DMU sync code calls taskq_dispatch() for each sublist of os_dirty_dnodes
and os_synced_dnodes. Since the number of sublists by default is equal
to number of CPUs, it will dispatch equal, potentially large, number of
tasks, waking up many CPUs to handle them, even if only one or few of
sublists actually have any work to do.
This change adds check for empty sublists to avoid this.
Fixes panic when loading ipfw.ko and if_epair.ko built with modern compiler.
Similar to arm64 and riscv, when using a modern compiler (!gcc4.2), code
generated tries to access data in the wrong location, causing kernel panic
(data storage interrupt trap) when loading if_epair and ipfw.
Issue was reproduced with kernel/module compiled using gcc8 and clang8. It
affects both ELFv1 and ELFv2 ABI environments.
PR: 232387
Submitted by: alfredo.junior_eldorado.org.br
Reported by: Mark Millard
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D20461
instead of a linear array.
The multicast memberships for the inpcb structure are protected by a
non-sleepable lock, INP_WLOCK(), which needs to be dropped when
calling the underlying possibly sleeping if_ioctl() method. When using
a linear array to keep track of multicast memberships, the computed
memory location of the multicast filter may suddenly change, due to
concurrent insertion or removal of elements in the linear array. This
in turn leads to various invalid memory access issues and kernel
panics.
To avoid this problem, put all multicast memberships on a STAILQ based
list. Then the memory location of the IPv4 and IPv6 multicast filters
become fixed during their lifetime and use after free and memory leak
issues are easier to track, for example by: vmstat -m | grep multi
All list manipulation has been factored into inline functions
including some macros, to easily allow for a future hash-list
implementation, if needed.
This patch has been tested by pho@ .
Differential Revision: https://reviews.freebsd.org/D20080
Reviewed by: markj @
MFC after: 1 week
Sponsored by: Mellanox Technologies
The final server unref should be done by the server thread to prevent
deadlock in the client cdevpriv destructor, which cannot destroy
itself.
MFC after: 1 week
Sponsored by: Mellanox Technologies
error response after clipping the first map entry in the region to be
reserved. This creates a pair of matching entries that should have
been "simplified" back into one, or never created. This change defers
the clipping of that entry until those two vm_map_protect failure
cases have been ruled out.
Reviewed by: alc
Approved by: markj (mentor)
Differential Revision: https://reviews.freebsd.org/D20711
Use the cam_ed copy of ata_params rather than malloc and freeing
memory for it. This reaches into internal bits of xpt a little, and
I'll clean that up later.
Create ata_param_fixup
Create a common fixup routine to do the canonical fixup of the
ata_param fixup. Call it from both the ATA and the ATA over SCSI
paths.
Go ahead and completely fix the ata_params before calling the veto
function. This breaks nothing that uses it in the tree since
ata_params is ignored in storvsc_ada_probe_veto which is the only
in-tree consumer.
Remove a lingering use of splbio().
The buffer must be locked by the caller. No functional change
intended.
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.
Numerous posts to arch@ and other locations have found no actual users
for this software.
Relnotes: Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
Summary:
PowerPC has two PLT models: BSS-PLT and Secure-PLT. BSS-PLT uses runtime
code generation to generate the PLT stubs. Secure-PLT was introduced with
GCC 4.1 and Binutils 2.17 (base has GCC 4.2.1 and Binutils 2.17), and is a
more secure PLT format, using a read-only linkage table, with the dynamic
linker populating a non-executable index table.
This is the libc, rtld, and kernel support only. The toolchain and build
parts will be updated separately.
Reviewed By: nwhitehorn, bdragon, pfg
Differential Revision: https://reviews.freebsd.org/D20598
MFC after: 1 month
Print warnings for some bad kernel configurations (like NUMA disabled
with multiple domains). Check and report some firmware errors (like
incorrect proximity domain entries).
Differential Revision: https://reviews.freebsd.org/D20416
We now support multiple ITS blocks raising interrupts to a CPU.
Add all available CPUs to the ITS when no NUMA information is
available.
This reverts the check added in r340602, at that tim we did not
suppport multiple ITS blocks for a CPU.
