jail(8) does a chdir(2) to the given path argument. Kernel evaluates the
jail path from the new cwd and not from the original cwd, which leads to
undesired behavior if given a relative path.
Reviewed by: jamie
MFC after: 2 weeks
consistently, creating some namecache entries without NCF_TS flag.
This causes panic due to failed assertion.
As a temporal relief, remove the assert. Return epoch timestamp for
the entries without timestamp if asked.
While there, consolidate the code which returns timestamps, into a
helper cache_out_ts().
Discussed with: jhb
MFC after: 2 weeks
widgets. I am not sure if S/PDIF supports 32bit samples, but my Marantz
SR4001 doesn't, producing only single clicks on playback start/stop.
Because HDA controller requires 32bit alignment for all samples above 16bit,
we can't handle this situation in regular way and have to set 32bit format
in sound(4) for anything above 16bit. To workaround the problem, prefer
to setup hardware to use 24/20bit samples when 32bit format requested. Add
dev.pcm.X.play.32bit and dev.pcm.X.rec.32bit sysctls to control what format
really use for 32bit samples.
MFC after: 2 months
Sponsored by: iXsystems, Inc.
hash with names of its hooks. It starts with size of 16, and
grows when number of hooks reaches twice the current size. A
failure to grow (memory is allocated with M_NOWAIT) isn't
fatal, however.
I used standard hash(9) function for the hash. With 25000
hooks named in the mpd (ports/net/mpd5) manner of "b%u", the
distributions is the following: 72.1% entries consist of one
element, 22.1% consist of two, 5.2% consist of three and
0.6% of four.
Speedup in a synthetic test that creates 25000 hooks and then
runs through a long cyclce dereferencing them in a random order
is over 25 times.
installer on a VTY with no kernel messages (VTY 2), show the installer
log in real time on VTY 3, and spawn a shell on VTY 4.
PR: bin/161047, bin/161048
MFC after: 2 weeks
mutex(9) to rwlock(9) based locks.
While here remove dropping lock when processing NGM_LISTNODES,
and NGM_LISTTYPES generic commands. We don't need to drop it
since memory allocation is done with M_NOWAIT.
No cross-referencing was added to the configs, so no
automatic linking to the documentation of other subsystems.
Drivers which already contain doxygen markup:
agp ath bktr bxe cxgb cxgbe dpt drm e1000 iir
ixgbe mwl nxge ofw pccard siba wpi xen
- retrive only one, specified limit for a process, not the whole
array, as it was previously (the sysctl has been added recently and
has not been backported to stable yet, so this change is ok);
- allow to set a resource limit for another process.
Submitted by: Andrey Zonov <andrey at zonov.org>
Discussed with: kib
Reviewed by: kib
MFC after: 2 weeks
maximal from 64K to 256K.
We usually don't need 750 sound interrupts per second (1.3ms latency)
when playing 192K/24/8 stream. 187 should be better. On usual 48K/16/2
it is just enough for hw.snd.latency=9 at hw.snd.latency_profile=1 with
23 and 6 interrupts per second.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
In the first command of a 'for', $? should be the exit status of the last
pipeline (command substitution in the word list or command before 'for'),
not always 0.
- A real filename is now shown in an output report when "-f file" is specified.
- Add Xr lastlogin into last(1) manual page.
Reviewed by: ed
MFC after: 1 week
- ipv6_enable + ipv6_gateway_enable should unset ACCEPT_RTADV by default for
backward compatibility.
- Configurations in ipv6_prefix_IF should be recognized even if there is no
ifconfig_IF_ipv6.
- DAD wait should be performed at once, not on a per-interface basis, if
possible. This fixes an issue that a system with a lot of IPv6-capable
interfaces takes too long for booting.
MFC after: 1 week
Previous code was relatively dumb. During CODEC probe it was tracing signals
and statically binding amplifier controls to the OSS mixer controls. To set
volume it just set all bound amplifier controls proportionally to mixer
level, not looking on their hierarchy and amplification levels/offsets.
New code is much smarter. It also traces signals during probe, but mostly
to find out possible amplification control rages in dB for each specific
signal. To set volume it retraces each affected signal again and sets
amplifiers controls recursively to reach desired amplification level in dB.
It would be nice to export values in dB to user, but unluckily our OSS mixer
API is too simple for that.
As result of this change:
- cascaded amplifiers will work together to reach maximal precision.
If some input has 0/+40dB preamplifier with 10dB step and -10/+10dB mixer
with 1dB step after it, new code will use both to provide 0/+40dB control
with 1dB step! We could even get -10/+50dB range there, but that is
intentionally blocked for now.
- different channels of multichannel associations on non-uniform CODECs
such as VIA VT1708S will have the same volume, not looking that control
ranges are different. It was not good when fronts were 12dB louder.
- for multiplexed recording, when we can record from only one source at
a time, we can now use recording amplifier controls to set different
volume levels for different inputs if they have no own controls of they
are less precise. If recording source change, amplifiers will be
reconfigured.
