Commit Graph

607 Commits

Author SHA1 Message Date
Philip Paeps
0754972c5c Optimize set_origin() use in some screensavers to stop them eating
cpu power when the origin hasn't changed.

PR:		kern/100683
Submitted by:	Gareth McCaughan <gareth -dot- mccaughan -at- pobox.com>
MFC after:	3 days
2007-02-21 12:27:12 +00:00
Marius Strobl
2e297271ca Correct the VGA_NO_MODE_CHANGE end marker comment. 2007-01-10 19:04:00 +00:00
Ruslan Ermilov
5a66b66324 Replace magic numbers for console bell types with defines. 2006-11-16 12:27:51 +00:00
Ruslan Ermilov
4f32adad48 Sometimes the vty switching has to be delayed; the vty
to be switched to is saved in sc->delayed_next_scr and
the actual switch is performed later.  It was possible
to get into the endless loop when attempting to switch
to a closed vty (which is not allowed and beep-alerted
when attempted) and when the visual beep was in effect.
This caused sc->delayed_next_scr to never be reset and
endless attempts to switch to a closed vty and endless
visual beeping.  How to repeat:

- boot into single-user
- run "kbdcontrol -b visual"
- quickly press Alt+F2 two times

PR:		kern/68016
X-MFC after:	6.2-RELEASE
2006-11-06 19:06:07 +00:00
Robert Watson
acd3428b7d Sweep kernel replacing suser(9) calls with priv(9) calls, assigning
specific privilege names to a broad range of privileges.  These may
require some future tweaking.

Sponsored by:           nCircle Network Security, Inc.
Obtained from:          TrustedBSD Project
Discussed on:           arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
                        Alex Lyashkov <umka at sevcity dot net>,
                        Skip Ford <skip dot ford at verizon dot net>,
                        Antoine Brodin <antoine dot brodin at laposte dot net>
2006-11-06 13:42:10 +00:00
Ruslan Ermilov
9fddcc6661 Fix our ioctl(2) implementation when the argument is "int". New
ioctls passing integer arguments should use the _IOWINT() macro.
This fixes a lot of ioctl's not working on sparc64, most notable
being keyboard/syscons ioctls.

Full ABI compatibility is provided, with the bonus of fixing the
handling of old ioctls on sparc64.

Reviewed by:	bde (with contributions)
Tested by:	emax, marius
MFC after:	1 week
2006-09-27 19:57:02 +00:00
Scott Long
988129b824 Introduce a spinlock for synchronizing access to the video output hardware
in syscons.  This replaces a simple access semaphore that was assumed to be
protected by Giant but often was not.  If two threads that were otherwise
SMP-safe called printf at the same time, there was a high likelyhood that
the semaphore would get corrupted and result in a permanently frozen video
console.  This is similar to what is already done in the serial console
drivers.
2006-09-13 15:48:15 +00:00
Poul-Henning Kamp
7672c95932 Convert to new console api 2006-05-26 13:54:27 +00:00
Poul-Henning Kamp
16b1613a31 GC the cn_dbctl_t hook for consoles, it is unused.
This used to make syscons switch to vty0 when we entered DDB but this
was lost in the KDB shuffle.  We may want to bring it back down the road
but it should be done by calling cn_init_t/cn_term_t instead, possibly
with a flag argument saying "Debugger!"
2006-05-26 10:24:00 +00:00
Warner Losh
d708737568 APM was calling the suspend process from a timeout. This meant that
other timeouts could not happen while suspending, including timeouts
for things like msleep.  This caused the system to hang on suspend
when the cbb was enabled, since its suspend path powered down the
socket which used a timeout to wait for it to be done.

APM now creates a thread when it is enabled, and deletes the thread
when it is disabled.  This thread takes the place of the timeout by
doing its polling every ~.9s.  When the thread is disabled, it will
wakeup early, otherwise it times out and polls the varius things the
old timeout polled (APM events, suspend delays, etc).

This makes my Sony VAIO 505TS suspend/resume correctly when APM is
enabled (ACPI is black listed on my 505TS).

This will likely fix other problems with the suspend path where
drivers would sleep with msleep and/or do other timeouts.  Maybe
there's some special case code that would use DELAY while suspending
and msleep otherwise that can be revisited and removed.

