single slab, but with alignment adjustment it won't. Again, when
there is only one item in a slab alignment can be ignored. See
previous revision of this file for more info.
PR: 227116
and zone has a large alignment. With alignment taken into
account uk_rsize will be greater than space in a slab. However,
since we have only one item per slab, it is always naturally
aligned.
Code that will panic before this change with 4k page:
z = uma_zcreate("test", 3984, NULL, NULL, NULL, NULL, 31, 0);
uma_zalloc(z, M_WAITOK);
A practical scenario to hit the panic is a machine with 56 CPUs
and 2 NUMA domains, which yields in zone size of 3984.
PR: 227116
MFC after: 2 weeks
per-cpu alloc and free of pages. The cache is filled with as few trips
to the phys allocator as possible by the use of a new
vm_phys_alloc_npages() function which allocates as many as N pages.
This code was originally by markj with the import function rewritten by
me.
Reviewed by: markj, kib
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14905
a cache of fully populated buckets. This will be used in a follow-on
commit.
The flag idea was originally from markj.
Reviewed by: markj, kib
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
This commit splits all of the logodefs/graphics out into their own own files
and provides a method for these files to register their logodefs with the
drawer. Graphics are now loaded on demand if they don't exist in the current
set of logodefs.
The drawer module becomes a little easier to navigate through without all of
the graphics mixed in. It's also easy to do one-off graphics like the
9.2 Die Hard tribute by dteske@ without adding even more to our memory
requirements.
- No need for a 'goto' when our entire loop body is then wrapped in a
conditional.
- No need to leave commented out prints laying around
- If an expression is clearly going to be either nil or an expression that
isn't likely to be a boolean, we might as well use `or` to specify a
default value for the expression. e.g. `loader.getenv(...) or "no"`
The previous iteration of this assumed that {module}_load was set. In the
old world order of default loader.conf(5), this was probably a safe
assumption given that we had almost every module explicitly not-loaded in
it.
In the new world order, this is no longer the case, so one could delete a
_load line inadvertently while leaving a _name, _type, _flags, _before,
_after, or _error. This would have caused a confusing Lua error and borked
module loading.
When I implemented my EFI support I failed to check if the upstream version
of makefs in NetBSD had done the same. Override my version with theirs to
make it easier to stay in sync with them in the future.
Reviewed by: imp, mav
Obtained from: NetBSD
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14913
This fixes a failure to resolve object file paths seen when buildkernel
(which sets MK_AUTO_OBJ=yes) and installkernel (which sets MK_AUTO_OBJ=no)
are run as separate steps. r329232 partially fixed this scenario by removing
MAKEOBJDIR, but it seems the AUTO_OBJ setting also needs to be on the same
page for the build and install steps.
Reviewed by: bdrewery
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14143
- The two types must be type-punnable for shared members of ifr_ifru.
This allows compatibility accessors to be shared.
- There must be no padding gap between ifr_name and ifr_ifru. This is
assumed in tcpdump's use of SIOCGIFFLAGS output which attempts to be
broadly portable. This is true for all current architectures, but very
large (256-bit) fat-pointers could violate this invariant.
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14910
We intend to remove support before FreeBSD 12 is branched.
Reviewed by: imp, emaste
MFC after: 3 days
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14890
The common pratice in ethernet device drivers is to fall back to
ether_ioctl() to implement generic ioctls not implemented by the driver
and to fail if no handler exists.
Convert these drivers to follow that practice rather than calling
ether_ioctl() for specific cases.
vxge(4) aready had the default case, but it was only called on failure
to match.
Reviewed by: imp
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14895
- Make sure Giant is locked when calling PCI device methods.
Newbus currently requires this.
- Avoid unlocking Giant right before aquiring the sleepqueue lock.
This can save a task switch.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Make sure the command completion handler is not called when the device is
in internal error state. This can easily trigger use after free situations.
MFC after: 3 days
Sponsored by: Mellanox Technologies
During health care IRQ resources will be reallocated.
Newbus requires that Giant is locked before accessing
these resources.
MFC after: 3 days
Sponsored by: Mellanox Technologies
Firmware dump collecting should be triggered in case firmware syndrome
with request for reset bit is set.
MFC after: 3 days
Submitted by: slavash@
Sponsored by: Mellanox Technologies
- Move the semaphore locking and unlocking to the same function.
- Flags are no longer needed if the reset and crdump will be done in the
same function.
MFC after: 3 days
Submitted by: slavash@
Sponsored by: Mellanox Technologies
- Move firmware dump prep and cleanup to init_one() and remove_one() so that
the init and cleanup will happen only upon driver reload.
- Add some prints to indicate firmware dump.
MFC after: 3 days
Submitted by: slavash@
Sponsored by: Mellanox Technologies
The old code checked for MLX5_CR_SPACE_DOMAIN which is irrelevant here.
However, if dev->vsec_addr would be 0, an access to wrong offset would
happen.
MFC after: 3 days
Submitted by: slavash@
Sponsored by: Mellanox Technologies
This allows for GCE consumers to easily detect the latest major
version of FreeBSD when using the gcloud command line utility.
To ensure snapshot builds do not conflict with release-style
builds (ALPHA, BETA, RC, RELEASE), the '-snap' suffix is appended
to the GCE image family name.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
This fixes 32-bit compat (no ioctl command defintions are required
as struct ifreq is the same size). This is believed to be sufficent to
fully support ifconfig on 32-bit systems.
Reviewed by: kib
Obtained from: CheriBSD
MFC after: 1 week
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14900
These objects are defined earlier in the same file; an extern declaration
after definition is redundant.
Broken in r331766 (introduction of ocs_fc(4)).
Sponsored by: Dell EMC Isilon
If the network interface or the uefi implementation do not support the
ReceiveFilter interface do not return only and just print a message.
U-Boot doesn't support is and likely never will. Also even if this fails
it doesn't mean that network in EFI isn't supported.
The ocs_fc(4) driver supports the following hardware:
Emulex 16/8G FC GEN 5 HBAS
LPe15004 FC Host Bus Adapters
LPe160XX FC Host Bus Adapters
Emulex 32/16G FC GEN 6 HBAS
LPe3100X FC Host Bus Adapters
LPe3200X FC Host Bus Adapters
The driver supports target and initiator mode, and also supports FC-Tape.
Note that the driver only currently works on little endian platforms. It
is only included in the module build for amd64 and i386, and in GENERIC
on amd64 only.
Submitted by: Ram Kishore Vegesna <ram.vegesna@broadcom.com>
Reviewed by: mav
MFC after: 5 days
Relnotes: yes
Sponsored by: Broadcom
Differential Revision: https://reviews.freebsd.org/D11423
There are out of tree consumers of vm_map_min() and vm_map_max(), and
I believe there are consumers of vm_map_pmap(), although the later is
arguably less in the need of KBI-stable interface. For the consumers
benefit, make modules using this KPI not depended on the struct vm_map
layout.
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D14902
r222319 in newfs raised the default blocksize for UFS/FFS filesystems
from 16K to 32K and the default fragment size from 2K to 4K, with a
rationale that most disks were now running with 4K sectors.
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
libdl is a filter on libc, and pretty lightweight. Add it to the 'clibs'
package with libc, effectively tying them together in a pkgbase world.
Reviewed by: gjb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D13997
