shorter than its size resulting in a hole as its final block (which
is a violation of the invarients of the UFS filesystem).
Soft updates will always ensure that the file size is correct when
writing inodes to disk for files that contain only direct block
pointers. However soft updates does not roll back sizes for files
with indirect blocks that it has set to unallocated because their
contents have not yet been written to disk. Hence, the file can
appear to have a hole at its end because the block pointer has been
rolled back to zero when its inode was written to disk. Thus,
fsck_ffs calculates the last allocated block in the file. For files
that extend into indirect blocks, fsck_ffs checks for a size past
the last allocated block of the file and if that is found, shortens
the file to reference the last allocated block thus avoiding having
it reference a hole at its end.
Submitted by: Chuck Silvers <chs@netflix.com>
Tested by: Chuck Silvers <chs@netflix.com>
MFC after: 1 week
Sponsored by: Netflix
January 2018 changes -r327723 and -r327821. The softdep_bp_to_mp()
function failed to include VFIFO as one of the valid cases.
Although fifo's do not allocate blocks in the filesystem, they will
allocate blocks if they use extended attributes (such as ACLs). Thus,
softdep_bp_to_mp() needs to return a non-NULL mount pointer when
presented with a fifo vnode so that the soft updates write complete
will properly process the soft updates structures associated with the
extended attribute blocks. It was the failure to process these soft
updates structures, thus leaving them hanging off the buffer, which
lead to the "panic: softdep_deallocate_dependencies: dangling deps"
when trying to clean up the buffer after it was written.
PR: 230962
Reported by: 2t8mr7kx9f@protonmail.com
Reviewed by: kib
Tested by: Peter Holm
MFC after: 1 week
Sponsored by: Netflix
set of known soft dependency data structures now includes: sd_worklist,
sd_inodedep, sd_allocdirect, sd_allocindir, and sd_mkdir. DDB can
also print lists of sd_allinodedeps, sd_mkdir_list, and sd_workhead.
The sd_workhead script is useful for listing all the dependencies
associated with a buffer, e.g. bp->b_dep.
Prefix the soft dependency show names with sd_ so that they sort
together when listed by DDB's "show help" and to distinguish them
from other data structures printable by DDB.
Sponsored by: Netflix
o In vm_pager_bufferinit() create pbuf_zone and start accounting on how many
pbufs are we going to have set.
In various subsystems that are going to utilize pbufs create private zones
via call to pbuf_zsecond_create(). The latter calls uma_zsecond_create(),
and sets a limit on created zone. After startup preallocate pbufs according
to requirements of all pbuf zones.
Subsystems that used to have a private limit with old allocator now have
private pbuf zones: md(4), fusefs, NFS client, smbfs, VFS cluster, FFS,
swap, vnode pager.
The following subsystems use shared pbuf zone: cam(4), nvme(4), physio(9),
aio(4). They should have their private limits, but changing that is out of
scope of this commit.
o Fetch tunable value of kern.nswbuf from init_param2() and while here move
NSWBUF_MIN to opt_param.h and eliminate opt_swap.h, that was holding only
this option.
Default values aren't touched by this commit, but they probably should be
reviewed wrt to modern hardware.
This change removes a tight bottleneck from sendfile(2) operation, that
uses pbufs in vnode pager. Other pagers also would benefit from faster
allocation.
Together with: gallatin
Tested by: pho
vnodeops make FFS1's fifoops1 use ffs_lock. Also delete ffs_reallocblks
from fifoops1 which is needed only for fifoops2 because of its
support for extended attributes that need to allocate blocks.
Suggested by: kib
If invalid, return EINVAL. Note that inode check-hashes greatly
reduce the chance that these errors will go undetected.
Reported by: Christopher Krah <krah@protonmail.com>
Reported as: FS-5-UFS-2: Denial Of Service in nmount-3 (ffs_read)
Reviewed by: kib
MFC after: 1 week
Sponsored by: Netflix
M sys/fs/ext2fs/ext2_vnops.c
M sys/kern/vfs_subr.c
M sys/ufs/ffs/ffs_snapshot.c
M sys/ufs/ufs/ufs_vnops.c
The vnode is not opened, so it ends up with the malloced buffers otherwise.
