vm_map_lookup{,_locked}() to vm_map_lookup_entry(). Having the fast path
in vm_map_lookup{,_locked}() limits its benefits to page faults. Moving
it to vm_map_lookup_entry() extends its benefits to other operations on
the vm map.
did not compared nc_dvp with supplied parent directory vnode pointer.
Add the check and note that now branches for vp != NULL and vp == NULL
are the same, thus can be merged.
Reported and reviewed by: kan
Tested by: pho
MFC after: 2 weeks
and re-enable it as default.
In particular:
+ re-enable the 'update' flag in the Makefile (of course!);
+ commit Warner's patch "orb $NOUPDATE,_FLAGS(%bp)"
to avoid writing to disk in case of a timeout/default choice;
+ fix an off-by-one count in the partition scan code that would
print the wrong name for unknown partitions;
+ unconditionally change the boot prompt to 'Boot:' instead of 'Default:'
to make room for the extra code/checks/messages. Some of the changes
listed below are also made to save space;
+ rearrange and fix comments for known partition types. Right now we
explicitly recognise *BSD, Linux, FAT16 (type 6, used on many USB keys),
NTFS (type 7), FAT32 (type 11).
Depending on other options we also recognise Extended (type 5),
FAT12 (type 1) and FAT16 < 32MB (type 4).
+ Add an entry "F6 PXE" when the code is built with -DPXE (which is
a default now). Technically, F6 boots through INT18, so the prompt 'PXE'
is a bit misleading. Unfortunately the name INT18
is too long and does not fit in - we could use ROM perhaps.
The reason I picked 'PXE' is that on many (I believe) new systems
INT18 calls PXE.
Apart from the choice of the name for PXE/ROM/INT18, this should close
pending issues on the 1-sector boot0 code and we should be able to
move the code to RELENG_7 when it reopens.
No boot0cfg changes are necessary.
MFC after: 3 weeks
It seems I forgot to remove `int error' from a single piece of code. I'm
also moving ogetkerninfo() to kern_xxx.c, because it belongs to the
class of compat system information system calls, not the generic sysctl
code.
pfs_vncache_free() that removes pvd from the list, while it is not yet
put on the list.
Prevent the invalid removal from the list by clearing pvd_next and
pvd_prev for the newly allocated pvd, and only move pfs_vncache list
head when the pvd was at the head.
Suggested and approved by: des
MFC after: 2 weeks
In the existing code we didn't really enforce that callers hold Giant
before calling userland_sysctl(), even though there is no guarantee it
is safe. Fix this by just placing Giant locks around the call to the oid
handler. This also means we only pick up Giant for a very short period
of time. Maybe we should add MPSAFE flags to sysctl or phase it out all
together.
I've also added SYSCTL_LOCK_ASSERT(). We have to make sure sysctl_root()
and name2oid() are called with the sysctl lock held.
Reviewed by: Jille Timmermans <jille quis cx>
compare map->timestamp with saved timestamp after map read lock is
reacquired, not with saved timestamp + 1. The only consequence of the +1
was unconditional lookup of the next map entry, though.
Tested by: pho
Approved by: des
MFC after: 2 weeks
may need to lock arbitrary vnodes, causing either lock order reversal or
recursive vnode lock acquisition.
Tested by: pho
Approved by: des
MFC after: 2 weeks
do pfs_vncache_alloc() for the same pfs_node and pid. In this case, we
could end up with two vnodes for the pair. Recheck the cache under the
locked pfs_vncache_mutex after all sleeping operations are done [1].
This case mostly cannot happen now because pseudofs uses exclusive vnode
locking for lookup. But it does drop the vnode lock for dotdot lookups,
and Marcus' pseudofs_vptocnp implementation is vulnerable too.
Do not call free() on the struct pfs_vdata after insmntque() failure,
because vp->v_data points to the structure, and pseudofs_reclaim()
frees it by the call to pfs_vncache_free().
