Commit Graph

28 Commits

Author SHA1 Message Date
Alexander Motin
17160457b4 Report random flash storage as non-rotating to GEOM_DISK.
While doing it, introduce respective constants in geom_disk.h.

MFC after:	1 week
2017-01-12 08:53:10 +00:00
Kenneth D. Merry
a02e196edd Switch geom_disk over to using a pool mutex.
The GEOM disk d_mtx is only acquired on disk creation and destruction.
It is a good candidate for replacement with a pool mutex.  This eliminates
the mutex initialization and teardown and the mutex and name variables
themselves from struct disk.

sys/geom/geom_disk.h:
	Take d_mtx and d_mtx_name out of struct disk.

sys/geom/geom_disk.c:
	Use mtx_pool_lock() and mtx_pool_unlock() to guard the disk
	initialization state instead of a dedicated mutex.

	This allows removing the initialization and destruction of
	d_mtx.

sys/sys/param.h:
	Bump __FreeBSD_version to 1100119 for the change to struct disk.

Suggested by:	jhb
Sponsored by:	Spectra Logic
Approved by:	re (gjb)
2016-06-23 20:05:59 +00:00
Kenneth D. Merry
1ff824e786 Fix a bug that caused da(4) instances to hang around after the underlying
device is gone.

The problem was that when disk_gone() is called, if the GEOM disk
creation process has not yet happened, the withering process
couldn't start.

We didn't record any state in the GEOM disk code, and so the d_gone()
callback to the da(4) driver never happened.

The solution is to track the state of the creation process, and
initiate the withering process from g_disk_create() if the disk is
being created.

This change does add fields to struct disk, and so I have bumped
DISK_VERSION.

geom_disk.c:	Track where we are in the disk creation process,
		and check to see whether our underlying disk has
		gone away or not.

		In disk_gone(), set a new d_goneflag variable that
		g_disk_create() can check to see if it needs to
		clean up the disk instance.

geom_disk.h:    Add a mutex to struct disk (for internal use) disk
		init level, and a gone flag.

		Bump DISK_VERSION because the size of struct disk has
		changed and fields have been added at the beginning.

Sponsored by:	Spectra Logic
Approved by:	re (marius)
2016-06-21 20:18:19 +00:00
Kenneth D. Merry
9a6844d55f Add support for managing Shingled Magnetic Recording (SMR) drives.
This change includes support for SCSI SMR drives (which conform to the
Zoned Block Commands or ZBC spec) and ATA SMR drives (which conform to
the Zoned ATA Command Set or ZAC spec) behind SAS expanders.

This includes full management support through the GEOM BIO interface, and
through a new userland utility, zonectl(8), and through camcontrol(8).

This is now ready for filesystems to use to detect and manage zoned drives.
(There is no work in progress that I know of to use this for ZFS or UFS, if
anyone is interested, let me know and I may have some suggestions.)

Also, improve ATA command passthrough and dispatch support, both via ATA
and ATA passthrough over SCSI.

Also, add support to camcontrol(8) for the ATA Extended Power Conditions
feature set.  You can now manage ATA device power states, and set various
idle time thresholds for a drive to enter lower power states.

Note that this change cannot be MFCed in full, because it depends on
changes to the struct bio API that break compatilibity.  In order to
avoid breaking the stable API, only changes that don't touch or depend on
the struct bio changes can be merged.  For example, the camcontrol(8)
changes don't depend on the new bio API, but zonectl(8) and the probe
changes to the da(4) and ada(4) drivers do depend on it.

Also note that the SMR changes have not yet been tested with an actual
SCSI ZBC device, or a SCSI to ATA translation layer (SAT) that supports
ZBC to ZAC translation.  I have not yet gotten a suitable drive or SAT
layer, so any testing help would be appreciated.  These changes have been
tested with Seagate Host Aware SATA drives attached to both SAS and SATA
controllers.  Also, I do not have any SATA Host Managed devices, and I
suspect that it may take additional (hopefully minor) changes to support
them.

