- make NDIS_DEBUG a sysctl
- default to IEEE80211_MODE_11B if the card doesnt tell us the channels
- dont mess with ic_des_chan when we assosciate
- Allow a directed scan by setting the ESSID before scanning (verified
with wireshark). Hidden APs probably wouldnt have worked before.
- Grab the channel type and use it to look up the correct curchan for
the scan results (mistakenly used 11B before)
- Fix memory leak in the ndis_scan_results
Tested by: matteo
Reviewed by: sam
Approved by: re (rwatson)
stack overflow in complicated traffic filtering setups.
There can be minor performance degradation for the MHLEN < len <= 256 case
due to additional buffer allocation, but it is a rare case.
Approved by: re (rwatson), glebius (mentor)
MFC after: 1 week
value, then we would use a negative index into the trap_msg[] array
resulting in a nested page fault. Make the 'type' variable holding the
trap number unsigned to avoid this.
MFC after: 2 weeks
Approved by: re (rwatson)
to repeat if you had more than two keys down at any given time (which
happened to me all the time with emacs).
This is taken from PR 110681, although what URATAN Shigenobu describes
there is different than the pathology that I have been seeing. I'm
seeing this only in X, while he sees it on his console, yet I think
the two problems are related. I've also reworked the patch slightly
to conform to the coding standards of adjacent code.
It is unclear to me if this merely masks the maddening bug that I have
seen, or if this is a real fix. I typically see the problem when I'm
typing fast in emacs and using lots of motion keys (meta and control).
In either case, my workstation at work again is finally useful with
this patch.
PR: 110681
Submitted by: URATAN Shigenobu
Approved by: re (blanket)
the protocol to be report on each open, but ignore any errors as set
protocol for mice that don't implement the boot protocol can generate
an error. Evidentally, the Gyration GyroPoint RF Technology Receiver
(Gyration Ultra Cordless) device has this problem.
Submitted by: Eugene M. Kim
PR: 106565
Approved by: re (blanket)
- Fix addrs's error checking of sctp_sendx(3) when addrcnt is less than
SCTP_SMALL_IOVEC_SIZE
- re-add back inpcb_bind local address check bypass capability
- Fix it so sctp_opt_info is independant of assoc_id postion.
- Fix cookie life set to use MSEC_TO_TICKS() macro.
- asconf changes
o More comment changes/clarifications related to the old local address
"not" list which is now an explicit restricted list.
o Rename some functions for clarity:
- sctp_add/del_local_addr_assoc to xxx_local_addr_restricted()
- asconf related iterator functions to sctp_asconf_iterator_xxx()
o Fix bug when the same address is deleted and added (and removed from
the asconf queue) where the ifa is "freed" twice refcount wise,
possibly freeing it completely.
o Fix bug in output where the first ASCONF would not go out after the
last address is changed (e.g. only goes out when retransmitted).
o Fix bug where multiple ASCONFs can be bundled in the same packet with
the and with the same serial numbers.
o Fix asconf stcb iterator to not send ASCONF until after all work
queue entries have been processed.
o Change behavior so that when the last address is deleted (auto asconf
on a bound all endpoint) no action is taken until an address is
added; at that time, an ASCONF add+delete is sent (if the assoc
is still up).
o Fix local address counting so that address scoping is taken into
account.
o #ifdef SCTP_TIMER_BASED_ASCONF the old timer triggered sending
of ASCONF (after an RTO). The default now is to send
ASCONF immediately (except for the case of changing/deleting the
last usable address).
Approved by: re(ken smith)@freebsd.org
This fixes tmpfs caculations on 32-bit systems equipped with more than
4GB swap.
Reported by: Craig Boston <craig xfoil gank org>
PR: kern/114870
Approved by: re (tmpfs blanket)
included man pages on how to use it. This code is still somewhat experimental
but has been successfully tested on a number of targets. Many thanks to
Danny for contributing this.
Approved by: re
Ever since switching to adaptive polling re(4) occasionally spews
watchdog timeouts on systems with MSI capability. This change is
minimal one for supporting MSI and re(4) also needs MSIX support
for RTL8111C in future. Because softc structure of re(4) is shared
with rl(4), rl(4) was touched to use the modified softc.