Tested by: pho [1]
Approved by: des
MFC after: 2 weeks
E.g., .MAKE.JOB.PREFIX=${.newline}---[${.MAKE.PID}]
would produce
---[1234] target ---
2. Added ${.newline} as a simple means of being able to include '\n' in the
assignment of .MAKE.JOB.PREFIX
Obtained from: NetBSD
Log:
- merge in latest xenbus from dfr's xenhvm
- fix race condition in xs_read_reply by converting tsleep to mtx_sleep
Log:
unmask evtchn in bind_{virq, ipi}_to_irq
Log:
- remove code for handling case of not being able to sleep
- eliminate tsleep - make sleeps atomic
changes since the last imported OpenBSM release:
OpenBSM 1.1 alpha 4
- With the addition of BSM error number mapping, we also need to map the
local error number passed to audit_submit(3) to a BSM error number,
rather than have the caller perform that conversion.
- Reallocate user audit events to avoid collisions with Solaris; adopt a
more formal allocation scheme, and add some events allocated in Solaris
that will be of immediate use on other platforms.
- Add an event for Calife.
- Add au_strerror(3), which allows generating strings for BSM errors
directly, rather than requiring applications to map to the local error
space, which might not be able to entirely represent the BSM error
number space.
- Major auditd rewrite for launchd(8) support. Add libauditd library
that is shared between launchd and auditd.
- Add AUDIT_TRIGGER_INITIALIZE trigger (sent via 'audit -i') for
(re)starting auditing under launchd(8) on Mac OS X.
- Add 'current' symlink to active audit trail.
- Add crash recovery of previous audit trail file when detected on audit
startup that it has not been properly terminated.
- Add the event AUE_audit_recovery to indicated when an audit trail file
has been recovered from not being properly terminated. This event is
stored in the new audit trail file and includes the path of recovered
audit trail file.
- Mac OS X and FreeBSD dependent code in auditd.c is separated into
auditd_darwin.c and auditd_fbsd.c files.
- Add an event for the posix_spawn(2) and fsgetpath(2) Mac OS X system
calls.
- For Mac OS X, we use ASL(3) instead of syslog(3) for logging.
- Add support for NOTICE level logging.
OpenBSM 1.1 alpha 3
- Add two new functions, au_bsm_to_errno() and au_errno_to_bsm(), to map
between BSM error numbers (largely the Solaris definitions) and local
errno(2) values for 32-bit and 64-bit return tokens. This is required
as operating systems don't agree on some of the values of more recent
error numbers.
- Fix a bug how au_to_exec_args(3) and au_to_exec_env(3) calculates the
total size for the token. This bug resulted in "unknown" tokens being
printed after the exec args/env tokens.
- Support for AUT_SOCKET_EX extended socket tokens, which describe a
socket using a pair of IPv4/IPv6 and port tuples.
- OpenBSM BSM file header version bumped for 1.1 release.
- Deprecated Darwin constants, such as TRAILER_PAD_MAGIC, removed.
Obtained from: TrustedBSD Project
Sponsored by: Apple Inc.
options. Using the already included std.avila is not considered
to be entirely right (and the options slightly differ) but the best
match we currently have. Upcoming work should fit better.
Reorder another variable to match the layout of other configs.
Reviewed by: sam, warner (earlier version with options removed)
variable name for the inpcb.
For consistency with the other *_hdrsiz functions use 'size'
instead of 'siz' as variable name.
No functional change.
MFC after: 4 weeks
- Always use round brackets with return ().
- Add empty line to beginning of functions without local variables.
- Comments start with a capital letter and end in a '.'.
While there adapt a few comments.
Reviewed by: rwatson
MFC after: 4 weeks
arrays under #ifndef XEN to make XEN config compile again.
In case of Xen vm_guest is hard coded.
Move the list for the vm_guest sysctl out of the restictive
bounds as the sysctl is there in either case.
Note, that the patch provided with this card for the Linux states that
the card uses DEFAULT_RCLK * 2, while in fact it is '* 10'. So probably
we should also use the subdevice/subvendord here. For now just ignore
that fact.
PR: kern/129665
Submitted by: bsam
Obtained from: united efforst with bsam
`make universe'. This catches a few more arm and, once enabled, mips
configs and permits having local configs named like NOINET6.
Reviewed by: phk
MFC after: 4 weeks
plex. If the plex is a raid5 plex, and is being written to, parity data might
have to be read from the underlying disks, requiring them to be opened for
reading as well as writing.
MFC after: 1 week