Reported and tested by: pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
the check-hash fails. Prior to the fix in -r342133 the inode with the
zeroed out check-hash was written back to disk causing further confusion.
Reported by: Gary Jennejohn (gj)
Sponsored by: Netflix
before copying in the inode so that the mode and link-count are not set
if the check-hash fails. This change ensures that the vnode will be properly
unwound and recycled rather than being held in the cache.
Initialize the file mode is zero so that if the loading of the inode
fails (for example because of a check-hash failure), the vnode will be
properly unwound and recycled.
Reported by: Gary Jennejohn (gj)
Sponsored by: Netflix
"panic: softdep_update_inodeblock: bad link count" when releasing
a partially initialized vnode after an inode check-hash failure.
Reported by: Gary Jennejohn <gljennjohn@gmail.com>
Reported by: Peter Holm (pho)
Sponsored by: Netflix
check hash to the filesystem inodes. Access attempts to files
associated with an inode with an invalid check hash will fail with
EINVAL (Invalid argument). Access is reestablished after an fsck
is run to find and validate the inodes with invalid check-hashes.
This check avoids a class of filesystem panics related to corrupted
inodes. The hash is done using crc32c.
Note this check-hash is for the inode itself and not any of its
indirect blocks. Check-hash validation may be extended to also
cover indirect block pointers, but that will be a separate (and
more costly) feature.
Check hashes are added only to UFS2 and not to UFS1 as UFS1 is
primarily used in embedded systems with small memories and low-powered
processors which need as light-weight a filesystem as possible.
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
deletion is active, specifically after a call to ffs_blkrelease_start()
but before the call to ffs_blkrelease_finish(), ffs_blkrelease_start()
will have handed out SINGLETON_KEY rather than starting a collection
sequence. Thus if we get a SINGLETON_KEY passed to ffs_blkrelease_finish(),
we just return rather than trying to finish the nonexistent sequence.
Reported by: Warner Losh (imp@)
Sponsored by: Netflix
superblock has a check-hash error, an error message noting the
superblock check-hash failure is printed and the mount fails. The
administrator then runs fsck to repair the filesystem and when
successful, the filesystem can once again be mounted.
This approach fails if the filesystem in question is a root filesystem
from which you are trying to boot. Here, the loader fails when trying
to access the filesystem to get the kernel to boot. So it is necessary
to allow the loader to ignore the superblock check-hash error and make
a best effort to read the kernel. The filesystem may be suffiently
corrupted that the read attempt fails, but there is no harm in trying
since the loader makes no attempt to write to the filesystem.
Once the kernel is loaded and starts to run, it attempts to mount its
root filesystem. Once again, failure means that it breaks to its prompt
to ask where to get its root filesystem. Unless you have an alternate
root filesystem, you are stuck.
Since the root filesystem is initially mounted read-only, it is
safe to make an attempt to mount the root filesystem with the failed
superblock check-hash. Thus, when asked to mount a root filesystem
with a failed superblock check-hash, the kernel prints a warning
message that the root filesystem superblock check-hash needs repair,
but notes that it is ignoring the error and proceeding. It does
mark the filesystem as needing an fsck which prevents it from being
enabled for writing until fsck has been run on it. The net effect
is that the reboot fails to single user, but at least at that point
the administrator has the tools at hand to fix the problem.
Reported by: Rick Macklem (rmacklem@)
Discussed with: Warner Losh (imp@)
Sponsored by: Netflix
predates metadata check hashes so that it is done before deciding
whether to compute a check-hash of the superblock.
Reported by: Rick Macklem <rmacklem@uoguelph.ca>
Sponsored by: Netflix
This corrects a bug that prevented snapshots from being mounted due to a
superblock check-hash failure.
Reported by: Brennan Vincent <brennan@umanwizard.com>
Tested by: Peter Holm (pho@)
Sponsored by: Netflix
Directory entries must be padded to maintain alignment; in many
filesystems the padding was not initialized, resulting in stack
memory being copied out to userspace. With the ino64 work there
are also some explicit pad fields in struct dirent. Add a subroutine
to clear these bytes and use it in the in-tree filesystems. The
NFS client is omitted for now as it was fixed separately in r340787.
