Commit Graph

26 Commits

Author SHA1 Message Date
Glen Barber
3e64b4c52d Add SRC_UPDATE_SKIP, DOC_UPDATE_SKIP, and PORTS_UPDATE_SKIP
variables.  These are intended to allow bypassing the
'svn co /usr/{src,doc,ports}' step in the chroot when the
tree exists from external means.

The use case here is that /usr/src, /usr/doc, and /usr/ports
in the chroot exist as result of zfs dataset clones, so it
is possible (and happens quite often) that the included
distributions may not be consistent.  (This is not the case
for -RELEASE builds, but does happen for snapshot builds.)

Tested on:	stable/9@r264319
MFC After:	3 days
Sponsored by:	The FreeBSD Foundation
2014-04-11 13:48:45 +00:00
Glen Barber
cbc0e08a7b Add a new release build variable, WITH_COMPRESSED_IMAGES.
When set to a non-empty value, the installation medium is
compressed with gzip(1) as part of the 'install' target in
the release/ directory.

With gzip(1) compression, downloadable image are reduced in
size quite significantly.  Build test against head@263927
shows the following:

 bootonly.iso:		64% smaller
 disc1.iso:		44% smaller
 memstick.img:		47% smaller
 mini-memstick.img:	65% smaller
 dvd1.iso:		untested

This option is off by default, I would eventually like to
turn it on by default, and remove the '-k' flag to gzip(1)
so only compressed images are published on FTP.

Requested by:	wkoszek
MFC After:	1 week
Sponsored by:	The FreeBSD Foundation
2014-04-01 22:41:26 +00:00
Glen Barber
9362e2bc57 Add a hack-ish attempt to provide backwards-compatibility with
release.conf SVNROOT entries that do not have a trailing '/'.

In order to provide a mechanism to use !svn, the trailing '/'
was added to SVNROOT so there were no assumptions being made
about '/' being in the URL between SVNROOT and SRCBRANCH.

Sponsored by:	The FreeBSD Foundation
2014-03-06 18:48:02 +00:00
Glen Barber
e0436612a9 Merge ^/projects/release-embedded into ^/head.
After several months of testing and fixing (and breaking)
various parts of release/release.sh changes, it is now
possible to build FreeBSD/arm images as part of the release
process.

When EMBEDDEDBUILD is set in the release.conf file, release.sh
will create the build environment, then run a separate script
in release/${XDEV}/release.sh [1].  Currently, only arm is
supported.

The release/${XDEV}/release.sh configures the build environment
specific for the target image, such as installing gcc(1),
installing additional third-party software from the ports tree,
and fetching external sources.

Once the build environment is set up, release/${XDEV}/release.sh
runs Crochet, written by Tim Kientzle, which builds the userland
and kernel, and creates an image that can be written to an SD
card with dd(1).  Many thanks to Tim for his work on Crochet.

Sample configurations for FreeBSD/arm boards are in the
release/arm/ directory, and Crochet configuration files for each
board are located in release/tools/arm/.  Supported boards at this
time are: BEAGLEBONE, PANDABOARD, RPI-B, and WANDBOARD-QUAD.

Adding support for additional boards will continue in the
projects/release-embedded/ branch, and incrementally merged back
to head/.

Many thanks to the FreeBSD Foundation for the support and
sponsorship of this project.

[1] XDEV is used in order to keep the various configurations
    organized by architecture, but since TARGET and TARGET_ARCH
    are used to build the chroot, the values of those variables
    cannot be used.

MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
2014-03-05 23:17:53 +00:00
Glen Barber
2e314957a9 Rework how WORLD_FLAGS and KERNEL_FLAGS are set, to remove an
unnecessary expr(1) call.

Inspired by:	hrs (a few months ago)
MFC after:	1 week
X-MFC-With:	r262499, r262505
Sponsored by:	The FreeBSD Foundation
2014-02-26 01:06:41 +00:00
Glen Barber
9bb84a63b7 release.sh:
- Add a VCSCMD variable that defaults to 'svn checkout',
  and update places 'svn co' is used directly.
- After sourcing a configuration file, prefix SRCBRANCH,
  PORTBRANCH, and DOCBRANCH with the SVNROOT.
- Properly capitalize 'FreeBSD.org' in the default SVNROOT.
- Update Copyright.

release.conf.sample:
- Add an example to use git instead of svn, by nullifying
  SVNROOT, and setting SRCBRANCH, DOCBRANCH, and PORTBRANCH
  to the URL fo a git repository.

release.7:
- Document VCSCMD.

