Compare pointers with NULL rather than treating them as booleans.
Compare pointers with NULL rather than 0 to make it more clear
they are pointers.
Assign pointers value of NULL rather than 0 to make it more clear
they are pointers.
MFC after: 3 days
through umass(4), in order to make cdcontrol(1) to issue commands to
a USB CD driver.
The command IDs were obtained from the CAM subsystem. This was tested
on half dozen of USB CD drivers from different vendors.
Suggested by: "intron" <intron at intron dot ac>
PR: usb/83439
Reviewed by: sanpei
MFC After: 1 week
It does not work with ng_ubt(4) and require special driver and firmware.
Obtained from: Marcel Holtmann < marcel at holtmann dot org >
Submitted by: Rainer Goellner < rainer at jabbe dot de >
MFC after: 3 days
o Add Agere Hermes II and II.5 PC Cards (from zipit web page), TDK
GlobalNetworker 3410 (from dmesg for my card) and another alternate
PANASONIC KXLC0005_2 (from pcmcia-cs id lists).
hokie and much more readable and expand the comment to explain why it is
the way that it is.
- Close a race where one CPU could free the process belonging to a thread
on another CPU that hasn't quite finished exiting yet but is beyond the
point of setting the process state as PRS_ZOMBIE.
Reported and tested by: ps (2)
MFC after: 3 days
- Introduce a subsystem mutex, natm_mtx, manipulated with accessor macros
NATM_LOCK_INIT(), NATM_LOCK(), NATM_UNLOCK(), NATM_LOCK_ASSERT(). It
protects the consistency of pcb-related data structures. Finer grained
locking is possible, but should be done in the context of specific
measurements (as very little work is done in netnatm -- most is in the
ATM device driver or socket layer, so there's probably not much
contention).
- Remove GIANT_REQUIRED, mark as NETISR_MPSAFE, remove
NET_NEEDS_GIANT("netnatm").
- Conditionally acquire Giant when entering network interfaces for
ifp->if_ioctl() using IFF_LOCKGIANT(ifp)/IFF_UNLOCKGIANT(ifp) in order
to coexist with non-MPSAFE atm ifnet drivers..
- De-spl.
MFC after: 2 weeks
Reviewed by: harti, bms (various versions)
there are at least two versions of the adapter. Version 1 (product ID 0x2200)
of the adapter does not work with ng_ubt(4) and require special driver and
firmware. Version 2 (product ID 0x3800) seems to work just fine, except it
does not have bDeviceClass, bDeviceSubClass and bDeviceProtocol set to required
(by specification) values. This change forces ng_ubt(4) to attach to the
version 2 adapter.
Obtained from: Marcel Holtmann <marcel at holtmann dot org>
Submitted by: Rainer Goellner <rainer at jabbe dot de>
problems we were having properly mapping the CIS attr space on some
cards. Those problems have been solved other ways, so this kludge is
no longer necessary. Remove it and have pccards come up a whole
second faster.
implement the OHCI programming interface. Thus it probes, but fails
to attach because of an invalid OHCI version. Rather than count on
the downstream tests properly failing, print a message that this
chipset isn't supported and fail the probe.
16-bit cards when we're powering them up. Other bridges may have
similar issues, so we do this for all of them by setting the
interrupt in the PCIC register 3 to be 0 (done always anyway)
and turning on the bit in the bridge control register to route these
interrupts via the ISA bus (or via the interrupt configured in the
PCIC register 3). '0' means disable completely. There's a small
chance this may interfere with the o2micro power hacks, but I'll
wait for reports to come in from o2micro users.
o Expand some of the comments about why we do certain things.
# this gets rid of the interrupt storm warnings on my 505TS. I think
# that we may need to do something similar on suspend, but I'm unsure
# since I don't have a laptop that supports suspened/resume with a
# ricoh chipset in it.
are string names for their respective UMA zones and malloc types, and
are passed into uma_zcreate() and MALLOC_DEFINE(). Export them
outside of _KERNEL in mbuf.h so that netstat can reference them.
Change the names to improve consistency, with each zone/type
associated with the mbuf allocator being prefixed mbuf_.
MFC after: 1 week
card. Mask it while we're doing power things, as the PC Card standard
suggests. Also, poll the POWER_CYCLE bit 10x a second as well as
providing a timeout for power cycle interrupt to happen.
The Ricoh '475 that I have doesn't seem to generate an interrupt for
power at the present time, so the polling is necessary for reasons as
yet unknown. This results in an interrupt storm warning that I'm
still trying to quantify (the o2micro trick doesn't work to mitigate
this storm). At the very least, this should help those users that
lost pccards on boot with the prior rev of this code. My VAIO
PCG-505TS is now happier, but more investigation is necessary.
If a character cannot be converted to DOS code page,
unix2doschr() returned `0'. As a result, unix2dosfn()
was forced to return `0', so we saw a file which was
composed of these characters as `Invalid argument'.
To correct this, if a character can be converted to
Unicode, unix2doschr() now returns `1' which is a magic
number to make unix2dosfn() know that the character
must be converted to `_'.
[2] unix2dosfn()
The above-mentioned solution only works if a file
has both of Unicode name and DOS code page name.
Unicode name would not be recorded if file name
can be settled within 11 bytes (DOS short name)
and if no conversion from Unix charset to DOS code
page has occurred. Thus, FreeBSD can create a file
which has only short name, but there is no guarantee
that the short name contains allways valid characters
because we leave it to people by using mount_msdosfs(8)
to select which conversion is used between DOS code
page and unix charset.
To avoid this, Unicode file name should be recorded
unless a character is an ascii character. This is
the way Windows XP do.
PR: 77074 [1]
MFC after: 1 week
per-CPU cache statistics. UMA sizes the cache array based on the
number of CPUs at boot (mp_maxid + 1), and iterating based on MAXCPU
could read off the end of the array (into the next zone).
Reported by: yongari
MFC after: 1 week
it covers the following of the uc_alloc/freebucket cache pointers.
Originally, I felt that the race wasn't helped by holding the mutex,
hence a comment in the code and not holding it across the cache access.
However, it does improve consistency, as while it doesn't prevent
bucket exchange, it does prevent bucket pointer invalidation. So a
race in gathering cache free space statistics still can occur, but not
one that follows an invalid bucket pointer, if the mutex is held.
Submitted by: yongari
MFC after: 1 week
variables rather than void * variables. This makes it easier and simpler
to get asm constraints and volatile keywords correct.
MFC after: 3 days
Tested on: i386, alpha, sparc64
Compiled on: ia64, powerpc, amd64
Kernel toolchain busted on: arm
the case of an RTM_CHANGE was specific, i.e. that it matched completely. This
led to a route change of a non-existent route changing the default route
as the radix code would simply back track to that point and hand that
route back to the routing socket code.
PR: 82974
Reviewed by: Tai-hwa Liang <avatar@mmlab.cse.yzu.edu.tw>
Ben Kaduk <minimarmot@gmail.com>
Bjoern A. Zeeb <bzeeb-lists@lists.zabbadoz.net>
Obtained from: OpenBSD with modifications.
MFC after: 2 weeks
succeed. There are many printers that return status over the read
channel, and if we wait for the status to become ready, then we can't
find the status automatically. Linux doesn't wait, nor does it ever
seem to really check the status in any meaningful way... If there
really is a problem, the writes to the bulk out endpoint will still
fail (like they would if the printer was ready and then ran out of
paper or became unready).
In addition, there are a number of printers being made that emulate
the 'status' byte by returning '0' always rather than '0x18'. This
fixes the EBUSY on open timeouts on those printer as well.
Reviewed by: the defining silence on usb@
