Commit Graph

33 Commits

Author SHA1 Message Date
Xin LI
fd340a1222 sbin/camcontrol: use calloc/strlcpy where appropriate.
MFC after:	2 weeks
2021-01-03 22:52:28 -08:00
Alexander Motin
b7e08f9305 Make GCC happy about math in r350676.
MFC after:	1 week
2019-08-07 15:05:08 +00:00
Alexander Motin
0912877616 Make camcontrol modepage support block descriptors.
It allows to read and write block descriptors alike to mode page parameters.
It allows to change block size or short-stroke HDDs or overprovision SSDs.
Depenting on -P parameter the change can be either persistent or till reset.
In case of block size change device may need reformat after the setting.
In case of SSD overprovisioning format or sanitize may be needed to really
free the flash.

During implementation appeared that csio_encode_visit() can not handle
integers of more then 4 bytes, that makes 8-byte LBA handling awkward.
I had to split it into two 4-byte halves now.

MFC after:	1 week
Relnotes:	yes
Sponsored by:	iXsystems, Inc.
2019-08-07 14:45:10 +00:00
Alexander Motin
e341cfd279 Make camcontrol modepage to use 10 byte commands.
While old devices may not support 10 byte MODE SENSE/MODE SELECT commands,
new ones may not be able to report all mode pages with 6 byte commands.

This patch makes camcontrol by default start with 10 byte commands and
fall back to 6 byte on ILLEGAL REQUEST error, or 6 byte can be forced.

MFC after:	2 weeks
Sponsored by:	iXsystems, Inc.
2019-07-30 20:58:56 +00:00
Pedro F. Giffuni
1de7b4b805 various: general adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.
2017-11-27 15:37:16 +00:00
Kenneth D. Merry
1e773aeb99 When editing a mode page on a tape drive, do not clear the device
specific parameter.

Tape drives include write protect (WP), Buffered Mode and Speed
settings in the device-specific parameter.  Clearing this
parameter on a mode select can have the effect of turning off
write protect or buffered mode, or changing the speed setting of
the tape drive.

Disks report DPO/FUA support via the device specific parameter
for MODE SENSE, but the bit is reserved for MODE SELECT.  So we
clear this for disks (and other non-tape devices) to avoid
potential errors from the target device.

sbin/camcontrol/modeedit.c:
	Clear the device-specific parameter in the mode page
	header if we're not operating on a tape drive.

MFC after:	3 days
Sponsored by:	Spectra Logic
2017-05-05 21:29:28 +00:00
Kenneth D. Merry
492a2ef556 Add task attribute support to camcontrol(8).
Users can use the new generic argument, -Q task_attr, to specify a task
attribute (simple, ordered, head of queue, aca) for the commands issued.
The the default is simple, which works with all SCSI devices that support
tagged queueing.

This will mostly be useful for debugging target behavior in certain
situations.

You can try it out by compiling CTL with CTL_IO_DELAY turned on (in
sys/cam/ctl/ctl_io.h) and then do something like this with one of the CTL
LUNs:

ctladm delay 0:0 -l done -t 10
camcontrol tur da34 -v

And at then before the 10 second timer is up, in another terminal:

camcontrol inquiry da34 -Q ordered -v

The Inquiry should complete just after the TUR completes.  Ordinarily
it would complete first because of the delay injection, but because the
task attribute is set to ordered in this case, CTL holds it up until the
previous command has completed.

sbin/camcontrol/camcontrol.c:
	Add the new generic argument, -Q, which allows the user to specify
	a SCSI task attribute.  The user can specify task attributes by
	name or numerically.

	Add a new task_attr arguments to SCSI sub-functions.

sbin/camcontrol/attrib.c,
sbin/camcontrol/camcontrol.h,
sbin/camcontrol/fwdownload.c,
sbin/camcontrol/modeedit.c,
sbin/camcontrol/persist.c,
sbin/camcontrol/timestamp.c,
sbin/camcontrol/zone.c:
	Add the new task_attr argument to SCSI sub-functions.

sbin/camcontrol/camcontrol.8:
	Document the new -Q option, and add an example.

Sponsored by:	Spectra Logic
MFC after:	1 week
2017-02-17 20:04:22 +00:00
Alexander Motin
36289c3336 Add checks for received mode page length.
If our buffer is too small, we may receive part of the page, and should
not try read/write past the end of the buffer.

