Commit Graph

3199 Commits

Author SHA1 Message Date
Colin Percival
889592b876 Change gptldr from relocating 0xfff1 bytes of boot2 to relocating 0x20000
bytes of boot2.  Since we're in 16-bit mode, we can't copy all 128kB at
once; instead we loop four times and copy 32 kB each time.

This change was made necessary by an upcoming increase in the size of the
boot2 binary; should it increase further, the COPY_BLKS value can be
adjusted without anyone needing to remember 8086 assembly language again.

Requested by:	allanjude
Tested by:	allanjude
MFC after:	1 week
2015-10-08 15:38:34 +00:00
John Baldwin
3e10dd1049 Use EFI page size constants instead of hardcoding 4096.
Reviewed by:	emaste
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D3692
2015-09-29 15:49:53 +00:00
Luiz Otavio O Souza
2dde378283 Set the #address-cells and #size-cells for the I2C controllers in RPi2.
This allows the use of I2C addresses in 'reg' property.
2015-09-27 18:21:22 +00:00
Bryan Drewery
ec766071e3 META_MODE: Remove DEP_MACHINE from Makefile.depend files.
This has not been needed since r246865 in projects/bmake.

Sponsored by:	EMC / Isilon Storage Division
2015-09-25 19:44:01 +00:00
Bryan Drewery
54c7d75a06 META_MODE: Remove DEP_RELDIR from Makefile.depend files.
This has not been needed since r284171 in projects/bmake.

Sponsored by:	EMC / Isilon Storage Division
2015-09-25 19:26:08 +00:00
Luiz Otavio O Souza
61ebeff43c Enable if_dwc for Allwinner A20 based boards.
This enables the gigabit ethernet on cubieboard2 and banana pi.

A special thanks to Netgate who gently provided me with a banana pi almost
a year ago.
2015-09-21 03:17:41 +00:00
John Baldwin
b2e38974e2 The EFI boot loader allocates a single chunk of contiguous memory to
hold the kernel, modules, and any other loaded data.  This memory block
is relocated to the kernel's expected location during the transfer of
control from the loader to the kernel.

The GENERIC kernel on amd64 has recently grown such that a kernel + zfs.ko
no longer fits in the default staging size.  Bump the default size from
32MB to 48MB to provide more breathing room.

PR:		201679
Reviewed by:	imp
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D3666
2015-09-17 20:36:46 +00:00
John Baldwin
5dc89bd2a0 Various small cleanups to EFI loader Makefiles.
Reviewed by:	emaste
Differential Revision:	https://reviews.freebsd.org/D3641
2015-09-17 18:32:51 +00:00
Hans Petter Selasky
6e17d3a7fc Add missing file to build. 2015-09-14 07:11:53 +00:00
Marcel Moolenaar
40ea8e710e As expected, things aren't as simple as hoped. Consequently, we have
no option but to use the smbios information to fill in the blanks.
It's a good thing UGA is a protocol of the past and GOP has all the
info we need.

Anyway, the logic has been tweaked a little to get the easier bits
of information up front. This includes the resolution and the frame
buffer address. Then we look at the smbios information and define
expected values as well as the missing bits (frame buffer offset and
stride). If the values obtained match the expect values, we fill in
the blanks and return. Otherwise we use the existing detection logic
to figure it out.

Rename the environment variables from uga_framebuffer abd uga_stride
to hw.efifb.address and hw.efifb.stride. The latter names are more
in line with other variable names.

We currently have hardcoded settings for:
1.  Mid-2007 iMac (iMac7,1)
2.  Late-2007 MacBook (MacBook3,1)
2015-09-07 17:56:49 +00:00
Marcel Moolenaar
1f8577e633 Auto-detect the UGA frame buffer and stride on a MacBook. We're
striking a delicate balance between exhaustive searching and
banking on assumptions. The environment variables can be used
as a fall-back anyway. With this change, all known and tested
Macs with only UGA should have a working console out of the
box... for now...
2015-09-05 18:24:51 +00:00
Marcel Moolenaar
39993974aa My MacBook has UGA only, but we fail to detect any changes
in the frame buffer when we flip pixels. Allow the detection
to be bypassed by setting the uga_framebuffer and uga_stride
variables. The kernel console works fine even when we can't
detect pixel changes in the frame buffer, which indicates
that the problem could be with reading from the frame buffer
and not writing to it.
2015-09-05 03:27:23 +00:00
Marcel Moolenaar
504ca52575 For UGA, the frame buffer address obtained by scanning the
PCI BARs does not necessarily correspond to the upper-left
most pixel. Scan the frame buffer for which byte changed
when changing the pixel at (0,0).

