When run() returns an error, print the error message also in
non-interactive mode. Previously error messages were printed only in
interactive mode.
PR: bin/124517
Approved by: trasz (mentor)
SVN r197174:
Make sure we never place the cursor outside the screen.
For some vague reason, it may be possible that scp->cursor_pos exceeds
scp->ysize * scp->xsize. This means that teken_set_cursor() may get
called with an invalid position. Just ignore the old cursor position in
this case.
Reported by: Paul B. Mahol <onemda gmail com>
SVN r198213:
Make lock devices work properly.
It turned out I did add the code to use the init state devices to set
the termios structure when opening the device, but it seems I totally
forgot to add the bits required to force the actual locking of flags
through the lock state devices.
Reported by: ru
SVN r198215, r198217:
Fix a typo in the jail(8) manpage.
Submitted by: Jille Timmermans <jille quis cx>
SVN r198216:
Fix qouting in a comment, to make it look more consistent
Submitted by: Jille Timmermans <jille quis cx>
SVN r198223:
Properly set the low watermarks when reducing the baud rate.
Now that buffers are deallocated lazily, we should not use
tty*q_getsize() to obtain the buffer size to calculate the low
watermarks. Doing this may cause the watermark to be placed outside the
typical buffer size.
This caused some regressions after my previous commit to the TTY code,
which allows pseudo-devices to resize the buffers as well.
Reported by: yongari, dougb
- Use the headers from ACPI-CA to define various constants and structures
for table layouts, etc. rather than homerolling our own structures and
constants in acpidump.h.
- Verify the extended checksum on the RSDP.
- Handle new ACPI 3.0 fields in MADT including X2APIC entries and
UIDs for local SAPICs.
- Add handling for new ACPI 3.0 flags in the FADT.
- Add AS lookup functionality to traceroute6(8) as well.
- Support for IPv6 transport for AS lookup.
- Introduce $RA_SERVER to set whois server.
- Support for 4 byte ASN.
- ANSIfy function declaration in as.c.
Approved by: re (kib)
In the NEXTADDR macro use SA_SIZE() rather than directly using
sizeof(), as introduced in r186119, for advancing the current
position into the buffer.
See comment in net/route.h for a description of the difference.
This makes ndp -s work again.
Reviewed by: qingli
Approved by: re (kib)
create stdin and stdout, don't blindly try to use stdin as a bi-directional
channel. Instead, detect the pipe and set up a special exec handler
that indirects write() calls through stdout.
This fixes the problem where ``set device "!ssh -e none host ppp
-direct label"'' no longer works with an openssh-5.2 server side as
that version of openssh ignores the USE_PIPES config setting and
*always* uses pipes (rather than socketpair) for stdin/stdout channels.
Approved by: re (kib)
Enable _DIRENT_HAVE_D_TYPE so wpa_cli scans directories properly
for it's unix domain socket. Before this change wpa_cli would take
the first file in the directory that was not "." or "..".
Approved by: re (rwatson)
Add support for backing up the old kernel when installing a new kernel
using freebsd-update. This applies to using freebsd-update in "upgrade
mode" and normal freebsd-update on a security branch.
The backup kernel will be written to /boot/kernel.old, if the directory
does not exist, or the directory was created by freebsd-update in a
previous backup. Otherwise freebsd-update will generate a new directory
name for use by the backup. By default symbol files are not backed up
to save diskspace and avoid filling up the root partition.
This feature is fully configurable in the freebsd-update config file,
but defaults to enabled.
Reviewed by: cperciva
Approved by: re (kib)
Prevent sysinstall from needlessly waiting for confirmation when using an USB
device in non-interactive mode.
If there are no USB devices, sysinstall gives an error messages, and if there
is >1, it'll ask which one is to be used. This change allows a non-interactive
install from USB media to succeed without any user interaction if there is
exactly one USB disk device in the system it can use.
Submitted by: Daniel O'Connor < doconnorat gsoft dot com dot au >
Reviewed by: randi
Approved by: re (rwatson)
The columns for tty input and output may bump against each other
if the tty output needs more than 5 columns. Add a bit of space
that pushes everything 1 column to the right, but also avoids the
problem.
Approved by: re (rwatson)
Avoid overflowing the swap size counters in human-readable mode
by introducing the new CONVERT_BLOCKS macro which operates on
sizes already converted to number of blocks. With this macro
it is not longer needed to perform needless multiplica
Approved by: re (kib)
Do not truncate IPv6 addresses when printing them in the
jls -av 7.x multi-IP jail backward compat output.
