Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Instead of using GID_FT SNS request to get list of registered FCP ports,
use GID_PT to get list of all Nx_Ports, and then use GFF_ID and/or GFT_ID
requests to find whether they are FCP and target capable.
The problem with old approach is that GID_FT does not report ports without
FC-4 type registered. In particular it was impossible to boot OS from
FreeBSD FC target using QLogic FC BIOS, since one does not register FC-4
type even on new cards and so ignored by old code as incompatible.
As a side bonus this allows initiator to skip pointless logins to other
initiators by fetching that information from SNS instead.
In case some switches do not implement GFF_ID/GFT_ID correctly, add sysctls
to disable that functionality. I handled broken GFF_ID of my Brocade 200E,
but there may be other switches with different bugs.
Linux also uses GID_PT, but GFF_ID is disabled by default there, and GFT_ID
is not supported.
Sponsored by: iXsystems, Inc.
Prior to this change, the CRN (Command Reference Number) is reset on any
firmware LIP, LOOP DOWN, or LOOP RESET event in violation of FCP-4 which
specifies that the CRN should only be reset in response to a LIP Reset
(LIPyx) primitive. FCP-4 also indicates PLOGI/LOGO and PRLI/PRLO ELS
actions as conditions for resetting the CRN for the associated initiator
port.
These violations manifest themselves when the HBA is removed from the
loop, or a target device is removed (especially during an outstanding
command) without power cycling. If the HBA and and the target device
determine upon re-establishing the loop that no PLOGI or PRLI is
required, and the target does not issue a LIPxy to the initiator, the
CRN for the target will have been improperly reset by the isp driver. As
a result, the target port will silently ignore all FCP commands issued
during the device probe (which will time out) preventing the device from
attaching.
This change corrects thie CRN reset behavior in response to loop state
changes, also introduces CRN resets for the above mentioned ELS actions
as encountered through async PDB change events.
This change also adds cleanup of outstanding commands in isp_loop_dead()
that was previously missing.
sys/dev/isp/isp.c
Add the last login state to debug output when syncing the pdb
sys/dev/isp/isp_freebsd.c
Replace binary statement setting aborted ccb status in
isp_watchdog() with the XS_SETERR macro used elsewhere
In isp_loop_dead(), abort or complete pending commands as done
in isp_watchdog()
In isp_async(), segregate the ISPASYNC_LOOP_RESET action from
ISPASYNC_LIP, ISPASYNC_LOOP_DOWN, and ISPASYNC_LOOP_UP
fallthroughs, and only reset the CRN in the RESET case. Also add
checks to handle false LOOP RESET actions that do not have a
proper associated LIP primitive, and log the primitive in the
debug messages
In isp_async(), remove the goto from ISP_ASYNC_DEV_STAYED, and
only reset the CRN in the DEV_CHANGED action
In isp_async(), when processing an ISPASYNC_CHANGE_PDB status,
reset CRN(s) for the associated nphdl (or all ports) if the
change reason is some form of ELS login/logout. Also remove
assignment to fc since it is not used in the scope
sys/dev/isp/ispmbox.h
Add macro definition for the global N-Port handle, and correct a
macro typo 'PDB24XX_AE_PRLI_DONJE'
sys/dev/isp/ispvar.h
Add macros FCP_AL_DA_ALL, FCP_AL_PA, and FCP_IS_DEST_ALPD for
more legible code when determining if an AL_PD port matches the
portid for a given struct fcparam* by value or by virtue of the
AL_PD port being 0xFF
Submitted by: Reid Linnemann
Sponsored by: Spectra Logic
MFC after: 1 week
Let firmware do its best first, and if it can't, try software recovery.
I would remove software timeout handler completely, but found bunch of
complains on command timeout on sparc64 mailing list few years ago, so
better be safe in case of interrupt loss.
MFC after: 2 weeks
For 24xx and above use 2 vectors (default and response queue).
For 26xx and above use 3 vectors (default, response and ATIO queues).
Due to global lock interrupt hardlers never run simultaneously now, but
at least this allows to save one regitster read per interrupt.
MFC after: 2 weeks
Since we support RQSTYPE_RPT_ID_ACQ, that functionality is only useful
in loop mode, which probably doesn't worth having this hack in 2017.
MFC after: 2 weeks
Instead of single isp_intr() function doing all possible magic, introduce
four different functions to handle mailbox operation completions, async
events, response and ATIO queues. The goal is to isolate different code
paths to make code more readable, and to make easier support for multiple
interrupt vectors. Even oldest hardware in many cases can identify what
code path it should run on interrupt. Contemporary hardware can assign
them to different interrupt vectors.
MFC after: 2 weeks
It was implemented to reduce context switches when uploading firmware to
card's RAM. But this mechanism is not used last 10 years since all mbox
operations are now polled, and it was never used for cards produced in
last 15 years. Newer cards can use DMA to upload firmware.
MFC after: 2 weeks
This change fixes DMA resource leak on driver unload. Also it removes
DMA resources allocation for hardcoded number of requests before fetching
the real number from firmware. Also it prepares ground for more flexible
IRQs allocation according to firmware capabilities.