Reported by: Thomas Barabosch, Fraunhofer FKIE
Reviewed by: kib
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
The d_off field has been added to the dirent structure recently.
Currently filesystems don't support this feature. Support has been
added and tested for zfs, ufs, ext2fs, fdescfs, msdosfs and unionfs.
A stub implementation is available for cd9660, nandfs, udf and
pseudofs but hasn't been tested.
Motivation for this feature: our usecase is for a userspace nfs server
(nfs-ganesha) with zfs. At the moment we cache direntry offsets by
calling lseek once per entry, with this patch we can get the offset
directly from getdirentries(2) calls which provides a significant
speedup.
Submitted by: Jack Halford <jack@gandi.net>
Reviewed by: mckusick, pfg, rmacklem (previous versions)
Sponsored by: Gandi.net
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D17917
document the libufs interface for fetching and storing inodes.
The undocumented getino / putino interface has been replaced
with a new getinode / putinode interface.
Convert the utilities that had been using the undocumented
interface to use the new documented interface.
No functional change (as for now the libufs library does not
do inode check-hashes).
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
This will enable callers to take const paths as part of syscall
decleration improvements.
Where doing so is easy and non-distruptive carry the const through
implementations. In UFS the value is passed to an interface that must
take non-const values. In ZFS, const poisoning would touch code shared
with upstream and it's not worth adding diffs.
Bump __FreeBSD_version for external API consumers.
Reviewed by: kib (prior version)
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17805
Flags prevent open(2) and *at(2) vfs syscalls name lookup from
escaping the starting directory. Supposedly the interface is similar
to the same proposed Linux flags.
Reviewed by: jilles (code, previous version of manpages), 0mp (manpages)
Discussed with: allanjude, emaste, jonathan
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D17547
check hash to the superblock. If a check hash fails when an attempt
is made to mount a filesystem, the mount fails with EINVAL (Invalid
argument). This avoids a class of filesystem panics related to
corrupted superblocks. The hash is done using crc32c.
Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily
used in embedded systems with small memories and low-powered processors
which need as light-weight a filesystem as possible.
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
UFS quotaoff iterates over all mp vnodes, and derefences and clears
the pointers to corresponding dquots. If SU work items transiently
reference some of dquots,quotaoff() would eventually fail, but all
processed vnodes are already stripped from dquots. The state is
problematic, since quotas are left enabled, but there is no dquots
where blocks and inodes can be accounted. The result is assertion
failures and NULL pointer dereferences.
Fix it by suspending writes around quotaoff() call. Since the
filesystem is synced, no dandling references to dquots from SU
workitems can left behind, which means that quotaoff succeeds.
The complication there is that quotaoff VFS op is performed with the
mount point busied, while to suspend, we need to start write on the
mp. If vn_start_write() is called on busied mp, system might deadlock
against parallel unmount request. Handle this by unbusy-ing mp before
starting write, which in turn requires changing the quotaoff()
interface to return with the mount point not busied, same as was done
for quotaon().
Reviewed by: mckusick
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D17208
Doing so can deadlock when the thread already owns another vnode lock,
e.g. during a rename, as was demonstrated by the reporter. In fact,
there seems to be no need to force the call to getinoquota() always,
because vn_open() locks vnode exclusively, and this is the most
important case. To add to the point, directories where the dirent is
added or removed, are locked exclusively as well.
Reported by: bwidawsk
Tested by: bwidawsk, pho (as part of the larger patch)
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
MFC after: 1 week
found that performance was no worse and usually better when running
with TRIM consolidation. Performance improvement was most noticable
when multiple large files are released in a short period of time.
Thus, TRIM consolidation is being enabled by default. Should
operational problems be found, it can be disabled using the command
`sysctl vfs.ffs.dotrimcons=0'. This variable can also be set as a
tunable if early disabling is necessary.
Approved by: re (gjb)
Sponsored by: Netflix
given in random(4).
This includes updating of the relevant man pages, and no-longer-used
harvesting parameters.
Ensure that the pseudo-unit-test still does something useful, now also
with the "other" algorithm instead of Yarrow.