Reported by: cnst
Tested by: cnst
Approved by: re (kensmith)
Because nfe(4) hardware doesn't support SG on Rx path, supporting
jumbo frame requires very large contiguous kernel memory(i.e. several
mega bytes). In case of lack of contiguous kernel memory that
allocation request may always fail. However nfe(4) can operate on normal
sized MTU frames, so go ahead and just disable jumbo frame support.
While I'm here add a new tunable "hw.nfe.jumbo_disable" to disable
jumbo frame support.
In nfe_poll, make sure to invoke correct Rx handler.
Approved by: re (kensmith)
results unused; this, with -Werror option of gcc, rise a warning for gcc
which let the buildkernel to be busted.
Fix this removing upcall_free().
Reported by: various
Approved by: jeff
Approved by: re
Pointy hat to: attilio
dangerous races.
Fix this problems adding correct locking for the members of 'struct
kse_upcall' and other struct proc/struct thread related members.
For the moment, just leave ku_mflag and ku_flags "lazy" locked.
While here, cleanup the code removing the function kse_GC() (unused),
and merging upcall_link(), upcall_unlink(), upcall_stash() in their
respective callers (static functions, very short and only called in one
place).
Reported by: pav
Tested by: pav (on some pointyhat cluster nodes)
Approved by: jeff
Approved by: re
Sponsorized by: NGX Italy (http://www.ngx.it)
vnode label for a check rather than the directory vnode label a second
time.
MFC after: 3 days
Submitted by: Zhouyi ZHOU <zhouzhouyi at FreeBSD dot org>
Reviewed by: csjp
Sponsored by: Google Summer of Code 2007
Approved by: re (bmah)
print a one line error message. Add some comments on not being able to
trust the day of week field (I'll act on these comments in a follow up
commit).
Approved by: re
MFC after: 3 weeks
udp6_output() from udp6_output.c to udp6_usrreq.c, matching the UDPv4
structure, and allowing us to remove udp6_output.c.
Reviewed by: bz, gnn
Approved by: re (bmah)
o Initialize ownerships and permissions. They were garbage (0) for
root mounts since vfs_mountroot_try() doesn't ask for them to be set
and msdosfs's old incomplete code to set them was removed. The
garbage happened to give the correct ownerships root:wheel, but it
gave permissions 000 so init could not be execed. Use the macros
for root: wheel and 0755. (The removed code gave 0:0 and 0777. 0755
is more normal and secure, thought wrong for /tmp.)
o Check the readonly flag for initial (non-MNT_UPDATE) mounts in the
correct place, as in ffs. For root mounts, it is only passed in
mp->mnt_flags, since vfs_mountroot_try() only passes it as a flag
and nothing translates the flag to the "ro" option string. msdosfs
only looked for it in the string, so it gave a rw mount for root
mounts without even clearing the flag in mp->mnt_flags, so the final
state was inconsistent. Checking the flag only in mp->mnt_flags
works for initial userland mounts too. The MNT_UPDATE case is
messier.
The main point that should work but doesn't is fsck of msdosfs root
while it is mounted ro. This needs mainly MNT_RELOAD support to work.
It should be possible to run fsck -p and succeed provided the fs is
consistent, not just for msdosfs, but this fails because fsck -p always
tries to open the device rw. The hack that allows open for writing
in ffs is not implemented in msdosfs, since without MNT_RELOAD support
writing could only be harmful. So fsck must be turned off to use
msdosfs as root. This is quite dangerous, since msdosfs is still missing
actually using its fs-dirty flag internally, so it is happy to mount
dirty fileystems rw.
Unrelated changes:
- Fix missing error handling for MNT_UPDATE from rw to ro.
- Catch up with renaming msdos to msdosfs in a string.
Approved by: re (kensmith)
physical memory pages into account for tm_maxfilesize.
Reported by: Dominique Goncalves <dominique.goncalves gmail.com>
Submitted by: Howard Su
Approved by: re (tmpfs blanket)
consumers.