Reported by: ed
Tested by: ed
Reviewed by: rwatson
Approved by: re
parameter unless a (numeric) IPv6 address is given. Even the default
binaries built with -DINET6 will work with IPv6-less kernels. With an
eye to the future, similarly handle the possibility of an IPv4-less kernel.
Approved by: re (kib), bz (mentor)
restrictions) were found to be inadequately described by a boolean.
Define a new parameter type with three values (disable, new, inherit)
to handle these and future cases.
Approved by: re (kib), bz (mentor)
Discussed with: rwatson
to 'Expert Mode', to make it less confusing to new users, to whom
a 'wizard' is a set of simple dialogs with the 'next >>>' button.
Approved by: re (kensmith)
both the disk partitioning screen (the 'F' key) and via install.cfg (the
VAR_DEDICATED_DISK option). This functionality is currently broken in 8.x
due to libdisk and geom generating different partition names; this commit
merely acts to help steer users away from the breakage.
Submitted by: randi
Approved by: re (kensmith)
preparation for 8.0-RELEASE. Add the previous version of those
libraries to ObsoleteFiles.inc and bump __FreeBSD_Version.
Reviewed by: kib
Approved by: re (rwatson)
While doing so, improve style and reword some comments.
This should not result in any functional changes, but the fixit_livefs_common
function will be used by future code.
Submitted by: randi
Approved by: re (kensmith)
adjusting the clock to UTC.
That avoids to write on /etc/wall_cmos_clock which is useful in some
cases (example: host user in a jail).
Sponsored by: Sandvine Incorporated
Initially submitted by: Matt Koivisto <mkoivisto at sandvine dot com>
Approved by: re (kib)
always started from the start of the packet.
- Fix usage string (multiple addresses can be specified).
- Make the source more style(9) compliant.
- Improve error reporting (do not silently fail if something goes
wrong).
- Make functions static.
- Use warns level 6.
Approved by: re (kib)
Discussed with: Marc Balmer <marc@msys.ch>, brian, mbr
Submitted by: Marc Balmer <marc@msys.ch>
Reviewed by: rwatson
Approved by: re
M usr.sbin/Makefile
A usr.sbin/wake
AM usr.sbin/wake/wake.c
AM usr.sbin/wake/Makefile
AM usr.sbin/wake/wake.8
via cpuctl(4) driver. Two new CPUCTL_MSRSBIT and CPUCTL_MSRCBIT ioctl(2)
calls treat the data field of the argument struct passed as a mask
and set/clear bits of the MSR register according to the mask value.
- Allow user to perform atomic bitwise AND and OR operaions on MSR registers
via cpucontrol(8) utility. Two new operations ("&=" and "|=") have been
added. The first one applies bitwise AND operaion between the current
contents of the MSR register and the mask, and the second performs bitwise
OR. The argument can be optionally prefixed with "~" inversion operator.
This allows one to mimic the "clear bit" behavior by using the command
like this:
cpucontrol -m 0x10&=~0x02 # clear the second bit of TSC MSR
Inversion operator support in all modes (assignment, OR, AND).
Approved by: re (kib)
MFC after: 1 month
FreeBSD docset during 'make release' this will speed up release
builds;
- sysinstall(8) has also been updated to use these packages with a new
menu allowing people to choose what localized doc to install;
- mention in UPDATING that docs from the FreeBSD Documentation project
are now installed in /usr/local/share/doc/freebsd instead of
/usr/share/doc.
Approved by: re (kensmith)
insisting on privileged port access.
Include /var/yp/Makefile.local if it exists and suggest using
it to override /var/yp/Makefile behaviour.
Approved by: re (kib)
MFC after: 3 weeks
A fresh install of a current 8.0 snapshot uses 156MB with a single kernel
and having the filesystem too small prevented the system from booting.
Reviewed by: marcel
MFC after: 1 week
This covers the common case of unsliced USB drives, and makes it possible to
select them as installation source media.
PR: 61152, 115197, 135016
Submitted by: randi
MFC after: 1 month
meant primarily for _non_ interactive use. Scripts that run cxgbtool
repeatedly to perform register r/w or mdio will benefit from this.
Instead of fork/exec'ing a new cxgbtool for every regio/mdio you can
simply open a pair of pipes to/from cxgbtool and run cmds over them.
Approved by: gnn (mentor)
The kernel does not log floppy media errors anymore.
In fdcontrol, do always open the file descriptor in read-only mode so
it can operate on read-only media, as there is no longer a separate
control device to operate on.
about a queue from a remote host. That remote host may use \r, \r\n,
or \n\r as the line-ending character. In some cases the remote host
will write a single line of information without *any* EOL sequence.
Translate all the non-unix EOL's to the standard newline, and make
sure the final line includes a terminating newline. Logic is also
added to translate all unprintable characters to '?', but that is
#if-ed out for now.
