- Drop uses of 'will'.
- Replace 'to use' with active voice.
- Tidy language around interrupt types and clarify that INTx doesn't
work on VFs.
- Drop leading articles from sysctl/tunable descriptions.
- Tweak the wording of several sysctl/tunable descriptions.
Submitted by: wblock (1, 2, 4)
Sponsored by: Chelsio Communications
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D8812
FC-Tape provides additional link level error recovery, and is
highly recommended for tape devices. It will only be turned on for
a given target if the target supports it.
Without this setting, we default to whatever FC-Tape setting is in
NVRAM on the card.
This can be overridden by setting the following loader tunable, for
example for isp0:
hint.isp.0.nofctape=1
sys/conf/options:
Add a new kernel config option, ISP_FCTAPE_OFF, that
defaults the FC-Tape configuration to off.
sys/dev/isp/isp_pci.c:
If ISP_FCTAPE_OFF is defined, turn off FC-Tape. Otherwise,
turn it on if the card supports it.
share/man/man4/isp.4:
Add a description of FC-Tape to the isp(4) man page.
Add descriptions of the fctape and nofctape options, as well as the
ISP_FCTAPE_OFF kernel configuration option.
Add the ispfw module and kernel drivers to the suggested
configurations at the top of the man page so that users are less
likely to leave it out. The driver works well with the included
firmware, but may not work at all with whatever firmware the user
has flashed on their card.
MFC after: 3 days
Sponsored by: Spectra Logic
When WITH_REPRODUCIBLE_BUILD=yes is set in src.conf(5), eliminate the
time, user, and host from the loader's version information. This allows
builds to produce bit-for-bit identical output.
Reviewed by: bapt
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8842
I'm currently working on writing a metrics exporter for the Prometheus
monitoring system to provide access to sysctl metrics. Prometheus and
sysctl have some structural differences:
- sysctl is a tree of string component names.
- Prometheus uses a flat namespace for its metrics, but allows you to
attach labels with values to them, so that you can do aggregation.
An initial version of my exporter simply translated
hw.acpi.thermal.tz1.temperature
to
sysctl_hw_acpi_thermal_tz1_temperature_celcius
while we should ideally have
sysctl_hw_acpi_thermal_temperature_celcius{thermal_zone="tz1"}
allowing you to graph all thermal zones on a system in one go.
The change presented in this commit adds support for accomplishing this,
by providing the ability to attach labels to nodes. In the example I
gave above, the label "thermal_zone" would be attached to "tz1". As this
is a feature that will only be used very rarely, I decided to not change
the KPI too aggressively.
Discussed on: hackers@
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D8775
Changes include modifications in kernel crash dump routines, dumpon(8) and
savecore(8). A new tool called decryptcore(8) was added.
A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump
configuration in the diocskerneldump_arg structure to the kernel.
The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for
backward ABI compatibility.
dumpon(8) generates an one-time random symmetric key and encrypts it using
an RSA public key in capability mode. Currently only AES-256-CBC is supported
but EKCD was designed to implement support for other algorithms in the future.
The public key is chosen using the -k flag. The dumpon rc(8) script can do this
automatically during startup using the dumppubkey rc.conf(5) variable. Once the
keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O
control.
When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random
IV and sets up the key schedule for the specified algorithm. Each time the
kernel tries to write a crash dump to the dump device, the IV is replaced by
a SHA-256 hash of the previous value. This is intended to make a possible
differential cryptanalysis harder since it is possible to write multiple crash
dumps without reboot by repeating the following commands:
# sysctl debug.kdb.enter=1
db> call doadump(0)
db> continue
# savecore
A kernel dump key consists of an algorithm identifier, an IV and an encrypted
symmetric key. The kernel dump key size is included in a kernel dump header.
The size is an unsigned 32-bit integer and it is aligned to a block size.
The header structure has 512 bytes to match the block size so it was required to
make a panic string 4 bytes shorter to add a new field to the header structure.
If the kernel dump key size in the header is nonzero it is assumed that the
kernel dump key is placed after the first header on the dump device and the core
dump is encrypted.
