Commit Graph

58 Commits

Author SHA1 Message Date
Andrew Thompson
4076dd2309 Add basic support for USB Network Control Model (NCM) v1.0 to if_cdce.c.
http://www.usb.org/developers/devclass_docs/NCM10.zip

Submitted by:	Hans Petter Selasky
2009-09-28 07:53:55 +00:00
Alfred Perlstein
ec1201a2c9 - Fix false positive uipaq probe
Reported by: Alexander Motin <mav@freebsd.org>

Submitted by:	hps
2009-08-24 05:01:06 +00:00
Andrew Thompson
ed6d949afd - Make struct usb_xfer opaque so that drivers can not access the internals
- Reduce the number of headers needed for a usb driver, the common case is just   usb.h and usbdi.h
2009-06-23 02:19:59 +00:00
Andrew Thompson
759736470c Fix _USB2_* refernces in the header protection defines. 2009-06-15 01:09:19 +00:00
Andrew Thompson
ae60fdfba2 Rename usb pipes to endpoints as it better represents what they are, and struct
usb_pipe may be used for a different purpose later on.
2009-06-07 19:41:11 +00:00
Andrew Thompson
760bc48e7e s/usb2_/usb_/ on all C structs for the USB stack. 2009-05-28 17:36:36 +00:00
Andrew Thompson
51ec16035f MFp4 //depot/projects/usb@159897
Add new endpoint direction values for use with usb2_config

Submitted by:	Hans Petter Selasky
2009-04-05 18:20:13 +00:00
Andrew Thompson
d7e3163d8c Reintroduce r188878, provide compat typedefs for usb1. 2009-02-23 19:06:47 +00:00
Andrew Thompson
02ac645488 Move the new USB stack into its new home. 2009-02-23 18:31:00 +00:00
Andrew Thompson
3975e3a1ea Move usb to a graveyard location under sys/legacy/dev, it is intended that the
new USB2 stack will fully replace this for 8.0.

Remove kernel modules, a subsequent commit will update conf/files. Unhook
usbdevs from the build.
2009-02-23 18:16:17 +00:00
Nick Hibma
ab72d59941 Add a reset device command to ugen.c.
This is needed to make some devices work that require a firmware upload
and a USB reset afterwards.
2008-11-13 21:34:34 +00:00
Kevin Lo
8671b38b6c Add isochronous transfer support for USB 2.0
Obtained from:	NetBSD
2008-08-18 04:49:58 +00:00
Warner Losh
0d5a50d6bf Add definition for UIPROTO_MOUSE.
Approved by: re@
2007-06-30 02:40:21 +00:00
Warner Losh
34f7cf9af5 Remove usb_port.h from usb.h, except for one or two useful things that
don't belong there (these moved into usb.h).
2007-06-18 22:30:53 +00:00
Warner Losh
a73530728e Move PWR_* from usb_port.h to usb.h 2007-06-14 16:12:04 +00:00
Warner Losh
058cc61a3e Move malloc definitions to usb.h.
Also, remove usb_malloc_type: it was unused.
Remove METHODS_NONE: it was unused.
Move include of opt_usb.h from usb_port.h to usb.h, since usb_port.h is
going away (there will be a usb_compat.h for out-of-tree drivers that want it).
2007-06-14 15:09:21 +00:00
Warner Losh
63ba0d2d76 Remove more __OtherBSD__ ifdefs that don't make sense, and haven't for
some time.
2007-06-13 05:45:48 +00:00
Christian Brueffer
578e607926 Remove compat ifdefs for version < 500014 from the rest of the USB files.
Approved by:	rwatson (mentor)
MFC after:	1 week
2007-06-07 09:29:37 +00:00
Warner Losh
56635f6bd3 s/Static/static/g
s/device_ptr_t/device_t/g

No md5 changes in the .o's

# Note to the md5 tracking club: $FreeBSD$ changes md5 after every commit
# so you need to checkout -kk to get $FreeBSD$ instead of the actual value
# of the keyword.
2006-09-06 23:44:25 +00:00
Maxime Henrion
0cb0bc8808 Add support for Xbox 360 gamepads. They are HID-capable devices, but
lack a report descriptor and don't use the standard interface class.
This patch works around these deficiencies so that the uhid(4) driver
can recognize and use those broken devices.

