Commit Graph

182 Commits

Author SHA1 Message Date
Warner Losh
3aabc15941 In ppsintr, we needed ppsdev to get to the softc and nothing else.
Save a memory dereference in the ISR by passing this in directly.
Calling pps_capture is MP safe for all other operations on struct
pps_state, so there's no need to aquire the lock before we do this,
even from a fast ISR.  Avoid dereferencing sc->ppbus until after
pps_capture is called as well.  These actions reduce somewhat the
cache effects that cause variance in interrupt times.  On an
especially slow test machine (300MHz Cyrix GXm), this reduces the
interrupt latency about about 10% (from 21us to 19us) and helps a
little with the variance (although most of the variance seems to be
caused by lots of interrupt masking).

This also happens fixes one or two of bde's style issues.
2005-04-14 15:56:10 +00:00
Warner Losh
092cb1258f When locking a MTX_SPIN, one needs to use mtx_lock_spin.
Lock the timeout routine as well.

Submitted by: bde
2005-03-17 20:45:24 +00:00
Poul-Henning Kamp
cac283487f Remove unused variable.
Detected by:	Coverity (ID#704)
2005-03-17 09:32:37 +00:00
Warner Losh
7606170151 Make the pps interrupt register as MPSAFE and FAST. Use a spin lock
to syncrhonize access to the data as a result.  This makes the pps
less likely to miss the 1ms pulse that I'm feeding it, but not
entirely reliable yet on my 133MHz P5.

Reviewed by: phk
2005-03-11 07:03:46 +00:00
Warner Losh
8dce0b0cf8 Kill trailing white space 2005-03-10 22:21:16 +00:00
Warner Losh
2966a60c0f Back out previous commit. The description didn't match the commit,
and marking this interrupt as fast isn't quite right.  It also needs
to be MP Safe, and I've not done that work (yet).
2005-03-06 06:59:15 +00:00
Warner Losh
6b9907e7f8 Use BUS_PROBE_DEFAULT for pci probe return value 2005-03-05 18:10:49 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Andre Oppermann
3161f583ca Apply error and success logic consistently to the function netisr_queue() and
its users.

netisr_queue() now returns (0) on success and ERRNO on failure.  At the
moment ENXIO (netisr queue not functional) and ENOBUFS (netisr queue full)
are supported.

Previously it would return (1) on success but the return value of IF_HANDOFF()
was interpreted wrongly and (0) was actually returned on success.  Due to this
schednetisr() was never called to kick the scheduling of the isr.  However this
was masked by other normal packets coming through netisr_dispatch() causing the
dequeueing of waiting packets.

PR:		kern/70988
Found by:	MOROHOSHI Akihiko <moro@remus.dti.ne.jp>
MFC after:	3 days
2004-08-27 18:33:08 +00:00
Robert Watson
68c7bc6de8 Since if_plip doesn't contain locking or run with INTR_MPSAFE, mark
the interface as IFF_NEEDSGIANT so if_start is run holding Giant.
2004-08-13 23:32:17 +00:00
Olivier Houchard
0f2f1f7124 Do not bzero() the softc, as newbus does it for us. 2004-07-09 16:56:46 +00:00
Olivier Houchard
c8b9c2d913 Newbus returns a zeroed softc, so there's no need to call bzero() here. 2004-07-09 13:42:05 +00:00
Poul-Henning Kamp
89c9c53da0 Do the dreaded s/dev_t/struct cdev */
Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
Poul-Henning Kamp
fe12f24bb0 Add missing <sys/module.h> includes 2004-05-30 20:08:47 +00:00
Guido van Rooij
a5c7e3bb70 Prevent the strange situation that after each load/unload of a ppbus
device, the device is probed multiple times (so each device is
detected N times after unloading/loading the module N-1 times).

The real fix is (quote Doug and Warner):
> : In an ideal world, there should be some kind of BUS_UNIDENTIFY method
> : which a driver could use to delete the devices it created in
> : BUS_IDENTIFY.
>
> Or the bus would have a driver deleted routine that got called and it
> would remove all instances of the devclass attached to it.

Reviewed by:	Doug Rabson & Warner Losh
2004-03-18 21:10:11 +00:00
Poul-Henning Kamp
dc08ffec87 Device megapatch 4/6:
Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.

Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
2004-02-21 21:10:55 +00:00
Poul-Henning Kamp
c9c7976f7f Device megapatch 1/6:
Free approx 86 major numbers with a mostly automatically generated patch.

A number of strategic drivers have been left behind by caution, and a few
because they still (ab)use their major number.
2004-02-21 19:42:58 +00:00
Ruslan Ermilov
ebbdb48fe6 Apparently there's a good reason why M_WAITOK malloc() is done before
xpt_create_path().
2004-01-18 13:09:38 +00:00
Ruslan Ermilov
703981ae28 Fixed a memory leak.
Submitted by:	Stanford Metacompilation research group
2004-01-18 12:32:06 +00:00
Sam Leffler
437ffe1823 o eliminate widespread on-stack mbuf use for bpf by introducing
a new bpf_mtap2 routine that does the right thing for an mbuf
  and a variable-length chunk of data that should be prepended.
o while we're sweeping the drivers, use u_int32_t uniformly when
  when prepending the address family (several places were assuming
  sizeof(int) was 4)
o return M_ASSERTVALID to BPF_MTAP* now that all stack-allocated
  mbufs have been eliminated; this may better be moved to the bpf
  routines

Reviewed by:	arch@ and several others
2003-12-28 03:56:00 +00:00
Brooks Davis
9bf40ede4a Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By:	re (in principle)
Reviewed By:	njl, imp
Tested On:	i386, amd64, sparc64
Obtained From:	NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
Brooks Davis
29f245657a Remove unused lp_unit member from softc. 2003-10-30 23:30:35 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Warner Losh
51d3b6d1cc Define a module version. 2003-08-22 06:28:45 +00:00
John Baldwin
8b149b5131 Consistently use the BSD u_int and u_short instead of the SYSV uint and
ushort.  In most of these files, there was a mixture of both styles and
this change just makes them self-consistent.