Use the same technique to determine the stride. Except for
changing the pixel at (0,0), we change the pixel at (0,1).

PR:		202730
Tested by:	hartzell (at) alerce.com
2015-09-03 04:35:17 +00:00
Oleksandr Tymoshenko
1aca4f8fb4 Enable both i2c1 and i2c2. These devices are disabled in TI's DTS
so they were disabled during DTS transition. Though there are
no standard devices/drivers on them people might use iic(4) userland
interface to access these buses.
2015-09-03 02:28:18 +00:00
Andrew Turner
2c63960222 Install the forth bits on arm64. For now limit it to just arm64 as on x86
these should have been installed as part of the regular loader.
2015-09-01 13:51:07 +00:00
Marcel Moolenaar
7aefa262d6 Add support for the UGA draw protocol. This includes adding a
command called 'uga' to show whether UGA is implemented by the
firmware and what the settings are. It also includes filling
the efi_fb structure from the UGA information when GOP isn't
implemented by the firmware.

Since UGA does not provide information about the stride, we
set the stride to the horizontal resolution. This is likely
not correct and we should determine the stride by trial and
error. For now, this should show something on the console
rather than nothing.

Refactor this file to maximize code reuse.

PR:		202730
2015-08-30 23:58:53 +00:00
Luiz Otavio O Souza
765701d193 Add the LED definitions from vendor's DTS.
Add gpioled support to A20 kernel.

While here rename the gpio phandle to match the one used in the vendor's
DTS.
2015-08-30 23:20:00 +00:00
Luiz Otavio O Souza
a7fc139721 Reduce the difference to vendor DTS by using the vendor compat strings (at
some point we have to use the complete vendor DTS files, but we're not
there yet).
2015-08-30 16:10:12 +00:00
Marcel Moolenaar
d81907ecbf Add a gop command to help diagnose VT efifb problems. The gop
command has the following sub-commands:
  list		- list all possible modes (paged)
  get		- return the current mode
  set <mode>	- set the current mode to <mode>
2015-08-30 01:39:59 +00:00
Warner Losh
93d5e88d46 Add back missing -m32 for amd64 and powerpc64 that was lost
in the move to bsd.stand.mk.
2015-08-28 14:50:36 +00:00
Warner Losh
9d2edd63d4 Use CFLAGS_NO_SIMD in preference to varying lists of -mno-xxxx flags.
Go ahead and defined -D_STANDALONE for all targets (only strictly
needed for some architecture, but harmless on those it isn't required
for). Also add -msoft-float to all architectures uniformly rather
that higgley piggley like it is today.

Differential Revision: https://reviews.freebsd.org/D3496
2015-08-27 23:46:42 +00:00
Warner Losh
e30880fb35 The flags -mno-aes -mno-avx only exist for clang, not gcc, so
add them only to the clang CFLAGS.
2015-08-20 18:31:05 +00:00
Oleksandr Tymoshenko
34a1f44995 Make dtb file configurable via loader(8) variable. ubldr already checks
"fdt_file" and "fdtfile" U-Boot variables. Add one more check for
"fdt_file" loader(8) variable.

loader(8) variable takes precedence over u-boot env one
2015-08-15 21:47:07 +00:00
Hans Petter Selasky
43ea03d756 Improve the realtime properties of USB transfers for embedded systems
like RPI-B and RPI-2.

Description of problem:
USB transfers can process data in their callbacks sometimes causing
unacceptable latency for other USB transfers. Separate BULK completion
callbacks from CONTROL, INTERRUPT and ISOCHRONOUS callbacks, and give
BULK completion callbacks lesser execution priority than the
others. This way USB audio won't be interfered by heavy USB ethernet
usage for example.

Further serve USB transfer completion in a round robin fashion,
instead of only serving the most CPU hungry. This has been done by
adding a third flag to USB transfer queue structure which keeps track
of looping callbacks. The "command" callback function then decides
what to do when looping.

