For three years now CAM does not use SIM lock, but still enforces SIM to
use it. Remove this requirement, allowing SIMs to have any locking they
prefer, if they pass no mutex to cam_sim_alloc().
MFC after: 2 weeks
Some SIMs report much less untagged device openings then tagged ones.
Target mode devices are not handled by regular probing routines, and so
there is nothing to increase queue size for them to the SIM's maximum.
To fix that resize the queue explicitly on ctl periph registration.
This radically improves performance of mpt(4) in target mode.
Also fetch and report device queue statistics in `ctladm dumpstructs`,
since regular way of `camcontrol tags` is not usable in target mode.
MFC after: 2 weeks
Queue statistics has nothing to do with presence or absence of INQUIRY
data, etc. Target mode devices are never configured, but have queues.
MFC after: 2 weeks
Some SIMs may not abort them implicitly, that either fail the LUN disable
request or just make us wait for those CCBs forever. With this change
I can successfully disable LUNs on mpt(4). For isp(4), which aborts them
implicitly, this change should be irrelevant.
MFC after: 2 weeks
Report UNMAP granularity as stripesize/-offset if we have no other values
to report there.
Add new quirk DA_Q_STRICT_UNMAP for cases when target is too critical to
misaligned UNMAP request, reporting errors instead of being suboptimal.
Setting this quirk makes da periph to forcefully align all UNMAP requests
to avoid those errors by the cost of some odd ranges not being UNMAP'ed.
This makes UNMAP usable within VMware 6.x VMs, just now 100% efficient.
MFC after: 2 weeks
For now it allows to unload CTL kernel module if there are no target-capable
SIMs in CAM. As next step full teardown of CAM targets can be implemented.
CAM_UNLOCKED is internal flag and cannot correctly be set by userland.
Return EINVAL from CAMIOCOMMAND and CAMIOQUEUE if it is set.
Also fix leaks in some of the error paths for CAMIOQUEUE.
PR: 215356
Reviewed by: ken, mav
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D9869
The biggest change is that ctl_remove_initiator() now generates I_T NEXUS
LOSS event, cleaning part of LUs state related to the initiator.
MFC after: 2 weeks
If we asked to send sense data by setting CAM_SEND_SENSE, but SIM didn't
confirm transmission by setting CAM_SENT_SENSE, assume it was not sent.
Queue the I/O back to CTL for later REQUEST SENSE with ctl_queue_sense().
This is needed for error reporting on SPI HBAs like ahc(4)/ahd(4).
MFC after: 2 weeks
This code was disabled due to its high memory usage. But now we need this
functionality for cfumass(4) frontend, since USB MS BBB transport does not
support autosense.
MFC after: 2 weeks
When LUN is disabled, SIM starts returning queued ATIOs/INOTs. But at the
same time there can be some ATIOs/INOTs still carrying real new requests.
If we free those, SIM may leak some resources, forever expecting for any
response from us. So try to be careful, separating ATIOs/INOTs carrying
requests which still must be processed, from ATIOs/INOTs completed with
errors which can be freed.
MFC after: 2 weeks
Before this change XCOPY code could allocate memory in chunks up to 16-32MB
(VMware does XCOPY in 4MB chunks by default), that could be difficult for
VM subsystem to do due to KVA fragmentation, that sometimes created huge
allocation delays, blocking any I/O for respective LU for that time.
This change limits allocations down to TPC_MAX_IO_SIZE, which is 1MB now.
1MB is also not a cookie, but ZFS also can do that for large blocks, so
it should be less dramatic. As drawback this increases CPU overhead, but
it still look acceptable comparing to time consumed by ZFS read/write.
MFC after: 1 week
sys/cam/ctl/ctl.c:
In ctl_datamove(), inside CTL_IO_DELAY, add a lun variable and fill
it in before trying to dereference it.
MFC after: 3 days
Sponsored by: Spectra Logic
Before this change MaxCmdSN was reported as CmdSN + delta, that made it
limit number of requests in transmission from the initiator to target,
that was pretty useless. After this change MaxCmdSN limits number of
requests queued to CTL, i.e. maximal queue depth for the initiator.
The default limit is 256 outstanding requests per initiator at a time.
This code uses existing cs_outstanding_ctl_pdus counter to track queue
depth. It's semantics doen't perfectly match, but close enough to not
add another counter. Just don't set the maxtags below 2.
MFC after: 2 weeks
all of them in terms of an sbuf-based back-end, xpt_path_sbuf. This
unifies the implementation, but more importantly it stops the output
fropm being split between 4 or more invocations of printf. The
multiple invocations cause interleaving of the messages on the
console during boot, making the output of disk discovery often
unintelligible. This change helps a lot, but more work is needed.
Reviewed by: ken, mav
Sponsored by: Netflix
If "capacity" LU option is set, ramdisk backend now implements featured
thin provisioned disk, storing data in malloc(9) allocated memory blocks
of pblocksize bytes (default PAGE_SIZE or 4KB). Additionally ~0.2% of LU
size is used for indirection tree (bigger pblocksize reduce the overhead).
Backend supports all unmap and anchor operations. If configured capacity
is overflowed, proper error conditions are reported.
If "capacity" LU option is not set, the backend operates mostly the same
as before without allocating real storage: writes go to nowhere, reads
return zeroes, reporting that all LBAs are unmapped.
This backend is still mostly oriented on testing and benchmarking (it is
still a volatile RAM disk), but now it should allow to run real FS tests,
not only simple dumb dd.
MFC after: 2 weeks
It is only a first step and not perfect, but better then nothing.
The main blocker is CAM target frontend, that can not be unloaded,
since CAM does not have mechanism to unregister periph driver now.
MFC after: 2 weeks
The length of the scsi_set_timestamp_parameters struct was incorrect. LTO-5
drives don't care, but LTO-7 drives do.
Reviewed by: Sam Klopsch
MFC after: 2 weeks
Sponsored by: Spectra Logic Corp
This field has no practical use and never readed. Initiators already
receive respective residual size from frontends. Removed field had
different semantics, which looks useless, and was never passed through
by any frontend.
While there, fix kern_data_resid field support in case of HA, missed in
r312291.
MFC after: 13 days
It seems like kern_data_resid was never really implemented. This change
finally does it. Now frontends update this field while transferring data,
while CTL/backends getting it can more flexibly handle the result.
At this point behavior should not change significantly, still reporting
errors on write overrun, but that may be changed later, if we decide so.
CAM target frontend still does not properly handle overruns due to CAM API
limitations. We may need to add some fields to struct ccb_accept_tio to
pass information about initiator requested transfer size(s).
MFC after: 2 weeks
