Commit Graph

16 Commits

Author SHA1 Message Date
David Xu
e81bbed597 Treat initial thread as scope system thread when KSE mode is not activated
yet, so we can protect some locking code from being interrupted by signal
handling. When KSE mode is turned on, reset the thread flag to scope process
except we are running in 1:1 mode which we needn't turn it off.
Also remove some unused member variables in structure kse.

Tested by: deischen
2003-08-18 03:58:29 +00:00
David Xu
090b336154 o Eliminate upcall for PTHREAD_SYSTEM_SCOPE thread, now it
is system bound thread and when it is blocked, no upcall is generated.

o Add ability to libkse to allow it run in pure 1:1 threading mode,
  defining SYSTEM_SCOPE_ONLY in Makefile can turn on this option.

o Eliminate code for installing dummy signal handler for sigwait call.

o Add hash table to find thread.

Reviewed by: deischen
2003-07-17 23:02:30 +00:00
David Xu
91f7616aff Avoid accessing user provided parameters in critical region.
Reviewed by: deischen
2003-07-07 04:28:23 +00:00
David Xu
a772047bc6 o Use a daemon thread to monitor signal events in kernel, if pending
signals were changed in kernel, it will retrieve the pending set and
  try to find a thread to dispatch the signal. The dispatching process
  can be rolled back if the signal is no longer in kernel.

o Create two functions _thr_signal_init() and _thr_signal_deinit(),
  all signal action settings are retrieved from kernel when threading
  mode is turned on, after a fork(), child process will reset them to
  user settings by calling _thr_signal_deinit(). when threading mode
  is not turned on, all signal operations are direct past to kernel.

o When a thread generated a synchoronous signals and its context returned
  from completed list, UTS will retrieve the signal from its mailbox and try
  to deliver the signal to thread.

o Context signal mask is now only used when delivering signals, thread's
  current signal mask is always the one in pthread structure.

o Remove have_signals field in pthread structure, replace it with
  psf_valid in pthread_signal_frame. when psf_valid is true, in context
  switch time, thread will backout itself from some mutex/condition
  internal queues, then begin to process signals. when a thread is not
  at blocked state and running, check_pending indicates there are signals
  for the thread, after preempted and then resumed time, UTS will try to
  deliver signals to the thread.

o At signal delivering time, not only pending signals in thread will be
  scanned, process's pending signals will be scanned too.

o Change sigwait code a bit, remove field sigwait in pthread_wait_data,
  replace it with oldsigmask in pthread structure, when a thread calls
  sigwait(), its current signal mask is backuped to oldsigmask, and waitset
  is copied to its signal mask and when the thread gets a signal in the
  waitset range, its current signal mask is restored from oldsigmask,
  these are done in atomic fashion.

o Two additional POSIX APIs are implemented, sigwaitinfo() and sigtimedwait().

o Signal code locking is better than previous, there is fewer race conditions.

o Temporary disable most of code in _kse_single_thread as it is not safe
  after fork().
2003-06-28 09:55:02 +00:00
Daniel Eischen
a0240e2cb0 Revamp libpthread so that it has a chance of working in an SMP
environment.  This includes support for multiple KSEs and KSEGs.

The ability to create more than 1 KSE via pthread_setconcurrency()
is in the works as well as support for PTHREAD_SCOPE_SYSTEM threads.
Those should come shortly.

There are still some known issues which davidxu and I are working
on, but it'll make it easier for us by committing what we have.

This library now passes all of the ACE tests that libc_r passes
with the exception of one.  It also seems to work OK with KDE
including konqueror, kwrite, etc.  I haven't been able to get
mozilla to run due to lack of java plugin, so I'd be interested
to see how it works with that.

Reviewed by:	davidxu
2003-04-18 05:04:16 +00:00
Jonathan Mini
faa8342f9f Deliver signals posted via an upcall to the appropriate thread. 2003-02-17 10:05:18 +00:00
Jonathan Mini
cc118d869b Make the changes needed for libpthread to compile in its new home.
The new libpthread will provide POSIX threading support using KSE.
These files were previously repo-copied from src/lib/libc_r.

Reviewed by:	deischen
Approved by:	-arch
2002-09-16 08:45:36 +00:00
Daniel Eischen
88127f1a62 Make sigpending and sigsuspend account for signals that are pending on
the process as well as pending on the current thread.

Reported by:	Andrew MacIntyre <andymac@bullseye.apana.org.au>
2002-06-28 13:28:41 +00:00
Daniel Eischen
437df4859a To be consistent, use the __weak_reference macro from <sys/cdefs.h>
instead of #pragma weak to create weak definitions.

Suggested by:	bde
2001-04-10 04:19:21 +00:00
Daniel Eischen
e5106342c6 Add weak definitions for wrapped system calls. In general:
_foo - wrapped system call
	foo - weak definition to _foo

and for cancellation points:

	_foo - wrapped system call
	__foo - enter cancellation point, call _foo(), leave
	        cancellation point
	foo - weak definition to __foo

Change use of global _thread_run to call a function to get the
currently running thread.