Thanks to Seagate for supplying the test hardware and answering questions.

sbin/camcontrol/Makefile:
	Add epc.c and zone.c.

sbin/camcontrol/camcontrol.8:
	Document the zone and epc subcommands.

sbin/camcontrol/camcontrol.c:
	Add the zone and epc subcommands.

	Add auxiliary register support to build_ata_cmd().  Make sure to
	set the CAM_ATAIO_NEEDRESULT, CAM_ATAIO_DMA, and CAM_ATAIO_FPDMA
	flags as appropriate for ATA commands.

	Add a new get_ata_status() function to parse ATA result from SCSI
	sense descriptors (for ATA passthrough over SCSI) and ATA I/O
	requests.

sbin/camcontrol/camcontrol.h:
	Update the build_ata_cmd() prototype

	Add get_ata_status(), zone(), and epc().

sbin/camcontrol/epc.c:
	Support for ATA Extended Power Conditions features.  This includes
	support for all features documented in the ACS-4 Revision 12
	specification from t13.org (dated February 18, 2016).

	The EPC feature set allows putting a drive into a power power mode
	immediately, or setting timeouts so that the drive will
	automatically enter progressively lower power states after various
	idle times.

sbin/camcontrol/fwdownload.c:
	Update the firmware download code for the new build_ata_cmd()
	arguments.

sbin/camcontrol/zone.c:
	Implement support for Shingled Magnetic Recording (SMR) drives
	via SCSI Zoned Block Commands (ZBC) and ATA Zoned Device ATA
	Command Set (ZAC).

	These specs were developed in concert, and are functionally
	identical.  The primary differences are due to SCSI and ATA
	differences.  (SCSI is big endian, ATA is little endian, for
	example.)

	This includes support for all commands defined in the ZBC and
	ZAC specs.

sys/cam/ata/ata_all.c:
	Decode a number of additional ATA command names in ata_op_string().

	Add a new CCB building function, ata_read_log().

	Add ata_zac_mgmt_in() and ata_zac_mgmt_out() CCB building
	functions.  These support both DMA and NCQ encapsulation.

sys/cam/ata/ata_all.h:
	Add prototypes for ata_read_log(), ata_zac_mgmt_out(), and
	ata_zac_mgmt_in().

sys/cam/ata/ata_da.c:
	Revamp the ada(4) driver to support zoned devices.

	Add four new probe states to gather information needed for zone
	support.

	Add a new adasetflags() function to avoid duplication of large
	blocks of flag setting between the async handler and register
	functions.

	Add new sysctl variables that describe zone support and paramters.

	Add support for the new BIO_ZONE bio, and all of its subcommands:
	DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
	DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.

sys/cam/scsi/scsi_all.c:
	Add command descriptions for the ZBC IN/OUT commands.

	Add descriptions for ZBC Host Managed devices.

	Add a new function, scsi_ata_pass() to do ATA passthrough over
	SCSI.  This will eventually replace scsi_ata_pass_16() -- it
	can create the 12, 16, and 32-byte variants of the ATA
	PASS-THROUGH command, and supports setting all of the
	registers defined as of SAT-4, Revision 5 (March 11, 2016).

	Change scsi_ata_identify() to use scsi_ata_pass() instead of
	scsi_ata_pass_16().

	Add a new scsi_ata_read_log() function to facilitate reading
	ATA logs via SCSI.

sys/cam/scsi/scsi_all.h:
	Add the new ATA PASS-THROUGH(32) command CDB.  Add extended and
	variable CDB opcodes.

	Add Zoned Block Device Characteristics VPD page.

	Add ATA Return SCSI sense descriptor.

	Add prototypes for scsi_ata_read_log() and scsi_ata_pass().

sys/cam/scsi/scsi_da.c:
	Revamp the da(4) driver to support zoned devices.

	Add five new probe states, four of which are needed for ATA
	devices.

	Add five new sysctl variables that describe zone support and
	parameters.