MFC after: 2 weeks
Firmware automatically logs in only to local loop ports, and those ports
can be easily identified without extra flag by zero domain and area IDs.
MFC after: 1 week
This should close the race between request arriving on new target mode
virtual port and its scanner thread finally fetch its address for request
routing.
For some reason firmware sends Port Database Changed notifications in case
of explicit login requests from the driver when target port is unavailabe.
Those notifications don't give driver any new information, but only cause
infinite scan loop.
Usually IOCBs should be put on queue for asynchronous processing and should
not require additional DMA memory. But there are some cases like aborts and
resets that for external reasons has to be synchronous. Give those cases
separate 2*64 byte DMA area to decouple them from other DMA scratch area
users, using it for asynchronous requests.
This space does not require DMA syncing. It reduces lock scope of the DMA
scratch space. It allows whole DMA scratch space to be used to I/O, so now
we can fetch up to ~1000 ports from SNS.
Due to the last fact, increase maximal number of ports from 256 to 1024.
Before this change virtual ports control IOCBs were executed synchronously
via Execute IOCB mailbox command. It required exclusive use of scratch
space of driver and mailbox registers of the hardware. Because of that
shared resources use this code could not really sleep, having to spin for
completion, blocking any other operation.
This change introduces new asynchronous design, sending the IOCBs directly
on request queue and gracefully waiting for their return on response queue.
Returned IOCBs are identified with unified handle space from r292725.
I am not sure why this was split long ago, but I see no reason for it.
At this point this unification just slightly reduces memory usage, but
as next step I plan to reuse shared handle space for other IOCB types.
- Make scan aborted by event restart immediately and infinitely.
- Improve handling of some loop events from firmware.
- Remove loop down timer, adding its functionality to scanner thread.
- Some more unification and simplification.
Hacks to enable target mode there complicated code, while didn't really
work. And for outdated hardware fixing it is not really interesting.
Initiator mode tested with Qlogic 1080 adapter is still working fine.
For those chips we are not receiving login events, adding initiators
based on ATIO requests. But there is no port ID in that structure, so
in fabric mode we have to explicitly fetch it from firmware to be able
to do normal scan after that.
This change simplifies and unifies port adding/updating for loop and
fabric scanners. It also fixes problems with scanning restarts due to
concurrent port databases changes. It also fixes many cosmetic issues.
Aside from cleaner and more consistent code, this allows ports to be both
target and initiator same time, and easily switch from any role to any.
Sponsored by: iXsystems, Inc.
FreeBSD never had limitation on number of target IDs, and there is no
any other requirement to allocate them densely. Since slots of port
database already populated just sequentially, there is no much need
for another indirection to allocate sequentially too.
and not automatically come back if they were gone for a short
period of time.
The isp(4) driver has a 30 second gone device timer that gets
activated whenever a device goes away. If the device comes back
before the timer expires, we don't send a notification to CAM that
it has gone away. If, however, there is a command sent to the
device while it is gone and before it comes back, the isp(4) driver
sends the command back with CAM_SEL_TIMEOUT status.
CAM responds to the CAM_SEL_TIMEOUT status by removing the device.
In the case where a device comes back within the 30 second gone
device timer window, though, we weren't telling CAM the device
came back.
So, fix this by tracking whether we have told CAM the device is
gone, and if we have, send a rescan if it comes back within the 30
second window.
ispvar.h:
In the fcportdb_t structure, add a new bitfield,
reported_gone. This gets set whenever we return a command
with CAM_SEL_TIMEOUT status on a Fibre Channel device.
isp_freebsd.c:
In isp_done(), if we're sending CAM_SEL_TIMEOUT for for a
command sent to a FC device, set the reported_gone bit.
In isp_async(), in the ISPASYNC_DEV_STAYED case, rescan the
device in question if it is mapped to a target ID and has
been reported gone.
In isp_make_here(), take a port database entry argument,
and clear the reported_gone bit when we send a rescan to
CAM.
In isp_make_gone(), take a port database entry as an
argument, and set the reported_gone bit when we send an
async event telling CAM consumers that the device is gone.
Sponsored by: Spectra Logic
MFC after: 1 week
- Remove two excessive and slow register reads from isp_intr(). Instead
of rereading value every time, assume that registers contain what we have
written there.
- Avoid sequential search through 4096 array elements when looking for
command tag. Use hash of lists to store active tags separately from free
ones and so greatly speedup the searches.
Reviewed by: mjacob
MISC CHANGES
Add a new async event- ISP_TARGET_NOTIFY_ACK, that will guarantee
eventual delivery of a NOTIFY ACK. This is tons better than just
ignoring the return from isp_notify_ack and hoping for the best.
Clean up the lower level lun enable code to be a bit more sensible.
Fix a botch in isp_endcmd which was messing up the sense data.
Fix notify ack for SRR to use a sensible error code in the case
of a reject.
Clean up and make clear what kind of firmware we've loaded and
what capabilities it has.
