Commit Graph

91 Commits

Author SHA1 Message Date
Alexander Motin
4902e14dc8 Improve CAM_CDB_POINTER support.
MFC after:	2 weeks
2017-01-13 08:31:55 +00:00
Conrad Meyer
8532d381a9 Add BUF_TRACKING and FULL_BUF_TRACKING buffer debugging
Upstream the BUF_TRACKING and FULL_BUF_TRACKING buffer debugging code.
This can be handy in tracking down what code touched hung bios and bufs
last. The full history is especially useful, but adds enough bloat that
it shouldn't be enabled in release builds.

Function names (or arbitrary string constants) are tracked in a
fixed-size ring in bufs. Bios gain a pointer to the upper buf for
tracking. SCSI CCBs gain a pointer to the upper bio for tracking.

Reviewed by:	markj
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D8366
2016-10-31 23:09:52 +00:00
Warner Losh
336b7b6665 Fix mismerge and add NVME xport support to devstat (or rather, exclude
it from SCSI).

MFC after: 1 week
2016-07-21 03:11:36 +00:00
Warner Losh
f24c011beb Commit the bits of nda that were missed. This should fix the build.
Approved by: re@
2016-06-10 06:04:53 +00:00
Warner Losh
baabaca31b New NVMe front end (nda). 2016-06-09 22:39:02 +00:00
Warner Losh
bbb19fc720 Add place holder for SDIO CAM stuff for CCB XPT type.
Sponsored by: Netflix
2016-06-09 16:05:56 +00:00
Warner Losh
7b05c3e3c1 Add NVME IO type. 2016-06-09 16:05:49 +00:00
Don Lewis
95320acebc Fix multiple Coverity Out-of-bounds access false postive issues in CAM
The currently used idiom for clearing the part of a ccb after its
header generates one or two Coverity errors for each time it is
used.  All instances generate an Out-of-bounds access (ARRAY_VS_SINGLETON)
error because of the treatment of the header as a two element array,
with a pointer to the non-existent second element being passed as
the starting address to bzero().  Some instances also alsp generate
Out-of-bounds access (OVERRUN) errors, probably because the space
being cleared is larger than the sizeofstruct ccb_hdr).

In addition, this idiom is difficult for humans to understand and
it is error prone.  The user has to chose the proper struct ccb_*
type (which does not appear in the surrounding code) for the sizeof()
in the length calculation.  I found several instances where the
length was incorrect, which could cause either an actual out of
bounds write, or incompletely clear the ccb.

A better way is to write the code to clear the ccb itself starting
at sizeof(ccb_hdr) bytes from the start of the ccb, and calculate
the length based on the specific type of struct ccb_* being cleared
as specified by the union ccb member being used.  The latter can
normally be seen in the nearby code.  This is friendlier for Coverity
and other static analysis tools because they will see that the
intent is to clear the trailing part of the ccb.

Wrap all of the boilerplate code in a convenient macro that only
requires a pointer to the desired union ccb member (or a pointer
to the union ccb itself) as an argument.

Reported by:	Coverity
CID:		1007578, 1008684, 1009724, 1009773, 1011304, 1011306
CID:		1011307, 1011308, 1011309, 1011310, 1011311, 1011312
CID:		1011313, 1011314, 1011315, 1011316, 1011317, 1011318
CID:		1011319, 1011320, 1011321, 1011322, 1011324, 1011325
CID:		1011326, 1011327, 1011328, 1011329, 1011330, 1011374
CID:		1011390, 1011391, 1011392, 1011393, 1011394, 1011395
CID:		1011396, 1011397, 1011398, 1011399, 1011400, 1011401
CID:		1011402, 1011403, 1011404, 1011405, 1011406, 1011408
CID:		1011409, 1011410, 1011411, 1011412, 1011413, 1011414
CID:		1017461, 1018387, 1086860, 1086874, 1194257, 1229897
CID:		1229968, 1306229, 1306234, 1331282, 1331283, 1331294
CID:		1331295, 1331535, 1331536, 1331539, 1331540, 1341623
CID:		1341624, 1341637, 1341638, 1355264, 1355324
Reviewed by:	scottl, ken, delphij, imp
MFH:		1 month
Differential Revision:	https://reviews.freebsd.org/D6496
2016-05-24 00:57:11 +00:00
Alexander Motin
96b5475b7a Pass task management response information from CTL through CAM to isp(4),
utilizing previously unused arg field of struct ccb_notify_acknowledge.