PR:		usb/90141
Submitted by:	Ed Schouten <ed@fxq.nl> (with minor mods from me)
MFC after:	1 week
2005-12-31 04:22:34 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Josef Karthauser
8ecdcb3ff3 Packed structures are defined differently in older gcc's, like the one
currently in -stable.  Put the exception into usb.h instead of having it
hard coded in the sound code.
2002-11-06 21:37:21 +00:00
Josef Karthauser
0fbf938869 MFNetBSD: Increasre the reset recovery time. (rev 1.69) 2002-09-27 19:55:37 +00:00
Josef Karthauser
33e8332333 MFNetBSD: Update class codes. (rev 1.68) 2002-09-27 19:52:42 +00:00
Josef Karthauser
8bca50af6b MFNetBSD: Add Bluetooth related classes etc. (rev 1.67) 2002-09-27 19:45:37 +00:00
Josef Karthauser
fef80c2cba MFNetBSD: revision 1.66
Get rid of trailing white space.
2002-09-27 19:42:29 +00:00
Alfred Perlstein
ebc82cbbf0 s/__attribute__((__packed__))/__packed/g 2002-09-23 06:25:08 +00:00
Josef Karthauser
dae0af0c83 Revert part of the last commit. A couple of defines were removed
by NetBSD because they don't use them (they've no usbd), but we do.
2002-02-26 10:00:32 +00:00
Josef Karthauser
648b06a6ed Merge from NetBSD:
usb.h (rev 1.61):

    date: 2002/01/01 14:23:37;  author: augustss;
    Add a missing subclass definition.

usb.h (rev 1.63) and usb_port.h (rev 1.52):

    date: 2002/02/25 00:46:37;  author: augustss;
    Some portability improvement.
    Add define for usb.h version.
2002-02-26 01:15:08 +00:00
Alfred Perlstein
5bcd0580d7 Prefix structure members to protect them against clashes with eg.
c++ keywords.

This keeps us in sync with NetBSD because they actually committed
my delta first.

Ok'd by: lennard
2002-02-20 20:47:21 +00:00
Josef Karthauser
4d0649fbad Merge from NetBSD:
Pave the way for USB2, by replacing 'lowspeed' with 'speed', so
that it can take the values USB_SPEED_LOW, USB_SPEED_FULL or in
time USB_SPEED_HIGH.
2002-02-16 00:51:26 +00:00
Josef Karthauser
a07e9d4af3 Merge from NetBSD.
uhub.c:     revision 1.37
    usb.4:      revision 1.30
    usb.c:      revision 1.38
    usb.h:      revision 1.40
    usb_port.h: revision 1.21
    usb_subr.c: revision 1.65
    usbdi.h:    revision 1.40

Split the attach/detach events up into device, driver and controller
attach and detach events.

The commit message from NetBSD was:
        date: 2000/02/02 07:34:00;  author: augustss;  state: Exp;
        Change the USB event mechanism to include more information
        about devices and drivers.  Partly from FreeBSD.

Also rework usbd to take these new event types into account.
2002-01-28 01:03:19 +00:00
Josef Karthauser
2ba633961e Sync usb.h with NetBSD, apart from usb_device_info.speed, which
requires logic changes.  For now leave it as usb_device_info.lowspeed.
It will get addressed when the usb.c code is sync'd.
2002-01-02 20:16:53 +00:00
Josef Karthauser
0b4a107145 Revert part of the last commit. UIPROTO_MASS_BBB was renamed to
UIPROTO_MASS_BULK _after_ the previous change was made in NetBSD.
2002-01-02 18:36:46 +00:00
Josef Karthauser
5440b9801c Sync with NetBSD:
date: 2000/02/29 21:37:01;  author: augustss;  state: Exp;
	Distinguish between device and interface classes.
	(I finally found a document that said that they were different.)
2002-01-02 18:28:45 +00:00
Nick Hibma
5bfc478e32 Don't check for ohci/uhci to be loaded, check for the usb module. 2000-09-02 10:17:58 +00:00
Nick Hibma
028d28adb8 From NetBSD:
Make it possible to move a device to its unconfigured state by
using config #0.

Add some comments.