Reported by:	Coverity
CID:		1368374, 1368375
MFC after:	1 week
2017-01-10 20:52:44 +00:00
Alexander Motin
54644e21e8 Make 'camcontrol modepage' support subpages.
MFC after:	2 weeks
2017-01-07 09:56:12 +00:00
Alexander Motin
26b1288f5a Make do_buff_decode() not read past the end of the buffer.
Abort format processing as soon as we have no enough data.

MFC after:	2 weeks
2017-01-07 09:33:11 +00:00
Enji Cooper
ea36ade1d1 Limit RESOLUTION_MAX to INT_MAX, not UINT_MAX (all spelled out) so the
mode value isn't always clipped to -1 when (resolution * size) == 32, which
would have been the case with values => {4i,32b,32t}.

This seems to have been broken in r64382.

MFC after: 1 week
X-MFC with: r289915
PR: 200619
Reported by: Michael Baptist
Submitted by: Lars Skodje
Sponsored by: EMC / Isilon Storage Division
2015-10-25 04:37:00 +00:00
Alexander Motin
c1215c324a Fix mode page length calculation to remove last garbage line from the
`camcontrol mode daX -l` output.

PR
Approved by:	re (gjb)
MFC after:	2 weeks
2013-10-11 17:00:09 +00:00
Ed Schouten
bf70becee6 More -Wmissing-variable-declarations fixes.
In addition to adding `static' where possible:

- bin/date: Move `retval' into extern.h to make it visible to date.c.
- bin/ed: Move globally used variables into ed.h.
- sbin/camcontrol: Move `verbose' into camcontrol.h and fix shadow warnings.
- usr.bin/calendar: Remove unneeded variables.
- usr.bin/chat: Make `line' local instead of global.
- usr.bin/elfdump: Comment out unneeded function.
- usr.bin/rlogin: Use _Noreturn instead of __dead2.
- usr.bin/tset: Pull `Ospeed' into extern.h.
- usr.sbin/mfiutil: Put global variables in mfiutil.h.
- usr.sbin/pkg: Remove unused `os_corres'.
- usr.sbin/quotaon, usr.sbin/repquota: Remove unused `qfname'.
2012-10-19 14:49:42 +00:00
Eitan Adler
b8e4b9659f Fix warning when compiling with gcc46:
error: variable 'freq' set but not used
	error: variable 'mode_pars' set but not used

Reviewed by:	mav
Approved by:	dim
MFC after:	3 days
2012-01-10 02:59:58 +00:00
Ed Schouten
5111cde131 Add missing static keywords to global variables in camcontrol.
While there, make the vendor list const and add appropriate keywords to
functions that use this list.
2011-12-11 11:38:50 +00:00
Ulrich Spörlein
ee4912eb07 Initialize variables before usage.
Found by:	clang static analyzer
Found by:	Coverity Prevent[tm] (CID 7736, 7760)
2010-06-11 17:02:57 +00:00
Peter Grehan
5cfe0423e6 Userland signed char fixes for PPC build. Problems were using a char
return for getopt() and comparing to -1, ditto with fgetc() and EOF,
and using the kg_nice value from <sys/user.h>

Submitted by: Stefan Farfeleder <stefan@fafoe.narf.at>
Reviewed by: obrien, bde (a while back)
Tested lightly on: ppc, i386, make universe
2004-01-22 07:23:36 +00:00
Warner Losh
3c33210ce8 Fix alignment of the trailing \ 2003-08-22 01:56:17 +00:00
Johan Karlsson
398676131f Make this WARNS=6 clean by:
1: add 'const' to char * where needed;
 2: mark unused variables with __unused;
 3: remove double prototypes for mode_edit and mode_list.
 4: moves the global variables 'bus', 'target', and 'lun' into
        the main function and protect them with #ifndef MINIMALISTIC,
 5: renames 3 variable in order not to shadow other things
        index -> indx -- in modepage_dump since index is a function
		from <strings.h.>
        arglist -> arglst -- in the function parse_btl since arglist
                is also a global variable
        convertend -> convertend2 -- in the function editentry_set
                since that name is used two times within the function.
 6: cast 0xffffffff in the macro RESOLUTION_MAX(size) to (int)
        since it is unsigned otherwise.

