, such as the uid,
gid, and MAC label.
- Add a cred reference to struct cdev, so that when a device node is
instantiated as a vnode, the cloning credential can be exposed to
MAC.
- Add make_dev_cred(), a version of make_dev() that additionally
accepts the credential to stick in the struct cdev. Implement it and
make_dev() in terms of a back-end make_dev_credv().
- Add a new event handler, dev_clone_cred, which can be registered to
receive the credential instead of dev_clone, if desired.
- Modify the MAC entry point mac_create_devfs_device() to accept an
optional credential pointer (may be NULL), so that MAC policies can
inspect and act on the label or other elements of the credential
when initializing the skeleton device protections.
- Modify tty_pty.c to register clone_dev_cred and invoke make_dev_cred(),
so that the pty clone credential is exposed to the MAC Framework.
While currently primarily focussed on MAC policies, this change is also
a prerequisite for changes to allow ptys to be instantiated with the UID
of the process looking up the pty. This requires further changes to the
pty driver -- in particular, to immediately recycle pty nodes on last
close so that the credential-related state can be recreated on next
lookup.
Submitted by: Andrew Reisse <andrew.reisse@sparta.com>
Obtained from: TrustedBSD Project
Sponsored by: SPAWAR, SPARTA
MFC after: 1 week
MFC note: Merge to 6.x, but not 5.x for ABI reasons
This is good enough to be able to run a RELENG_4 gdb binary against
a RELENG_4 application, along with various other tools (eg: 4.x gcore).
We use this at work.
ia32_reg.[ch]: handle the 32 bit register file format, used by ptrace,
procfs and core dumps.
procfs_*regs.c: vary the format of proc/XXX/*regs depending on the client
and target application.
procfs_map.c: Don't print a 64 bit value to 32 bit consumers, or their
sscanf fails. They expect an unsigned long.
imgact_elf.c: produce a valid 32 bit coredump for 32 bit apps.
sys_process.c: handle 32 bit consumers debugging 32 bit targets. Note
that 64 bit consumers can still debug 32 bit targets.
IA64 has got stubs for ia32_reg.c.
Known limitations: a 5.x/6.x gdb uses get/setcontext(), which isn't
implemented in the 32/64 wrapper yet. We also make a tiny patch to
gdb pacify it over conflicting formats of ld-elf.so.1.
Approved by: re
ioctl numbers in backwards compatability mode. eg: an IOC_IN ioctl with
a size of zero. Traditionally this was what you did before IOC_VOID
existed, and we had some established users of this in the tree, namely
procfs. Certain 3rd party drivers with binary userland components also
have this too.
This is necessary to have 4.x and 5.x binaries use these ioctl's. We
found this at work when trying to run 4.x binaries.
Approved by: re
To check a directory's in-use bitmap bit by bit, we use
a pointer to an 8 bit wide unsigned value.
The index used to dereference this pointer is calculated
by shifting the bit index right 3 bits. Then we do a
logical AND with the bit# represented by the lower 3
bits of the bit index.
This is an idiomatic way of iterating through a bit map
with simple bitwise operations.
This commit fixes the bug that we only checked bits
3:0 of each 8 bit chunk, because we only used bits 1:0
of the bit index for the bit# in the current 8 bit value.
This resulted in files not being returned by getdirentries(2).
Change the type of the bit map pointer from `char *' to
`u_int8_t *'.
perfect solution as the lower vm object can change at unpredictable times
if our lower vp happens to be on another unionfs, etc.
Submitted by: Oleg Sharoiko <os@rsu.ru>
Since the name cache is case-sensitive and msdosfs isn't,
creating a file 'foo' won't invalidate a negative entry for 'FOO'.
There are similar problems related to 8.3 filenames.
A better solution is to override VOP_LOOKUP with a method that
canonicalizes the name, then calls vfs_cache_lookup(). Unfortunately,
it's not quite that simple because vfs_cache_lookup() will call
msdosfs_lookup() on a cache miss, and msdosfs_lookup() needs a way to
get at the original component name.
than WIN_CHARS bytes, we shift the suffix (previous substrings) upwards
by the amount this substring exceeds its WIN_CHARS slot. Profiling shows
this change is indistinguishable from the previous code at 95% confidence.
This bug would result in attempts to access or create files or directories
with multi-byte characters returning an error but no data loss.
