v_caddr_t with extreme prejudice. Here the bogons were originally
the same as for c_caddr_t (half-baked K&R support), but rev.1.95
changed one wrong cast and one harmless cast to 2 wrong casts,
and rev.1.96 only fixed the originally wrong cast.
is not implied by -Wall as claimed by gcc.1. Adding it causes a
measly 7193 new warnings for LINT, mostly for "unused parameter" and
"comparison between signed and unsigned".
terminating c_caddr_t with extreme prejudice. Here we depended
on the "opaque" type c_caddr_t being precisely `const char *'
to do unportable pointer arithmetic.
c_caddr_t with extreme prejudice. Here the original casts to
caddr_t were to support K&R compilers (or missing prototypes),
but the relevant source files require an ANSI compiler.
problem and solution is outlined in the comments, but basically
we needed a way to allow the SYSINIT mechanism to handle const void *
arguments and function pointers as well as non-const arguments and
function pointers while still maintaining the compiler's ability to
issue warnings if you try to use a bad combination.
c_caddr_t with extreme prejudice. Here the point of the original
cast to caddr_t was to break the warning about the const mismatch
between write(2)'s `const void *buf' and `struct uio's `char
*iov_base' (previous bitrot gave a gratuitous dependency on caddr_t
being char *). Compiling with -Wcast-qual made the cast a full
no-op.
This change has no effect on the warning for discarding `const'
on assignment to iov_base. The warning should not be fixed by
splitting `struct iovec' into a non-const version for read()
and a const version for write(), since correct const poisoning
would affect all pointers to i/o addresses. Const'ness should
probably be forgotten by not declaring it in syscalls.master.
c_caddr_t with extreme prejudice. Here we want to convert from
`const char *' to `const char *'. Casting through c_caddr_t is
not the way to do this. The original cast to caddr_t was apparently
to break warnings about const mismatches in other versions of BSD
(in 4.4BSDLite2, the conversion is from `const char *path' to
plain caddr_t).
Add C_DECLARE_MODULE - same as DECLARE_MODULE but uses C_SYSINIT
instead of SYSINIT.
The C_ items are going to be used for items passing const data to
sysinit.
the interrupt which will be given to the PCIC. If the value supplied is
illegal or not available, interrupts will be turned off and polled mode
used instead.
apparently in accordance with style(9).
Complained-about-by: bde
vinumopen: Change check for root user to a call to suser(9)
vinumclose: Remove check for root user.
Nitpicked-by: phk
Auto Detection Mode. This leaves MSP3400C owners still unsupported.
Thanks to Gerd Knorr <kraxel@cs.tu-berlin.de> for providing some early
assistance and sample code in the linux bttv driver.
Nicolas Souchu <nsouch@freebsd.org> ported the msp_read/write/reset
functions to smbus/iicbus.
METEOR_INPUT_DEV2 now selects a composite camera on the SVIDEO port.
For true SVIDEO, use METEOR_INPUT_DEV_SVIDEO.
If you get a monochrome image from the SVIDEO port, you have
seleted the wrong input type.
Tested by: Johan Larsson<gozer@ludd.luth.se>
version and a const void * version. Currently the const void * version
simply calls the void * version ( i.e. no 'fix' is in place ).
A solution needs to be found for the C_SYSINIT ( etc...) family of
macros that allows const void * without generating a warning, but
does not allow non-const void *.
Sun implemented iBCS2 compatibility on Solaris >= 2.6: The emulator
runs in user-mode, patching the LDT so that client programs making
syscalls through the old iBCS2 call gate get handled by the emulator
process. Unemulated syscalls therefore need their own call-gate that
bypasses the emulator. Sun chose LDT entry 4 to implement this, which
is what we've been using as LUDATA_SEL, so we need to change LUDATA_SEL
if we want to run Solaris executables.
Discussed with: Mike Smith
keyboard.
- Translate some keycode for the 84 keyboard so that the 84 keyboard
and the 101 keyboard become more compatible in terms of keycodes.
- Updated the built-in keymaps so that it is in line with the recent
changes in share/syscons/keymaps.
- Added some comment on the Pause/Break key on the 101 keyboard.
vinum_scandisk: check not only drive error, but also drive state,
before accessing the drive.
drivecmp: Remove warning messages by Backing out overly constant
declarations in revision 1.9.
also a bit of a BDE patch in there I beleive. Backs out a fix I needed for Cyrix support
early on but it turns out that a later fix in the cyrix support made it un-needed.
address, account for cards which report the Texas Instruments PCI vendor ID
in addition to Compaq and Olicom. (I don't actually have a card that
reports the TI vendor/device ID, but it appears that some Racore adapters
work this way, and failing to account for it when we have the ID listed
in the supported devices list is a bug.)
This changes the definitions of a few items so that structures are the
same whether or not the option itself is enabled. This allows
people to enable and disable the option without recompilng the world.
As the author says:
|I ran into a problem pulling out the VM_STACK option. I was aware of this
|when I first did the work, but then forgot about it. The VM_STACK stuff
|has some code changes in the i386 branch. There need to be corresponding
|changes in the alpha branch before it can come out completely.
what is done:
|
|1) Pull the VM_STACK option out of the header files it appears in. This
|really shouldn't affect anything that executes with or without the rest
|of the VM_STACK patches. The vm_map_entry will then always have one
|extra element (avail_ssize). It just won't be used if the VM_STACK
|option is not turned on.
|
|I've also pulled the option out of vm_map.c. This shouldn't harm anything,
|since the routines that are enabled as a result are not called unless
|the VM_STACK option is enabled elsewhere.
|
|2) Add what appears to be appropriate code the the alpha branch, still
|protected behind the VM_STACK switch. I don't have an alpha machine,
|so we would need to get some testers with alpha machines to try it out.
|
|Once there is some testing, we can consider making the change permanent
|for both i386 and alpha.
|
[..]
|
|Once the alpha code is adequately tested, we can pull VM_STACK out
|everywhere.
|
Submitted by: "Richard Seaman, Jr." <dick@tar.com>
This takes the conditionals out of the code that has been tested by
various people for a while.
ps and friends (libkvm) will need a recompile as some proc structure
changes are made.
