Commit Graph

84 Commits

Author SHA1 Message Date
Pedro F. Giffuni
453130d9bf sys/dev: minor spelling fixes.
Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
Alexander Motin
6f954fb36b Remove MAXBSIZE use from drivers where it has nothing to do.
In some cases limits are just not needed, in others -- DFLTPHYS is the
right constant to use instead.

MFC after:	1 month
2015-03-22 16:10:28 +00:00
John Baldwin
51ba7b6f3e Remove remaining 4.x compat shims. No resulting changes (verified by
md5).
2012-09-07 18:41:19 +00:00
John Baldwin
1832280a9e - Explicitly call twe_done() to poll the hardware when looping in
twe_start() to simulate the behavior on 4.x where the driver dropped
  spl to allow interrupts to run to free up space in the command
  queue.  Be careful to only poll if we are going to make at least
  one more attempt to queue the current command.  Also, when polling,
  be careful to not call twe_startio() to queue more commands to avoid
  recursion.
- Move the buffer for formatting AEN messages into the softc instead of
  using a single driver-wide static buffer.

Requested by:	scottl (1)
Tested by:	Mike Tancsa @ Sentex
2012-09-05 14:31:58 +00:00
John Baldwin
06e8730c59 Add locking to the twe(4) driver and make it MPSAFE:
- Add per-controller configuration (sx) and I/O (mutex) locks.  The
  configuration lock protects the relationship of volumes and drives
  while the I/O lock protects access to the controller's registers and
  the main I/O path.
- Remove some checks for M_WAITOK malloc()'s failing.
- Remove the explicit bus space tag/handle from the softc and use
  bus_*() rather than bus_space_*().
- Reuse the existing new-bus sysctl context instead of creating a
  new one.
- Remove compat shims for FreeBSD 4.x.
- Use pci_enable_busmaster() rather than doing it by hand, and rely
  on bus_alloc_resource() to enable PCI I/O decoding.

Tested by:	Mike Tancsa  mike sentex net
Reviewed by:	scottl (partially)
MFC after:	1 month
2012-08-13 21:29:34 +00:00
Scott Long
b6f97155cc Convert a number of drivers to obtaining their parent DMA tag from their
PCI device attachment.
2012-03-12 08:03:51 +00:00
Marius Strobl
4b7ec27007 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
Ed Schouten
d745c852be Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.
This means that their use is restricted to a single C file.
2011-11-07 06:44:47 +00:00
Alexander Motin
c078c19633 Teach twe driver to report array stripe size to GEOM. 2009-12-25 17:34:43 +00:00
Roman Divacky
fd3c9374ff Change the command argument to ioctl routines to u_long to avoid
truncating the command to 32bit on 64bit archs where int is 32bit
(ie. amd64).

Approved by:	scottl
Approved by:	ed (mentor, implicit)
2009-09-22 16:28:07 +00:00
John Baldwin
a56fe095f0 Temporarily revert the new-bus locking for 8.0 release. It will be
reintroduced after HEAD is reopened for commits by re@.

Approved by:	re (kib), attilio
2009-08-20 19:17:53 +00:00
Attilio Rao
444b91868b Make the newbus subsystem Giant free by adding the new newbus sxlock.
The newbus lock is responsible for protecting newbus internIal structures,
device states and devclass flags. It is necessary to hold it when all
such datas are accessed. For the other operations, softc locking should
ensure enough protection to avoid races.

Newbus lock is automatically held when virtual operations on the device
and bus are invoked when loading the driver or when the suspend/resume
take place. For other 'spourious' operations trying to access/modify
the newbus topology, newbus lock needs to be automatically acquired and
dropped.

For the moment Giant is also acquired in some key point (modules subsystem)
in order to avoid problems before the 8.0 release as module handlers could
make assumptions about it. This Giant locking should go just after
the release happens.

Please keep in mind that the public interface can be expanded in order
to provide more support, if there are really necessities at some point
and also some bugs could arise as long as the patch needs a bit of
further testing.