Separate functions were implemented to write the kernel dump header and the
kernel dump key as they need to be unencrypted. The dump_write function encrypts
data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps
are not supported due to the way they are constructed which makes it impossible
to use the CBC mode for encryption. It should be also noted that textdumps don't
contain sensitive data by design as a user decides what information should be
dumped.
savecore(8) writes the kernel dump key to a key.# file if its size in the header
is nonzero. # is the number of the current core dump.
decryptcore(8) decrypts the core dump using a private RSA key and the kernel
dump key. This is performed by a child process in capability mode.
If the decryption was not successful the parent process removes a partially
decrypted core dump.
Description on how to encrypt crash dumps was added to the decryptcore(8),
dumpon(8), rc.conf(5) and savecore(8) manual pages.
EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU.
The feature still has to be tested on arm and arm64 as it wasn't possible to run
FreeBSD due to the problems with QEMU emulation and lack of hardware.
Designed by: def, pjd
Reviewed by: cem, oshogbo, pjd
Partial review: delphij, emaste, jhb, kib
Approved by: pjd (mentor)
Differential Revision: https://reviews.freebsd.org/D4712
This is reworking the change in r296585 but to still properly install
the files. This limits the change to only the DIRDEPS_BUILD logic
for what it considers the name of the staging set, which is what the
cookie name is based off of.
Sponsored by: Dell EMC Isilon
MFC after: 1 week
Instead of failing with ENAMETOOLONG, which is swallowed by
pthread_set_name_np() anyway, truncate the given name to MAXCOMLEN+1
bytes. This is more likely what the user wants, and saves the
caller from truncating it before the call (which was the only
recourse).
Polish pthread_set_name_np(3) and add a .Xr to thr_set_name(2)
so the user might find the documentation for this behavior.
Reviewed by: jilles
MFC after: 3 days
Sponsored by: Dell EMC
- It should say 'read' in the I2CREAD section.
- last in the struct indicates the last command in a sequence, not the
reverse.
Reviewed by: imp
MFC after: 3 days
to create a repo during 'make packages'
This would have been useful for a situation I found myself in where
pkg(8) had been upgraded to a version that wanted the FBSD_1.5 ABI
version but libc.so.7 had not been upgraded, and only provided
FBSD_1.4. I found I needed to update libc in order to run pkg, and I
also needed to use pkg to update libc... Which is why pkg-static
exists, but there's currently no way to tell the build system to use
pkg-static instead of pkg.
This creates a variable PKG_CMD, default value 'pkg', that can be
overridden from the command line.
Reviewed by: gjb
Approved by: gjb
Differential Revision: https://reviews.freebsd.org/D8120
If set it installs LLD as /usr/bin/ld. LLD (as of version 3.9) is not
capable of linking the world and kernel, but can self-host and link many
substantial applications. GNU ld continues to be used for the world and
kernel build, regardless of how this knob is set.
It is on by default for arm64, and off for all other CPU architectures.
Sponsored by: The FreeBSD Foundation
~/nsmb.conf, as erroneously introduced by r214387, is never used. Fix the man
page to specify that ~/.nsmbrc is used instead.
PR: 210652
Submitted by: ganael.laplanche@corp.ovh.com
Approved by: gjb (doceng@)
We shouldn't install them on the architectures not supported by Hyper-V.
And, hv_ata_pci_disengage.4.gz should be removed from all architectures:
1) It should have only applied to Hyper-V;
2) For Hyper-V platforms (amd64 and i386), the related driver was removed by
r306426 | sephe | 2016-09-29 09:41:52 +0800 (Thu, 29 Sep 2016),
because now we have a better mechanism to disble the ata driver for hard
disks when the VM runs on Hyper-V.
Reviewed by: sephe, andrew, jhb
Approved by: sephe (mentor)
MFC after: 3 days
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8572
on the AES-NI code, and modified as needed for use on ARMv8. When loaded
the driver will check the appropriate field in the id_aa64isar0_el1
register to see if AES is supported, and if so the probe function will
signal the driver should attach.
With this I have seen up to 2000Mb/s from the cryptotest test with a single
thread on a ThunderX Pass 2.0.
Reviewed by: imp
Obtained from: ABT Systems Ltd
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8297
We need to remove the line since we removed the related manual just now.