	The da(4) driver supports SCSI ZBC devices, as well as ATA ZAC
	devices when they are attached via a SCSI to ATA Translation (SAT)
	layer.  Since ZBC -> ZAC translation is a new feature in the T10
	SAT-4 spec, most SATA drives will be supported via ATA commands
	sent via the SCSI ATA PASS-THROUGH command.  The da(4) driver will
	prefer the ZBC interface, if it is available, for performance
	reasons, but will use the ATA PASS-THROUGH interface to the ZAC
	command set if the SAT layer doesn't support translation yet.
	As I mentioned above, ZBC command support is untested.

	Add support for the new BIO_ZONE bio, and all of its subcommands:
	DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
	DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.

	Add scsi_zbc_in() and scsi_zbc_out() CCB building functions.

	Add scsi_ata_zac_mgmt_out() and scsi_ata_zac_mgmt_in() CCB/CDB
	building functions.  Note that these have return values, unlike
	almost all other CCB building functions in CAM.  The reason is
	that they can fail, depending upon the particular combination
	of input parameters.  The primary failure case is if the user
	wants NCQ, but fails to specify additional CDB storage.  NCQ
	requires using the 32-byte version of the SCSI ATA PASS-THROUGH
	command, and the current CAM CDB size is 16 bytes.

sys/cam/scsi/scsi_da.h:
	Add ZBC IN and ZBC OUT CDBs and opcodes.

	Add SCSI Report Zones data structures.

	Add scsi_zbc_in(), scsi_zbc_out(), scsi_ata_zac_mgmt_out(), and
	scsi_ata_zac_mgmt_in() prototypes.

sys/dev/ahci/ahci.c:
	Fix SEND / RECEIVE FPDMA QUEUED in the ahci(4) driver.

	ahci_setup_fis() previously set the top bits of the sector count
	register in the FIS to 0 for FPDMA commands.  This is okay for
	read and write, because the PRIO field is in the only thing in
	those bits, and we don't implement that further up the stack.

	But, for SEND and RECEIVE FPDMA QUEUED, the subcommand is in that
	byte, so it needs to be transmitted to the drive.

	In ahci_setup_fis(), always set the the top 8 bits of the
	sector count register.  We need it in both the standard
	and NCQ / FPDMA cases.

sys/geom/eli/g_eli.c:
	Pass BIO_ZONE commands through the GELI class.

sys/geom/geom.h:
	Add g_io_zonecmd() prototype.

sys/geom/geom_dev.c:
	Add new DIOCZONECMD ioctl, which allows sending zone commands to
	disks.

sys/geom/geom_disk.c:
	Add support for BIO_ZONE commands.

sys/geom/geom_disk.h:
	Add a new flag, DISKFLAG_CANZONE, that indicates that a given
	GEOM disk client can handle BIO_ZONE commands.

sys/geom/geom_io.c:
	Add a new function, g_io_zonecmd(), that handles execution of
	BIO_ZONE commands.

	Add permissions check for BIO_ZONE commands.

	Add command decoding for BIO_ZONE commands.

sys/geom/geom_subr.c:
	Add DDB command decoding for BIO_ZONE commands.

sys/kern/subr_devstat.c:
	Record statistics for REPORT ZONES commands.  Note that the
	number of bytes transferred for REPORT ZONES won't quite match
	what is received from the harware.  This is because we're
	necessarily counting bytes coming from the da(4) / ada(4) drivers,
	which are using the disk_zone.h interface to communicate up
	the stack.  The structure sizes it uses are slightly different
	than the SCSI and ATA structure sizes.

sys/sys/ata.h:
	Add many bit and structure definitions for ZAC, NCQ, and EPC
	command support.

sys/sys/bio.h:
	Convert the bio_cmd field to a straight enumeration.  This will
	yield more space for additional commands in the future.  After
	change r297955 and other related changes, this is now possible.
	Converting to an enumeration will also prevent use as a bitmask
	in the future.

sys/sys/disk.h:
	Define the DIOCZONECMD ioctl.

sys/sys/disk_zone.h:
	Add a new API for managing zoned disks.  This is very close to
	the SCSI ZBC and ATA ZAC standards, but uses integers in native
	byte order instead of big endian (SCSI) or little endian (ATA)
	byte arrays.