Bump __FreeBSD_version in order to reflect the newbus lock introduction.

Reviewed by:    ed, hps, jhb, imp, mav, scottl
No answer by:   ariff, thompsa, yongari
Tested by:      pho,
                G. Trematerra <giovanni dot trematerra at gmail dot com>,
                Brandon Gooch <jamesbrandongooch at gmail dot com>
Sponsored by:   Yahoo! Incorporated
Approved by:	re (ksmith)
2009-08-02 14:28:40 +00:00
Warner Losh
00b4e54ae7 We no longer need to use d_thread_t, migrate to struct thread *. 2009-05-20 17:29:21 +00:00
Ed Schouten
0de5b9b0f0 Use si_drv1 instead of dev2unit() in twe(4) and twa(4)
Reviewed by:	scottl
2009-04-14 14:02:43 +00:00
Ed Schouten
6bfa9a2d66 Replace all calls to minor() with dev2unit().
After I removed all the unit2minor()/minor2unit() calls from the kernel
yesterday, I realised calling minor() everywhere is quite confusing.
Character devices now only have the ability to store a unit number, not
a minor number. Remove the confusion by using dev2unit() everywhere.

This commit could also be considered as a bug fix. A lot of drivers call
minor(), while they should actually be calling dev2unit(). In -CURRENT
this isn't a problem, but it turns out we never had any problem reports
related to that issue in the past. I suspect not many people connect
more than 256 pieces of the same hardware.

Reviewed by:	kib
2008-09-27 08:51:18 +00:00
Christian Brueffer
a02b3966fc Add missing \n.
PR:		120341
Submitted by:	CyberLeo <cyberleo@cyberleo.net>
Approved by:	rwatson (mentor), aradford@amcc.com
MFC after:	3 days
2008-02-12 08:58:26 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Robert Watson
5bb84bc84b Normalize a significant number of kernel malloc type names:
- Prefer '_' to ' ', as it results in more easily parsed results in
  memory monitoring tools such as vmstat.

- Remove punctuation that is incompatible with using memory type names
  as file names, such as '/' characters.

- Disambiguate some collisions by adding subsystem prefixes to some
  memory types.

- Generally prefer lower case to upper case.

- If the same type is defined in multiple architecture directories,
  attempt to use the same name in additional cases.

Not all instances were caught in this change, so more work is required to
finish this conversion.  Similar changes are required for UMA zone names.
2005-10-31 15:41:29 +00:00
Yoshihiro Takahashi
d4fcf3cba5 Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64.  The optimization is a trivial on recent machines.

Reviewed by:	-arch (imp, marcel, dfr)
2005-05-29 04:42:30 +00:00
Scott Long
9ab2d898e7 Use correct flags for bus_dma_tag_create(). 2005-03-06 20:57:54 +00:00
Warner Losh
2ece8174c1 Use BUS_PROBE_DEFAULT in preference to 0. Also for vx, return
BUS_PROBE_LOW_PRIORITY in stead of ifdef for devices that xl and vx
both support so that xl will snarf them on up.
2005-03-01 07:50:12 +00:00
Vinod Kashyap
7a824c3756 Undoing recent changes to make 3ware's i386 tools work on amd64, since there are
now amd64 versions of CLI and 3DM2 available.
2005-02-17 19:05:42 +00:00
Scott Long
8a87dc6fd9 Fix crashdumps on twe. The twe_immediate_request() path was not only
copying data to a temporary buffer before the I/O, but also copying that
temporary buffer back to the original data location after the I/O.  When
you're dumping kernel heap and stack and protected pages, this is very
very bad.

A belated thanks to Robert Watson for donating hardware for this (and future)
work.