MFC after:		2 weeks
2015-08-14 12:57:53 +00:00
Allan Jude
9322ac3f6e Remove guards around overwriting loader.rc and menu.rc
There have been .local version of each for user modifications for some time
This allows users to receive future updates to these files

PR:		183765
Submitted by:	Bertram Scharpf, Nikolai Lifanov (patch)
Reviewed by:	dteske, loos, eadler
Approved by:	bapt (mentor)
MFC after:	1 month
Relnotes:	yes
Sponsored by:	ScaleEngine Inc.
Differential Revision:	https://reviews.freebsd.org/D3176
2015-08-06 16:07:27 +00:00
Edward Tomasz Napierala
8d9ed17366 Fix a problem which made loader(8) load non-kld files twice.
For example, without this patch, the following three lines
in /boot/loader.conf would result in /boot/root.img being preloaded
twice, and two md(4) devices - md0 and md1 - being created.

initmd_load="YES"
initmd_type="md_image"
initmd_name="/boot/root.img"

Reviewed by:	marcel@
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D3204
2015-08-03 16:27:36 +00:00
Ed Schouten
42642ecd97 Document the existence of cloudabi_load and cloudabi64_load. 2015-07-31 08:45:35 +00:00
Edward Tomasz Napierala
46a8ca51e3 Use consistent spacing.
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-07-25 20:17:19 +00:00
Edward Tomasz Napierala
caf9bbecdc Add md_root example to defaults/loader.conf.
Note that this doesn't quite work yet - the preloaded image
gets loaded twice for some reason.

MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-07-25 20:15:29 +00:00
Edward Tomasz Napierala
371583f6ca Use double newlines consistently.
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2015-07-25 16:20:04 +00:00
Edward Tomasz Napierala
933333caf8 Document md_root in loader(8). The md(4) manual page mentions it,
but it's hard to find and easy to miss.

Reviewed by:	wblock@
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D3183
2015-07-25 13:02:41 +00:00
John-Mark Gurney
02bee582d0 move the prototype to the lib.h header.. This makes more sense, and
it's an API between boot2.c and arm_init.S which calls it..
2015-07-18 22:47:46 +00:00
John-Mark Gurney
c09626461f other fixes to make boot2 compile for IXP... Properly end the asm
sections, and for some reason, main needs a prototype... If someone
has a better fix, I'm all ears...

Pointed out by:	Berislav Purgar
2015-07-18 20:21:25 +00:00
John-Mark Gurney
8d0440e04b revert r278579, this is in a different compile environment than the
kernel, and needs to be named cpu_id...

Pointed out by:	Berislav Purgar
2015-07-18 20:19:51 +00:00
Luiz Otavio O Souza
f935da6fee Add the Banana Pi DTS.
The Banana Pi support is in progress and this is intended to help the early
adopters.
2015-07-07 19:01:54 +00:00
Ed Maste
906451276a Avoid creating invalid UEFI device path
The UEFI loader on the 10.1 release install disk (disc1) modifies an
existing EFI_DEVICE_PATH_PROTOCOL instance in an apparent attempt to
truncate the device path.  In doing so it creates an invalid device
path.

Perform the equivalent action without modification of structures
allocated by firmware.

PR:		197641
MFC After:	1 week
Submitted by:	Chris Ruffin <chris.ruffin@intel.com>
2015-07-07 18:44:27 +00:00
Luiz Otavio O Souza
f4b61a34e5 Add the GMAC entries to sun7i (A20) DTS.
While here make EMAC disabled unless explicitly enabled.
2015-07-07 18:32:23 +00:00
Luiz Otavio O Souza
06844c0f7e Install loader.rc with ARM u-boot loader (ubldr).
loader.rc is the responsible to read and process loader.conf variables.

This fix the issue of loader.conf being silently ignored.

MFC after:	3 days
2015-07-04 16:19:38 +00:00
Ruslan Bukin
4ebd95ae06 o Add a description for virtio block device implemented
in PISM (Bluespec C-interface device)
o Add a kernel config

Sponsored by:	HEIF5
2015-07-03 14:46:57 +00:00
Luiz Otavio O Souza
7ec8c789c3 Add AHCI attachment code for Allwinner A10/A20 SoCs.
The Allwinner SoC has an AHCI device on its internal main bus rather
than the PCI bus.  This SoC is somewhat underdocumented, and its SATA
controller is no exception.  The methods to support this chip were
harvested from the Linux Allwinner SDK, and then constants invented to
describe what's going on based on low-level constants contained in the
SATA standard and guess work.