PR: 230870
Reviewed by: cem
Approved by: so(delphij,gtetlow)
Approved by: re(marius)
Differential Revision: https://reviews.freebsd.org/D16898
blocks of a file as contiguously as possible. Since the filesystem
does not know how large a file will grow when it is first being
written, it initially places the file in a set of blocks in which
it currently fits. As it grows, it is relocated to areas with
larger contiguous blocks. In this way it saves its large contiguous
sets of blocks for the files that need them and thus avoids
unnecessaily fragmenting its disk space.
We used to skip reallocating the blocks of a file into a contiguous
sequence if the underlying flash device requested BIO_DELETE
notifications, because devices that benefit from BIO_DELETE also
benefit from not moving the data. However, in the algorithm described
above that reallocates the blocks, the destination for the data is
usually moved before the data is written to the initially allocated
location. So we rarely suffer the penalty of extra writes. With
the addition of the consolodation of contiguous blocks into single
BIO_DELETE operations, having fewer but larger contiguous blocks
reduces the number of (slow and expensive) BIO_DELETE operations.
So when doing BIO_DELETE consolodation, we do block reallocation.
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
When deleting files on filesystems that are stored on flash-memory
(solid-state) disk drives, the filesystem notifies the underlying
disk of the blocks that it is no longer using. The notification
allows the drive to avoid saving these blocks when it needs to
flash (zero out) one of its flash pages. These notifications of
no-longer-being-used blocks are referred to as TRIM notifications.
In FreeBSD these TRIM notifications are sent from the filesystem
to the drive using the BIO_DELETE command.
Until now, the filesystem would send a separate message to the drive
for each block of the file that was deleted. Each Gigabyte of file
size resulted in over 3000 TRIM messages being sent to the drive.
This burst of messages can overwhelm the drive's task queue causing
multiple second delays for read and write requests.
This implementation collects runs of contiguous blocks in the file
and then consolodates them into a single BIO_DELETE command to the
drive. The BIO_DELETE command describes the run of blocks as a
single large block being deleted. Each Gigabyte of file size can
result in as few as two BIO_DELETE commands and is typically less
than ten. Though these larger BIO_DELETE commands take longer to
run, they do not clog the drive task queue, so read and write
commands can intersperse effectively with them.
Though this new feature has been throughly reviewed and tested, it
is being added disabled by default so as to minimize the possibility
of disrupting the upcoming 12.0 release. It can be enabled by running
``sysctl vfs.ffs.dotrimcons=1''. Users are encouraged to test it.
If no problems arise, we will consider requesting that it be enabled
by default for 12.0.
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
driven by problems found with the algorithms being tested for TRIM
consolodation.
Reported by: Peter Holm
Suggested by: kib
Reviewed by: kib
Sponsored by: Netflix
jails since FreeBSD 7.
Along with the system call, put the various security.jail.allow_foo and
security.jail.foo_allowed sysctls partly under COMPAT_FREEBSD11 (or
BURN_BRIDGES). These sysctls had two disparate uses: on the system side,
they were global permissions for jails created via jail(2) which lacked
fine-grained permission controls; inside a jail, they're read-only
descriptions of what the current jail is allowed to do. The first use
is obsolete along with jail(2), but keep them for the second-read-only use.
Differential Revision: D14791
a smaller number of larger TRIM requests. The hope had been to have
the full TRIM consolodation in place for 12.0, but the algorithms
are still under development and need further testing. With this
framework in place it will be possible to easily add TRIM consolodation
once the optimal strategy has been found.
The only functional change with this patch is the elimination of TRIM
requests for blocks that are freed before they have been likely to
have been written.
Reviewed by: kib
Discussed with: Warner Losh and Chuck Silvers
Sponsored by: Netflix
(incorrectly) called while another suspension is already active.
PR: 230220
Reported by: dexuan
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The timespecadd(3) family of macros were imported from NetBSD back in
r35029. However, they were initially guarded by #ifdef _KERNEL. In the
meantime, we have grown at least 28 syscalls that use timespecs in some
way, leading many programs both inside and outside of the base system to
redefine those macros. It's better just to make the definitions public.
Our kernel currently defines two-argument versions of timespecadd and
timespecsub. NetBSD, OpenBSD, and FreeDesktop.org's libbsd, however, define
three-argument versions. Solaris also defines a three-argument version, but
only in its kernel. This revision changes our definition to match the
common three-argument version.
