Commit Graph

107 Commits

Author SHA1 Message Date
Marcel Moolenaar
1814213e06 Fix the build on 64-bit platforms. 2004-09-06 00:07:58 +00:00
Brian Somers
057f1760a8 Make ppp WARNS=5 clean 2004-09-05 01:46:52 +00:00
Philippe Charnier
f0067240a1 Replace various spelling with FALLTHROUGH which is lint()able 2002-08-25 13:30:43 +00:00
Brian Somers
3627fe880c A better prinflike fix... 2002-06-15 08:03:59 +00:00
Brian Somers
3db951841c Fix a printflike format error 2002-06-15 01:36:36 +00:00
Brian Somers
d4ff125fc1 Increase the maximum FSM option length to 50 2002-05-22 21:17:13 +00:00
Brian Somers
de59e178aa o Clean up some #includes
o Bump version number to 3.0.4
o When talking to a RADIUS server, provide a NAS-Port-Type.

  When the NAS-Port-Type is Ethernet, provide a NAS-Port value equal
  to the SESSIONID from the environment in direct mode or the
  NGM_PPPOE_SESSIONID message in other modes.  If no SESSIONID is found,
  default to the interface index in client mode or zero in server mode.

  When the NAS-Port-Type is ISDN, set the NAS-Port to the minor number
  of the physical device (ie, the N in /dev/i4brbchN).

  This makes it easier for the RADIUS server to identify the client
  WRT accounting data etc.

Prompted by:	lsz8425 <lsz8425@mail.cd.hn.cn>
2002-05-14 12:55:39 +00:00
Brian Somers
d14cc5f96a If we receive a config request while Open, call TLD *before* decoding
the request as TLD may initialise fields that are set when decoding the
request.

MFC after:	1 week
2002-05-01 10:04:49 +00:00
Brian Somers
ff360cc91b Make the way FSM options are processed easier to read by using structures
instead of u_char *.

The changes are cosmetic except:

  RecvConfigAck() now displays the options that are being ACK'd
  Huge (bogus) options sent from the peer won't cause an infinite loop
  SendIdent and ReceiveIdent are displayed consistenlty with other FSM data
  LCP AUTHPROTO options that aren't understood are NAK'd, not REJ'd
2002-04-16 23:57:09 +00:00
Brian Somers
ad65ae3a27 Add a missing break 2002-03-30 12:47:29 +00:00
Brian Somers
1136c6ac64 Back out the previous fix to deal with kernels that don't support IPv6,
and implement a far more subtle and correct fix.

The reason behind the infinite loop was that ppp was trying to make up
initial IPv6 numbers and wasn't giving up when it failed unexpectedly to
assign the addresses it just fabricated to it's interface (thinking that
the reason was because another interface was using the same address).
It now attempts this up to 100 times before just failing and trying to
muddle along (in reality, this should never happen more than a couple
of times unless our random number generator doesn't work).

Also, when IPv6 is not available, don't even try to assign the IPv6
interface address in the first place...
2001-08-18 19:07:13 +00:00
Brian Somers
c5109a323c Run correctly on a machine built without AF_INET6 support 2001-08-18 13:04:52 +00:00
Brian Somers
30949fd4b5 o Add ipv6 support, abstracting most NCP addresses into opaque
structures (well, they're treated as opaque).

  It's now possible to manage IPv6 interface addresses and routing
  table entries and to filter IPV6 traffic whether encapsulated or
  not.

  IPV6CP support is crude for now, and hasn't been tested against
  any other implementations.