MFC after: 3 days
2005-02-08 03:43:02 +00:00
Peter Wemm
d6ef0bf119 Recognize the 32-bit form of the twe binary passthrough ioctl()s so that
there is some hope for the 32-bit management utilities to run.  I've used
the cli successfully, but 3dm2 doesn't work for other reasons.  Of course,
a native binary of the 3dm2 and cli would be much better, but that doesn't
exist.
2004-12-17 17:45:29 +00:00
Poul-Henning Kamp
89c9c53da0 Do the dreaded s/dev_t/struct cdev */
Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
Vinod Kashyap
75e4d88db4 Fix for a problem seen only on 6xxx series controllers, where-in the
driver tries to submit the same request repeatedly, on finding the
controller cmd queue to be full.

Submitted by:ps, vkashyap
Reviewed by:re
Approved by:re
2004-06-11 18:42:44 +00:00
Poul-Henning Kamp
fe12f24bb0 Add missing <sys/module.h> includes 2004-05-30 20:08:47 +00:00
Vinod Kashyap
088113ed0b 1. Fixed potential problem that would cause out-of-order requests in twe_startio.
2. Changed version.

Submitted by: scottl
Reviewed by: vkashyap
Approved by: re
2004-05-12 04:10:37 +00:00
Vinod Kashyap
c2d083bbba 1. Better handle a return value of EINPROGRESS from bus_dmamap_load.
2. Check for bad return value from twe_map_request in places where there
   was no checking.

Reviewed by: ps
2004-03-25 19:30:35 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
Colin Percival
cd8aaf2121 Check that twed_sc is non-NULL before dereferencing it, not after.
Reported by:	"Ted Unangst" <tedu@coverity.com>
Approved by:	rwatson (mentor)
2004-02-22 09:58:34 +00:00
Colin Percival
27021df2ff Fix off-by-one error: sc->twe_drive is an array of TWE_MAX_UNITS elements.
Reported by:	"Ted Unangst" <tedu@coverity.com>
Approved by:	rwatson (mentor)
2004-02-22 01:03:38 +00:00
Poul-Henning Kamp
dc08ffec87 Device megapatch 4/6:
Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.

Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
2004-02-21 21:10:55 +00:00
Poul-Henning Kamp
c9c7976f7f Device megapatch 1/6:
Free approx 86 major numbers with a mostly automatically generated patch.

A number of strategic drivers have been left behind by caution, and a few
because they still (ab)use their major number.
2004-02-21 19:42:58 +00:00
Poul-Henning Kamp
0b7ed341e1 Change the disk(9) API in order to make device removal more robust.
Previously the "struct disk" were owned by the device driver and this
gave us problems when the device disappared and the users of that device
were not immediately disappearing.

Now the struct disk is allocate with a new call, disk_alloc() and owned
by geom_disk and just abandonned by the device driver when disk_create()
is called.

Unfortunately, this results in a ton of "s/\./->/" changes to device
drivers.

Since I'm doing the sweep anyway, a couple of other API improvements
have been carried out at the same time:

The Giant awareness flag has been flipped from DISKFLAG_NOGIANT to
DISKFLAG_NEEDSGIANT

A version number have been added to disk_create() so that we can detect,
report and ignore binary drivers with old ABI in the future.

Manual page update to follow shortly.
2004-02-18 21:36:53 +00:00
Paul Saab
a85e26c4bf After extensive QA cycles at 3ware, bring the driver in-line with all the
issues which they found and asked to be changed so 3ware can offcially
support the driver.

Summary of the most significant changes:

- TWE_OVERRIDE is no longer supported
- If twe_getparam failed, bogus data would be returned to the caller
- Cache the device unit in the twe_drive structure to aid debugging
- Add the 3ware driver version.
- Proper return error codes for many functions.
- Track the minimum queue length statistics
- 4.x compat: use the cached unit number from the twe_drive structure
  instead of the the cached si_drv2.  3ware found that after many loads
  and unloads that si_drv2 became corrupted.  This did not happen in
  -current.

