Some watchdog drivers (like ipmi) need to sleep while patting the watchdog.
See sys/dev/ipmi/ipmi.c:ipmi_wd_event(), which calls malloc(M_WAITOK).
Submitted by: asomers
MFC after: 1 month
Sponsored by: Spectra Logic
MFSpectraBSD: 637548 on 2012/10/04
While strictly speaking this is not correct since some fields are pointers,
it makes no difference on all supported archs and we already rely on it doing
the right thing in other places.
No functional changes.
that the tty is dequeued from 'tty_list' only the first time.
The panic below was seen when a revoke(2) was issued on an nmdm device.
In this case there was also a thread that was blocked on a read(2) on the
device. The revoke(2) woke up the blocked thread which would typically
return an error to userspace. In this case the reader also held the last
reference on the file descriptor so fdrop() ended up calling tty_rel_free()
via ttydev_close().
tty_rel_free() then tried to dequeue 'tp' again which led to the panic.
panic: Bad link elm 0xfffff80042602400 prev->next != elm
cpuid = 1
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00f9c90460
kdb_backtrace() at kdb_backtrace+0x39/frame 0xfffffe00f9c90510
vpanic() at vpanic+0x189/frame 0xfffffe00f9c90590
panic() at panic+0x43/frame 0xfffffe00f9c905f0
tty_rel_free() at tty_rel_free+0x29b/frame 0xfffffe00f9c90640
ttydev_close() at ttydev_close+0x1f9/frame 0xfffffe00f9c90690
devfs_close() at devfs_close+0x298/frame 0xfffffe00f9c90720
VOP_CLOSE_APV() at VOP_CLOSE_APV+0x13c/frame 0xfffffe00f9c90770
vn_close() at vn_close+0x194/frame 0xfffffe00f9c90810
vn_closefile() at vn_closefile+0x48/frame 0xfffffe00f9c90890
devfs_close_f() at devfs_close_f+0x2c/frame 0xfffffe00f9c908c0
_fdrop() at _fdrop+0x29/frame 0xfffffe00f9c908e0
sys_read() at sys_read+0x63/frame 0xfffffe00f9c90980
amd64_syscall() at amd64_syscall+0x2b3/frame 0xfffffe00f9c90ab0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe00f9c90ab0
--- syscall (3, FreeBSD ELF64, sys_read), rip = 0x800b78d8a, rsp = 0x7fffffbfdaf8, rbp = 0x7fffffbfdb30 ---
CR: https://reviews.freebsd.org/D851
Reviewed by: glebius, ed
Reported by: Leon Dang
Sponsored by: Nahanni Systems
MFC after: 1 week
fail the allocation request. Allocations of "reserved" resources such as
PCI BARs already fail the request instead of panic'ing in this case.
MFC after: 1 week
struct flock are done in the sys_fcntl(), which mean that compat32 used
direct access to userland pointers.
Move code from sys_fcntl() to new wrapper, kern_fcntl_freebsd(), which
performs neccessary userland memory accesses, and use it from both
native and compat32 fcntl syscalls.
Reported by: jhibbits
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
holding a write reference on the filesystem. Try to get write
reference in unblocked way after all vnodes are resolved; if failed,
drop all locks and retry after waiting for suspension end.
The VFS_UNMOUNT() methods for UFS and tmpfs try to establish
suspension on unmount, while covered vnode is locked by VFS, which
prevents namei() from stepping over the mount point. The thread doing
namei() sleeps on the covered vnode lock, owning the write ref.
Reported by: bdrewery
Tested by: bdrewery (previous version), pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Summary:
Add the beginnings of multipass suspend/resume, by introducing
BUS_SUSPEND_CHILD/BUS_RESUME_CHILD, and move the PCI driver to this.
Reviewers: jhb
Reviewed By: jhb
Differential Revision: https://reviews.freebsd.org/D590
struct kinfo_file.
- Move the various fill_*_info() methods out of kern_descrip.c and into the
various file type implementations.
- Rework the support for kinfo_ofile to generate a suitable kinfo_file object
for each file and then convert that to a kinfo_ofile structure rather than
keeping a second, different set of code that directly manipulates
type-specific file information.
- Remove the shm_path() and ksem_info() layering violations.
Differential Revision: https://reviews.freebsd.org/D775
Reviewed by: kib, glebius (earlier version)
The current TSO limitation feature only takes the total number of
bytes in an mbuf chain into account and does not limit by the number
of mbufs in a chain. Some kinds of hardware is limited by two
factors. One is the fragment length and the second is the fragment
count. Both of these limits need to be taken into account when doing
TSO. Else some kinds of hardware might have to drop completely valid
mbuf chains because they cannot loaded into the given hardware's DMA
engine. The new way of doing TSO limitation has been made backwards
compatible as input from other FreeBSD developers and will use
defaults for values not set.