	This is intended to offer to the complete feature set of the ZBC
	and ZAC disk management without requiring the application developer
	to include SCSI or ATA headers.  We also use one set of headers
	for ioctl consumers and kernel bio-level consumers.

sys/sys/param.h:
	Bump __FreeBSD_version for sys/bio.h command changes, and inclusion
	of SMR support.

usr.sbin/Makefile:
	Add the zonectl utility.

usr.sbin/diskinfo/diskinfo.c
	Add disk zoning capability to the 'diskinfo -v' output.

usr.sbin/zonectl/Makefile:
	Add zonectl makefile.

usr.sbin/zonectl/zonectl.8
	zonectl(8) man page.

usr.sbin/zonectl/zonectl.c
	The zonectl(8) utility.  This allows managing SCSI or ATA zoned
	disks via the disk_zone.h API.  You can report zones, reset write
	pointers, get parameters, etc.

Sponsored by:	Spectra Logic
Differential Revision:	https://reviews.freebsd.org/D6147
Reviewed by:	wblock (documentation)
2016-05-19 14:08:36 +00:00
John Baldwin
d6d78db57f Reject attempts to attack a disk device that has the old NEEDSGIANT
flag set.

Reviewed by:	mav
2013-10-25 19:19:12 +00:00
Steven Hartland
c28078e903 Improve ZFS N-way mirror read performance by using load and locality
information.

The existing algorithm selects a preferred leaf vdev based on offset of the zio
request modulo the number of members in the mirror. It assumes the devices are
of equal performance and that spreading the requests randomly over both drives
will be sufficient to saturate them. In practice this results in the leaf vdevs
being under utilized.

The new algorithm takes into the following additional factors:
* Load of the vdevs (number outstanding I/O requests)
* The locality of last queued I/O vs the new I/O request.

Within the locality calculation additional knowledge about the underlying vdev
is considered such as; is the device backing the vdev a rotating media device.

This results in performance increases across the board as well as significant
increases for predominantly streaming loads and for configurations which don't
have evenly performing devices.

The following are results from a setup with 3 Way Mirror with 2 x HD's and
1 x SSD from a basic test running multiple parrallel dd's.

With pre-fetch disabled (vfs.zfs.prefetch_disable=1):

== Stripe Balanced (default) ==
Read 15360MB using bs: 1048576, readers: 3, took 161 seconds @ 95 MB/s
== Load Balanced (zfslinux) ==
Read 15360MB using bs: 1048576, readers: 3, took 297 seconds @ 51 MB/s
== Load Balanced (locality freebsd) ==
Read 15360MB using bs: 1048576, readers: 3, took 54 seconds @ 284 MB/s

With pre-fetch enabled (vfs.zfs.prefetch_disable=0):

== Stripe Balanced (default) ==
Read 15360MB using bs: 1048576, readers: 3, took 91 seconds @ 168 MB/s
== Load Balanced (zfslinux) ==
Read 15360MB using bs: 1048576, readers: 3, took 108 seconds @ 142 MB/s
== Load Balanced (locality freebsd) ==
Read 15360MB using bs: 1048576, readers: 3, took 48 seconds @ 320 MB/s

In addition to the performance changes the code was also restructured, with
the help of Justin Gibbs, to provide a more logical flow which also ensures
vdevs loads are only calculated from the set of valid candidates.

The following additional sysctls where added to allow the administrator
to tune the behaviour of the load algorithm:
* vfs.zfs.vdev.mirror.rotating_inc
* vfs.zfs.vdev.mirror.rotating_seek_inc
* vfs.zfs.vdev.mirror.rotating_seek_offset
* vfs.zfs.vdev.mirror.non_rotating_inc
* vfs.zfs.vdev.mirror.non_rotating_seek_inc

These changes where based on work started by the zfsonlinux developers:
https://github.com/zfsonlinux/zfs/pull/1487

Reviewed by:	gibbs, mav, will
MFC after:	2 weeks
Sponsored by:	Multiplay
2013-10-23 09:54:58 +00:00
Alexander Motin
1a29adad30 Remove Giant-locked drivers support (DISKFLAG_NEEDSGIANT flag) from disk(9).
Since at least FreeBSD 7 we had only four of them in the base tree, and
in head branch, thanks to jhb@, we have no any for more then a year.
2013-10-22 10:21:20 +00:00
Alexander Motin
40ea77a036 Merge GEOM direct dispatch changes from the projects/camlock branch.
When safety requirements are met, it allows to avoid passing I/O requests
to GEOM g_up/g_down thread, executing them directly in the caller context.
That allows to avoid CPU bottlenecks in g_up/g_down threads, plus avoid
several context switches per I/O.