This SoC requires a specific AHCI channel setup in order to start the
operations on the channel properly.

Clock setup and AHCI channel setup idea came from NetBSD.

Tested on Cubieboard 2 and Banana pi (and attachment on Cubieboard by
Pratik Singhal).

Differential Revision:	https://reviews.freebsd.org/D737
Submitted by:	imp
Reviewed by:	imp, ganbold, mav, andrew
2015-07-03 14:11:01 +00:00
Mark Murray
c4f9c760c9 Updated random(4) boot/shutdown scripting.
Fix the man pages as well.

Differential Revision: https://reviews.freebsd.org/D2924
Approved by: so (delphij)
2015-06-30 17:09:41 +00:00
Yoshihiro Takahashi
7d0de310ff MFi386: r284878
Reduce warnings:

   - Add prototype for boot2 main()
   - Don't make assignment within if statement, split it into two.
2015-06-27 08:49:41 +00:00
Xin LI
4b1222a215 Reduce warnings:
- Add prototype for boot2 main()
 - Don't make assignment within if statement, split it into two.

No functional or binary change -- verified with sha256(1).

MFC after:	2 weeks
2015-06-26 18:03:19 +00:00
Antoine Brodin
d2a1c16b1a Install version.4th.8 again
It was disconnected from installation in r281081, but was never removed
from the tree or added to ObsoleteFiles.inc
2015-06-21 06:56:29 +00:00
Maxim Sobolev
15e862e33c Provide bug4bug workaround for certain dumbiness of the u-boot's API_env_enum
function, which is expected to set returned env to NULL upon reaching the end
of the environment list but fails to do so in certain cases. The respective
u-boot code looks like the following (HEAD at the time of this commit):

--- api.c ---
 496 static int API_env_enum(va_list ap)
 ...
 510                 *next = last;
 511
 512                 for (i = 0; env_get_char(i) != '\0'; i = n + 1) {
 513                         for (n = i; env_get_char(n) != '\0'; ++n) {
 514                                 if (n >= CONFIG_ENV_SIZE) {
 515                                         /* XXX shouldn't we set *next = NULL?? */
 516                                         return 0;
 517                                 }
 518                         }
-------------

The net result is that any unfortunate user of the loader's ub_env_enum()
function hitting this condition would be trapped in the infinite loop, as
the main use pattern of ub_env_enum() is basically the following:

while ((env = ub_env_enum(env)) != NULL) { DO STUFF }

Which would stuck forever with the last element.
2015-06-19 22:24:58 +00:00
Maxim Sobolev
8f207db125 Fix bug in the ubldr introduced in the rev.283035. The new code
fails to properly consider memory regions when the loader is
located below of those regions or engulfs their lower limit. This
results in "not enough RAM to load kernel" panic, which is totally
bogus. On top of that, there are some variables that can be left
unitialized in those cases, which might cause it fail with memory
access violation instead of panic while trying to load kernel to
a wrong or non-existing address of memory.

Augment the code to properly deal with the loader being below or
at the lower bound of the memory region in question. Also, don't
leave ununitialized variables behind.

Reviewed by:	ian
2015-06-19 17:00:36 +00:00
Baptiste Daroussin
27823c59c5 Fix fallouts from r284590
Reported by:	kib
2015-06-19 14:20:21 +00:00
Baptiste Daroussin
bda8af6860 Install loader(8) and zfsloader(8) only once
Differential Revision:	https://reviews.freebsd.org/D2841
Reviewed by:	imp
2015-06-19 05:42:24 +00:00
Oleksandr Tymoshenko
224fba2b43 Add HDMI support to Beaglebone Black:
- Add driver for TDA19988 HDMI framer
- Add simple interface to communicate with HDMI sink: read EDID and set videomode
- Add event-based API to notify LCD controller when HDMI sink is available
- Add HDMI framer node and add refernce to it to lcdc node. This part of
    DTS tree is custom and does not match Linux DTS because Linux uses
    combination of pseudo-node in DTS and hardcoded driver information
    that does not map to our model.
2015-06-18 00:57:52 +00:00
Simon J. Gerraty
ccfb965433 Add META_MODE support.
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.

Still need to add real targets under targets/ to build packages.

Differential Revision:       D2796
Reviewed by: brooks imp
2015-06-13 19:20:56 +00:00