This makes new QUERY TASK, QUERY TASK SET and QUERY ASYNC EVENT requests
really functional for CAM target mode drivers.
2016-05-20 10:26:12 +00:00
Edward Tomasz Napierala
d68fae5849 Add "camcontrol reprobe" subcommand, and implement it for da(4).
This makes it possible to manually force updating capacity data
after the disk got resized. Without it it might be neccessary to
reboot before FreeBSD notices updated disk size under eg VMWare.

Discussed with:	imp@
MFC after:	1 month
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D6108
2016-05-10 15:46:33 +00:00
Warner Losh
916d57dfc5 Implement Auxiliary register. Add PIM_ATA_EXT flag to flag that a SIM
can handle it, and add the code to add it to the FIS that's sent to
the drive. The mvs driver is the only other ATA driver in the system,
and its hardware doesn't appear to support setting the Auxiliary
register.

Differential Revision: https://reviews.freebsd.org/D5598
2016-04-17 05:24:36 +00:00
Warner Losh
e4cc6558b3 tag_action is not used at all in ata. It's set to 1 for ordered
transactions, but that value isn't used. It's bogusly used to report
in devstat, due to a cut and paste error from SCSI. Mark it as unused
in cam_fill_ataio. Reclaim the memory as a new ata_flags. In addition,
tag_id and init_id are completely unused, so reclaim those as 'unused'
now too. These were needlessly copied when ata was split from scsi.

This allows us, in the future, to create structures that can
communicate AUXILIARY regsiter to the SIMs, which cannot be done now.

Differential Revision: https://reviews.freebsd.org/D5598
2016-04-17 05:24:28 +00:00
Warner Losh
a6e0c5da99 New CAM I/O scheduler for FreeBSD. The default I/O scheduler is the same
as before. The common scheduling bits have moved from inline code in
each of the CAM periph drivers into a library that implements the
default scheduling.

In addition, a number of rate-limiting and I/O preference options can
be enabled by adding CAM_IOSCHED_NETFLIX to your config file. A number
of extra stats are also maintained. CAM_IOSCHED_NETFLIX isn't on by
default because it uses a separate BIO_READ and BIO_WRITE queue, so
doesn't honor BIO_ORDERED between these two types of operations. We
already didn't honor it for BIO_DELETE, and we don't depend on
BIO_ORDERED between reads and writes anywhere in the system (it is
currently used with BIO_FLUSH in ZFS to make sure some writes are
complete before others start and as a poor-man's soft dependency in
one place in UFS where we won't be issuing READs until after the
operation completes). However, out of an abundance of caution, it
isn't enabled by default.

Plus, this also brings in NCQ TRIM support for those SSDs that support
it. A black list is also provided for known rogues that use NCQ trim
as an excuse to corrupt the drive. It was difficult to separate out
into a separate commit.

This code has run in production at Netflix for over a year now.

Sponsored by: Netflix, Inc
Differential Revision: https://reviews.freebsd.org/D4609
2016-04-14 21:47:58 +00:00
Warner Losh
4aa947cb70 Make sure we check for CAM_CDB_POINTER for all drivers. Also, for the
drivers I've touched, filter out CAM_CDB_PHYS.

Differential Revision: https://reviews.freebsd.org/D5585
2016-03-15 05:17:29 +00:00
Warner Losh
a2531862b8 Move to new value for XPT_GET_SIM_KNOB to avoid clash with XPT_ATA_IO. 2016-03-10 06:25:05 +00:00
Kenneth D. Merry
23d63288c2 The ccb_xflags enumeration was removed from FreeBSD/head in
r259397 (it contained the CAM_EXTLUN_VALID bit) and I added the
same type name with a different set of values back in r291716.

The old ccb_xflags enumeration still exists in FreeBSD stable/10.
Shift all of the new values by one bit to avoid compatibility
issues when merged to stable/10.

MFC after:	3 days
Sponsored by:	Spectra Logic
2015-12-07 21:04:27 +00:00
Kenneth D. Merry
a9934668aa Add asynchronous command support to the pass(4) driver, and the new
camdd(8) utility.

CCBs may be queued to the driver via the new CAMIOQUEUE ioctl, and
completed CCBs may be retrieved via the CAMIOGET ioctl.  User
processes can use poll(2) or kevent(2) to get notification when
I/O has completed.

While the existing CAMIOCOMMAND blocking ioctl interface only
supports user virtual data pointers in a CCB (generally only
one per CCB), the new CAMIOQUEUE ioctl supports user virtual and
physical address pointers, as well as user virtual and physical
scatter/gather lists.  This allows user applications to have more
flexibility in their data handling operations.