Reviewed by: sephe
Approved by: sephe (mentor)
MFC after: 1 week
Sponsored by: Microsoft
A few months ago, we removed the driver, which was not necessary any longer.
Reviewed by: sephe
Approved by: sephe (mentor)
MFC after: 1 week
Sponsored by: Microsoft
We enhanced the vmbus driver to support PCIe pass-through recently.
Reviewed by: sephe
Approved by: sephe (mentor)
MFC after: 1 week
Sponsored by: Microsoft
Hardfloat is now default (use riscv64sf as TARGET_ARCH
for softfloat).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8529
The tree can be build with an external toolchain that will not
necessarily default to desired settings, so we have to specify
the required flags explicitly to force the required compilation
mode.
Reviewed by: adrian, br
Sponsored by: https://reviews.freebsd.org/D8505
VSS stands for "Volume Shadow Copy Service". Unlike virtual machine
snapshot, it only takes snapshot for the virtual disks, so both
filesystem and applications have to aware of it, and cooperate the
whole VSS process.
This driver exposes two device files to the userland:
/dev/hv_fsvss_dev
Normally userland programs should _not_ mess with this device file.
It is currently used by the hv_vss_daemon(8), which freezes and
thaws the filesystem. NOTE: currently only UFS is supported, if
the system mounts _any_ other filesystems, the hv_vss_daemon(8)
will veto the VSS process.
If hv_vss_daemon(8) was disabled, then this device file must be
opened, and proper ioctls must be issued to keep the VSS working.
/dev/hv_appvss_dev
Userland application can opened this device file to receive the
VSS freeze notification, hold the VSS for a while (mainly to flush
application data to filesystem), release the VSS process, and
receive the VSS thaw notification i.e. applications can run again.
The VSS will still work, even if this device file is not opened.
However, only filesystem consistency is promised, if this device
file is not opened or is not operated properly.
hv_vss_daemon(8) is started by devd(8) by default. It can be disabled
by editting /etc/devd/hyperv.conf.
Submitted by: Hongjiang Zhang <honzhan microsoft com>
Reviewed by: kib, mckusick
MFC after: 3 weeks
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8224
This allows 'make foo install' or 'make all install'. It is a similar
fix as r304697 did for reading dependency files.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
_SKIP_BUILD will be set when nothing is expected to be built. This can
be used to optimize some tree-walks and operations which don't need to
load dependency files or generate dependencies via beforebuild-style
hacks.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
This was a mistake in r295641, but is effectively prevented from
being a problem due to r296699 preventing 'make all' from being
usable at MAKELEVEL 0 for DIRDEPS_BUILD.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
- Increase Rx buffer size from MCLBYTES to MJUMPAGESIZE.
- Provide an additional defragmentation routine for frames larger
than MCLBYTES; that is required by A-MSDU / Atheros Fast-Frames
support to work with current Tx path implementation.
Enabled features list for RTL8188CE:
- Atheros Fast-Frames;
- A-MPDU (Tx / Rx);
- A-MSDU (Tx / Rx; 4k only);
- Short Guard Interval.
Tested with:
- RTL8188CE (STA+AP) + RTL8821AU (STA).
- RTL8188CE (STA) + RTL8188CUS (AP).
Relnotes: yes
After removal of SMB_TRANS some information in the description of
SMB_BWRITE has become stale. E.g., the maximum block size has been
restored to 32.
Also, the descriptions of SMB_BREAD and SMB_BWRITE had some
incorrect information on the SMBus protocol details.
MFC after: 1 week
X-MFC with: r308242
Differential Revision: https://reviews.freebsd.org/D8431
This change reverts most of r281985.
The method did not map to anything defined by SMBus protocol and could
not be implemented for SMBus controllers.
This change is obviously not backwards compatible, but I have good
reasons to believe that there have never been any users of SMB_TRANS.
Discussed with: grembo, jhb
MFC after: 6 weeks
Running `make libfoo.ll` or `make libfoo.bc` within a library directory
will now give us an LLVM IR version of the library, and `make foo.full.ll`
or `make foo.full.bc` will give us an IR version of a binary.