Reported and tested by: avatar
MFC after: 3 days
- Only unlock the directory if this is a DOTDOT lookup. Previously this
code could have deadlocked if there was a DOTDOT lookup with LOCKPARENT
set and another thread was locking the other way up the tree.
Sponsored by: Isilon Systems, Inc.
handled in vfs_lookup.c. This code was missing PDIRUNLOCK use prior
to the removal of PDIRUNLOCK in rev 1.73 of vfs_lookup.c.
Sponsored by: Isilon Systems, Inc.
handled in vfs_lookup.c. This code was missing PDIRUNLOCK use prior
to the removal of PDIRUNLOCK in rev 1.73 of vfs_lookup.c.
Sponsored by: Isilon Systems, Inc.
- In the ISDOTDOT case we have to unlock the dvp before locking the child,
if this fails we must relock dvp before returning an error. This was
missing before.
Sponsored by: Isilon Systems, Inc.
- Network filesystems are written with a special idiom that checks the
cache first, and may even unlock dvp before discovering that a network
round-trip is required to resolve the name. I believe dvp is prevented
from being recycled even in the forced unmount case by the shared lock
on the mount point. If not, this code should grow checks for VI_DOOMED
after it relocks dvp or it will access NULL v_data fields.
Sponsored by: Isilon Systems, Inc.
these filesystems will support shared locks until they are explicitly
modified to do so. Careful review must be done to ensure that this
is safe for each individual filesystem.
Sponsored by: Isilon Systems, Inc.
these filesystems will support shared locks until they are explicitly
modified to do so. Careful review must be done to ensure that this
is safe for each individual filesystem.
Sponsored by: Isilon Systems, Inc.
that they set v->v_vnlock. This is true for all filesystems in the
tree.
- Remove all uses of LK_THISLAYER. If the lower layer is locked, the
null layer is locked. We only use vget() to get a reference now.
null essentially does no locking. This fixes LOOKUP_SHARED with
nullfs.
- Remove the special LK_DRAIN considerations, I do not believe this is
needed now as LK_DRAIN doesn't destroy the lower vnode's lock, and
it's hardly used anymore.
- Add one well commented hack to prevent the lowervp from going away
while we're in it's VOP_LOCK routine. This can only happen if we're
forcibly unmounted while some callers are waiting in the lock. In
this case the lowervp could be recycled after we drop our last ref
in null_reclaim(). Prevent this with a vhold().
as suggested by Matt's comment. Also fix some style and paranoia issues.
The entire function could benefit from review by a VFS guru.
MFC after: 6 weeks
Since we used an sbuf of size resid to accumulate dirents, we would end
up returning one byte short when we had enough dirents to fill or exceed
the size of the sbuf (the last byte being lost to bogus NUL termination)
causing the next call to return EINVAL due to an unaligned offset. This
went undetected for a long time because I did most of my testing in
single-user mode, where there are rarely enough processes to fill the
4096-byte buffer ls(1) uses. The most common symptom of this bug is that
tab completion of /proc or /compat/linux/proc does not work properly when
many processes are running.
Also, a check near the top would return EINVAL if resid was smaller than
PFS_DELEN, even if it was 0, which is frequently the case and perfectly
allowable. Change the test so that it returns 0 if resid is 0.
MFC after: 2 weeks
the filesystem. Check that rather than VI_XLOCK.
- VOP_INACTIVE should no longer drop the vnode lock.
- The vnode lock is required around calls to vrecycle() and vgone().
Sponsored by: Isilon Systems, Inc.
vnode lock. Remove the c_lock and use the vn lock in its place.
- Keep the coda lock functions so that the debugging information is
preserved, but call directly to the vop_std*lock routines for the real
functionality.
Sponsored by: Isilon Systems, Inc.
long filename. Each substring is indexed by the windows ID, a
sequential one-based value. The previous code was extremely slow,
doing a malloc/strcpy/free for each substring.
This code optimizes these routines with this in mind, using the ID
to index into a single array and concatenating each WIN_CHARS chunk
at once. (The last chunk is variable-length.)
This code has been tested as working on an FS with difficult filename
sizes (255, 13, 26, etc.) It gives a 77.1% decrease in profiled
time (total across all functions) and a 73.7% decrease in wall time.
Test was "ls -laR > /dev/null".
Per-function time savings:
mbnambuf_init: -90.7%
mbnambuf_write: -18.7%
mbnambuf_flush: -67.1%
MFC after: 1 month
List devfs_dirents rather than vnodes off their shared struct cdev, this
saves a pointer field in the vnode at the expense of a field in the
devfs_dirent. There are often 100 times more vnodes so this is bargain.