This was also tested by glebius@, who pointed out that in the patch I
sent him, I'd forgotten apm_saver.c

MFC After: 3 weeks
2006-05-25 23:06:38 +00:00
Poul-Henning Kamp
f6ce2a64f7 Send the pcvt(4) driver off to retirement. 2006-05-17 09:33:15 +00:00
Giorgos Keramidas
cb9dec9ec1 Check the return code of sc_clean_up() in the only place where it
was not checked at all.  There is only one case when sc_clean_up()
can fail, because of wait_scrn_saver_stop(), but it doesn't hurt
to check anyway.

Reviewed by:	rodrigc
Found by:	Coverity Prevent
2006-05-12 22:43:07 +00:00
John Baldwin
73dbd3da73 Remove various bits of conditional Alpha code and fixup a few comments. 2006-05-12 05:04:46 +00:00
Maksim Yevmenkin
d168d95487 Integrate kbdmux(4) into syscons(4) and kbd code.
By default syscons(4) will look for the kbdmux(4) keyboard first, and then,
if not found, look for any keyboard.

Current kbd code is modified so if kbdmux(4) is the current keyboard, all
new keyboards are automatically added to the kbdmux(4).

Switch to kbdmux(4) can be done at boot time, by loading kbdmux module at
the loader prompt, or at runtime, by kldload'ing the kbdmux module and
releasing current active keyboard.

If, for whatever reason, kbdmux(4) is not required/desired then just do
not load it and everything should work as before. It is also possible to
kldunload kbdmux at runtime and syscons(4) will automatically switch to
the first available keyboard.

No response from:	freebsd-current@
MFC after:		1 day
2006-02-28 23:46:23 +00:00
Brooks Davis
30e3426947 When SC_DISABLE_KDBKEY or SC_DISABLE_REBOOT are not defined allow the
same behavior to be controlled by the sysctls, hw.syscons.kbd_kbdkey
and hw.syscons.kbd_reboot respectively.

Apologies to the submitter for taking so long to commit this simple
change.

PR:		kern/72728
Submitted by:	Luca Morettoni <morettoni at libero dot it>
MFC After:	3 days
2006-01-14 17:57:17 +00:00
Ruslan Ermilov
f4e9888107 Fix -Wundef. 2005-12-04 02:12:43 +00:00
Marius Strobl
b7c96c0d0b Add a font width argument to vi_load_font_t, vi_save_font_t and vi_putm_t
and do some preparations for handling 12x22 fonts (currently lots of code
implies and/or hardcodes a font width of 8 pixels). This will be required
on sparc64 which uses a default font size of 12x22 in order to add font
loading and saving support as well as to use a syscons(4)-supplied mouse
pointer image.
This API breakage is committed now so it can be MFC'ed in time for 6.0
and later on upcoming framebuffer drivers destined for use on sparc64
and which are expected to rely on using font loading internally and on
a syscons(4)-supplied mouse pointer image can be easily MFC'ed to
RELENG_6 rather than requiring a backport.

Tested on:	i386, sparc64, make universe
MFC after:	1 week
2005-09-28 14:54:07 +00:00
Craig Rodrigues
3a9c56bec9 In set_mouse_pos(), try to avoid division by zero errors. 2005-09-07 15:19:03 +00:00
Craig Rodrigues
4506b763e0 In sc_set_text_mode(), reset fontwidth if it is <= 0.
Eliminates division by zero errors in syscons driver.

Reported by:	keramida, Slawa Olhovchenkov <slw at zxy dot spb dot ru>,
		Kyryll Mirnenko <mirya at matrix dot kiev dot ua>
Tested by:	keramida, rodrigc
2005-09-06 20:38:39 +00:00
Craig Rodrigues
86330afe35 Prevent division by zero errors in sc_mouse_move()
by explicitly setting sc->font_width, in the same
places where sc->font_size is set, instead of
relying on the default initialized value of 0 for sc->font_width.

PR:		kern/84836
Reported by:	Andrey V. Elsukov <bu7cher at yandex dot ru>
MFC after:	2 days
2005-08-30 18:58:17 +00:00
Maksim Yevmenkin
04551c6ce5 kbdmux(4) keyboard multiplexer integration
o Add two new ioctl's KBADDKBD and KBRELKBD. These are used to add and remove
  keyboard to (and from) kbdmux(4) keyboard multiplexer;

o Introduce new kbd_find_keyboard2() function. It does exactly the same job
  as kbd_find_keyboard() function except it allows to specify starting index.
  This function can be used to iterate over keyboards array;

o Re-implement kbd_find_keyboard() as call to kbd_find_keyboard2() with starting
  index of zero;

o Make sure syscons(4) passed KBADDKBD and KBRELKBD ioctl's onto currently
  active keyboard.