Differential Revision: https://reviews.freebsd.org/D20417
Now that GICV3_IVAR_REDIST is available, GICV3_IVAR_REDIST_VADDR
is unused and can be removed. Drop the define and add a comment.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D20454
had been done years ago. I did. All this time we've only compiled a LINT
kernel for TARGET_ARCH=arm. Now separate LINT-V5 and LINT-V7 configs are
generated and built.
There are two new files in arm/conf, NOTES.armv5 and NOTES.armv7, containing
some of what used to be in the arm NOTES file. That file now contains only
the bits that are common to v5 and v7.
The makeLINT.mk file now creates the LINT-V5 and LINT-V7 files by concatening
sys/conf/NOTES, arm/conf/NOTES, and arm/conf/NOTES.armv{5,7} in that order.
Port the code to block on turnstile instead of yielding, to lock-less
delayed invalidation. The yield might cause tight loop due to priority
inversion.
Since it is impossible to avoid race between block and wake-up, arm
1-tick callout to wakeup when thread blocks itself.
Reported and tested by: mjg
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 months
Differential revision: https://reviews.freebsd.org/D20636
into existing files for sugid processes.
Despite using real user id pronounces the intent, it actually breaks
suid coredumps, while not making any difference for non-sugid
processes. The reason for the breakage is that non-existent core file
is created with the effective uid (unless weird hacks like SUIDDIR are
configured).
Then, if user enabled kern.sugid_coredump, core dumping should not
overwrite core files owned by effective uid, but we cannot pretend to
use real uid for dumping.
PR: 68905
admbugs: 358
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
perform a TLB invalidation. A barrier suffices. (See r343876.)
Add a comment to pmap_enter_quick_locked() in order to highlight the
fact that it does not replace valid mappings.
Correct a typo in one of pmap_enter()'s comments.
MFC after: 1 week
Since SES specs do not define mechanism to map enclosure slots to SATA
disks, AHCI EM code I written many years ago appeared quite useless,
that always bugged me. I was thinking whether it was a good idea, but
if LSI HBAs do that, why I shouldn't?
This change introduces simple non-standard mechanism for the mapping
into both AHCI EM and SES code, that makes AHCI EM on capable controllers
(most of Intel's) a first-class SES citizen, allowing it to report disk
physical path to GEOM, show devices inserted into each enclosure slot in
`sesutil map` and `getencstat`, control locate and fault LEDs for specific
devices with `sesutil locate adaX on` and `sesutil fault adaX on`, etc.
I've successfully tested this on Supermicro X10DRH-i motherboard connected
with sideband cable of its S-SATA Mini-SAS connector to SAS815TQ backplane.
It can indicate with LEDs Locate, Fault and Rebuild/Remap SES statuses for
each disk identical to real SES of Supermicro SAS2 backplanes.
MFC after: 2 weeks
(1) pmap_remove(), where it eliminates redundant TLB invalidations by
pmap_remove() and pmap_remove_l3(), and (2) pmap_enter_l2(), where it may
optimize the TLB invalidations by batching them.
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D12725
Until r349278, bhyve presented a seg_max to the guest that was too large.
Detect this case and clamp it to the virtqueue size. Otherwise, we would
fail the "too many segments to enqueue" assertion in virtqueue_enqueue().
I hit this by running a guest with a MAXPHYS of 256 KB.
Reviewed by: bryanv cem
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20703
SES specifications tell: "The Additional Element Status descriptors shall
be in the same order as the status elements in the Enclosure Status
diagnostic page". It allows us to question ELEMENT INDEX that is lower
then values we already processed. There are many SAS2 enclosures with
this kind of problem.
While there, add more specific error messages for cases when ELEMENT INDEX
is obviously wrong. Also skip elements with INVALID bit set.
MFC after: 2 weeks
When some type has 0 elements, saved_individual_element_index was set
to -1 on second type bump, since individual_element_index was not
restored after the first. To me it looks easier just to increment
saved_individual_element_index separately than think when to save it.
MFC after: 2 weeks
Define __daddr_t in _types.h and use it in filio.h
Reported by: ian, bde
Reviewed by: ian, imp, cem
MFC after: 2 weeks
MFC-With: 349233
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20715
