Commit Graph

9 Commits

Author SHA1 Message Date
John Baldwin
9e58d59f41 - Consolidate module version for the pcf module into just pcf.c instead
of having duplicate versions in each bus attachment.
- Add a DRIVER_MODULE() instance so that the iicbus(4) driver will
  actually attach to pcf(4) driver instances.
- Fix compile of envctrl.c.

Pointy hat:	jhb (3)
2008-08-05 17:39:37 +00:00
John Baldwin
13e3657b7b Add locking to the various iicbus(4) bridge drivers:
- Just grab Giant in the ixp425_iic(4) driver since this driver uses
  a shared address/data register window pair to access the actual
  I2C registers.  None of the other ixp425 drivers lock access to these
  shared address/data registers yet and that would need to be done before
  this could use any meaningful locking.
- Add locking to the interrupt handler and 'iicbus_reset' methods of the
  at91_twi(4) driver.
- Add locking to the pcf(4) driver.  Other pcf(4) fixes include:
  - Don't needlessly zero the softc.
  - Use bus_foo rather than bus_space_foo and remove bus space tag and
    handle from softc.
- The lpbb(4) driver just grabs Giant for now.  This will be refined later
  when ppbus(4) is locked.
- As was done with smbus earlier, move the DRIVER_MODULE() lines to match
  the bus driver (either iicbus or iicbb) to the bridge driver into the
  bridge drivers.

Tested by:	sam (arm/ixp425)
2008-08-04 20:46:15 +00:00
Yoshihiro Takahashi
41f5bd0f6d Don't call bus_deactivate_resource() explicitly before calling
bus_release_resource().  This is needed for pc98 by upcoming nexus related
change.
2007-03-21 03:38:37 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
John Baldwin
57fb5e6097 - Use bus_setup_intr() and bus_teardown_intr() to register device driver
interrupt handlers rather than BUS_SETUP_INTR() and BUS_TEARDOWN_INTR().
  Uses of the BUS_*() versions in the implementation of foo_intr methods
  in bus drivers were not changed.  Mostly this just means that some
  drivers might start printing diagnostic messages like [FAST] when
  appropriate as well as honoring mpsafenet=0.
- Fix two more of the ppbus drivers' identify routines to function
  correctly in the mythical case of a machine with more than one ppbus.
2006-02-22 18:16:26 +00:00
Marius Strobl
fcff691970 Account for ebus(4) defaulting to SYS_RES_MEMORY for memory resources
since ebus.c rev. 1.22.
2005-06-04 20:29:28 +00:00
Marius Strobl
26280d88d7 - Introduce an ofw_bus kobj-interface for retrieving the OFW node and a
subset ("compatible", "device_type", "model" and "name") of the standard
  properties in drivers for devices on Open Firmware supported busses. The
  standard properties "reg", "interrupts" und "address" are not covered by
  this interface because they are only of interest in the respective bridge
  code. There's a remaining standard property "status" which is unclear how
  to support properly but which also isn't used in FreeBSD at present.
  This ofw_bus kobj-interface allows to replace the various (ebus_get_node(),
  ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type()
  vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one.
  This in turn allows to simplify and remove code-duplication in drivers for
  devices that can hang off of more than one OFW supported bus.
- Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the
  drivers for their children to use the ofw_bus kobj-interface. The IVAR-
  interfaces of the Central, EBus and FHC are entirely replaced by this. The
  PCI bus driver used its own kobj-interface and now also uses the ofw_bus
  one. The IVARs special to the SBus, e.g. for retrieving the burst size,
  remain.
  Beware: this causes an ABI-breakage for modules of drivers which used the
  IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be
  recompiled.
  The style-inconsistencies introduced in some of the bus drivers will be
  fixed by tmm@ in a generic clean-up of the respective drivers later (he
  requested to add the changes in the "new" style).
- Convert the powerpc MacIO bus driver and the drivers for its children to
  use the ofw_bus kobj-interface. This invloves removing the IVARs related
  to the "reg" property which were unused and a leftover from the NetBSD
  origini of the code. There's no ABI-breakage caused by this because none
  of these driver are currently built as modules.
  There are other powerpc bus drivers which can be converted to the ofw_bus
  kobj-interface, e.g. the PCI bus driver, which should be done together
  with converting powerpc to use the OFW PCI code from sparc64.
- Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take
  advantage of the ofw_bus kobj-interface and simplify them a bit.

Reviewed by:	grehan, tmm
Approved by:	re (scottl)
Discussed with:	tmm
Tested with:	Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
Marius Strobl
490a46bf68 Unbreak after struct resource was hidden. Tested with EBus front-end on
Sun AXe board.
2004-08-11 21:19:31 +00:00
Marius Strobl
397f6b1e7f Add a first version of a pcf(4) front-end for the Sun i2c devices ("i2c"
is the actual name here) on EBus and which are PCF8584 (on systems having
a boot-bus controller the i2c are said to not be a PCF8584). Similar to the
SUNW,envctrl devices, onboard slaves for monitoring fans, temperatures and
such hang off of these i2c devices. But there's also stuff like EEPROMs
housing the hostid of the system and the boards usally have a connector to
add custom slave devices (on CP1500 there's actually a second PCF8584 with
its own I2C bus for these).
This driver already works fine but I'm not yet sure if access to the slave
devices on CP1400/CP1500 marked as "reserved for factory use" in the docs
should be blocked (most likely these are the voltage controllers wich aren't
meant to be controller by software and even not by the firmware). Once the
issues with polled mode are fixed in the common pcf(4) part in pcf.c, this
front-end should probably honour the poll-mode property of the i2c devices.
Tested on Ultra AXe and CP1500 (Netra t1 100).

OK'ed by:	joerg, nsouch
2004-06-10 21:56:52 +00:00