  RADIUS and IPv6 are independent of eachother for now.

  ppp.linkup/ppp.linkdown aren't currently used by IPV6CP

o Understand all protocols(5) in filter rules rather than only a select
  few.

o Allow a mask specification for the ``delete'' command.  It's now
  possible to specifically delete one of two conflicting routes.

o When creating and deleting proxy arp entries, do it for all IPv4
  interface addresses rather than doing it just for the ``current''
  peer address.

o When iface-alias isn't in effect, don't blow away manually (via ``iface
  add'') added interface addresses.

o When listening on a tcp server (diagnostic) socket, bind so that a
  tcp46 socket is created -- allowing both IPv4 and IPv6 connections.

o When displaying ICMP traffic, don't display the icmp type twice.
  When display traffic, display at least some information about unrecognised
  traffic.

o Bump version

Inspired after filtering work by: Makoto MATSUSHITA <matusita@jp.FreeBSD.org>
2001-08-14 16:05:52 +00:00
Brian Somers
6cf6ee7625 Add support for stateful MPPE (microsoft encryption) providing
encryption compatibility with Windows 2000.  Stateful encryption
uses less CPU but is bad on lossy transports.

The ``set mppe'' command has been expanded.  If it's used with any
arguments, ppp will insist on encryption, closing LCP if the other
end refuses.

Unfortunately, Microsoft have abused the CCP reset request so that
receiving a reset request does not result in a reset ack when using
MPPE...

Sponsored by:	Monzoon Networks AG and FreeBSD Services Limited
2001-06-18 15:00:22 +00:00
Brian Somers
65309e5cda Convert IIJ copyrights to BSD copyrights.
Approved by: Toshiharu OHNO <tohno@sirius.ocn.ne.jp>
2001-06-13 21:52:19 +00:00
Brian Somers
15c8dc2a03 If executing the stuff from ppp.linkdown results in a state change,
don't continue adjusting the ipcp state machine.

This allows ``down'' to work in ppp.linkdown - useful for a tunnel
setup.
2001-01-26 01:43:38 +00:00
Brian Somers
1038894eb0 Support link identification from rfc1570
Two new commands are available; ``ident'' and ``sendident''.
2000-07-19 02:10:35 +00:00
Brian Somers
e97b220c8c Don't oan about padding characters 2000-06-11 12:22:06 +00:00
Brian Somers
962a3cbc83 If the fsm header reports a length greater than the packet size,
drop the packet rather than just whinging about it in the log.
If the fsm header has a smaller length, continue to whinge.
2000-05-26 21:11:55 +00:00
Brian Somers
182c898a22 Add a bunch of `const's and fix a typo.
Submitted by: Rich Neswold <rneswold@MCS.Net>
1999-12-27 11:54:57 +00:00
Brian Somers
26af0ae966 Cosmetic: Make struct mbuf more like kernel mbufs. 1999-12-20 20:29:47 +00:00
Brian Somers
87c3786e7f Support PPPoE
Help (lots) from: julian, archie
Facilities from: ahebert@pubnix.net
1999-11-06 22:50:59 +00:00
Brian Somers
990a543f49 Mention the received/expected magic for dodgy ECHO LQRs. 1999-10-06 23:22:54 +00:00
Brian Somers
442f849547 o Split the two IPCP queues into three - one for FSM data
(LCP/CCP/IPCP), one for urgent IP traffic and one for
  everything else.
o Add the ``set urgent'' command for adjusting the list of
  urgent port numbers.  The default urgent ports are 21, 22,
  23, 513, 514, 543 and 544 (Ports 80 and 81 have been
  removed from the default priority list).
o Increase the buffered packet threshold from 20 to 30.
o Report the number of packets in the IP output queue and the
  list of urgent ports under ``show ipcp''.
1999-09-04 00:00:21 +00:00
Peter Wemm
97d92980a9 $Id$ -> $FreeBSD$ 1999-08-28 01:35:59 +00:00
Brian Somers
8a59beb7de If we receive an IPCP protocol reject, bring it down. 1999-08-10 08:42:20 +00:00
Brian Somers
411675bae3 o Alter the mbuf type as it's processed by different layers.
o Show more information about missing MP fragments in ``show mp''.
o Do away with mbuf_Log().  It was showing mbuf stats twice on
  receipt of LCP/CCP/IPCP packets.... ???!!?
o Pre-allocate a bit extra when creating LQR packets to avoid having
  to allocate another mbuf in mbuf_Prepend().
1999-06-02 15:59:09 +00:00
Brian Somers
6471628d59 Handle LCP echo reqs properly again (broken with the
layering changes).
1999-05-14 09:36:06 +00:00
Brian Somers
3377c28cd9 Deal with the fact that as we now mbuf_Read the fsm
header in fsm_Input() we often end up with a NULL mbuf.