To improve out-of-the-box behavior, ignore default volume levels set by
sound(4) and use own, more reasonable: +20dB for mics, -10dB for analog
output volume and 0dB for the rest of controls. sound(4) defaults of 75%
mean absolutely random things for different controls of different CODECs
because of very different control ranges.
Together with further planned automatic recording source selection this
should allow users to get fine playback and recording without touching
mixer first.
Note that existing users should delete /var/db/mixer*-state and reboot
or trigger CODEC reconfiguration to get new default values.
MFC after: 2 months
Sponsored by: iXsystems, Inc.
This makes it much easier to determine whether an event occurs in the
net80211 taskqueue (which was called "ath0 taskq") or the ath driver
taskqueue (which is also called "ath0 taskq".)
comments to longer, also refining strange ones.
Properly use #ifdef rather than #if defined() where possible. Four
#if defined(PCBGROUP) occurances (netinet and netinet6) were ignored to
avoid conflicts with eventually upcoming changes for RSS.
Reported by: bde (most)
Reviewed by: bde
MFC after: 3 days
provide struct namecache_ts which is the old struct namecache. Only
allocate struct namecache_ts if non-null struct timespec *tsp was
passed to cache_enter_time, otherwise use struct namecache.
Change struct namecache allocation and deallocation macros into static
functions, since logic becomes somewhat twisty. Provide accessor for
the nc_name member of struct namecache to hide difference between
struct namecache and namecache_ts.
The aim of the change is to not waste 20 bytes per small namecache
entry.
Reviewed by: jhb
MFC after: 2 weeks
X-MFC-note: after r230394
names and wants to sort them by name, ie. when executes:
# zfs list -t snapshot -o name -s name
Because only name is needed we don't have to read all snapshot properties.
Below you can find how long does it take to list 34509 snapshots from a single
disk pool before and after this change with cold and warm cache:
before:
# time zfs list -t snapshot -o name -s name > /dev/null
cold cache: 525s
warm cache: 218s
after:
# time zfs list -t snapshot -o name -s name > /dev/null
cold cache: 1.7s
warm cache: 1.1s
MFC after: 1 week
the signal handlers with the context information in the deferrred
case.
Only enable the use of getcontextx(3) in the deferred signal delivery
code on amd64 and i386. Sparc64 seems to have some undetermined issues
with interaction of alloca(3) and signal delivery.
Tested by: flo (who also provided sparc64 harware access for me), pho
Discussed with: marius
MFC after: 1 month
fit into existing mcontext_t.
On i386 and amd64 do return the extended FPU states using
getcontextx(3). For other architectures, getcontextx(3) returns the
same information as getcontext(2).
Tested by: pho
MFC after: 1 month
64bit and 32bit ABIs. As a side-effect, it enables AVX on capable
CPUs.
In particular:
- Query the CPU support for XSAVE, list of the supported extensions
and the required size of FPU save area. The hw.use_xsave tunable is
provided for disabling XSAVE, and hw.xsave_mask may be used to
select the enabled extensions.
- Remove the FPU save area from PCB and dynamically allocate the
(run-time sized) user save area on the top of the kernel stack,
right above the PCB. Reorganize the thread0 PCB initialization to
postpone it after BSP is queried for save area size.
- The dumppcb, stoppcbs and susppcbs now do not carry the FPU state as
well. FPU state is only useful for suspend, where it is saved in
dynamically allocated suspfpusave area.
- Use XSAVE and XRSTOR to save/restore FPU state, if supported and
enabled.
- Define new mcontext_t flag _MC_HASFPXSTATE, indicating that
mcontext_t has a valid pointer to out-of-struct extended FPU
state. Signal handlers are supplied with stack-allocated fpu
state. The sigreturn(2) and setcontext(2) syscall honour the flag,
allowing the signal handlers to inspect and manipilate extended
state in the interrupted context.
- The getcontext(2) never returns extended state, since there is no
place in the fixed-sized mcontext_t to place variable-sized save
area. And, since mcontext_t is embedded into ucontext_t, makes it
impossible to fix in a reasonable way. Instead of extending
getcontext(2) syscall, provide a sysarch(2) facility to query
extended FPU state.
- Add ptrace(2) support for getting and setting extended state; while
there, implement missed PT_I386_{GET,SET}XMMREGS for 32bit binaries.
- Change fpu_kern KPI to not expose struct fpu_kern_ctx layout to
consumers, making it opaque. Internally, struct fpu_kern_ctx now
contains a space for the extended state. Convert in-kernel consumers
of fpu_kern KPI both on i386 and amd64.
First version of the support for AVX was submitted by Tim Bird
<tim.bird am sony com> on behalf of Sony. This version was written
from scratch.
Tested by: pho (previous version), Yamagi Burmeister <lists yamagi org>
MFC after: 1 month
Currently the code is not built by any modules. That will
be fixed later. The Atmel ARM bus interface file part of this
commit is just for sake of example. All registers and bits are
declared like macros and not C-structures like in official
Synopsis header files. This driver mostly origins from the
musb_otg.c driver in FreeBSD except that the chip specific
programming has been replaced by the one for DWC 2.0 USB OTG.
Some parts related to system suspend and resume have been left
like empty functions for the future. USB suspend and resume is
fully supported.