As part of this change, we add an LLVM_LINK variable to sys.mk that can be
specified/overridden using an external toolchain.
Reviewed by: bdrewery, brooks
Approved by: rwatson (mentor)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8388
Summary:
The hardware does not expose a classic SMBus interface.
Instead it has a lower level interface that can express a far richer
I2C protocol than what smbus offers. However, the interface does not
provide a way to explicitly generate the I2C stop and start conditions.
It's only possible to request that the stop condition is generated
after transferring the next byte in either direction. So, at least
one data byte must always be transferred.
Thus, some I2C sequences are impossible to generate, e.g., an equivalent
of smbus quick command (<start>-<slave addr>-<r/w bit>-<stop>).
At the same time isl(4) and cyapa(4) are moved to iicbus and now they use
iicbus_transfer for communication. Previously they used smbus_trans()
interface that is not defined by the SMBus protocol and was implemented
only by ig4(4). In fact, that interface was impossible to implement
for the typical SMBus controllers like intpm(4) or ichsmb(4) where
a type of the SMBus command must be programmed.
The plan is to remove smbus_trans() and all its uses.
As an aside, the smbus_trans() method deviates from the standard,
but perhaps backwards, FreeBSD convention of using 8-bit slave
addresses (shifted by 1 bit to the left). The method expects
7-bit addresses.
There is a user facing consequence of this change.
A user must now provide device hints for isl and cyapa that specify an iicbus to use
and a slave address on it.
On Chromebook hardware where isl and cyapa devices are commonly found
it is also possible to use a new chromebook_platform(4) driver that
automatically configures isl and cyapa devices. There is no need to
provide the device hints in that case,
Right now smbus(4) driver tries to discover all slaves on the bus.
That is very dangerous. Fortunately, the probing code uses smbus_trans()
to do its job, so it is really enabled for ig4 only.
The plan is to remove that auto-probing code and smbus_trans().
Tested by: grembo, Matthias Apitz <guru@unixarea.de> (w/o
chromebook_platform)
Discussed with: grembo, imp
Reviewed by: wblock (docs)
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D8172
In r307676, several make rules were added for LLVM IR files, both in
text and binary format. Unfortunately these use different suffixes from
what upstream uses:
* Text IR has upstream suffix ".ll", while r307676 uses ".llo"
* Binary IR has upstream suffix ".bc", while r307676 uses ".bco"
Change these to what upstream uses instead.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D8326
The driver currently supports chips that are fully compliant with the
JEDEC SPD / EEPROM / TS standard (JEDEC Standard 21-C,
TSE2002 Specification, frequenlty referred to as JEDEC JC 42.4).
Additionally some chips from STMicroelectronics are supported as well.
They are compliant except for their Device ID pattern.
Given the continued lack of any common sensor infrastructure, the driver
uses an ad-hoc sysctl to report the temperature.
Reviewed by: wblock (documentation)
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D8174
Summary:
The Freescale e500v2 PowerPC core does not use a standard FPU.
Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor
unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the
stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this.
Additionaly, the SPE opcodes overlap with Altivec, so these are mutually
exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was
created with the same function set as in powerpc/powerpc/altivec.c, so it
becomes effectively a drop-in replacement. setjmp/longjmp were modified to save
the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by
the SPE).
Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not
support double-precision floating point.
Also, without a new MACHINE_ARCH it would be impossible to provide binary
packages which utilize the SPE.
Additionally, no work has been done to support ports, work is needed for this.
This also means no newer gcc can yet be used. However, gcc's powerpc support
has been refactored which would make adding a powerpcspe-freebsd target very
easy.
Test Plan:
This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222
(P1022-based) board, compiled against the new ABI. Base system utilities
(/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot
multiuser.
Reviewed By: bdrewery, imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D5683
after r307676, which added transformation rules for .llo and .bco files.
These suffixes also have to be added the the global .SUFFIXES target,
otherwise the various suffix-transformation rules would be interpreted
as literal targets. E.g.,
.c.bco:
... commands ...
would actually to build a file named ".c.bco".
These two ALU instructions first appeared on Linux. Then, libpcap adopted
and made them available since 1.6.2. Now more platforms including NetBSD
have them in kernel. So do we.