Submitted by:	Vinod Kashyap (with modifications by me)
Approved by:	re (rwatson)
2003-12-02 07:57:20 +00:00
Paul Saab
c5225b4d32 Correct the structure packing.
Reported by:	Vinod Kashyap <vkashyap@3WARE.com>
2003-11-06 08:09:29 +00:00
Warner Losh
90cf0136c4 Prefer new location of pci include files (which have only been in the
tree for two or more years now), except in a few places where there's
code to be compatible with older versions of FreeBSD.
2003-08-22 07:08:17 +00:00
Paul Saab
ad8fc00c75 Don't tsleep on NULL 2003-08-19 12:22:17 +00:00
Paul Saab
faafb4863d Oops.. Some debugging code snuck in here.
Requeue the request if the controller is busy.
2003-08-12 22:33:49 +00:00
Paul Saab
f487e0e2df Fix the busdma support in twe to support EINPROGRESS and enable it for
use with PAE kernels.
2003-08-12 06:38:55 +00:00
Paul Saab
235a79707a Properly support the 3ware generic API.
- Build SGL's for ATA_PASSTHROUGH commands
- Fallback to using the sgl_offset when the opcode is unknown for building
  SGL's/
- Add ioctl calls for adding and removing units.
- Define previously undefined AEN's
- Allocate memory for the ioctl payload in multiples of 512bytes.

MFC after:      1 week
2003-08-05 19:55:21 +00:00
Scott Long
f6b1c44d1f Mega busdma API commit.
Add two new arguments to bus_dma_tag_create(): lockfunc and lockfuncarg.
Lockfunc allows a driver to provide a function for managing its locking
semantics while using busdma.  At the moment, this is used for the
asynchronous busdma_swi and callback mechanism.  Two lockfunc implementations
are provided: busdma_lock_mutex() performs standard mutex operations on the
mutex that is specified from lockfuncarg.  dftl_lock() is a panic
implementation and is defaulted to when NULL, NULL are passed to
bus_dma_tag_create().  The only time that NULL, NULL should ever be used is
when the driver ensures that bus_dmamap_load() will not be deferred.
Drivers that do not provide their own locking can pass
busdma_lock_mutex,&Giant args in order to preserve the former behaviour.

sparc64 and powerpc do not provide real busdma_swi functions, so this is
largely a noop on those platforms.  The busdma_swi on is64 is not properly
locked yet, so warnings will be emitted on this platform when busdma
callback deferrals happen.

If anyone gets panics or warnings from dflt_lock() being called, please
let me know right away.

Reviewed by:	tmm, gibbs
2003-07-01 15:52:06 +00:00
Poul-Henning Kamp
891619a66d Use bioq_flush() to drain a bio queue with a specific error code.
Retain the mistake of not updating the devstat API for now.

Spell bioq_disksort() consistently with the remaining bioq_*().

#include <geom/geom_disk.h> where this is more appropriate.
2003-04-01 15:06:26 +00:00
Poul-Henning Kamp
fe002e7546 Fix a bug I introduced by overlooking the fact that "unit number" can
be one of several things in this driver.

Spotted & Tested by:	alfred
2003-03-15 12:16:33 +00:00
Poul-Henning Kamp
60794e0478 Centralize the devstat handling for all GEOM disk device drivers
in geom_disk.c.

As a side effect this makes a lot of #include <sys/devicestat.h>
lines not needed and some biofinish() calls can be reduced to
biodone() again.
2003-03-08 08:01:31 +00:00
Poul-Henning Kamp
7ac40f5f59 Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by:    re(scottl)
2003-03-03 12:15:54 +00:00
Poul-Henning Kamp
95e4359c8e Use canonical format for cdevsw initialization. 2003-03-02 18:51:46 +00:00
Poul-Henning Kamp
42170da1d8 NO_GEOM cleanup:
Move to new "struct disk *" centric API.
Retire major #147 (twed)
2003-02-25 07:41:51 +00:00
Poul-Henning Kamp
d9af634109 Use DISKFLAG_OPEN rather than maintaining our own flag.
Use nullclose() rather than now empty twed_close().
2003-02-22 10:42:21 +00:00