The defined now safety requirements are:
 - caller should not hold any locks and should be reenterable;
 - callee should not depend on GEOM dual-threaded concurency semantics;
 - on the way down, if request is unmapped while callee doesn't support it,
   the context should be sleepable;
 - kernel thread stack usage should be below 50%.

To keep compatibility with GEOM classes not meeting above requirements
new provider and consumer flags added:
 - G_CF_DIRECT_SEND -- consumer code meets caller requirements (request);
 - G_CF_DIRECT_RECEIVE -- consumer code meets callee requirements (done);
 - G_PF_DIRECT_SEND -- provider code meets caller requirements (done);
 - G_PF_DIRECT_RECEIVE -- provider code meets callee requirements (request).
Capable GEOM class can set them, allowing direct dispatch in cases where
it is safe.  If any of requirements are not met, request is queued to
g_up or g_down thread same as before.

Such GEOM classes were reviewed and updated to support direct dispatch:
CONCAT, DEV, DISK, GATE, MD, MIRROR, MULTIPATH, NOP, PART, RAID, STRIPE,
VFS, ZERO, ZFS::VDEV, ZFS::ZVOL, all classes based on g_slice KPI (LABEL,
MAP, FLASHMAP, etc).

To declare direct completion capability disk(9) KPI got new flag equivalent
to G_PF_DIRECT_SEND -- DISKFLAG_DIRECT_COMPLETION.  da(4) and ada(4) disk
drivers got it set now thanks to earlier CAM locking work.

This change more then twice increases peak block storage performance on
systems with manu CPUs, together with earlier CAM locking changes reaching
more then 1 million IOPS (512 byte raw reads from 16 SATA SSDs on 4 HBAs to
256 user-level threads).

Sponsored by:	iXsystems, Inc.
MFC after:	2 months
2013-10-22 08:22:19 +00:00
Steven Hartland
8383a92e5b Bump disk(9) ABI version to signify the addition of d_delmaxsize by r249940.
Ensure that d_delmaxsize is always set, removing init to 0 which could cause
future issues if use cases change.

Allow kern.cam.da.X.delete_max (which maps to d_delmaxsize) to be increased
up to the calculated max after being reduced.

MFC after:	1 day
X-MFC-With: r249940
2013-07-03 23:46:30 +00:00
Steven Hartland
9fe9ba5bef Teach GEOM and CAM about the difference between the max "size" of r/w and delete
requests.

sys/geom/geom_disk.h:
        - Added d_delmaxsize which represents the maximum size of individual
          device delete requests in bytes. This can be used by devices to
          inform geom of their size limitations regarding delete operations
          which are generally different from the read / write limits as data
          is not usually transferred from the host to physical device.

sys/geom/geom_disk.c:
        - Use new d_delmaxsize to calculate the size of chunks passed through to
          the underlying strategy during deletes instead of using read / write
          optimised values. This defaults to d_maxsize if unset (0).

        - Moved d_maxsize default up so it can be used to default d_delmaxsize

sys/cam/ata/ata_da.c:
        - Added d_delmaxsize calculations for TRIM and CFA

sys/cam/scsi/scsi_da.c:
        - Added re-calculation of d_delmaxsize whenever delete_method is set.

        - Added kern.cam.da.X.delete_max sysctl which allows the max size for
          delete requests to be limited. This is useful in preventing timeouts
          on devices who's delete methods are slow. It should be noted that
          this limit is reset then the device delete method is changed and
          that it can only be lowered not increased from the device max.