Bump _FreeBSD_version due to the breaking KPI change.
Discussed with: cem, jilles, ian, bde
Differential Revision: https://reviews.freebsd.org/D14725
It can occur during ordinary use of softupdates, or perhaps if writes to the
underlying media fail (causing bufs to be redirtied). Either way, it is not
particularly actionable.
Reviewed by: imp, kib
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D16258
Avoid Undefined Behavior in ffs_clusteracct()
Change the type of 'bit' variable from int to unsigned int and use unsigned
values consistently.
sys/ufs/ffs/ffs_subr.c:336:10, shift exponent -1 is negative
Detected with Kernel Undefined Behavior Sanitizer.
Reported by <Harry Pantazis>
Submitted by: Pedro Giffuni
Convert integer structure flags to use um_flags:
int um_candelete; /* devvp supports TRIM */
int um_writesuspended; /* suspension in progress */
become:
#define UM_CANDELETE 0x00000001 /* devvp supports TRIM */
#define UM_WRITESUSPENDED 0x00000002 /* suspension in progress */
This is in preparation for adding other flags to indicate forcible
unmount in progress after a disk failure and possibly forcible
downgrade to read-only.
No functional change intended.
Sponsored by: Netflix
The reference counting that's done in the geom_vfs layer to prevent
delivery of requests to defunct devices only works if all requests go
through that layer. UFS was bypassing that layer for BIO_DELETE requests,
sending them to the geom_consumer directly with g_io_request. Allocate
a buf, fill it in, and call strategy on it instead.
Submitted by: Chuck Silvers
Reviewed by: scottl, imp, kirk
Sponsored by: Netflix
Differential: https://reviews.freebsd.org/D15456
- Create getblkx(9) variant of getblk(9) which can return error.
- Add GB_NOSPARSE flag for getblk()/getblkx() which requests that BMAP
was performed before the buffer is created, and EJUSTRETURN returned
in case the requested block does not exist.
- Make ffs_read() use GB_NOSPARSE to avoid instantiating buffer (and
allocating the pages for it), copying from zero_region instead.
The end result is less page allocations and buffer recycling when a
hole is read, which is important for some benchmarks.
Requested and reviewed by: jeff
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D14917
Followup to r313780. Also prefix ext2's and nandfs's versions with
EXT2_ and NANDFS_.
Reported by: kib
Reviewed by: kib, mckusick
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D9623
to fix the memory leak that I introduced in r328426. Instead of
trying to clear up the possible memory leak in all the clients, I
ensure that it gets cleaned up in the source (e.g., ffs_sbget ensures
that memory is always freed if it returns an error).
The original change in r328426 was a bit sparse in its description.
So I am expanding on its description here (thanks cem@ and rgrimes@
for your encouragement for my longer commit messages).
In preparation for adding check hashing to superblocks, r328426 is
a refactoring of the code to get the reading/writing of the superblock
into one place. Unlike the cylinder group reading/writing which
ends up in two places (ffs_getcg/ffs_geom_strategy in the kernel
and cgget/cgput in libufs), I have the core superblock functions
just in the kernel (ffs_sbfetch/ffs_sbput in ffs_subr.c which is
already imported into utilities like fsck_ffs as well as libufs to
implement sbget/sbput). The ffs_sbfetch and ffs_sbput functions
take a function pointer to do the actual I/O for which there are
four variants:
ffs_use_bread / ffs_use_bwrite for the in-kernel filesystem
g_use_g_read_data / g_use_g_write_data for kernel geom clients
ufs_use_sa_read for the standalone code (stand/libsa/ufs.c
but not stand/libsa/ufsread.c which is size constrained)
use_pread / use_pwrite for libufs
Uses of these interfaces are in the UFS filesystem, geoms journal &
label, libsa changes, and libufs. They also permeate out into the
filesystem utilities fsck_ffs, newfs, growfs, clri, dump, quotacheck,
fsirand, fstyp, and quot. Some of these utilities should probably be
converted to directly use libufs (like dumpfs was for example), but
there does not seem to be much win in doing so.
Tested by: Peter Holm (pho@)