Deal with a possible NULL mbuf being passed into
mbuf_Prepend().

Adjust some spacing to make things more consistent.
1999-05-09 20:02:29 +00:00
Brian Somers
5d9e610366 o Redesign the layering mechanism and make the aliasing code part of
the layering.

  We now ``stack'' layers as soon as we open the device (when we figure
  out what we're dealing with).  A static set of `dispatch' routines are
  also declared for dealing with incoming packets after they've been
  `pulled' up through the stacked layers.

  Physical devices are now assigned handlers based on the device type
  when they're opened.  For the moment there are three device types;
  ttys, execs and tcps.

o Increment version number to 2.2
o Make an entry in [uw]tmp for non-tty -direct invocations (after
  pap/chap authentication).
o Make throughput counters quad_t's
o Account for the absolute number of mbuf malloc()s and free()s in
  ``show mem''.
o ``show modem'' becomes ``show physical''.
1999-05-08 11:07:56 +00:00
Brian Somers
aad80d9f1b Ensure that the thing we're casting to struct ip
is aligned for non-i386 architectures.
1999-03-29 08:21:28 +00:00
Brian Somers
8a8d99276f Comment why we do a TLF when we get a ``Down'' event in state
``closing''.

Pointed out by: archie

Don't do a TLF when we get a ``Catastrphic Protocol Reject'' event
in state ``closed'' or ``stopped''.

Pointed out but not suggested by: archie

This makes no difference in the current implementation as
LcpLayerFinish() does nothing but log the event, but I disagree
in principle because it unbalances the TLF/TLS calls which
(IMHO) doesn't fit with the intentions of the RFC.

Maybe the RFC author had a reason for this.  It can only happen
in two circumstances:

- if LCP has already been negotiated then stopped or closed and we
  receive a protocol reject, then we must already have done a TLF.
  Why do one again and stay in the same state ?

- if LCP hasn't yet been started and we receive an unsolicted
  protocol reject, why should we TLF when we haven't done a TLS ?
1999-03-01 02:52:39 +00:00
Brian Somers
479508cf28 Allow control over the number of ConfigREQ & TermREQ attempts
that are made in each of the FSMs (LCP, CCP & IPCP) and the
number of REQs/Challenges for PAP/CHAP by accepting more arguments
in the ``set {c,ip,l}cpretry'' and ``set {ch,p}apretry'' commands.

Change the non-convergence thresholds to 3 times the number of configured
REQ tries (rather than the previous fixed ``10'').  We now notice
repeated NAKs and REJs rather than just REQs.

Don't suggest that CHAP 0x05 isn't supported when it's not configured.

Fix some bugs that expose themselves with smaller numbers of retries:
o Handle instantaneous disconnects (set device /dev/null) correctly
  by stopping all fsm timers in fsm2initial.
o Don't forget to uu_unlock() devices that are files but are not
  ttys (set device /dev/zero).

Fix a *HORRENDOUS* bug in RFC1661 (already fixed for an Open event in state
``Closed''):
  According to the state transition table, a RCR+ or RCR- received in
  the ``Stopped'' state are supposed to InitRestartCounter, SendConfigReq
  and SendConfig{Ack,Nak}.  However, in ``Stopped'', we haven't yet
  done a TLS (or the last thing we did is a TLF).  We must therefore
  do the TLS at this point !