Kernel memory for data transferred via the queued interface is
allocated from the zone allocator in MAXPHYS sized chunks, and user
data is copied in and out.  This is likely faster than the
vmapbuf()/vunmapbuf() method used by the CAMIOCOMMAND ioctl in
configurations with many processors (there are more TLB shootdowns
caused by the mapping/unmapping operation) but may not be as fast
as running with unmapped I/O.

The new memory handling model for user requests also allows
applications to send CCBs with request sizes that are larger than
MAXPHYS.  The pass(4) driver now limits queued requests to the I/O
size listed by the SIM driver in the maxio field in the Path
Inquiry (XPT_PATH_INQ) CCB.

There are some things things would be good to add:

1. Come up with a way to do unmapped I/O on multiple buffers.
   Currently the unmapped I/O interface operates on a struct bio,
   which includes only one address and length.  It would be nice
   to be able to send an unmapped scatter/gather list down to
   busdma.  This would allow eliminating the copy we currently do
   for data.

2. Add an ioctl to list currently outstanding CCBs in the various
   queues.

3. Add an ioctl to cancel a request, or use the XPT_ABORT CCB to do
   that.

4. Test physical address support.  Virtual pointers and scatter
   gather lists have been tested, but I have not yet tested
   physical addresses or scatter/gather lists.

5. Investigate multiple queue support.  At the moment there is one
   queue of commands per pass(4) device.  If multiple processes
   open the device, they will submit I/O into the same queue and
   get events for the same completions.  This is probably the right
   model for most applications, but it is something that could be
   changed later on.

Also, add a new utility, camdd(8) that uses the asynchronous pass(4)
driver interface.

This utility is intended to be a basic data transfer/copy utility,
a simple benchmark utility, and an example of how to use the
asynchronous pass(4) interface.

It can copy data to and from pass(4) devices using any target queue
depth, starting offset and blocksize for the input and ouptut devices.
It currently only supports SCSI devices, but could be easily extended
to support ATA devices.

It can also copy data to and from regular files, block devices, tape
devices, pipes, stdin, and stdout.  It does not support queueing
multiple commands to any of those targets, since it uses the standard
read(2)/write(2)/writev(2)/readv(2) system calls.

The I/O is done by two threads, one for the reader and one for the
writer.  The reader thread sends completed read requests to the
writer thread in strictly sequential order, even if they complete
out of order.  That could be modified later on for random I/O patterns
or slightly out of order I/O.

camdd(8) uses kqueue(2)/kevent(2) to get I/O completion events from
the pass(4) driver and also to send request notifications internally.

For pass(4) devcies, camdd(8) uses a single buffer (CAM_DATA_VADDR)
per CAM CCB on the reading side, and a scatter/gather list
(CAM_DATA_SG) on the writing side.  In addition to testing both
interfaces, this makes any potential reblocking of I/O easier.  No
data is copied between the reader and the writer, but rather the
reader's buffers are split into multiple I/O requests or combined
into a single I/O request depending on the input and output blocksize.

For the file I/O path, camdd(8) also uses a single buffer (read(2),
write(2), pread(2) or pwrite(2)) on reads, and a scatter/gather list
(readv(2), writev(2), preadv(2), pwritev(2)) on writes.

Things that would be nice to do for camdd(8) eventually:

1.  Add support for I/O pattern generation.  Patterns like all
    zeros, all ones, LBA-based patterns, random patterns, etc. Right
    Now you can always use /dev/zero, /dev/random, etc.

2.  Add support for a "sink" mode, so we do only reads with no
    writes.  Right now, you can use /dev/null.

3.  Add support for automatic queue depth probing, so that we can
    figure out the right queue depth on the input and output side
    for maximum throughput.  At the moment it defaults to 6.

4.  Add support for SATA device passthrough I/O.

5.  Add support for random LBAs and/or lengths on the input and
    output sides.

6.  Track average per-I/O latency and busy time.  The busy time
    and latency could also feed in to the automatic queue depth
    determination.

sys/cam/scsi/scsi_pass.h:
	Define two new ioctls, CAMIOQUEUE and CAMIOGET, that queue
	and fetch asynchronous CAM CCBs respectively.

	Although these ioctls do not have a declared argument, they
	both take a union ccb pointer.  If we declare a size here,
	the ioctl code in sys/kern/sys_generic.c will malloc and free
	a buffer for either the CCB or the CCB pointer (depending on
	how it is declared).  Since we have to keep a copy of the
	CCB (which is fairly large) anyway, having the ioctl malloc
	and free a CCB for each call is wasteful.

sys/cam/scsi/scsi_pass.c:
	Add asynchronous CCB support.

	Add two new ioctls, CAMIOQUEUE and CAMIOGET.

