Add a missing riscv.h header file, and fix the check for riscv (must test
MACHINE_CPUARCH, not MACHINE_ARCH, if we want to use 'riscv').
Sponsored by: Axiado
of how it works when not compiled with OpenSSL.
Also, allow users to specify a hexadecimal number by using a prefix of
'0x'. Before this, users could only specify a hexadecimal value if that
value included a hex digit ('a'-'f') in the value.
PR: 243136
Submitted by: Steve Kargl
Reviewed by: gad
MFC after: 3 weeks
r356242 updated nfsstat.c to report that the "-M" and "-N" options were
being ignored. These options have never had any meaning for the new NFS
code (which is now the only NFS code).
This patch updates the man page to reflect this.
This is a content change.
The "-M" and "-N" options for nfsstat were used by the old NFS code and
have never done anything for the new NFS code.
This patch replaces code that assigns values to variables that are never
used with printf()s noting the options are ignored.
This has the side effect that it gets rid of warnings w.r.t. these
variables being assigned but never used, that occur for some builds.
Noticed during integration of the NFSv4.2 code.
Prior to this patch, nfsstat.c includes files from sys/nfs, sys/nfsclient
and sys/nfsserver. These .h files (particularily the ones in sys/nfsclient
and sys/nfsserver) are from the old NFS code and should eventually be
deprecated/removed.
This patch changes nfsstat.c to include files from the new/current NFS
code instead of the old ones in preparation for eventual removal.
Update libarchive to 3.4.1
Relevant vendor changes since last update:
Issue #351: Refactor and implement private state logic for write filters
PR #1252: RAR5 reader - verify window size for solid files (OSS-Fuzz 15482)
PR #1255: zip writer - don't append unused NUL for directories
PR #1260: Fix sparse file offset overflow on 32-bit systems
PR #1263: UNICODE filename support for reading lha/lzh format
Issue #1276: Bugfix and optimize archive_wstring_append_from_mbs()
PR #1288: Add the "xattrhdr" option to pax write options
PR #1295: 7z reader - fix reading archives with digests in PackInfo
PR #1296: RAR5 reader - verify window size for multivolume archives
PR #1297: ZIP reader - support LZMA_STREAM_END marker in 'lzma alone' files
Issue #1298: Fix a heap-buffer-overflow in archive_string_append_from_wcs()
OSS-Fuzz 19360, 19362: LHA reader - plug two memory leaks on error
Fix possible off-by-one when dealing with readlink(2)
MFC after: 2 weeks
r355992 added listing of NFSv4.2 procedure and operation counts.
This patch updates the nfsstat.1 man page to reflect that change.
This is a content change.
r355677 added NFSv4.2 support to the NFS client and server. It also updated
the nfsstats structure to keep counts for the new procedures (client) and
operations (server) added for NFSv4.2.
This patch updates the "-E" option of nfsstat so that it lists counts for
these new procedures and operations.
This uses the new layout of the upstream repository, which was recently
migrated to GitHub, and converted into a "monorepo". That is, most of
the earlier separate sub-projects with their own branches and tags were
consolidated into one top-level directory, and are now branched and
tagged together.
Updating the vendor area to match this layout is next.
- Move libxo.a build to subdirectory (lib/libxo/libxo/Makefile)
- Add .WAIT target to delay encoder build til after libxo
- Use FILES to install encoder library as csv.enc
- Update import script to put xo_config.h in new location
This adds a new -D/--all-repeats option to uniq(1), which outputs each copy
of any repeated lines (as opposed to a single copy of a repeated line). You
can specify a separator option to output a blank line before or after each
group of repeated lines. This adds compatibility with the GNU coreutils
version of uniq(1).
This change also re-groups the -c, -d, -D, -u options in the usage display
and man page to indicate that they are mutally exclusive of each other. This
matches the posix/opengroup definition of uniq(1) command line args. Note
that this change does NOT actually enforce the mutual exclusion in the code,
for now, it simply documents that the arguments should be considered
exclusive with each other.
Differential Revision: https://reviews.freebsd.org/D22262
statistics obtained with stats(3) in JSON format to standard error.
Reviewed by: allanjude, thj, cem (earlier version)
Tested by: thj
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D21324
This program is trash and there's no reason to keep it in base. But as long as
we're shipping a silly program named 'random', let's actually make it random.
add long options support to showmount. Where mappings exist use the GNU
names for said options.
Differential Revision: https://reviews.freebsd.org/D22543
Reviewed by: kevans (earlier version)
Update a bunch of Makefile.depend files as
a result of adding Makefile.depend.options files
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22494
Leaf directories that have dependencies impacted
by options need a Makefile.depend.options file
to avoid churn in Makefile.depend
DIRDEPS for cases such as OPENSSL, TCP_WRAPPERS etc
can be set in local.dirdeps-options.mk
which can add to those set in Makefile.depend.options
See share/mk/dirdeps-options.mk
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22469
This is both reasonable and a common GNUism that a lot of ported software
expects.
Universally process \r, \n, and \t into carriage return, newline, and tab
respectively. Newline still doesn't function in contexts where it can't
(e.g. BRE), but we process it anyways rather than passing
UB \n (escaped ordinary) through to the underlying regex engine.