Submitted by: "Richard Seaman, Jr." <dick@tar.com>
directory containing rc.conf.local and rc.local, and possibly other
things in the future.
This sysctl is used by the diskless startup code and new rc.conf. If
it cannot be found or is empty, the system should revert to using /etc.
where select(2) can return that a listening socket has a connected socket
queued, the connection is broken, and the user calls accept(2), which then
blocks because there are no connections queued.
Reviewed by: wollman
Obtained from: NetBSD
(ftp://ftp.NetBSD.ORG/pub/NetBSD/misc/security/patches/19990120-accept)
bootinfo structure where bi_esymtab < bi_symtab was being passed
to the kernel. In the case of older 2.x kernels, this was causing
garbage to be printed to the video console, followed by an exception.
This should resolve a problem reported on -current by Peter Jeremy
<peter.jeremy@auss2.alcatel.com.au>.
iicbus(4) and smb(4).
User programs are available to retrieve SDRAM and sensor info, contact
the author.
Submitted by: Takanori Watanabe <takawata@shidahara1.planet.sci.kobe-u.ac.jp>
Reviewed by: Mike Smith <msmith@freebsd.org>
buggy for fifos, and no one seems to have investigated its behaviour
on other types of files. It has been broken since the Lite2 merge
in rev.1.54.
Nagged about by: Brian Feldman (green@unixhelp.org)
I added a FICL_TRACE-conditioned trace facility based on "see".
It is ugly because words' functions are almost all static, and ficlExec,
where the trace has to be located, can't get their pointers. So, #ifdef
this staticization, and add most of see's body into ficlExec. Duplication
of code, uglyness, etc. But it is cleanly #ifdef'ed, and works like a
charm.
It does not provide "step" facility, though, just trace. It is
tunable at run-time through "trace!". If anyone (most likely me :) ever
wants a step facility, I'll add it. Should be easy.
PR: bin/9652
Submitted by: "Daniel C. Sobral" <dcs@newsguy.com>
vm_page_rename(), but never pulled the page off PQ_CACHE if it was on
PQ_CACHE. Dirty pages in PQ_CACHE are not allowed and a KASSERT was
added in -4.x to test for this... and got hit.
In -4.x, vm_page_rename() automatically dirties the page. This commit
also has it deal with the PQ_CACHE case, deactivating the page in that
case.
FICL's TYPE copies the counted string to HERE, as abial has
remarked. Answering to abial's question, this is NOT garanteed to have
enough space.
...
We have dynamic memory. Even before memory-alloc got in, we
already had dynamic memory. Use it, then! (ficlMalloc is sysdep, so I
suppose that's why it was not used for TYPE; ficl is probably designed
to work without a working ficlFree).
Submitted by: "Daniel C. Sobral" <dcs@newsguy.com>
values. The 'int' return value for the procedure was never used and
not well defined in any case when there are mixed errors on pages, so
it has been removed. vm_pager_put_pages() and associated vm_pager
functions now return void.
Implement a new variable 'root_disk_unit' which supersedes
'num_ide_disks' and makes it possible to explicitly set the
root device unit number regardless of type considerations.
bootinfo.c
If we can't calculate a dev_t for the root disk, complain and
don't proceed to boot with an invalid boot device.
patch. lf can't be dereferenced after the unload attempt, in case it
was freed. Instead, decrement first and back it out if the unload failed.
This should be relatively immune to races caused by the user since the
userref count will be zero for the duration of the actual unloading and
will stop further kldunload attempts.
Submitted by: Ustimenko Semen <semen@iclub.nsu.ru>
Make TIB handling use buffer size to conform with ANS Forth.
Add ANS MEMORY-ALLOC word set.
See the PRs for extensive details.
PR: kern/9412 kern/9442 kern/9514
Submitted by: PRs from Daniel Sobral <dcs@newsguy.com>
help.common
interp.c
Rename the 'source' command to 'include' in order to avoid conflict
with the ANS Forth command of the same name. (kern/9473)
interp_forth.c:
Changes from kern/9412 (EXCEPTION word), kern/9442 (TIB buffer
sizing) and an improved version of kern/9460 (set
version numbers).
load_aout.c:
Trim some obsolete #if 0'ed cruft.
pnp.c:
Tidy the pnpscan output, turn off the module scanning until we
sort out how to do it right.
PR: kern/9412 kern/9442 kern/9460 kern/9473
Submitted by: PRs from Daniel Sobral <dcs@newsguy.com>
of the CRC as the multicast hash table bit, not the lower six bits. Plus
we have to flip on all bits in the table for multicast mode.
Pointed out by: Kazushi SUGYO <k-sugyou@nwsl.mesh.ad.jp>
turns out to not be useful to unwind the dependencies and continue in
the face of a fatal error.
Also changed the log() to a printf() in softdep_error() so that it will
be output in the case of a impending panic.
Submitted by: Kirk McKusick <mckusick@mckusick.com>
the buffer as still being dirty. This isn't a perfect solution, but
throwing away the buffer contents will often result in filesystem
corruption and this solution will at least correctly deal with transient
errors.
Submitted by: Kirk McKusick <mckusick@mckusick.com>