This patch makes KSE no more an optionally stub for kernel structures
fixing the breakage.
As a tail note, this bug has broken kqemu for a long period now.
Tested by: Ulf Lilleengen <lulf@FreeBSD.org>
Discussed with: rwatson, jeff
Approved by: jeff (mentor)
Approved by: re
be woken up by kthread_exit. This is racey and in some cases the kthread will
exit before ndis gets around to sleep so it will be stuck indefinitely. This
change reuses the kq_exit variable to indicate that the thread has gone and
will loop on tsleep with a timeout waiting for it. If the kthread has already
exited then it will not sleep at all.
Approved by: re (rwatson)
advancing. Read from the timer before attaching to be sure it advances
in 1 us. Since the slowest rate allowed by the spec is 10 MHz, the
timer is guaranteed to change in this interval if it is working.
Tested by: Rui Paulo
Approved by: re
MFC after: 3 days
- Synchronized audit event list to Solaris, picking up the *at(2) system call
definitions, now required for FreeBSD and Linux. Added additional events
for *at(2) system calls not present in Solaris.
Obtained from: TrustedBSD Project
Approved by: re (hrs)
- remove duplicate #include <sys/priv.h> that is not under
#ifdef FreeBSD version to allow compile on 6.1
- static analysis changes per the cisco SA tool including:
o some SA_IGNORE comments
o some checks for NULL before unlock.
o type corrections int -> size_t
- Fix it so sctp_alloc_asoc takes a thread/proc argument. Without this
we pass a NULL in to bind on implicit assoc setup and crash :-(
Approved by: re@freebsd.org(Ken Smith)
4KB pages as i386, data structures that just fit in one page on i386 (and
on 64 bit architectures with 8KB pages) can be distributed over two pages
on amd64. This is a porblem in the case of the Symbios driver, since the
SCRIPTS engine in the SCSI chip operates on physical addresses and needs
physically contiguous memory. Earlier patches used contigmalloc on amd64,
but this version replaces part of a structure by a pointer to that data.
In order to not introduce an extra indirection for other architectures,
the change has been made conditional on __amd64__.
Earlier attempts to repair this problem are removed (i.e. the macros that
made amd64 use contigmalloc). The fix was submitted by Jan Mikkelsen and
modified by me to only affect amd64.
PR: 89550
Submitted by: janm at transactionware dot com (Jan Mikkelsen)
Approved by: re (Hiroki Sato)
MFC after: 2 weeks
This gives a very large speedup for small block sizes (in my tests,
about 5 times for write and 3 times for read with a block size of 512,
if clustering is possible) and a moderate speedup for the moderatatly
large block sizes that should be used on non-small media (4K is the
best size in most cases, and the speedup for that is about 1.3 times
for write and 1.2 times for read). mmap() should benefit from clustering
like read()/write(), but the current implementation of vm only supports
clustering (at least for getpages) if the fs block size is >= PAGE SIZE.
msdosfs is now only slightly slower than ffs with soft updates for
writing and slightly faster for reading when both use their best block
sizes. Writing is slower for msdosfs because of more sync writes.
Reading is faster for msdosfs because indirect blocks interfere with
clustering in ffs.
The changes in msdosfs_read() and msdosfs_write() are simpler merges
of corresponding code in ffs (after fixing some style bugs in ffs).
msdosfs_bmap() needs fs-specific code. This implementation loops
calling a lower level bmap function to do the hard parts. This is a
bit inefficient, but is efficient enough since msdsfs_bmap() is only
called when there is physical i/o to do.
Approved by: re (hrs)
In msdosfs_read(), mainly reorder the main loop to the same order as in
ffs_read().
In msdosfs_write() and extendfile(), use vfs_bio_clrbuf() instead of
clrbuf(). I think this just just a bogus optimization, but ffs always
does it and msdosfs already did it in one place, and it is what I've
tested.
In msdosfs_write(), merge good bits from a comment in ffs_write(), and
fix 1 style bug.
In the main comment for msdosfs_pcbmap(), improve wording and catch
up with 13 years of changes in the function. This comment belongs in
VOP_BMAP.9 but that doesn't exist.
