Commit Graph

128 Commits

Author SHA1 Message Date
Andrey A. Chernov
b27a526947 Revision 1.6 fix was lost: don't write 0 to RTC_DIAG 1994-11-12 16:24:54 +00:00
Andrey A. Chernov
3b8f1cfc05 Use adjkerntz into inittodr too (for APM stuff) 1994-11-10 12:53:13 +00:00
Bruce Evans
a3b33372b9 Maintain a new variable `timer0_overflow_threshold' so that microtime()
doesn't have to calculate it every call.

Rename `timer0_prescale' to `timer0_prescaler_count' and maintain it
correctly.  Previously we lost a few 8253 cycles for every "prescaled"
clock interrupt, and the lossage grows rapidly at 16 KHz.  Now we
only lose a few cycles for every standard clock interrupt.

Rename `*_divisor' to `*_max_count'.

Do the calculation of TIMER_DIV(rate) only once instead of 3 times each
time the rate is changed.

Don't allow preposterously large interrupt rates.  Bug fixes elsewhere
should allow the system to survive rates that saturate the system, however.

Clean up declarations.

Include <machine/clock.h> to check our own declarations.
1994-11-05 23:55:07 +00:00
Stefan Eßer
8627141c50 BEWARE: Interface change of register_intr() !
Changed the fifth parameter to register_intr() from u_int mask into
u_int *maskptr in preparation for new features (shared interrupts and
removable devices, eg. for PCMCIA).
1994-10-25 22:35:12 +00:00
Andrey A. Chernov
fd34b8e78c Add disable_rtc_set variable to block resettodr() call, needed for
adjkerntz -i, per Bruce suggestion
1994-10-04 18:39:10 +00:00
Andrey A. Chernov
3bbe7b72df RTC_CENTURY usage ifdefed out by USE_RTC_CENTURY compile option,
pointed by Bruce
1994-10-04 13:59:44 +00:00
Søren Schmidt
336abda6cd Updated pcaudio.c to latest from 1.1.5.1
Enabled timer reprogramming in clock.c (this could use more work).

Obtained from: FreeBSD-1.1.5.1
1994-09-29 08:24:45 +00:00
Bruce Evans
7fecb8e845 Don't lose the RTC interrupt in resettodr(). 1994-09-20 21:20:46 +00:00
Andrey A. Chernov
7b915aa631 resettodr() implemented, inittodr() fixed
Submitted by: me & chris@gnome.co.uk
1994-09-20 00:31:07 +00:00
Bruce Evans
eb51e37703 Remove some unnecessary #includes.
Restore the simple leap year calculation as a macro and document it so
that it doesn't become complicated again.  The simple version works
for all leap years covered by 32-bit time_t's.  The complicated version
doesn't work for all leap years covered by 64-bit time_t's since among
other reasons, the solar system is not stable for long enough.

Fix declarations.

Nuke spinwait().
1994-09-18 23:08:56 +00:00
Garrett Wollman
3f31c649d1 Redo Kernel NTP PLL support, kernel side.
This code is mostly taken from the 1.1 port (which was in turn taken from
Dave Mills's kern.tar.Z example).  A few significant differences:

1) ntp_gettime() is now a MIB variable rather than a system call.  A few
fiddles are done in libc to make it behave the same.

2) mono_time does not participate in the PLL adjustments.

3) A new interface has been defined (in <machine/clock.h>) for doing
possibly machine-dependent things around the time of the clock update.
This is used in Pentium kernels to disable interrupts, set `time', and
reset the CPU cycle counter as quickly as possible to avoid jitter in
microtime().  Measurements show an apparent resolution of a bit more than
8.14usec, which is reasonable given system-call overhead.
1994-09-18 20:40:01 +00:00
Andrey A. Chernov
82a4cf2359 1. adjkerntz variable added for preparation to resettodr() implementation
2. Leap year calculations fixed
1994-09-14 23:09:06 +00:00
Garrett Wollman
f23b4c91c4 Fix up some sloppy coding practices:
- Delete redundant declarations.
- Add -Wredundant-declarations to Makefile.i386 so they don't come back.
- Delete sloppy COMMON-style declarations of uninitialized data in
  header files.
- Add a few prototypes.
- Clean up warnings resulting from the above.

NB: ioconf.c will still generate a redundant-declaration warning, which
is unavoidable unless somebody volunteers to make `config' smarter.
1994-08-18 22:36:09 +00:00
David Greenman
8912c0ed61 Bruce Evans' dynamic interrupt support.
/usr/src/sys/i386/isa/clock.c:
	o Garrett's statclock changes.
	o Wire xxxintr, not Vclk.
	o Wire using register_intr(), not setidt().

/usr/src/sys/i386/isa/icu.s:
	o Garrett's statclock changes.
	o Removed unused variable high_imask.
	o Fake int 8 for rtc as well as int 0 for clk.  Required for kernel
	  profiling with statclock, harmless otherwise.

/usr/src/sys/i386/isa/isa.c:
	o Allow isdp->id_irq and other things in *isdp to be changed by
	  probes.  Changing interrupts later requires direct calls to
	  register_intr() and unregister_intr() and more care.
	  ALLOW_CONFLICT_* is brought over from 1.1.5, except
	  ALLOW_CONFLICT_IRQ is not supported.  IRQ conflict checking is
	  delayed until after probing so that drivers can change the IRQ
	  to a free one; real conflicts require more cooperation between
	  drivers to handle.
	o Too many details to list.
	o This file requires splitting and a lot more work.

