Repeating the default WARNS here makes it slightly more difficult to
experiment with default WARNS changes, e.g. if we did something absolutely
bananas and introduced a WARNS=7 and wanted to try lifting the default to
that.
Drop most of them; there is one in the blake2 kernel module, but I suspect
it should be dropped -- the default WARNS in the rest of the build doesn't
currently apply to kernel modules, and I haven't put too much thought into
whether it makes sense to make it so.
Detected on NetBSD:
# nm /usr/lib/libc.so|grep sanit
/public/src.git/lib/libc/citrus/modules/citrus_mapper_std.c:173:8:
runtime error: left shift of 1 by 31 places cannot be represented in type 'int'
Obtained from: NetBSD (CVS Rev. 1.11)
MFC after: 1 week
break is probably intended and correct,
but has no correctness implications due to is94 => is96
Reviewed by: cem, jilles
Reported by: swildner@DragonFlyBSD.org
MFC After: 1 week
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using mis-identified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Make some use of reallocarray, attempting to limit it to cases where the
parameters are unsigned and there is some theoretical chance of overflow.
MFC afer: 2 weeks
Differential Revision: https://reviews.freebsd.org/D9980
This both avoids some dependencies on xinstall.host and allows
bootstrapping on older releases to work due to lack of at least 'install -l'
support.
Sponsored by: EMC / Isilon Storage Division
This is required by our FORTIFY_SOURCE implementation as it
does more inlining. As a rule of thumb, FORTIFY_SOURCE doubles
the number of inlines except that in grep inlining
blows up for some reason.
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
encoded chunk of a UTF-7 string, treat that as an incomplete character and
return an error instead of a shift sequence and no error.
Also check that the low 2 bytes have a valid value.
MFC after: 1 week
the input buffer.
_citrus_UTF7_mbtoutf16 stored the decoder state at the beginning so it
could restore this state on an incomplete character such that the next
call would restart the decoding. The problem was that "-" (end of base64
mode) at the end of a string was also treated as an incomplete character
but was also removed from the state buffer. So the initial state would be
restored (with base64 mode) and the next call would no longer see the "-"
so it continued in base64 mode.
This state saving/restoring isn't needed here. It's already handled
elsewhere (citrus_iconv_std.c:_citrus_iconv_std_iconv_convert) so just
remove it.
Also initialise *nresult.
PR: 200398
Tested by: delphij
MFC after: 1 week
fields of a private struct such that variables of this type are
initialised correctly. Fixes conversion from ISO 2022.
Also do this in the BIG5 module to prevent similar errors in the future.
- In the libiconv module for EUC-TW replace 2^cs with 1<<cs. Fixes
conversion from EUC-TW.
- Synchronise iconv code with NetBSD. In most cases this only updates
the RCS id because the changes are already there or are NetBSD specific.
+ libc/iconv/citrus_csmapper.c: Add a comment.
+ libc/iconv/citrus_db_factory.c: Remove put16().
+ libc/iconv/citrus_iconv.c: Return EINVAL on error.
+ libc/iconv/citrus_mapper.c: Return EINVAL on error.
+ libc/iconv/citrus_memstream.c: Fix type of a variable.
+ libc/iconv/citrus_prop.h: Sync definition of _CITRUS_PROP_HINT_END.
+ libc/iconv/citrus_stdenc.c: Return EINVAL on error.
+ libiconv_modules/mapper_std/citrus_mapper_std.c: Plug memory leak.
Obtained from: NetBSD
MFC after: 2 weeks
fact I should actually waited the build to be finished before
committing.
A proper fix would be committed once my test build passes.
Pointy hat to: delphij
fields of an internal struct so it corresponds with the way variables of
this type are initialised.
PR: 185964
Submitted by: Manuel Mausz <manuel-freebsd@mausz.at>
MFC after: 5 days
when there is an invalid character in the output codeset while it is
valid in the input. However, POSIX requires iconv() to perform an
implementation-defined conversion on the character. So, Citrus iconv converts
such a character to a special character which means it is invalid in the
output codeset.
This is not a problem in most cases but some software like libxml2 depends
on GNU's behavior to determine if a character is output as-is or another form
such as a character entity (&#NNN;).
- Add ' to the list of directly encoded characters and * to the list of
optionally directly encoded characters as per RFC 2152.
- In _citrus_UTF7_mbtoutf16 on end of input when the next output character
has only been partially decoded, save a copy of the buffer of input
characters (not just its length). On the next call with more input
characters this buffer is reprocessed together with the new input to
form a fully decoded output character.
- At the end of a base64 encoded sequence fully discard '-' (BASE64_OUT)
by decrementing psenc->chlen and i. This is needed to make room in
psenc->ch (input buffer) in case the next input character starts a new
base64 encoded sequence. And also, if this is the end of input and no
output character can be returned, this brings the encoder in the initial
state as indicated by _citrus_UTF7_stdenc_get_state_desc_generic which
is used by the caller to distinguish between no output and partial
output.
- In _citrus_UTF7_mbrtowc_priv pass the s parameter (input pointer)
directly to _citrus_UTF7_mbtoutf16 instead of a copy (s0). This way s
is updated correctly in case of errors.
- In _citrus_UTF7_mbrtowc_priv when called with psenc->surrogate set
(previous call did not have enough input), retrieve the previously
decoded UTF-16 character from (psenc->cache >> psenc->bits) instead of
(psenc->cache >> 2).
MFC after: 5 days
setting. It can be built by setting the WITH_ICONV knob. While this
knob is unset, the library part, the binaries, the header file and
the metadata files will not be built or installed so it makes no impact
on the system if left turned off.
This work is based on the iconv implementation in NetBSD but a great
number of improvements and feature additions have been included:
- Some utilities have been added. There is a conversion table generator,
which can compare conversion tables to reference data generated by
GNU libiconv. This helps ensuring conversion compatibility.
- UTF-16 surrogate support and some endianness issues have been fixed.
- The rather chaotic Makefiles to build metadata have been refactored
and cleaned up, now it is easy to read and it is also easier to add
support for new encodings.
- A bunch of new encodings and encoding aliases have been added.
- Support for 1->2, 1->3 and 1->4 mappings, which is needed for
transliterating with flying accents as GNU does, like "u.
- Lots of warnings have been fixed, the major part of the code is
now WARNS=6 clean.
- New section 1 and section 5 manual pages have been added.
- Some GNU-specific calls have been implemented:
iconvlist(), iconvctl(), iconv_canonicalize(), iconv_open_into()
- Support for GNU's //IGNORE suffix has been added.
- The "-" argument for stdin is now recognized in iconv(1) as per POSIX.
- The Big5 conversion module has been fixed.
- The iconv.h header files is supposed to be compatible with the
GNU version, i.e. sources should build with base iconv.h and
GNU libiconv. It also includes a macro magic to deal with the
char ** and const char ** incompatibility.
- GNU compatibility: "" or "char" means the current local
encoding in use
- Various cleanups and style(9) fixes.
Approved by: delphij (mentor)
Obtained from: The NetBSD Project
Sponsored by: Google Summer of Code 2009