Reviewed by:	mav
Approved by:	pjd (mentor)
2013-04-26 16:22:54 +00:00
Ivan Voras
252c094e53 Introduce a symbol for the GEOM class name instead of using the ad-hoc string
constant.
2013-04-15 15:55:40 +00:00
Konstantin Belousov
f8c19ba466 A flag for the geom disk driver to indicate that it accepts the
unmapped i/o requests.

Sponsored by:	The FreeBSD Foundation
Tested by:	pho
2013-03-19 14:49:15 +00:00
Edward Tomasz Napierala
1af2d09b49 Fix locking problem in disk_resize(); previously it would run without
topology lock, resulting in assertion when running with DIAGNOSTIC.

Reviewed by:	mav (earlier version)
2012-10-29 17:52:43 +00:00
Alexander Motin
3631c6382f Implement media change notification for DA and CD removable media devices.
It includes three parts:
 1) Modifications to CAM to detect media media changes and report them to
disk(9) layer. For modern SATA (and potentially UAS) devices it utilizes
Asynchronous Notification mechanism to receive events from hardware.
Active polling with TEST UNIT READY commands with 3 seconds period is used
for incapable hardware. After that both CD and DA drivers work the same way,
detecting two conditions: "NOT READY: Medium not present" after medium was
detected previously, and "UNIT ATTENTION: Not ready to ready change, medium
may have changed". First one reported to disk(9) as media removal, second
as media insert/change. To reliably receive second event new
AC_UNIT_ATTENTION async added to make UAs broadcasted to all periphs by
generic error handling code in cam_periph_error().
 2) Modifications to GEOM core to handle media remove and change events.
Media removal handled by spoiling all consumers attached to the provider.
Media change event also schedules provider retaste after spoiling to probe
new media. New flag G_CF_ORPHAN was added to consumers to reflect that
consumer is in process of destruction. It allows retaste to create new
geom instance of the same class, while previous one is still dying.
 3) Modifications to some GEOM classes: DEV -- to report media change
events to devd; VFS -- to handle spoiling same as orphan to prevent
accessing replaced media. PART class already handles spoiling alike to
orphan.

Reviewed by:	silence on geom@ and scsi@
Tested by:	avg
Sponsored by:	iXsystems, Inc. / PC-BSD
MFC after:	2 months
2012-07-29 11:51:48 +00:00
Edward Tomasz Napierala
bc97ce36f7 Add disk_resize(), to make it possible for the disk drivers such as da(4)
to notify GEOM about LUN size change.

Reviewed by:	mav (earlier version)
Sponsored by:	FreeBSD Foundation
2012-07-07 21:28:31 +00:00
Kenneth D. Merry
c3fb2891f0 Fix a bug which causes a panic in daopen(). The panic is caused by
a da(4) instance going away while GEOM is still probing it.

In this case, the GEOM disk class instance has been created by
disk_create(), and the taste of the disk is queued in the GEOM
event queue.

While that event is queued, the da(4) instance goes away.  When the
open call comes into the da(4) driver, it dereferences the freed
(but non-NULL) peripheral pointer provided by GEOM, which results
in a panic.

The solution is to add a callback to the GEOM disk code that is
called when all of its resources are cleaned up.  This is
implemented inside GEOM by adding an optional callback that is
called when all consumers have detached from a provider, and the
provider is about to be deleted.

scsi_cd.c,
scsi_da.c:	In the register routine for the cd(4) and da(4)
		routines, acquire a reference to the CAM peripheral
		instance just before we call disk_create().

		Use the new GEOM disk d_gone() callback to register
		a callback (dadiskgonecb()/cddiskgonecb()) that
		decrements the peripheral reference count once GEOM
		has finished cleaning up its resources.

		In the cd(4) driver, clean up open and close
		behavior slightly.  GEOM makes sure we only get one
		open() and one close call, so there is no need to
		set an open flag and decrement the reference count
		if we are not the first open.