/usr/src/sys/i386/isa/isa_device.h:
	o Declare more things more completely.

/usr/src/sys/i386/isa/sio.c:
	o Prepare to register interrupt handlers as fast.

/usr/src/sys/i386/isa/vector.s:
	o Generate entry code for 16 fast interrupt handlers and 16 normal
	  interrupt handlers.  Changed some constants to variables:
	  # $unit is now intr_unit[intr].  Type is int.  Someday it should
	    be a cookie suitable for the handler (e.g., a struct com_s for
	    sio).
	  # $handler is now intr_handler[intr].
	  # intrcnt_actv[id_num] is now *intr_countp[intr].  The indirection
	    is required to get a contiguous range of counters for vmstat
	    and so that the drivers depend more in the driver than on the
	    interrupt number (drivers could take turns using an interrupt
	    and the counts would remain correct).  There is a separate
	    counter for each device and for each stray interrupt.  In
	    1.1.5, stray interrupt 7 clobbers the count for device 7 or
	    something worse if there is no device 7 :-(.
	  # mask is now intr_mask[intr] (was already indirect).
	 o Entry points are now _XintrI and _XfastintrI (I = intr = 0-15),
	   not _VdevU (U = unit).
	 o Removed BUILD_VECTORS stuff.  There's a trace of it left for
	   the string table for vmstat but config now generates the
	   string in one piece because nothing more is required.
	 o Removed old handling of stray interrupts and older comments
	   about it.

Submitted by:	 Bruce Evans
1994-08-18 05:09:36 +00:00
Garrett Wollman
8ea838500f Enable use of the RTC chip for the statistical clock. While this does
not provide the full accuracy of a randomized statistical clock, it does
provide greater accuracy than the previous method, while not significantly
increasing overhead.  It also provides profiling support at 1024 Hz.

You must re-compile config before making a new kernel, or you will end
up with unresolved symbols.

Reviewed uy:	Bruce evans said it worked for him.
1994-08-15 03:15:20 +00:00
Garrett Wollman
f540b1065a Change all #includes to follow the current Berkeley style. Some of these
``changes'' are actually not changes at all, but CVS sometimes has trouble
telling the difference.

This also includes support for second-directory compiles.  This is not
quite complete yet, as `config' doesn't yet do the right thing.  You can
still make it work trivially, however, by doing the following:

rm /sys/compile
mkdir /usr/obj/sys/compile
ln -s M-. /sys/compile
cd /sys/i386/conf
config MYKERNEL
cd ../../compile/MYKERNEL
ln -s /sys @
rm machine
ln -s @/i386/include machine
make depend
make
1994-08-13 03:50:34 +00:00
Garrett Wollman
fba73571bd For Pentium machines, use a faster version of microtime with 8 usec
resolution (can probably be improved somewhat).  Other machines take
a three-instruction hit if I586_CPU is defined, none otherwise.
1994-08-11 00:28:24 +00:00
Garrett Wollman
a4f90f4d45 Tell Pentium users their CPU speed. (More changes to make use of this
to come later.)
1994-08-10 23:28:33 +00:00
Rodney W. Grimes
26f9a76710 The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch.
Reviewed by:	Rodney W. Grimes
Submitted by:	John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
Søren Schmidt
bc36c8064b Update the reprogram timer stuff, now the frequency of timer 0
can only be changed at the "right" times. Accuracy should be
assured.
1994-05-02 09:41:24 +00:00
Garrett Wollman
9ad380ab4c Define new option, INACCURATE_MICROTIME_IS_OK. When this is defined,
the NTP kernel PLL is disabled, and acquire_timer0() is enabled, thus
opening the door for microtime() (and hence gettimeofday()) to return
bogus timestamps.  This option is necessary for the `pca' driver to
work, but is implemented to underscore the fact that accurate timekeeping
and the `pca' driver are incompatible at present.  If someone writes a version
of microtime() that works when the `pca' driver is being used, this can get
junked.
1994-04-23 21:39:18 +00:00
Søren Schmidt
5194771d25 New support for sharing the timers
acquire_timer / release_timer

Pulled in timer related functions from isa.c
1994-04-21 14:19:16 +00:00
David Greenman
102cfb5c3e At the suggestion of Bruce Evans, don't zero RTC diag register. Doing so
was causing problems for some machines.
1994-02-06 22:48:13 +00:00
Garrett Wollman
aaf08d94ca Make everything compile with -Wtraditional. Make it easier to distribute
a binary link-kit.  Make all non-optional options (pagers, procfs) standard,
and update LINT to reflect new symtab requirements.

NB: -Wtraditional will henceforth be forgotten.  This editing pass was
primarily intended to detect any constructions where the old code might
have been relying on traditional C semantics or syntax.  These were all
fixed, and the result of fixing some of them means that -Wall is now a
realistic possibility within a few weeks.
1993-12-19 00:55:01 +00:00
Garrett Wollman
381fe1aaf4 Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and
add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
Andrey A. Chernov
03d24cbca4 DST offset calculation removed, it is wrong in any case. 1993-11-04 01:56:31 +00:00
Rodney W. Grimes
6f78ca6026 Removed all patch kit headers, sccsid and rcsid strings, put $Id$ in, some
minor cleanup.  Added $Id$ to files that did not have any version info, etc
1993-10-16 13:48:52 +00:00
Rodney W. Grimes
5b81b6b301 Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00