In msdosfs_bmap(), return EFBIG if the requested cluster number is out
of bounds instead of blindly truncating it, and fix many style bugs.
Approved by: re (hrs)
11b channel is not found, e.g. Atheros 5211.
Reported by: matteo
Problem outlined by: thompsa
Reviewed by: sam, thompsa
Approved by: re (kensmith), sam (mentor)
Tested by: matteo (an early version)
We allocate coda_ctlvp when /coda is mounted, but never release it.
During the unmount this vnode was marked as UNMOUNTING and when venus
is started a second time the system would hang, possibly waiting for
the old vnode to disappear.
So now we call vrele on the control vnode when file system is unmounted
to drop the reference we got during the mount. I'm pretty sure it is
also necessary to not skip the handling in coda_inactive for the control
vnode, it seems like that is the place we actually get rid of the vnode
once the refcount has dropped to 0.
Submitted by: Jan Harkes <jaharkes at cs dot cmu dot edu>
Approved by: re (kensmith)
filt_ttyrdetach() etc would later attempt to dereference cdev->si_tty,
causing a 0xdeadc0de dereference. Change kn_hook value from cdev to
struct tty to avoid dereferencing freed cdev.
In ttygone(), wake up select(), sigio and kevent() users in addition
to the queue sleepers.
Return EV_EOF from kevent filters if TS_GONE is set.
Submitted by: peter
Tested by: Peter Holm
Approved by: re (kensmith)
MFC after: 2 weeks
- Adjust lock_profiling stubs semantic in the hard functions in order to be
more accurate and trustable
- As for sx locks, disable shared paths for lock_profiling. Actually,
lock_profiling has a subtle race which makes results caming from shared
paths not completely trustable. A macro stub (LOCK_PROFILING_SHARED) can
be actually used for re-enabling this paths, but is currently intended
for developing use only.
- style(9) fixes
Approved by: jeff, kmacy, jhb[1]
Approved by: re
[1] Had initial reservations not shared by others, conceded
in the end.
1. Rewrite the backward scan. Specifically, reverse the order in which
pages are allocated so that upon failure it is never necessary to
free pages that were just allocated. Moreover, any allocated pages
can be put to use. This makes the backward scan behave just like the
forward scan.
2. Eliminate an explicit, unsynchronized check for low memory before
calling vm_page_alloc(). It serves no useful purpose. It is, in
effect, optimizing the uncommon case at the expense of the common
case.
Approved by: re (hrs)
MFC after: 3 weeks
interrupt that is shared with other devices(e.g. USB) in system and
provide a new tunable "hw.msk.legacy_intr" to activate the legacy
interrupt handler. Setting the tunable automatically disables MSI
for msk(4). Previously msk(4) used adoptive polling with taskqueue(9)
as all msk(4) hardwares I know supports MSI. However, there are cases
that MSI couldn't be used on some hardwares due to bugs in MSI
implementatins.
Tested by: Li-Lun Wang < llwang AT infor DOT org >
Approved by: re (kensmith)
UDPv4 features to UDPv6:
- Add MAC checks on delivery and MAC labeling on transmit.
- Check for (and reject) datagrams with destination port 0.
- For multicast delivery, check the source port only if the socket being
considered as a destination has been connected.
- Implement UDP blackholing based on net.inet.udp.blackhole.
- Add a new ICMPv6 unreachable reply rate limiting category for failed
delivery attempts and implement rate limiting for UDPv6 (submitted by
bz).
Approved by: re (kensmith)
Reviewed by: bz
machines.
- Leave the long-term load balancer running by default once per second.
- Enable stealing load from the idle thread only when the remote processor
has more than two transferable tasks. Setting this to one further
improves buildworld. Setting it higher improves mysql.
- Remove the bogus pick_zero option. I had not intended to commit this.
- Entirely disallow migration for threads with SRQ_YIELDING set. This
balances out the extra migration allowed for with the load balancers.
It also makes pick_pri perform better as I had anticipated.
Tested by: Dmitry Morozovsky <marck@rinet.ru>
Approved by: re