Submitted by:	Rick Miller (based on)
Sponsored by:	The FreeBSD Foundation
2014-02-25 22:13:48 +00:00
Glen Barber
3da8636145 Remove EMBEDDED_WORLD_FLAGS from release.sh, and move the gcc(1)
build to arm/release.sh.

This prevents needing to build a separate chroot environment for
the arm/armv6 builds when it is not absolutely necessary.  This
is useful for situations where a single userland build is used
to populate more than one chroot.

Sponsored by:	The FreeBSD Foundation
2014-01-26 01:27:53 +00:00
Glen Barber
b479fd538c When bootstrapping the build chroot, the default environment is
set up for the amd64/amd64 TARGET/TARGET_ARCH combination.

Some of the build tools used here (u-boot in particular) require
use of gcc(1).  The lang/gcc* from ports/ will install as 'gccNN'
instead of 'gcc', so they cannot be used without extra hacks.

Add an EMBEDDED_WORLD_FLAGS variable to be used to properly set
up the build chroot.  For the RPI-B case, EMBEDDED_WORLD_FLAGS
is set to 'WITH_GCC=1', which is used to set up the build chroot.

While here, in followup to r260895, do not rely on the necessary
configuration files and/or scripts to exist in the build target
src/ tree.

To work around cases where files do not exist, copy (from the
local release/ checkout) the tools/${XDEV}/crochet-${KERNEL}.conf
to ${CHROOTDIR}/tmp/external/crochet-${KERNEL}.conf to make them
accessible to the external utilities that need them (i.e., crochet).

Sponsored by:	The FreeBSD Foundation
2014-01-19 22:25:57 +00:00
Glen Barber
34d63eb560 Implement cross build support for embedded devices into
release.sh:

 - Modify release/release.sh to recognize an 'EMBEDDEDBUILD'
   variable.  When set, release/release.sh will build the chroot
   userland as is done for big-iron builds.

 - Instead of running the 'buildworld', 'buildkernel', and
   'release' targets in the chroot, a separate script is run.
   The script tools/release/${XDEV}/release.sh sets up the rest
   of the chroot workspace, such as installing ports that will
   be needed, and building the 'xdev' target.

 - crochet (by kientzle@) is checked out from the upstream
   repository (and if needed, u-boot, in the case of Raspberry
   Pi).

 - tools/release/${XDEV}/release.sh then runs crochet with
   a configuration file specific to the ${KERNCONF} being built.

Note that this is effectively a first-pass attempt to integrate
this into the release process.

Tested against:	head@r259961
Sponsored by:	The FreeBSD Foundation
2013-12-28 02:27:06 +00:00
Glen Barber
4eb970a44f Move build_doc_ports() to the if...fi block from which it is called.
Sponsored by:	The FreeBSD Foundation
2013-12-27 17:36:43 +00:00
Julio Merino
6a1456ccc2 Put the release objdir inside the chroot.
When building the system from outside the chroot as part of the release
process, ensure the objdir is within the chroot so that the whole output
of the release.sh script is self-contained in a single directory.

Use CHROOTDIR/tmp/obj instead of CHROOTDIR/usr/obj to minimize possible
interferences with the output of the build itself.

Reviewed by:	gjb
Approved by:	rpaulo (mentor)
2013-12-25 18:25:58 +00:00
Julio Merino
87ed802785 Delay copying of resolv.conf into the chroot until /etc exists.
With an unpopulated chroot dir, release building was failing because
the script was attempting to copy resolv.conf into a non-existent /etc
directory of the chroot.  Fix this by copying the file only after the
installworld has happened, which will create this directory.

Reviewed by:	gjb
Approved by:	rpaulo (mentor)
2013-12-25 13:57:23 +00:00
Glen Barber
1d75f17448 Add WITH_DVD to RELEASE_RMAKEFLAGS, otherwise it is not actually
passed to 'make release'.

MFC after:	3 days
X-Before-RC2:	yes
Sponsored by:	The FreeBSD Foundation
2013-12-07 19:39:38 +00:00
Glen Barber
8bf3303aa0 Move OPTIONS_UNSET outside of the PBUILD_FLAGS variable, otherwise the
textproc/docproj port build fails.

Pointyhat:	gjb
MFC after:	3 days
X-Before-RC1:	yes
Sponsored by:	The FreeBSD Foundation
2013-11-30 23:56:26 +00:00
Glen Barber
98e83c53af Unconditionally copy the build host /etc/resolv.conf into
the chroot directory, since hostname resolution may be
needed in the case of building a dvd image (with packages)
and also setting 'NOPORTS=1'.

MFC after:	3 days
X-MFC-With:	r258305, r258307
Sponsored by:	The FreeBSD Foundation
2013-11-18 16:04:04 +00:00
Glen Barber
20dc9c67c4 Since the doc/ toolchain conversion to docbook 5.0, JADETEX
is no longer a valid option, so remove 'WITHOUT_JADETEX=yes'
from PBUILD_FLAGS.