		In the cd(4) driver, use cam_periph_release_locked()
		in a couple of error scenarios to avoid extra mutex
		calls.

geom.h:		Add a new, optional, providergone callback that
		is called when a provider is about to be deleted.

geom_disk.h:	Add a new d_gone() callback to the GEOM disk
		interface.

		Bump the DISK_VERSION to version 2.  This probably
		should have been done after a couple of previous
		changes, especially the addition of the d_getattr()
		callback.

geom_disk.c:	Add a providergone callback for the disk class,
		g_disk_providergone(), that calls the user's
		d_gone() callback if it exists.

		Bump the DISK_VERSION to 2.

geom_subr.c:	In g_destroy_provider(), call the providergone
		callback if it has been provided.

		In g_new_geomf(), propagate the class's
		providergone callback to the new geom instance.

blkfront.c:	Callers of disk_create() are supposed to pass in
		DISK_VERSION, not an explicit disk API version
		number.  Update the blkfront driver to do that.

disk.9:		Update the disk(9) man page to include information
		on the new d_gone() callback, as well as the
		previously added d_getattr() callback, d_descr
		field, and HBA PCI ID fields.

MFC after:	5 days
2012-06-24 04:29:03 +00:00
Justin T. Gibbs
416494d7c9 Plumb device physical path reporting from CAM devices, through GEOM and
DEVFS, and make it accessible via the diskinfo utility.

Extend GEOM's generic attribute query mechanism into generic disk consumers.
sys/geom/geom_disk.c:
sys/geom/geom_disk.h:
sys/cam/scsi/scsi_da.c:
sys/cam/ata/ata_da.c:
	- Allow disk providers to implement a new method which can override
	  the default BIO_GETATTR response, d_getattr(struct bio *).  This
	  function returns -1 if not handled, otherwise it returns 0 or an
	  errno to be passed to g_io_deliver().

sys/cam/scsi/scsi_da.c:
sys/cam/ata/ata_da.c:
	- Don't copy the serial number to dp->d_ident anymore, as the CAM XPT
	  is now responsible for returning this information via
	  d_getattr()->(a)dagetattr()->xpt_getatr().

sys/geom/geom_dev.c:
	- Implement a new ioctl, DIOCGPHYSPATH, which returns the GEOM
	  attribute "GEOM::physpath", if possible.  If the attribute request
	  returns a zero-length string, ENOENT is returned.

usr.sbin/diskinfo/diskinfo.c:
	- If the DIOCGPHYSPATH ioctl is successful, report physical path
	  data when diskinfo is executed with the '-v' option.

Submitted by:	will
Reviewed by:	gibbs
Sponsored by:	Spectra Logic Corporation

Add generic attribute change notification support to GEOM.

sys/sys/geom/geom.h:
	Add a new attrchanged method field to both g_class
	and g_geom.

sys/sys/geom/geom.h:
sys/geom/geom_event.c:
	- Provide the g_attr_changed() function that providers
	  can use to advertise attribute changes.
	- Perform delivery of attribute change notifications
	  from a thread context via the standard GEOM event
	  mechanism.

sys/geom/geom_subr.c:
	Inherit the attrchanged method from class to geom (class instance).

sys/geom/geom_disk.c:
	Provide disk_attr_changed() to provide g_attr_changed() access
	to consumers of the disk API.

sys/cam/scsi/scsi_pass.c:
sys/cam/scsi/scsi_da.c:
sys/geom/geom_dev.c:
sys/geom/geom_disk.c:
	Use attribute changed events to track updates to physical path
	information.

sys/cam/scsi/scsi_da.c:
	Add AC_ADVINFO_CHANGED to the registered asynchronous CAM
	events for this driver.  When this event occurs, and
	the updated buffer type references our physical path
	attribute, emit a GEOM attribute changed event via the
	disk_attr_changed() API.

sys/cam/scsi/scsi_pass.c:
	Add AC_ADVINFO_CHANGED to the registered asynchronous CAM
	events for this driver.  When this event occurs, update
	the physical patch devfs alias for this pass instance.

