create managed mappings within the clean submap. To prevent regressions,
add assertions blocking the creation of managed mappings within the clean
submap.
Reviewed by: tegge
earlier in cpu_setregs().
- If we know this CPU has a FPU via cpuid, then just assume the INT16
interface and make the npx device quiet to not clutter the dmesg. This
is true for all Pentium and later CPUs and even some of the later 486dx
CPUs.
Reviewed by: bde
Tested by: ps
MFC after: 1 week
so that we only have to do an ioapic_write() instead of an ioapic_read()
followed by an ioapic_write() every time we mask and unmask level triggered
interrupts. This cuts the execution time for these operations roughly in
half.
Profiled by: Paolo Pisati <p.pisati@oltrelinux.com>
MFC after: 1 week
PCB in which the context of stopped CPUs is stored. To access this
PCB from KDB, we introduce a new define, called KDB_STOPPEDPCB. The
definition, when present, lives in <machine/kdb.h> and abstracts
where MD code saves the context. Define KDB_STOPPEDPCB on i386,
amd64, alpha and sparc64 in accordance to previous code.
a pv entry if the number of entries is below the high water mark for pv
entries.
Use pmap_try_insert_pv_entry() in pmap_copy() instead of
pmap_insert_entry(). This avoids possible recursion on a pmap lock in
get_pv_entry().
Eliminate the explicit low-memory checks in pmap_copy(). The check that
the number of pv entries was below the high water mark was largely
ineffective because it was located in the outer loop rather than the
inner loop where pv entries were allocated. Instead of checking, we
attempt the allocation and handle the failure.
Reviewed by: tegge
Reported by: kris
MFC after: 5 days
back to using the RSDT instead. ACPI-CA already follows this same strategy
as a workaround for yet another instance of brain-damaged BIOS writers.
PR: i386/93963
Submitted by: Masayuki FUKUI <fukui.FreeBSD@fanet.net>
Specifically, on mappings with PG_G set pmap_remove() not only performs
the necessary per-page invlpg invalidations but also performs an
unnecessary invalidation of the entire set of non-PG_G entries.
Reviewed by: tegge
Previously, we tried to allow this only for root. However, we were calling
suser() on the *target* process rather than the current process. This
means that if you can ptrace() a process running as root you can set a
hardware watch point in the kernel. In practice I think you probably have
to be root in order to pass the p_candebug() checks in ptrace() to attach
to a process running as root anyway. Rather than fix the suser(), I just
axed the entire idea, as I can't think of any good reason _at all_ for
userland to set hardware watch points for KVM.
MFC after: 3 days
Also thinks hardware watch points on KVM from userland are bad: bde, rwatson
In at least one benchmark this showed around a 20% performance increase.
If other workloads do benefit from having hyperthreads service interrupts,
we can always make this a loader tunable.
MFC after: 3 days
Tested by: ps
into a separate module. Accordingly, convert the option into a device
named similarly.
Note for MFC: Perhaps the option should stay in RELENG_6 for POLA reasons.
Suggested by: scottl
Reviewed by: cokane
MFC after: 5 days
- Throw out all of the logical APIC ID stuff. The Intel docs are somewhat
ambiguous, but it seems that the "flat" cluster model we are currently
using is only supported on Pentium and P6 family CPUs. The other
"hierarchy" cluster model that is supported on all Intel CPUs with
local APICs is severely underdocumented. For example, it's not clear
if the OS needs to glean the topology of the APIC hierarchy from
somewhere (neither ACPI nor MP Table include it) and setup the logical
clusters based on the physical hierarchy or not. Not only that, but on
certain Intel chipsets, even though there were 4 CPUs in a logical
cluster, all the interrupts were only sent to one CPU anyway.
- We now bind interrupts to individual CPUs using physical addressing via
the local APIC IDs. This code has also moved out of the ioapic PIC
driver and into the common interrupt source code so that it can be
shared with MSI interrupt sources since MSI is addressed to APICs the
same way that I/O APIC pins are.
- Interrupt source classes grow a new method pic_assign_cpu() to bind an
interrupt source to a specific local APIC ID.
- The SMP code now tells the interrupt code which CPUs are avaiable to
handle interrupts in a simpler and more intuitive manner. For one thing,
it means we could now choose to not route interrupts to HT cores if we
wanted to (this code is currently in place in fact, but under an #if 0
for now).