-----------
FULL (252 byte) SENSE DATA
In CTIOs for the ISP, there's only a limimted amount of space
to load SENSE DATA for associated CHECK CONDITIONS (24 or 26
bytes). This makes it difficult to send full SENSE DATA that can
be up to 252 bytes.
Implement MODE 2 responses which have us build the FCP Response
in system memory which the ISP will put onto the wire directly.
On the initiator side, the same problem occurs in that a command
status response only has a limited amount of space for SENSE DATA.
This data is supplemented by status continuation responses that
the ISP pushes onto the response queue after the status response.
We now pull them all together so that full sense data can be
returned to the periph driver.
This is supported on 23XX, 24XX and 25XX cards.
This is also preparation for doing >16 byte CDBs.
-----------
FC TAPE
Implement full FC-TAPE on both initiator and target mode side. This
capability is driven by firmware loaded, board type, board NVRAM
settings, or hint configuration options to enable or disable. This
is supported for 23XX, 24XX and 25XX cards.
On the initiator side, we pretty much just have to generate a command
reference number for each command we send out. This is FCP-4 compliant
in that we do this per ITL nexus to generate the allowed 1 thru 255
CRN.
In order to support the target side of FC-TAPE, we now pay attention
to more of the PRLI word 3 parameters which will tell us whether
an initiator wants confirmed responses. While we're at it, we'll
pay attention to the initiator view too and report it.
On sending back CTIOs, we will notice whether the initiator wants
confirmed responses and we'll set up flags to do so.
If a response or data frame is lost the initiator sends us an SRR
(Sequence Retransmit Request) ELS which shows up as an SRR notify
and all outstanding CTIOs are nuked with SRR Received status. The
SRR notify contains the offset that the initiator wants us to restart
the data transfer from or to retransmit the response frame.
If the ISP driver still has the CCB around for which the data segment
or response applies, it will retransmit.
However, we typically don't know about a lost data frame until we
send the FCP Response and the initiator totes up counters for data
moved and notices missing segments. In this case we've already
completed the data CCBs already and sent themn back up to the periph
driver. Because there's no really clean mechanism yet in CAM to
handle this, a hack has been put into place to complete the CTIO
CCB with the CAM_MESSAGE_RECV status which will have a MODIFY DATA
POINTER extended message in it. The internal ISP target groks this
and ctl(8) will be modified to deal with this as well.
At any rate, the data is retransmitted and an an FCP response is
sent. The whole point here is to successfully complete a command
so that you don't have to depend on ULP (SCSI) to have to recover,
which in the case of tape is not really possible (hence the name
FC-TAPE).
Sponsored by: Spectralogic
MFC after: 1 month
not by some hint setting. Do more preparations for FC-Tape.
Clean up resource counting for 24XX or later chipsets so
we find out after EXEC_FIRMWARE what is actually supported.
Set target mode exchange count based upon whether or not
we are supporting simultaneous target/initiator mode. Clean
up some old (pre-24XX) xfwoption and zfwoption issues.
Sponsored by: Spectralogic
MFC after: 3 days
and crosschecks against firmware documentation. We now check and report
FC firmware attributes and at least are now prepared for the upper 48 bits
of f/w attributes (which are probably for the 8100 or later cards). This
involed changing how inbits and outbits are calculated for varios commands,
hopefully clearer and cleaner. This also caused me to clean up the actual
mailbox register usage. Finally, we are now unconditionally using a CRN
for initiator mode.
A longstanding issue with the 2400/2500 is that they do *not* support
a "Prefer PTP followed by loop", which explains why enabling that
caused the f/w to crash.
A slightly more invasive change is to let the firmware load entirely
drive whether multi_id support is enabled or not.
Sponsored by: Spectralogic
MFC after: 1 week
Make the default role NONE if target mode is selected. This
allows ctl(8) to switch to/from target mode via knob settings.
If we default to role 'none', this causes a reset of the
24XX f/w which then causes initiators to wake up and notice
when we come online.
Reviewed by: kdm
MFC after: 2 weeks
Sponsored by: Spectralogic
We also revive loop down freezes. We also externaliz within isp
isp_prt_endcmd so something outside the core module can print
something about a command completing. Also some work in progress to
assist in handling timed out commands better.
Partially Sponsored by: Panasas
Approved by: re (kib)
MFC after: 1 month
- Allocate coherent DMA memory for the request/response queue area and
and the FC scratch area.
These changes allow isp(4) to work properly on sparc64 with usage of the
IOMMU streaming buffers enabled.
Approved by: mjacob
MFC after: 2 weeks
on debug output. Add a new platform function requirement to allow
for printing based upon the ITL nexus instead of the isp unit plus
channel, target and lun. This allows some printouts and error messages
from the core code to appear in the same format as the platform's
subsystem (in FreeBSD's case, CAM path).
MFC after: 1 week
numbers and handle types in rational way. This will better protect from
(unwittingly) dealing with stale handles/commands.
Fix the watchdog timeout code to better protect itself from mistakes.
If we run an abort on a putatively timed out command, the command
may in fact get completed, so check to make sure the command we're
timing it out is still around. If the abort succeeds, btw, the command
should get returned via a different path.