Submitted by:	gibbs
Sponsored by:	Spectra Logic Corporation
2011-06-14 17:10:32 +00:00
Nathan Whitehorn
65cb6238bd Add the disk ident and a human-meaningful description (here, the disk model
string) to the geom_disk config XML so that they are easily accessible from
userland.

MFC after:	1 week
2011-02-26 14:58:54 +00:00
Alexander Motin
8edcf69406 Export PCI IDs of ATA/SATA controllers through CAM and ata(4) layers to
GEOM. This information needed for proper soft-RAID's on-disk metadata
reading and writing.
2010-07-25 15:43:52 +00:00
Andrew Thompson
853a10a581 Revert r190676,190677
The geom and CAM changes for root_hold are the wrong solution for USB design
quirks.

Requested by:	scottl
2009-04-10 04:08:34 +00:00
Andrew Thompson
31da42bab2 Add interleaving root hold tokens from the CAM probe to disk_create and geom
provider tasting. This is needed for disk attachments that happen after threads
are running in the boot process.

Tested by:	rnoland
2009-04-03 19:49:33 +00:00
Pawel Jakub Dawidek
d0c11f9eb7 - Extend disk structure to allow to store disk's serial number, which can be
retrieved via GEOM::ident attribute.
- Bump disk(9) ABI version.

OK'ed by:	phk
2007-05-05 17:12:15 +00:00
Pawel Jakub Dawidek
1d2aee20b8 Add a new disk flag - DISKFLAG_CANFLUSHCACHE, which indicates that the disk
can handle BIO_FLUSH requests.

Sponsored by:	home.pl
2006-10-31 21:12:43 +00:00
John Polstra
a7e69e8b7d Fix a bug that caused some /dev entries to continue to exist after
the underlying drive had been hot-unplugged from the system.  Here
is a specific example.  Filesystem code had opened /dev/da1s1e.
Subsequently, the drive was hot-unplugged.  This (correctly) caused
all of the associated /dev/da1* entries to be deleted.  When the
filesystem later realized that the drive was gone it closed the
device, reducing the write-access counts to 0 on the geom providers
for da1s1e, da1s1, and da1.  This caused geom to re-taste the
providers, resulting in the devices being created again.  When the
drive was hot-plugged back in, it resulted in duplicate /dev entries
for da1s1e, da1s1, and da1.

This fix adds a new disk_gone() function which is called by CAM when a
drive goes away.  It orphans all of the providers associated with the
drive, setting an error condition of ENXIO in each one.  In addition,
we prevent a re-taste on last close for writing if an error condition
has been set in the provider.

Sponsored by:   Isilon Systems
Reviewed by:    phk
MFC after:      1 week
2005-11-18 02:43:49 +00:00
Poul-Henning Kamp
20b3501394 forward declare struct disk. 2005-03-15 10:47:38 +00:00
Poul-Henning Kamp
0b7ed341e1 Change the disk(9) API in order to make device removal more robust.
Previously the "struct disk" were owned by the device driver and this
gave us problems when the device disappared and the users of that device
were not immediately disappearing.

Now the struct disk is allocate with a new call, disk_alloc() and owned
by geom_disk and just abandonned by the device driver when disk_create()
is called.

Unfortunately, this results in a ton of "s/\./->/" changes to device
drivers.

Since I'm doing the sweep anyway, a couple of other API improvements
have been carried out at the same time:

The Giant awareness flag has been flipped from DISKFLAG_NOGIANT to
DISKFLAG_NEEDSGIANT

A version number have been added to disk_create() so that we can detect,
report and ignore binary drivers with old ABI in the future.

Manual page update to follow shortly.
2004-02-18 21:36:53 +00:00
Poul-Henning Kamp
afcbcfaed0 Change events to have an array of "void *" references, and give the
event posting functions varargs to fill these.

Attribute g_call_me() to appropriate g_geom's where necessary.

Add a flag argument to g_call_me() methods which will be used to signal
cancellation of events in the future.

This commit should be a no-op.
2003-04-02 20:41:18 +00:00
Poul-Henning Kamp
7c79beb3ce Start to split the GEOM/diskdriver specific bits into geom/geom_disk.h 2003-04-01 13:19:14 +00:00