	CAMIOQUEUE adds a CCB to the incoming queue.  The CCB is
	executed immediately (and moved to the active queue) if it
	is an immediate CCB, but otherwise it will be executed
	in passstart() when a CCB is available from the transport layer.

	When CCBs are completed (because they are immediate or
	passdone() if they are queued), they are put on the done
	queue.

	If we get the final close on the device before all pending
	I/O is complete, all active I/O is moved to the abandoned
	queue and we increment the peripheral reference count so
	that the peripheral driver instance doesn't go away before
	all pending I/O is done.

	The new passcreatezone() function is called on the first
	call to the CAMIOQUEUE ioctl on a given device to allocate
	the UMA zones for I/O requests and S/G list buffers.  This
	may be good to move off to a taskqueue at some point.
	The new passmemsetup() function allocates memory and
	scatter/gather lists to hold the user's data, and copies
	in any data that needs to be written.  For virtual pointers
	(CAM_DATA_VADDR), the kernel buffer is malloced from the
	new pass(4) driver malloc bucket.  For virtual
	scatter/gather lists (CAM_DATA_SG), buffers are allocated
	from a new per-pass(9) UMA zone in MAXPHYS-sized chunks.
	Physical pointers are passed in unchanged.  We have support
	for up to 16 scatter/gather segments (for the user and
	kernel S/G lists) in the default struct pass_io_req, so
	requests with longer S/G lists require an extra kernel malloc.

	The new passcopysglist() function copies a user scatter/gather
	list to a kernel scatter/gather list.  The number of elements
	in each list may be different, but (obviously) the amount of data
	stored has to be identical.

	The new passmemdone() function copies data out for the
	CAM_DATA_VADDR and CAM_DATA_SG cases.

	The new passiocleanup() function restores data pointers in
	user CCBs and frees memory.

	Add new functions to support kqueue(2)/kevent(2):

	passreadfilt() tells kevent whether or not the done
	queue is empty.

	passkqfilter() adds a knote to our list.

	passreadfiltdetach() removes a knote from our list.

	Add a new function, passpoll(), for poll(2)/select(2)
	to use.

	Add devstat(9) support for the queued CCB path.

sys/cam/ata/ata_da.c:
	Add support for the BIO_VLIST bio type.

sys/cam/cam_ccb.h:
	Add a new enumeration for the xflags field in the CCB header.
	(This doesn't change the CCB header, just adds an enumeration to
	use.)

sys/cam/cam_xpt.c:
	Add a new function, xpt_setup_ccb_flags(), that allows specifying
	CCB flags.

sys/cam/cam_xpt.h:
	Add a prototype for xpt_setup_ccb_flags().

sys/cam/scsi/scsi_da.c:
	Add support for BIO_VLIST.

sys/dev/md/md.c:
	Add BIO_VLIST support to md(4).

sys/geom/geom_disk.c:
	Add BIO_VLIST support to the GEOM disk class.  Re-factor the I/O size
	limiting code in g_disk_start() a bit.

sys/kern/subr_bus_dma.c:
	Change _bus_dmamap_load_vlist() to take a starting offset and
	length.

	Add a new function, _bus_dmamap_load_pages(), that will load a list
	of physical pages starting at an offset.

	Update _bus_dmamap_load_bio() to allow loading BIO_VLIST bios.
	Allow unmapped I/O to start at an offset.

sys/kern/subr_uio.c:
	Add two new functions, physcopyin_vlist() and physcopyout_vlist().

sys/pc98/include/bus.h:
	Guard kernel-only parts of the pc98 machine/bus.h header with
	#ifdef _KERNEL.

	This allows userland programs to include <machine/bus.h> to get the
	definition of bus_addr_t and bus_size_t.

sys/sys/bio.h:
	Add a new bio flag, BIO_VLIST.

sys/sys/uio.h:
	Add prototypes for physcopyin_vlist() and physcopyout_vlist().

share/man/man4/pass.4:
	Document the CAMIOQUEUE and CAMIOGET ioctls.

usr.sbin/Makefile:
	Add camdd.

usr.sbin/camdd/Makefile:
	Add a makefile for camdd(8).

usr.sbin/camdd/camdd.8:
	Man page for camdd(8).

usr.sbin/camdd/camdd.c:
	The new camdd(8) utility.

Sponsored by:	Spectra Logic
MFC after:	1 week
2015-12-03 20:54:55 +00:00
Kenneth D. Merry
e8577fb489 Make sure that the flags for the XPT_DEV_ADVINFO CCB are initialized
properly.