Requested by:	bde (kern_ktrace.c)
2003-08-07 15:04:27 +00:00
John Baldwin
659be635a4 Fix a printf warning from the recent CAM changes. 2003-05-01 19:46:21 +00:00
Poul-Henning Kamp
60794e0478 Centralize the devstat handling for all GEOM disk device drivers
in geom_disk.c.

As a side effect this makes a lot of #include <sys/devicestat.h>
lines not needed and some biofinish() calls can be reduced to
biodone() again.
2003-03-08 08:01:31 +00:00
Jonathan Lemon
1cafed3941 Update netisr handling; Each SWI now registers its queue, and all queue
drain routines are done by swi_net, which allows for better queue control
at some future point.  Packets may also be directly dispatched to a netisr
instead of queued, this may be of interest at some installations, but
currently defaults to off.

Reviewed by: hsu, silby, jayanth, sam
Sponsored by: DARPA, NAI Labs
2003-03-04 23:19:55 +00:00
Poul-Henning Kamp
7ac40f5f59 Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by:    re(scottl)
2003-03-03 12:15:54 +00:00
Dag-Erling Smørgrav
521f364b80 More low-hanging fruit: kill caddr_t in calls to wakeup(9) / [mt]sleep(9). 2003-03-02 16:54:40 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Jens Schweikhardt
d64ada501a Fix typos, mostly s/ an / a / where appropriate and a few s/an/and/
Add FreeBSD Id tag where missing.
2002-12-30 21:18:15 +00:00
Robert Watson
2066d8e707 Synchronize mode for ppsX devices to that found previously in MAKEDEV
for consistency.

Submitted by:	kris
2002-12-27 16:34:12 +00:00
Robert Watson
805229eb77 Synchronize make_dev() for pcfclock devices to the values in MAKEDEV
for consistency.

Submitted by:	kris
2002-12-27 16:32:10 +00:00
Sam Leffler
673d91916d network interface driver changes:
o don't strip the Ethernet header from inbound packets; pass packets
  up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by:	many
Approved by:	re
2002-11-14 23:54:55 +00:00
Alfred Perlstein
29f194457c Fix instances of macros with improperly parenthasized arguments.
Verified by: md5
2002-11-09 12:55:07 +00:00
John Baldwin
8d667a42c4 d_read_t functions return an int, not a ssize_t. (Considering the fact
that read(2) returns a ssize_t perhaps this is a bug in d_read_t?)
2002-11-07 17:26:38 +00:00
John Baldwin
a885bb6007 Warning fixes for sizeof(int) != sizeof(void *). 2002-11-07 17:25:33 +00:00
John Baldwin
9e14a48a03 - Make 'irq' intptr_t instead of uintptr_t so it handles a value of -1
properly.
- Add a cast to quiet a printf warning.
2002-11-07 17:20:58 +00:00
Poul-Henning Kamp
668b05c376 Remove empty #if*/#endif clauses. 2002-09-21 08:44:51 +00:00
Philippe Charnier
93b0017f88 Replace various spelling with FALLTHROUGH which is lint()able 2002-08-25 13:23:09 +00:00
Peter Wemm
daefef7cae Fix warnings due to macro varargs. 2002-05-24 06:32:18 +00:00
Poul-Henning Kamp
7bf758bff0 Simplify the RFC2783 and PPS_SYNC timestamp collection API. 2002-04-26 20:24:28 +00:00
Bernd Walter
338cad62ab This makes ppbus childs like lpt and ppi succesfully connect to more
than just the first ppbus.
The child drivers always tried to attach unit 0.

Reviewed by:	gallatin
Approved by:	gallatin
2002-04-07 22:06:20 +00:00
Nicolas Souchu
c17d43407f Major rework of the iicbus/smbus framework:
- VIA chipset SMBus controllers added
	- alpm driver updated
	- Support for dynamic modules added
	- bktr FreeBSD smbus updated but not tested
	- cleanup
2002-03-23 15:49:15 +00:00
Peter Wemm
0d87e7d007 Fix some gcc-3.1+ warnings:
warning: deprecated use of label at end of compound statement
umass.c:2626:46: multi-line string literals are deprecated
2002-03-19 23:20:21 +00:00
Warner Losh
d7e53105ec Make this driver a better citizen by moving dev creation and
other initialization into attach from probe.  Also hide a few
printfs behind a bootverbose.

approved in principle by: phk
2001-12-19 19:37:31 +00:00
David E. O'Brien
6e551fb628 Update to C99, s/__FUNCTION__/__func__/,
also don't use ANSI string concatenation.
2001-12-10 08:09:49 +00:00
Poul-Henning Kamp
bd61b8e81d Give the pps driver an additional 8 inputs if we can persuade the
ppc to go into EPP mode.  These 8 inputs are timestamped in polled
loop so their resolution will be nanoseconds but their granularity
will only be 1/hz.
2001-09-22 16:34:59 +00:00