Make all pthread_foo functions weak definitions to _pthread_foo,
where _pthread_foo is the implementation.  This allows an application
to provide its own pthread functions.

Provide slightly different versions of pthread_mutex_lock and
pthread_mutex_init so that we can tell the difference between
a libc mutex and an application mutex.  Threads holding mutexes
internal to libc should never be allowed to exit, call signal
handlers, or cancel.

Approved by:	-arch
2001-01-24 13:03:38 +00:00
Jason Evans
d77639f25f Use __strong_reference() instead of __weak_reference() to assure that the
weak symbols of the same name are not used.
2000-01-29 22:53:55 +00:00
Jason Evans
9233c4d942 Simplify sytem call renaming. Instead of _foo() <-- _libc_foo <-- foo(),
just use _foo() <-- foo().  In the case of a libpthread that doesn't do
call conversion (such as linuxthreads and our upcoming libpthread), this
is adequate.  In the case of libc_r, we still need three names, which are
now _thread_sys_foo() <-- _foo() <-- foo().

Convert all internal libc usage of: aio_suspend(), close(), fsync(), msync(),
nanosleep(), open(), fcntl(), read(), and write() to _foo() instead of foo().

Remove all internal libc usage of: creat(), pause(), sleep(), system(),
tcdrain(), wait(), and waitpid().

Make thread cancellation fully POSIX-compliant.

Suggested by:	deischen
2000-01-27 23:07:25 +00:00
Jason Evans
f560c4e709 Track libc's three-tier symbol naming. libc_r must currently implement
the _libc_*() entry points and add *() weak aliases.  This will all
change for the better when libc_r becomes libpthread.
2000-01-12 09:28:58 +00:00
Peter Wemm
7f3dea244c $Id$ -> $FreeBSD$ 1999-08-28 00:22:10 +00:00
Daniel Eischen
fa7c4d5575 Add RCS IDs to those files without them.
Fix copyrights (s/REGENTS/AUTHOR).

Suggested by:	tg
Approved by:	jb
1999-08-05 12:15:30 +00:00
John Birrell
58a7cc5d1b [ The author's description... ]
o Runnable threads are now maintained in priority queues.  The
    implementation requires two things:

      1.) The priority queues must be protected during insertion
          and removal of threads.  Since the kernel scheduler
          must modify the priority queues, a spinlock for
          protection cannot be used.   The functions
          _thread_kern_sched_defer() and _thread_kern_sched_undefer()
          were added to {un}defer kernel scheduler activation.

      2.) A thread (active) priority change can be performed only
          when the thread is removed from the priority queue.  The
          implementation uses a threads active priority when
          inserting it into the queue.

    A by-product is that thread switches are much faster.  A
    separate queue is used for waiting and/or blocked threads,
    and it is searched at most 2 times in the kernel scheduler
    when there are active threads.  It should be possible to
    reduce this to once by combining polling of threads waiting
    on I/O with the loop that looks for timed out threads and
    the minimum timeout value.

  o Functions to defer kernel scheduler activation were added.  These
    are _thread_kern_sched_defer() and _thread_kern_sched_undefer()
    and may be called recursively.  These routines do not block the
    scheduling signal, but latch its occurrence.  The signal handler
    will not call the kernel scheduler when the running thread has
    deferred scheduling, but it will be called when running thread
    undefers scheduling.

  o Added support for _POSIX_THREAD_PRIORITY_SCHEDULING.  All the
    POSIX routines required by this should now be implemented.
    One note, SCHED_OTHER, SCHED_FIFO, and SCHED_RR are required
    to be defined by including pthread.h.  These defines are currently
    in sched.h.  I modified pthread.h to include sched.h but don't
    know if this is the proper thing to do.

  o Added support for priority protection and inheritence mutexes.
    This allows definition of _POSIX_THREAD_PRIO_PROTECT and
    _POSIX_THREAD_PRIO_INHERIT.

  o Added additional error checks required by POSIX for mutexes and
    condition variables.

  o Provided a wrapper for sigpending which is marked as a hidden
    syscall.

  o Added a non-portable function as a debugging aid to allow an
    application to monitor thread context switches.  An application
    can install a routine that gets called everytime a thread
    (explicitly created by the application) gets context switched.
    The routine gets passed the pthread IDs of the threads that are
    being switched in and out.

Submitted by: Dan Eischen <eischen@vigrid.com>

Changes by me:

  o Added a PS_SPINBLOCK state to deal with the priority inversion
    problem most often (I think) seen by threads calling malloc/free/realloc.

  o Dispatch signals to the running thread directly rather than at a
    context switch to avoid the situation where the switch never occurs.
1999-03-23 05:07:56 +00:00