In addition it makes it harder for people to try to do stypid things like
"finding the vnode from cdev".
Since DEVFS handles all VCHR nodes now, we can do the vnode related
cleanup in devfs_reclaim() instead of in dev_rel() and vgonel().
Similarly, we can do the struct cdev related cleanup in dev_rel()
instead of devfs_reclaim().
rename idestroy_dev() to destroy_devl() for consistency.
Add LIST_ENTRY de_alias to struct devfs_dirent.
Remove v_specnext from struct vnode.
Change si_hlist to si_alist in struct cdev.
String new devfs vnodes' devfs_dirent on si_alist when
we create them and take them off in devfs_reclaim().
Fix devfs_revoke() accordingly. Also don't clear fields
devfs_reclaim() will clear when called from vgone();
Let devfs_reclaim() call dev_rel() instead of vgonel().
Move the usecount tracking from dev_rel() to devfs_reclaim(),
and let dev_rel() take a struct cdev argument instead of vnode.
Destroy SI_CHEAPCLONE devices in dev_rel() (instead of
devfs_reclaim()) when they are no longer used. (This
should maybe happen in devfs_close() instead.)
mounted (is it Joliet, RockRidge, High Sierra) based on bootverbose.
Most file systems don't generate log messages based on details of the
file system superblock, and these log messages disrupt sysinstall output
during a new install from CD. We may want to explore exposing this
status information using nmount() at some point.
MFC after: 3 days
on my P3, microbenchmarks show the unrolled version is 78x faster. In
actual use (recursive ls), this gives an average of 9% improvement in
system time and 2% improvement in wall time.
called in "open", causing mmap() to fail.
Where possible, pass size of file to vnode_create_vobject() rather
than having it find it out the hard way via VOP_LOOKUP
Reviewed by: phk
mmap() on NTFS files was hosed, returning pages offset from the
start of the disk rather than the start of the file. (ie, "cp" of
a 1-block file would get you a copy of the boot sector, not the
data in the file.) The solution isn't ideal, but gives a functioning
filesystem.
Cached vnode lookup was also broken, resulting in vnode haemorrhage.
A lookup on the same file twice would give you two vnodes, and the
resulting cached pages.
Just recently, mmap() was broken due to a lack of a call to
vnode_create_vobject() in ntfs_open().
Discussed with: phk@
with NFS.
We are moving responsibility for creating the vnode_pager object into
the filesystems which own the vnode, and this is one of the places
we have to cover.
We call vnode_create_vobject() directly because we own the vnode.
If we can get the size easily, pass it as an argument to save the
call to VOP_GETATTR() in vnode_create_vobject()
and KASSERT coverage.
After this check there is only one "nasty" cast in this code but there
is a KASSERT to protect against the wrong argument structure behind
that cast.
Un-inlining the meat of VOP_FOO() saves 35kB of text segment on a typical
kernel with no change in performance.
We also now run the checking and tracing on VOP's which have been layered
by nullfs, umapfs, deadfs or unionfs.
Add new (non-inline) VOP_FOO_AP() functions which take a "struct
foo_args" argument and does everything the VOP_FOO() macros
used to do with checks and debugging code.
Add KASSERT to VOP_FOO_AP() check for argument type being
correct.
Slim down VOP_FOO() inline functions to just stuff arguments
into the struct foo_args and call VOP_FOO_AP().
Put function pointer to VOP_FOO_AP() into vop_foo_desc structure
and make VCALL() use it instead of the current offsetoff() hack.
Retire vcall() which implemented the offsetoff()
Make deadfs and unionfs use VOP_FOO_AP() calls instead of
VCALL(), we know which specific call we want already.
Remove unneeded arguments to VCALL() in nullfs and umapfs bypass
functions.
Remove unused vdesc_offset and VOFFSET().
Generally improve style/readability of the generated code.
I'm not sure why a credential was added to these in the first place, it is
not used anywhere and it doesn't make much sense:
The credentials for syncing a file (ability to write to the
file) should be checked at the system call level.
Credentials for syncing one or more filesystems ("none")
should be checked at the system call level as well.
If the filesystem implementation needs a particular credential
to carry out the syncing it would logically have to the
cached mount credential, or a credential cached along with
any delayed write data.
Discussed with: rwatson