While here, also remove 'WITHOUT_X11=yes', since it will
cause a dependency conflict by requiring both print/ghostscript9
and print/ghostscript9-nox11.

Switch to OPTIONSNG format (WITHOUT_* -> OPTIONS_UNSET='FOO'),
and unset the FOP option, which requires Java (although it is
disabled by default).  Also unset the 'IGOR' option, since
textproc/igor is a validation tool, not necessarily a dependency
of the doc/ build itself.

While here, reduce the line length of PBUILD_FLAGS.

MFC after:	3 days
Sponsored by:	The FreeBSD Foundation
2013-11-13 17:49:07 +00:00
Glen Barber
456685fbfb Fix a few style nits.
MFC after:	3 days
X-MFC-After:	10.0-RELEASE
Sponsored by:	The FreeBSD Foundation
2013-11-11 03:30:14 +00:00
Glen Barber
1997c2ef26 When building the textproc/docproj port, the ports-mgmt/pkg port
needs /var/run/ld-elf*.so.hints, which is not automatically created.

Fix reldoc build by running the ldconfig(8) startup script in the
chroot directory before starting the port build phase.

MFC after:	3 days
Sponsored by:	The FreeBSD Foundation
2013-11-04 16:28:29 +00:00
Glen Barber
8fdf27c6d7 Remove hash generation from release.sh, as it is run as part of
the 'install' target in the release/Makefile.

MFC after:	3 days
Submitted by:	jhb
Approved by:	re (hrs)
Sponsored by:	The FreeBSD Foundation
2013-10-09 22:00:03 +00:00
Glen Barber
8a9c704b40 Remove extra 'MAKE_FLAGS' line.
Submitted by:	jhb
Approved by:	re (marius)
Sponsored by:	The FreeBSD Foundation
2013-09-19 19:49:31 +00:00
Glen Barber
4756295ebb Remove get_rev_branch(), functionality exists in the release/Makefile.
Submitted by:	hrs
2013-08-13 21:01:23 +00:00
Glen Barber
a1020436ea - Only set ARCH_FLAGS (TARGET/TARGET_ARCH) if specified, otherwise
allow the toolchain to detect the correct values.

- Remove {SRC,DOC,PORT}REVISION variables, and use 'branch@rNNNNNN'
  as the {SRC,DOC,PORT}BRANCH variables.

- Only set default KERNEL_FLAGS and WORLD_FLAGS make(1) jobs if the
  number of CPUs is greater than 1.

Submitted by:	hrs
2013-08-13 20:16:14 +00:00
Glen Barber
74e0b3f151 - Add SRC_FORCE_CHECKOUT configuration option to force svn to checkout
the src/ tree into a directory that contains files/directories, such
  as a case where a custom kernel configuration file is specified.

- Allow specification of multiple KERNCONFs to pass to 'make release'.

- Move evaluation of NODOCS/NOPORTS earlier, and set based on how the
  release process expects these options to be evaluated.

- Wrap KERNCONF specification in double quotes, and use 'eval' so multiple
  kernel configurations do not cause the build to fail in strange ways.

- Set WITHOUT_X11 for the port build flags for the documentation toolchain
  build.  Also run 'clean distclean' targets during port build.

PR:		180192
Submitted by:	Anes Mukhametov
MFC after:	3 days
Approved by:	kib (mentor, implicit)
2013-07-05 22:04:49 +00:00
Glen Barber
13f8962353 If MAKE_CONF and/or SRC_CONF are set and not character devices,
copy to chroot to use with release build.

Submitted by:	Garrett Cooper (original version)
Approved by:	kib (mentor)
MFC after:	1 week
2013-06-22 22:12:24 +00:00
Glen Barber
00af300751 Fix OSVERSION variable within PBUILD_FLAGS.
Submitted by:	Garrett Cooper (in part)
Approved by:	kib (mentor)
MFC After:	1 week
X-MFC-With:	r251652
X-MFC-To:	stable/9 only
2013-06-16 17:54:56 +00:00
Glen Barber
62fed16cb9 Add new script to run release builds. The script is heavily based upon
the release/generate-release.sh script by nwhitehorn.

This script can use optional configuration file to override defaults,
making running multiple serialzied builds with different specific
configurations or architecture-specific tunings quite easy.

Sample overrideable options are included in the release.conf.sample
file.

Approved by:	kib (mentor)
MFC After:	2 weeks
X-MFC-To:	stable/9 only
2013-06-12 13:15:28 +00:00