Reviewed by: adrian, rmacklem
Sponsored by: Mellanox Technologies
MFC after: 1 week
footprint systems(32M/64M) and didn't leave enough free memory to load modules
when it was setting up page tables that for sizes that are never used on
these smallish boards.
Set kmem_zmax to PAGE_SIZE on these smaller systems (< 128M) to keep this
from happening. Verified on mips32 h/w.
PR: 193465
Submitted by: delphij
Reviewed by: adrian
than u_char.
Migrate post_filter to use an int for a CPU rather than u_char.
Change intr_event_bind() to use an int for CPU rather than u_char.
It touches the ppc, sparc64, arm and mips machdep code but it should
(hah!) be a no-op.
Tested:
* i386, AMD64 laptops
Reviewed by: jhb
POSIX compliance and to improve compatibility with Linux and NetBSD
The issue was identified with lib/libc/sys/t_access:access_inval from
NetBSD
Update the manpage accordingly
PR: 181155
Reviewed by: jilles (code), jmmv (code), wblock (manpage), wollman (code)
MFC after: 4 weeks
Phabric: D678 (code), D786 (manpage)
Sponsored by: EMC / Isilon Storage Division
This change fixes transient performance drops in some of my benchmarks,
vanishing as soon as I am trying to collect any stats from the scheduler.
It looks like reordered access to those variables sometimes caused loss of
IPI_PREEMPT, that delayed thread execution until some later interrupt.
MFC after: 3 days
- Add invfo_rdwr() (for read and write), invfo_ioctl(), invfo_poll(),
and invfo_kqfilter() for use by file types that do not support the
respective operations. Home-grown versions of invfo_poll() were
universally broken (they returned an errno value, invfo_poll()
uses poll_no_poll() to return an appropriate event mask). Home-grown
ioctl routines also tended to return an incorrect errno (invfo_ioctl
returns ENOTTY).
- Use the invfo_*() functions instead of local versions for
unsupported file operations.
- Reorder fileops members to match the order in the structure definition
to make it easier to spot missing members.
- Add several missing methods to linuxfileops used by the OFED shim
layer: fo_write(), fo_truncate(), fo_kqfilter(), and fo_stat(). Most
of these used invfo_*(), but a dummy fo_stat() implementation was
added.
instead of breaking out of the loop and then immediately checking the loop
index so that if it was broken out of the proper value can be returned.
While here, use nitems().
This fixes a panic in the i915 driver when one uses debug.kdb.enter=1
under vt(4).
PR: 193269
Reported by: emaste@
Submitted by: avg@
MFC after: 3 days
imgp->interpreted to a bitmask instead of, functionally, a bool. Each
imgactivator now requires its own flag in interpreted to indicate whether
or not it has already examined argv[0].
Change imgp->interpreted to an unsigned char to add one extra bit for
future use.
With this change, one can execute a shell script from a 64bit host native
make and still get the binmisc image activator to fire for the script
interpreter. Prior to this, execution would fail.
Phabric: https://reviews.freebsd.org/D696
Reviewed by: jhb@
MFC after: 4 weeks
set bo_bsize on a bufobj.
This is a slight modification of the patch provided.
PR: 193146
Submitted by: Conrad Meyer <conrad.meyer@isilon.com>
Sponsored by: EMC Isilon Storage Division
reaches 1. The p_numthreads counter is decremented in thread_exit() by
a call to thread_unlink(). This means that the exiting threads may
still execute on other CPUs when thread_single(SINGLE_EXIT) returns.
As result, vmspace could be destroyed while paging structures are
still used on other CPUs by exiting threads.
Delay the return from thread_single(SINGLE_EXIT) until all threads are
really destroyed by thread_stash() after the last switch out. The
p_exitthreads counter already provides the required mechanism, move
the wait from the thread_wait() (which is called from wait(2) code)
into thread_single().
Reported by: many (as "panic: pmap active <addr>")
Reviewed by: alc, jhb
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Prior to the change it would always return initproc for non-traced processes.
This fixes ps apparently always returning 1 as ppid.
Pointy hat: mjg
Reported by: many
MFC after: 1 week
Add a separate field which exports tracer pid and add a new keyword
("tracer") for ps to display it.
This is a follow up to r270444.
Reviewed by: kib
MFC after: 1 week
Relnotes: yes
They are used when a panic occurs or when entering a DDB session for
instance.
cngrab() forces a vt-switch to the console window, no matter if the
original window is another terminal or an X session. However, cnungrab()
doesn't vt-switch back to the original window currently.
MFC after: 1 week