Tested by:	make universe
Approved by:	ken
2003-08-05 09:19:07 +00:00
David E. O'Brien
bf2783a016 Use __FBSDID. 2003-05-02 06:49:10 +00:00
Ruslan Ermilov
024ae00499 Fixed (soon might be fatal) -Wformat warnings. 2003-03-15 07:56:59 +00:00
Johan Karlsson
c7cf7aa684 Make camcontrol WARNS=2 clean.
Approved by:	ken
2003-02-20 21:07:59 +00:00
Garrett Wollman
b055b157dc Fix syntax errors (labels with no statement). 2002-05-30 21:38:58 +00:00
David E. O'Brien
3d438ad61f Remove 'register' keyword.
It does not help modern compilers, and some may take some hit from it.
(I also found several functions that listed *every* of its 10 local vars with
 "register" -- just how many free registers do people think machines have?)
2002-03-20 17:55:10 +00:00
Kelly Yancey
354a0adabf Fix an order-of-operations bug and properly shift page_control values for
comparison with SMS_PAGE_CTRL_* macros.
2000-08-10 01:20:43 +00:00
John Baldwin
34f71eeb3c Fix a typo in the last commit so that this compiles. 2000-08-09 00:28:09 +00:00
Kelly Yancey
cb498c18f8 Fix some whitespace errors.
Pointed out by:		ps
2000-08-08 09:27:55 +00:00
Kelly Yancey
7e32b20d95 This is an overhaul of the mode page handling in camcontrol as well as
related patches. These include:
	* Mode page editting can be scripted. This involves two
	  things: first, if stdin is not a tty, changes are read from
	  stdin rather than invoking $EDITOR. Second, and more
	  importantly, not all modepage entries must be included in the
	  change set. This means that camcontrol can now gracefully handle
	  more intrusive editting from the $EDITOR, including removal or
	  rearrangement of lines. It also means that you can do stuff
	  like:
		# echo "WCE: 1" | camcontrol modepage da3 -m 8 -e
		# newfs /dev/da3
		# echo "WCE: 0" | camcontrol modepage da3 -m 8 -e
	* Range-checking on user-supplied input values. modeedit.c now
	  uses the field width specifiers to determine the maximum
	  allowable value for a field. If the user enters a value larger
	  than the maximum, it clips the value to the max and warns the
	  user. This also involved patching cam_cmdparse.c to be more
	  consistent with regards to the "count" parameter to arg_put
	  (previously is was the length of strings and 1 for all integral
	  types). The cam_cdbparse(3) man page was also updated to reflect
	  the revised semantics.
	* In the process, I removed the 64 entry limit on mode pages (not
	  that we were even close to hitting that limit). This was a nice
	  side-effect of the other changes.
	* Technically, the new mode editting functionality allows editting
	  of character array entries in mode pages (type 'c' or 'z'),
	  however since buff_encode doesn't grok them it is currently
	  useless.
	* Camcontrol gained two new options related to mode pages: -l and
	  -b. The former lists all available mode pages for a given
	  device. The latter forces mode page display in binary format
	  (the default when no mode page definition was found in
	  scsi_modes).
	* Added support for mode page names to scsi_modes. Allows names to
	  be displayed alongside mode numbers in the mode page
	  listing. Updated scsi_modes to use the new functionality. This
	  also adds the semicolon into the scsi_modes syntax as an
	  optional mode page definition terminator. This is needed to name
	  pages without providing a page format definition.
	* Updated scsi_all.h to include a structure describing mode page
	  headers.
	* Added $FreeBSD$ line to scsi_modes.

Inspired by:	dwhite
Reviewed by:	ken
2000-08-08 06:24:17 +00:00
Matt Jacob
68a9f39184 Do some intptr_t casting for alpha.
Reviewed by:	ken@freebsd.org
2000-01-21 23:19:30 +00:00
Kenneth D. Merry
3def3fe132 Use mkstemp(3) instead of tmpnam(3) when creating temporary files for mode
page editing.

Submitted by:	roberto
Reviewed by:	imp, ken
1999-09-28 02:01:46 +00:00
Peter Wemm
7f3dea244c $Id$ -> $FreeBSD$ 1999-08-28 00:22:10 +00:00
Kenneth D. Merry
c60e19a83b Add a new device specification syntax to camcontrol. It is now possible to
do things like:

camcontrol tur da5
or
camcontrol tur 1:2:0
or
camcontrol tur 1:2

These changes are fully backwards compatible with the original device
specification syntax (-n dev -u unit), so it is possible to use either
method to specify a device now.

The device specification changes do not affect the rescan, reset or debug
commands, since by design, those commands work on a bus or bus:target:lun
basis only.

Also, shorten the default usage statement so that it fits in a 24 column
terminal.  The full usage statement is still available by using the "help"
"-h" or "-?" arguments to camcontrol.

Submitted by:	Joerg Wunsch <joerg_wunsch@interface-business.de>
1999-05-10 23:30:04 +00:00
Justin T. Gibbs
525689f102 Camcontrol - A utility for configuring/manipulating the CAM subsystem
Submitted by:	"Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 06:43:02 +00:00