These changes should not have any visible effect.

MFC after:	1 week
2005-07-13 23:58:57 +00:00
Peter Wemm
e55b30b469 Fix syscons on amd64. The SC_PIXEL_MODE commit from May 29th added a new
function pointer to the vga render dispatch table and initialized it with
vga_nop.  The problem is that vga_nop() is a varargs function, and the
table declares a non-varargs function pointer.  On amd64 (and I think ppc),
mixing varargs and non-varargs function pointers is fatal.

Change vga_nop() and gfb_nop() from varargs to non-varargs do-nothing
functions.  This stops the stack corruption that only happened on amd64.

Approved by:  re (scottl)
2005-06-14 02:43:45 +00:00
Xin LI
4c3763445d Only set mode when the incoming ioctl is IOC_VOID, until we have better
solution against the ioctl collisions.

Submitted by:	Antoine Brodin <antoine.brodin at laposte net>
PR:		kern/81867
2005-06-10 05:20:33 +00:00
Scott Long
5a8d0950c1 Fix LINT by defining vga_pxlmouse_planar and vga_pxlmouse_direct. 2005-05-30 18:37:25 +00:00
Xin LI
b147cf1db2 Deny to switch into banked video mode when it is not available. Some
users has reported corrupted display with old video cards.

Submitted by:	Michal Mertl <mime traveller cz>
2005-05-30 06:45:40 +00:00
Marius Strobl
80afb03ba1 Add vr_init_t member to sc_rndr_sw_t instances in order to unbreak
compilation after sys/dev/syscons/syscons.h rev. 1.83.
2005-05-29 12:47:39 +00:00
Xin LI
f112120666 Add VESA mode support for syscons, which enables the support of 15, 16,
24, and 32 bit modes.  To use that, syscons(4) must be built with
the compile time option 'options SC_PIXEL_MODE', and VESA support (a.k.a.
vesa.ko) must be either loaded, or be compiled into the kernel.

Do not return EINVAL when the mouse state is changed to what it already is,
which seems to cause problems when you have two mice attached, and
applications are not likely obtain useful information through the EINVAL
caused by showing the mouse pointer twice.

Teach vidcontrol(8) about mode names like MODE_<NUMBER>, where <NUMBER> is
the video mode number from the vidcontrol -i mode output.  Also, revert the
video mode if something fails.

Obtained from:	DragonFlyBSD
Discussed at:	current@ with patch attached [1]
PR:		kern/71142 [2]
Submitted by:	Xuefeng DENG <dsnofe at msn com> [1],
		Cyrille Lefevre <cyrille dot lefevre at laposte dot net> [2]
2005-05-29 08:43:44 +00:00
Marius Strobl
c9367f6c37 - Not every architecture defaults to a black background (e.g. sparc64
uses white) so base the color of the border on SC_NORM_ATTR rather
  than hardcoding BG_BLACK.
- Use SC_DRIVER_NAME rather than hardcoding 'sc' in message strings
  (see also sys/dev/syscons/syscons.h rev. 1.82).
2005-05-21 20:32:27 +00:00
Marius Strobl
fc0e49bd50 On sparc64 use 'syscons' rather than 'sc' for SC_DRIVER_NAME so
syscons(4) and its pseudo-devices don't get confused (including by
other device drivers) with the system controller devices which are
also termed 'sc' in the OFW tree (and which we probably want to
interface with hwpmc(4) one day).
2005-05-21 20:29:58 +00:00
Marius Strobl
ae240fafb2 Remove superfluous braces and add #ifndef __sparc64__ around the
VTB_FRAMEBUFFER specific code. On sparc64 we don't use a buffer of
type VTB_FRAMEBUFFER (see syscons.c) and excluding the respective
code here allows to compile syscons(4) without isa(4).