  This was never noticed before because LCP and CCP used not use
  LayerStart() for anything interesting, and IPCP tends to go into
  Stopped then get a Down because of an LCP RTR rather than getting a
  RCR again.
1999-02-26 21:28:14 +00:00
Brian Somers
972a1bcf5d Initial RADIUS support (using libradius). See the man page for
details.  Compiling with -DNORADIUS (the default for `release')
removes support.

TODO: The functionality in libradius::rad_send_request() needs
      to be supplied as a set of routines so that ppp doesn't
      have to wait indefinitely for the radius server(s).  Instead,
      we need to get a descriptor back, select() on the descriptor,
      and ask libradius to service it when necessary.
      For now, ppp blocks SIGALRM while in rad_send_request(), so
      it misses PAP/CHAP retries & timeouts if they occur.

      Only PAP is functional.  When CHAP is attempted, libradius
      complains that no User-Password has been specified... rfc2138
      says that it *mustn't* be used for CHAP :-(

Sponsored by: Internet Business Solutions Ltd., Switzerland
1999-01-28 01:56:34 +00:00
Brian Somers
9e8ec64b6b Don't cast potentially unaligned addresses to pointers to
non-char types on non-i386 architectures.
On Alpha and Sparc we get a bus error if we do.
1998-09-04 18:26:00 +00:00
Brian Somers
68a0e17122 When we receive an LCP config REQ in Opened state,
do TLD *before* processing the config request as
TLD initialises the peers LCP values.

It's strange that an IRC isn't required here - but
I'll bow to the wisdom of the rfc.
1998-08-01 01:02:41 +00:00
Brian Somers
06337856e1 The CCP layer now behaves as follows:
o If we've denied and disabled all compression protocols, stay
  in ST_INITIAL and do an LCP protocol reject if we receive any
  CCP packets.
o If we've disabled all compression protocols, go to ST_STOPPED
  and wait for the other side to ask for something.
o If we've got anything enabled, start REQing as soon as the auth
  layer is up.
o If we're in multilink mode, than the link level CCP goes
  straight to ST_STOPPED irrespective of what's configured so that
  we never try to compress compressed stuff by default.
1998-06-30 23:04:17 +00:00
Brian Somers
3a2e4f621c o Fix remaining sizeof problems for 64 bit machines.
o Allow ``set ....'' when we have multiple links but aren't in
  multilink mode.
o Do a TLS when we receive a ``Open'' event in ``Closed'' state,
  despite the rfc state transition table.  This is clearly an
  error in the RFC as TLS cannot have yet been called (without
  TLF) in the ``Closed'' state.
  I've posted a message to comp.protocols.ppp for confirmation.
1998-06-27 23:48:54 +00:00
Brian Somers
897f9429f9 Add `ipcp'' as an optional argument to `open'', and make
open capable of re-negotiatiating the various layers.