- For now we simply do static round-robin of IRQs to CPUs when the first
interrupt handler just as before, with the change that IRQs are now
bound to individual CPUs rather than groups of up to 4 CPUs.
- Because the IRQ to CPU mapping has now been moved up a layer, it would
be easier to manage this mapping from higher levels. For example, we
could allow drivers to specify a CPU affinity map for their interrupts,
or we could allow a userland tool to bind IRQs to specific CPUs.
The MFC is tentative, but I want to see if this fixes problems some folks
had with UP APIC kernels on 6.0 on SMP machines (an SMP kernel would work
fine, but a UP APIC kernel (such as GENERIC in RELENG_6) would lose
interrupts).
MFC after: 1 week
- Reorder the events in exit(2) slightly so that we trigger the S_EXIT
stop event earlier. After we have signalled that, we set P_WEXIT and
then wait for any processes with a hold on the vmspace via PHOLD to
release it. PHOLD now KASSERT()'s that P_WEXIT is clear when it is
invoked, and PRELE now does a wakeup if P_WEXIT is set and p_lock drops
to zero.
- Change proc_rwmem() to require that the processing read from has its
vmspace held via PHOLD by the caller and get rid of all the junk to
screw around with the vmspace reference count as we no longer need it.
- In ptrace() and pseudofs(), treat a process with P_WEXIT set as if it
doesn't exist.
- Only do one PHOLD in kern_ptrace() now, and do it earlier so it covers
FIX_SSTEP() (since on alpha at least this can end up calling proc_rwmem()
to clear an earlier single-step simualted via a breakpoint). We only
do one to avoid races. Also, by making the EINVAL error for unknown
requests be part of the default: case in the switch, the various
switch cases can now just break out to return which removes a _lot_ of
duplicated PRELE and proc unlocks, etc. Also, it fixes at least one bug
where a LWP ptrace command could return EINVAL with the proc lock still
held.
- Changed the locking for ptrace_single_step(), ptrace_set_pc(), and
ptrace_clear_single_step() to always be called with the proc lock
held (it was a mixed bag previously). Alpha and arm have to drop
the lock while the mess around with breakpoints, but other archs
avoid extra lock release/acquires in ptrace(). I did have to fix a
couple of other consumers in kern_kse and a few other places to
hold the proc lock and PHOLD.
Tested by: ps (1 mostly, but some bits of 2-4 as well)
MFC after: 1 week
Keep accounting time (in per-cpu) cputicks and the statistics counts
in the thread and summarize into struct proc when at context switch.
Don't reach across CPUs in calcru().
Add code to calibrate the top speed of cpu_tickrate() for variable
cpu_tick hardware (like TSC on power managed machines).
Don't enforce monotonicity (at least for now) in calcru. While the
calibrated cpu_tickrate ramps up it may not be true.
Use 27MHz counter on i386/Geode.
Use TSC on amd64 & i386 if present.
Use tick counter on sparc64
it. The former code used to hang older Intel CPUs by trying to get
non-existent TLB info 2^32 times.
Reduce code duplication around the calls to CPUID 0x02 by using
do-while loops.
PR: i386/92977
Tested by: cy
Rename struct thread's td_sticks to td_pticks, we will need the
other name for more appropriately named use shortly. Reduce it
from uint64_t to u_int.
Clear td_pticks whenever we enter the kernel instead of recording
its value as reference for userret(). Use the absolute value of
td->pticks in userret() and eliminate third argument.
Keep track of time spent by the cpu in various contexts in units of
"cputicks" and scale to real-world microsec^H^H^H^H^H^H^H^Hclock_t
only when somebody wants to inspect the numbers.
For now "cputicks" are still derived from the current timecounter
and therefore things should by definition remain sensible also on
SMP machines. (The main reason for this first milestone commit is
to verify that hypothesis.)
On slower machines, the avoided multiplications to normalize timestams
at every context switch, comes out as a 5-7% better score on the
unixbench/context1 microbenchmark. On more modern hardware no change
in performance is seen.
the callers if the exec either succeeds or fails early.
- Move the code to call exit1() if the exec fails after the vmspace is
gone to the bottom of kern_execve() to cut down on some code duplication.
is assigned to xenix_eaccess() instead of AUE_ACCESS, as that is the
intended meaning of the system call. xenix_eaccess() should be
reimplemented using our native eaccess() implementation so that it
works as intended.
Obtained from: TrustedBSD Project