PR: bin/104731
MFC after: 3 weeks
allocates data structures that are never linked into the tree or free'd.
As such, mountd would leak memory every time it parsed an nfsv4 root line.
This patch frees up those structures to plug the leak.
Approved by: kib (mentor)
NGROUPS_MAX, eliminate ABI dependencies on them, and raise the to 1024
and 1023 respectively. (Previously they were equal, but under a close
reading of POSIX, NGROUPS_MAX was defined to be too large by 1 since it
is the number of supplemental groups, not total number of groups.)
The bulk of the change consists of converting the struct ucred member
cr_groups from a static array to a pointer. Do the equivalent in
kinfo_proc.
Introduce new interfaces crcopysafe() and crsetgroups() for duplicating
a process credential before modifying it and for setting group lists
respectively. Both interfaces take care for the details of allocating
groups array. crsetgroups() takes care of truncating the group list
to the current maximum (NGROUPS) if necessary. In the future,
crsetgroups() may be responsible for insuring invariants such as sorting
the supplemental groups to allow groupmember() to be implemented as a
binary search.
Because we can not change struct xucred without breaking application
ABIs, we leave it alone and introduce a new XU_NGROUPS value which is
always 16 and is to be used or NGRPS as appropriate for things such as
NFS which need to use no more than 16 groups. When feasible, truncate
the group list rather than generating an error.
Minor changes:
- Reduce the number of hand rolled versions of groupmember().
- Do not assign to both cr_gid and cr_groups[0].
- Modify ipfw to cache ucreds instead of part of their contents since
they are immutable once referenced by more than one entity.
Submitted by: Isilon Systems (initial implementation)
X-MFC after: never
PR: bin/113398 kern/133867
package rather than expecting our top level package to get all of
the dependencies correct.
Previously, the code depended on the top level package having all
of the pkgdep lines in +CONTENTS correct and in the right order,
but that doesn't always happen due to code such as this (in
security/gnutls/Makefile):
.if (defined(WITH_LZO) || exists(${LOCALBASE}/lib/liblzo2.so)) && !defined(WITHOUT_LZO)
LIB_DEPENDS+= lzo2:${PORTSDIR}/archivers/lzo2
....
With such conditional dependencies, my 'sophox-packages' package won't
install. The dependency tree looks like this:
sophox-packages
...
x11/gnome2
x11/gnome-applets
net/libgweather
devel/libsoup
security/gnutls
security/libgcrypt
security/libgpg-error
...
x11/gnome2
archivers/file-roller
archivers/gtar
archivers/lzop
archivers/lzo2
...
gnutls doesn't depend on lzo2 initially, but lzo2 is dragged into the
mix via other dependencies and is built by the initial 'make'. The
subsequent package generation for gnutls adds a pkgdep line for lzo2
to gnutls' +CONTENTS but the pkgdeps in sophox-packages' +CONTENTS
has gnutls *before* lzo2.
As a result, sophox-packages cannot install; gnutls fails because lzo2
is missing, 82 more packages fail because gnutls is missing and the
whole thing spirals into a super-confusing mess!
MFC after: 3 weeks
system callers of getgroups(), getgrouplist(), and setgroups() to
allocate buffers dynamically. Specifically, allocate a buffer of size
sysconf(_SC_NGROUPS_MAX)+1 (+2 in a few cases to allow for overflow).
This (or similar gymnastics) is required for the code to actually follow
the POSIX.1-2008 specification where {NGROUPS_MAX} may differ at runtime
and where getgroups may return {NGROUPS_MAX}+1 results on systems like
FreeBSD which include the primary group.
In id(1), don't pointlessly add the primary group to the list of all
groups, it is always the first result from getgroups(). In principle
the old code was more portable, but this was only done in one of the two
places where getgroups() was called to the overall effect was pointless.
Document the actual POSIX requirements in the getgroups(2) and
setgroups(2) manpages. We do not yet support a dynamic NGROUPS, but we
may in the future.
MFC after: 2 weeks
dace for UPDv4 sockets bound to INADDR_ANY. Move the code to set
IP_RECVDSTADDR/IP_SENDSRCADDR into svc_dg.c, so that both TLI and non-TLI
users will be using it.
Back out my previous commit to mountd. Turns out the problem was affecting
more than one binary so it needs to me addressed in generic rpc code in
libc in order to fix them all.
Reported by: lstewart
Tested by: lstewart
choice of variable names for rc.conf and option name for the
experimental server.
Also replace the inaccurate description of the nfsv4 root lines
in /etc/exports, mostly with a reference to exports(5).
Approved by: kib (mentor)