Change error reporting in port reset function.

usbd_devinfo_vp(): search the know devs array also if the device doesn't
return product description (e.g. Kye's Genius NetScroll mouse returns
vendor, but not product); the strings returned by device are still
preferred to those in the array, though
2000-08-13 18:39:24 +00:00
Nick Hibma
4b268ed3a9 Sync with NetBSD:
Make the behaviour more similar to what the Microsoft uhub driver
does.
2000-05-14 19:39:10 +00:00
Nick Hibma
23f027a0bc Sync with NetBSD:
Add USB_SET_REPORT ioctl.
Add FIOASYNC, TIOCSPGRP ioctl.
Change some debugging output
2000-05-14 17:43:59 +00:00
Nick Hibma
128aa3af3c Change Lennart's e-mail address. 2000-05-14 16:43:10 +00:00
Jonathan M. Bresler
0fe00f48d0 if USB support is not compiled into the kernel,
and has not been loaded via a kldload,
	running usbd(8) will autoload the "usb.ko" kld.

	thanks to Peter Wemm for enlightening me on the
	differences between kldfind(2) and modfind(2).
2000-04-02 06:28:40 +00:00
Nick Hibma
bc51947397 The completely rewritten USB Mass Storage driver. It supports the following
devices:

Tested:
   Zip 100 USB drive
   Y-E Data USB floppy drive

Untested: (let me know whether or not it works!)
   TEAC USB floppy drive
   Zip 250 USB drive
2000-03-18 17:33:41 +00:00
Peter Wemm
664a31e496 Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL"
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot).  This is consistant with the other
BSD's who made this change quite some time ago.  More commits to come.
1999-12-29 04:46:21 +00:00
Nick Hibma
961c5779bc Add devnames, the device names the drivers attached to for usbd.
0 -> NULL changes.
Add realloc (for OpenBSD)
1999-11-28 20:55:22 +00:00
Nick Hibma
937791192a Addition of new fields to the usb_devinfo struct to enable the new
and shiny usbd daemon to handle events.

usb_port.h:
- Add a macro to retrieve the unit number from a USBBASEDEVICE

usb.h, usb_subr.c:
- Add fields to the device_info struct.

usb_subr.c:
- Fill in the new fields.
- Remove the notification of the event up a bit to make sure all the
  information is still available to fill the usb_devinfo struct.

This requires recompilation of usbdevs (src/usr.sbin/usbdevs) and the
ezdownload/ezupload (ports/misc/ezload) utilities in any case.
1999-11-21 17:30:42 +00:00
Nick Hibma
3241be7550 Synchronisation with NetBSD as of 1999/11/16:
Cleaning up the code:
- Declare many functions static
- Change variable names to make them more self explanatory
- Change usbd_request_handle -> usbd_xfer_handle
- Syntactical changes
- Remove some unused code
- Other KNF changes

Interrupt context handling
- Change delay to usbd_delay_ms were possible (takes polling mode into
  account)
- Change detection mechanism for interrupt context

Add support for pre-allocation DMA-able memory by device driver

Add preliminary support for isochronous to the UHCI driver (not for OHCI
yet).

usb.c, uhci.c, ohci.c
- Initial attempt at detachable USB host controllers
- Handle the use_polling flag with a lttle more care and only set it if
we are cold booting.

usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c
- Make sure an aborted pipe is marked as not running.
- Start queued request in the right order.
- Insert some more DIAGNOSTIC sanity checks.
- Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN.

usb.c, usb_subr.c
- Add an event mechanism so that a userland process can watch devices
  come and go.

ohci.c
- Handle the case when a USB transfer is so long that it crosses two
  page (4K) boundaries.  OHCI cannot do that with a single TD so we make
  a chain.

ulpt.c
- Use a bigger buffer when transferring data.
- Pre-allocate the DMA buffer.  This makes the driver slightly more
  efficient.
- Comment out the GET_DEVICE_ID code, because for some unknown reason it
  causes printing to fail sometimes.

usb.h
- Add a macro to extract the isoc type.
- Add a macro to check whether the routine has been entered after splusb
  and if not, complain.

usbdi.c
- Fix a glitch in dequeueing and aborting requests on interrupt pipes.
- Add a flag in the request to determine if the data copying is done by
  the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
Nick Hibma
8c895d718b Major synchronisation with the NetBSD USB stack:
- Some cleanup and improvements in the uhci and ohci drivers
- Support for plugging and unplugging devices improved
- Now available is bulk transport over OHCI controllers
- Resume and suspend have been temporarily been disabled again.  Proper
  support for it is available in the uhci.c and ohci.c files but I have
  not yet spent the brain cycles to use it.
- OpenBSD now uses the USB stack as well
- Add FreeBSD tags
1999-10-07 19:26:38 +00:00
Nick Hibma
2677b5a4db Add the semi-official Bulk protocol id 'P' 1999-07-03 22:19:41 +00:00
Nick Hibma
0bf8525354 Replace UE_GET_IN with UE_GET_DIR 1999-05-03 23:18:11 +00:00
Nick Hibma
272bc74e12 Add defines for Mass Storage Bulk-Only and COmmun. Class devices. 1999-04-20 21:25:29 +00:00