--이 줄 이하는 자동으로 제거됩니다--
As a foundation for future work with LLVM's Intermediate Representation (IR),
add new suffix rules that can be used to build .llo (text) or .bco (bitcode)
files from C or C++ sources. This compilation step uses the same CFLAGS, etc.,
as are used for building .o files, with the exception of optimization flags.
Many of the things we would like to do with IR (e.g., instrumentation) work
better with unoptimized code, so our approach is to build .c->.bco without
optimization and then apply the optimization in post-analysis,
post-instrumentation linking.
The overall result of these changes is:
* one can "make foo.llo" or "make foo.bco" wherever "make foo.o" was supported
* new make variables IR_CFLAGS and IR_CXXFLAGS are available to inspect the
flags that are used by Clang to generate the IR
These new rules are added unconditionally to our non-POSIX suffix rule set,
since we cannot inspect COMPILER_TYPE in sys.mk. Future changes that depend
on these rules (e.g., building IR versions of binaries from bsd.prog.mk)
should use COMPILER_TYPE to determine when we can expect IR rules to succeed.
Reviewed by: emaste, imp
Approved by: rwatson (mentor)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D4339
This is added to facilitate experiments building FreeBSD without
copyleft software.
If WITHOUT_GNU_DIFF is set no /usr/bin/diff or /usr/bin/diff3 will
be built.
If WITHOUT_GNU_GREP is set then BSD grep will be installed as
/usr/bin/bsdgrep or /usr/bin/grep, depending on the WITH_BSD_GREP
knob.
Reviewed by: brooks (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: Differential Revision: https://reviews.freebsd.org/D8288
VFP code to store the old context, with lazy loading of the new context
when needed.
FPU_KERN_NOCTX is missing as this is unused in the crypto code this has
been tested with, and I am unsure on the requirements of the UEFI
Runtime Services.
Reviewed by: kib
Obtained from: ABT Systeems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8276
This is currently encoded in conditional blocks in gnu/lib/Makefile and
gnu/usr.bin/Makefile. Set it via src.opts.mk to make GDB's dependency
on binutils more clear.
All devices:
- add support for rate adaptation via ieee80211_amrr(9);
- use short preamble for transmitted frames when needed;
- multi-bss support:
* for RTL8821AU: 2 VAPs at the same time;
* other: 1 any VAP + 1 sta VAP.
RTL8188CE:
- fix IQ calibration bug (reason of significant speed degradation);
- add h/w crypto acceleration support.
USB:
- A-MPDU Tx support;
- short GI support;
Other:
- add support for RTL8812AU / RTL8821AU chipsets
(a/b/g/n only; no ac yet);
- split merged code into subparts:
* bus glue (usb/*, pci/*, rtl*/usb/*, rtl*/pci/*)
* common (if_rtwn*)
* chip-specific (rtl*/*)
- various other bugfixes.
Due to code reorganization, module names / requirements were changed too:
urtwn urtwnfw -> rtwn rtwn_usb rtwnfw
rtwn rtwnfw -> rtwn rtwn_pci rtwnfw
Tested with RTL8188CE, RTL8188CUS, RTL8188EU and RTL8821AU.
Tested by: kevlo, garga,
Peter Garshtja <peter.garshtja@ambient-md.com>,
Kevin McAleavey <kevin.mcaleavey@knosproject.com>,
Ilias-Dimitrios Vrachnis <id@vrachnis.com>,
<otacilio.neto@bsd.com.br>
Relnotes: yes
This commit, long overdue, contains contributions in the last 2 years
from Stefano Garzarella, Giuseppe Lettieri, Vincenzo Maffione, including:
+ fixes on monitor ports
+ the 'ptnet' virtual device driver, and ptnetmap backend, for
high speed virtual passthrough on VMs (bhyve fixes in an upcoming commit)
+ improved emulated netmap mode
+ more robust error handling
+ removal of stale code
+ various fixes to code and documentation (some mixup between RX and TX
parameters, and private and public variables)
We also include an additional tool, nmreplay, which is functionally
equivalent to tcpreplay but operating on netmap ports.