Adding a --posix flag to disable these was considered, but sed.1 already
declares this version of sed a super-set of POSIX specification and this
behavior is the most likely expected when one attempts to use one of these
escape sequences in pattern space.
This differs from pre-r197362 behavior in that we now honor the three
arguably most common escape sequences used with sed(1) and we do so outside
of character classes, too.
Other escape sequences, like \s and \S, will come later when GNU extensions
are added to libregex; sed will likely link against libregex by default,
since the GNU extensions tend to be fairly un-intrusive.
PR: 229925
Reviewed by: bapt, emaste, pfg
Differential Revision: https://reviews.freebsd.org/D22750
Routing statistics requires somes symbols that are only loaded when not running
live. Load them only in that specific case
PR: 242423
Submitted by: olivier
MFC after: 3 days
We were not adding CAP_EVENT to input file capabilities, so kevent()
always failed with ENOTCAPABLE. tail implements a fallback mode to
poll the file in this case, so the failure was not apparent.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22709
unifdef(1): Improve worst-case bound on symbol resolution
Use RB_TREE to make some algorithms O(lg N) and O(N lg N) instead of O(N)
and O(N^2).
While here, remove arbitrarily limit on number of macros understood.
Reverts r354877 and r354878, which disabled the (correct) test.
PR: 242095
Reported by: lwhsu
Use RB_TREE to make some algorithms O(lg N) and O(N lg N) instead of O(N)
and O(N^2). Because N is typically small and the former linear array also has
great constant factors (as a property of CPU caching), this doesn't provide
material benefit most or all of the time.
While here, remove arbitrarily limit on number of macros understood.
Otherwise small quantities look nonsensical. For instance, when
swapping in a single page we would print "4096 In".
Fix code indentation while here.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The igmp stats tend to print two lines of warning for an unexpected
version and length. Despite an invalid version and struct size it
continues to try to do something with the data. Do not try to parse
the remainder of the struct and error on warning.
Note the underlying issue of the data not being available properly
is still there and needs to be fixed seperately.
Reported by: test cases, lwhsu
MFC after: 3 weeks
The code for "netstat -gs -f inet" failed if the kernel namelist did not
include the _mrtstat symbol. However, that symbol is not in a standard
kernel even with the ip_mroute module loaded, where the functionality is
available. It is also not in a kernel with MROUTING but also VIMAGE, as
there can be multiple sets of stats. However, when running the command
on a live system, the symbol is not used; a sysctl is used. Go ahead
and try the sysctl in any case, and complain that IPv4 MROUTING is not
present only if the sysctl fails with ENOENT. Also fail if _mrtstat is
not defined when running on a core file; netstat doesn't know about vnets,
so can only work if MROUTING was included, and VIMAGE was not.
Reviewed by: bz
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22311
If cu reads an EOF on the input side, it goes into a tight loop
sending a garbage byte to the remote. With this change, it exits
gracefully, along with its child.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
The few columns that are not humanized are usually 0. This makes
the output mostly aligned.
Reviewed by: allanjude
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22185
Alter bsd.compat.mk to set MACHINE and MACHINE_ARCH when included
directly so MD paths in Makefiles work. In the process centralize
setting them in LIBCOMPATWMAKEENV.
Alter .PATH and CFLAGS settings in work when the Makefile is included.
While here only support LIB32 on supported platforms rather than always
enabling it and requiring users of MK_LIB32 to filter based
TARGET/MACHINE_ARCH.
The net effect of this change is to make Makefile.libcompat only build
compatability libraries.
Changes relative to r354449:
Correct detection of the compiler type when bsd.compat.mk is used
outside Makefile.libcompat. Previously it always matched the clang
case.
Set LDFLAGS including the linker emulation for mips where -m32 seems to
be insufficent.
Reviewed by: imp, kib (origional version in r354449)
Obtained from: CheriBSD (conceptually)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22251
With the -0 option added to ENV(1), some ports will no longer require genv
from sysutils/coreutils.
Reviewed by: kevans (prior version), swills
Approved by: bcr (manpages), imp
Differential Revision: https://reviews.freebsd.org/D22230
Alter bsd.compat.mk to set MACHINE and MACHINE_ARCH when included
directly so MD paths in Makefiles work. In the process centralize
setting them in LIBCOMPATWMAKEENV.
Alter .PATH and CFLAGS settings in work when the Makefile is included.
While here only support LIB32 on supported platforms rather than always
enabling it and requiring users of MK_LIB32 to filter based
TARGET/MACHINE_ARCH.
The net effect of this change is to make Makefile.libcompat only build
compatability libraries.
Reviewed by: imp, kib
Obtained from: CheriBSD (conceptually)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22251
- move from "oxtradoc" to RST/Sphinx documentation
- new "csv" encoder, which allows path and leaf lists
- address warnings from PVS-Stdio tool
- add "xolint" detected errors to the documentation
We have a bad habit of duplicating contents of files that are sourced from
/dev/null and applied more than once... take the more sane (in most ways)
GNU route and complain if the file exists and offer reversal options.
This still falls short a little bit as selecting "don't reverse, apply
anyway" will still give you duplicated file contents. There's probably other
issues as well, but awareness is the first step to happiness.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21535