It is now possible to change various link options and then
re-open the relevant layer, making the changes effective -
for example, switching off VJ compression or starting ECHO
LQRs on-the-fly.
1998-06-25 22:33:31 +00:00
Brian Somers
74d14b4cc9 Do an InitRestartCounter when we get a TerminateReq
in Opened state.....  I have no idea why this never
caused problems in the past - maybe the restart
counter was bogusly initialised somewhere else :-/
1998-06-20 01:55:28 +00:00
Brian Somers
09206a6f2a Create & use fsm2initial(), a function to bring a
state machine back to ST_INITIAL without going
through any unnecessary TLS/TLF pairs.
1998-06-20 00:19:42 +00:00
Brian Somers
a33b2ef772 Change some log levels. ALERTs are only logged when
something that can't happen happens or when everyone
needs to know.  ERRORs are only logged when something
unexpected happens.
1998-06-16 19:40:42 +00:00
Brian Somers
d93d3a9c32 o De-staticise things that don't need to be static.
o Bring the static ``ttystate'' into struct prompt so that
  the tilde context is per prompt and not global.
o Comment the remaining static variables so that it's
  clear why they're static.
o Add some XXX comments suggesting that our interface list
  and our hostname should be re-generated after a signal
  (say SIGUSR1) so that a machine with PCCARDs has a chance.
1998-06-15 19:06:58 +00:00
Brian Somers
d91d286164 MFMP: Make ppp multilink capable.
See the file README.changes, and re-read the man page.
1998-05-21 21:49:08 +00:00
Brian Somers
dd7e261079 Cosmetic: Make our external function names consistent. 1998-05-01 19:26:12 +00:00
Brian Somers
6f38457323 o Create a new `timer'' log level. This lets us `set
log debug'' without filling our filesystem/screen with
  junk that we don't really want to see.
o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming
  connections that aren't on STDIN_FILENO now.
o Allow return values from our FSM LayerUp functions.  If
  LayerUp() fails, the FSM does an immediate FsmDown() without
  calling the fsm_parent's Layer{Up,Down} functions.
o Clear the close-on-exec flag of file descriptor 3 when executing
  chat programs so that our documented ability to communicate with
  /dev/tty via that descriptor works.  Also document it as
  descriptor 3, not 4 :-O
o Allow a ``rm'' command as an alias for ``remove''.
o Fix the bind()/connect()/accept() calls made by the MP server.
o Create bundle_SendDatalink() and bundle_ReceiveDatalink().
  This allows `struct datalink's to flatten themselves, pass
  through a pipe (read: the eye of a needle !) and come alive
  at the other end.  The donator then fork()s & exec()s pppmpipe,
  ``passing'' the connection to another ppp instance.

   *** PPP NOW TALKS MULTILINK :-))) ***

Our link utilization is hideous, and lots of code needs
tidying still.  It's also probably riddled with bugs !
It's been tested against itself only, and has hung once,
so confidence isn't high....
1998-04-30 23:53:56 +00:00
Brian Somers
1fa665f5b3 o Add the link name to modem diagnostics.
o Create struct mpserver as part of struct mp.
  mpserver creates a unix-domain socket based on the
  peers auth name and endpoint discriminator.  If it
  already exists, ppp will ``pass the link'' over to
  the owner of the socket, joining it into the bundle
  of another ppp invocation, otherwise ppp waits for
  other invocations to pass it links through this
  socket.
  The final piece of code will be the code that flattens
  our datalink info and passes it down this channel
  (not yet implemented).
1998-04-28 01:25:46 +00:00
Brian Somers
d47dceb8ab o Remove LINK level logging.
o change the default link name to ``deflink'' rather
  than ``default''.
o Prepend the link name to CCP and LCP FSM diagnostics.
o Protect against 0 length options in CCP and IPCP REQ
  interpreters (already done for LCP).
o Allow optional context for the `show' command.
o Use MPs link when interpreting commands if the multilink
  mrru is configured rather than when multilink is active.
  This means that once we've ``set mrru xxx'', we then need
  to ``link deflink show ccp'' etc if we want to do link-level
  stuff (based on the command requiring optional or manditory
  context).
o Use the ifconfig'd interface address in `set enddisc {ip,mac}'
  if it's there, otherwise the configuration file value.
1998-04-24 19:15:48 +00:00
Brian Somers
673903ec42 o Initialise MP correctly depending on if we're the
first link in mp_Up().
o Bring MP and its CCP down when we enter phase TERMINATE,
  and ditch everything in the incoming packet queue.
o Enable MRRU negotiation.  Now, we can multilink
  mode, but only with one physical link.
o Close the link if the peer PROTO REJs PROTO_MP.
o Prepend our protocol before passing a packet to
  struct mp for fragmentation.
o Log info messages to DEBUG, not ERROR (oops).
o Align `show mp' output (again).
1998-04-23 21:50:13 +00:00
Brian Somers
fe3125a0c3 o Use __attribute__ (#ifdef __GNUC__) to type-check
LogPrintf() and prompt_Printf(), and fix the bits
  identified as being wrong as a result.
1998-04-19 23:09:03 +00:00