Requested by:	joerg, marcel, yongari
2005-05-21 20:28:15 +00:00
Marius Strobl
912dd06aed For sparc64 conditionalize the compilation of the gfb_cursor() variant
which doesn't assume a hardware cursor on __sparc64__ rather than on
DEV_CREATOR. If we want to include more than one framebuffer driver in
e.g. the GENERIC kernel all drivers have to work the same way. Now that
DEV_CREATOR is no longer used remove it from options.sparc64.
2005-05-21 20:15:14 +00:00
Yoshihiro Takahashi
f4acf7e936 Remove old epson note support. 2005-05-15 09:07:42 +00:00
Yoshihiro Takahashi
6959aa373c - Add color tables for 16 colors mode and 8 colors mode, use a different
table on the pc98 console.
- Remove old epson note support.
2005-05-15 09:07:04 +00:00
Yoshihiro Takahashi
8763b97d37 - Mask an underline attribute on the pc98 console. It enables to use the same
color on the pc98 and the others.
- Remove old epson note support.
2005-05-15 08:59:00 +00:00
Yoshihiro Takahashi
b4d6f74dce Remove the ADJUST_CLOCK ioctl on pc98. It's not used at all. 2005-05-15 07:35:49 +00:00
Yoshihiro Takahashi
d1725ef7ff Change a directory layout for pc98.
- Move MD files into <arch>/<arch>.
  - Move bus dependent files into <arch>/<bus>.
Rename some files to more suitable names.

Repo-copied by:	peter
Discussed with:	imp
2005-05-10 12:02:18 +00:00
Warner Losh
9fc371f86b No need to ifdef this pc98. 2005-04-04 05:28:19 +00:00
Poul-Henning Kamp
7ce296cf04 Remove debug printout of major/minor numbers, print name instead. 2005-02-27 21:16:26 +00:00
Scott Long
05d0bf79ed Remove the last vestiges of the userconfig option. None of this actually
did anything, so this commit should be considered a NO-OP.
2004-12-01 04:59:33 +00:00
Poul-Henning Kamp
95bc568977 Add new function ttyinitmode() which sets our systemwide default
modes on a tty structure.

Both the ".init" and the current settings are initialized allowing
the function to be used both at attach and open time.

The function takes an argument to decide if echoing should be enabled.
Echoing should not be enabled for regular physical serial ports
unless they are consoles, in which case they should be configured
by ttyconsolemode() instead.

Use the new function throughout.
2004-10-18 21:51:27 +00:00
Poul-Henning Kamp
097afe9133 Fix echo in console mode. 2004-10-14 08:58:28 +00:00
Jacques Vidrine
e618ea0cdb Disallow negative coordinates and sizes in the syscons CONS_SCRSHOT
ioctl.

Reported by:	Christer Oberg <christer.oberg@deprotect.com>
2004-09-29 21:36:07 +00:00
Peter Wemm
beafe28690 Implement the KDENABIO etc ioctl's for amd64 as well. 2004-09-24 01:19:11 +00:00
Peter Wemm
d88cc59371 Implement the syscons mouse pointer characters for amd64. It was only
implemented for i386 and alpha.
2004-09-24 01:18:22 +00:00
Dag-Erling Smørgrav
7ba04507e6 Just because we have a serial console attached does not mean we don't
want a splash screen.

There seems to be some confusion in the syscons code as to the meaning of
the SC_KERNEL_CONSOLE flag.  Its absence is sometimes interpreted to mean
"I am not the system console", and sometimes to mean "I am not the only
VGA console" (see the font loading code for an example of the latter).
Someone with better syscons fu than myself should take a closer look.
2004-08-05 23:54:04 +00:00
Scott Long
76c31ef98f Document machdep.enable_panic_key.
Submitted by: Craig Rodrigues
2004-08-02 02:07:56 +00:00
Alexander Kabaev
1f74490224 Avoid casts as lvalues. 2004-07-28 06:30:43 +00:00
Poul-Henning Kamp
672c05d49c Preparation commit for the tty cleanups that will follow in the near
future:

rename ttyopen() -> tty_open() and ttyclose() -> tty_close().

We need the ttyopen() and ttyclose() for the new generic cdevsw
functions for tty devices in order to have consistent naming.
2004-07-15 20:47:41 +00:00
Poul-Henning Kamp
3e019deaed Do a pass over all modules in the kernel and make them return EOPNOTSUPP
for unknown events.

A number of modules return EINVAL in this instance, and I have left
those alone for now and instead taught MOD_QUIESCE to accept this
as "didn't do anything".
2004-07-15 08:26:07 +00:00
Stefan Farfeleder
439dfb0c35 Remove erroneous semicolons. 2004-07-13 16:06:19 +00:00