If there is garbage in the flags field, it can sometimes include a
set CDAI_FLAG_STORE flag, which may cause either an error or
perhaps result in overwriting the field that was intended to be
read.

sys/cam/cam_ccb.h:
	Add a new flag to the XPT_DEV_ADVINFO CCB, CDAI_FLAG_NONE,
	that callers can use to set the flags field when no store
	is desired.

sys/cam/scsi/scsi_enc_ses.c:
	In ses_setphyspath_callback(), explicitly set the
	XPT_DEV_ADVINFO flags to CDAI_FLAG_NONE when fetching the
	physical path information.  Instead of ORing in the
	CDAI_FLAG_STORE flag when storing the physical path, set
	the flags field to CDAI_FLAG_STORE.

sys/cam/scsi/scsi_sa.c:
	Set the XPT_DEV_ADVINFO flags field to CDAI_FLAG_NONE when
	fetching extended inquiry information.

sys/cam/scsi/scsi_da.c:
	When storing extended READ CAPACITY information, set the
	XPT_DEV_ADVINFO flags field to CDAI_FLAG_STORE instead of
	ORing it into a field that isn't initialized.

sys/dev/mpr/mpr_sas.c,
sys/dev/mps/mps_sas.c:
	When fetching extended READ CAPACITY information, set the
	XPT_DEV_ADVINFO flags field to CDAI_FLAG_NONE instead of
	setting it to 0.

sbin/camcontrol/camcontrol.c:
	When fetching a device ID, set the XPT_DEV_ADVINFO flags
	field to CDAI_FLAG_NONE instead of 0.

sys/sys/param.h:
	Bump __FreeBSD_version to 1100061 for the new XPT_DEV_ADVINFO
	CCB flag, CDAI_FLAG_NONE.

Sponsored by:	Spectra Logic
MFC after:	1 week
2015-02-18 18:30:19 +00:00
Kenneth D. Merry
3bba3152a7 Add support for probing the SCSI VPD Extended Inquiry page (0x86).
This VPD page is effectively an extension of the standard Inquiry
data page, and includes lots of additional bits.

This commit includes support for probing the page in the SCSI probe code,
and an additional request type for the XPT_DEV_ADVINFO CCB.  CTL already
supports the Extended Inquiry page.

Support for querying this page in the sa(4) driver will come later.

sys/cam/scsi/scsi_xpt.c:
	Probe the Extended Inquiry page, if the device supports it, and
	return it in response to a XPT_DEV_ADVINFO CCB if it is requested.

sys/cam/scsi/cam_ccb.h:
	Define a new advanced information CCB data type, CDAI_TYPE_EXT_INQ.

sys/cam/cam_xpt.c:
	Free the extended inquiry data in a device when the device goes
	away.

sys/cam/cam_xpt_internal.h:
	Add an extended inquiry data pointer and length to struct cam_ed.

sys/sys/param.h
	Bump __FreeBSD_version for the addition of the new
	CDAI_TYPE_EXT_INQ advanced information type.

Sponsored by:	Spectra Logic
MFC after:	1 week
2015-02-05 00:12:21 +00:00
Alexander Motin
959ec2581b Update CAM CCB accounting for the new status quo.
devq_openings counter lost its meaning after allocation queues has gone.
held counter is still meaningful, but problematic to update due to separate
locking of CCB allocation and queuing.

To fix that replace devq_openings counter with allocated counter.  held is
now calculated on request as difference between number of allocated, queued
and active CCBs.

MFC after:	1 month
2014-09-14 11:59:49 +00:00
Nathan Whitehorn
92be6c51f0 Widen lun_id_t to 64 bits. This is a follow-on to r257345 to let the kernel
support all valid SAM-5 LUN IDs. CAM_VERSION is bumped, as the CAM ABI
(though not API) is changed. No behavior is changed relative to r257345
except that LUNs with non-zero high 32 bits will no longer be ignored
during device enumeration for SIMs that have set PIM_EXTLUNS.

Reviewed by:	scottl
2013-12-14 22:07:40 +00:00
Alexander Motin
227d67aa54 Merge CAM locking changes from the projects/camlock branch to radically
reduce lock congestion and improve SMP scalability of the SCSI/ATA stack,
preparing the ground for the coming next GEOM direct dispatch support.

Replace big per-SIM locks with bunch of smaller ones:
 - per-LUN locks to protect device and peripheral drivers state;
 - per-target locks to protect list of LUNs on target;
 - per-bus locks to protect reference counting;
 - per-send queue locks to protect queue of CCBs to be sent;
 - per-done queue locks to protect queue of completed CCBs;
 - remaining per-SIM locks now protect only HBA driver internals.

While holding LUN lock it is allowed (while not recommended for performance
reasons) to take SIM lock.  The opposite acquisition order is forbidden.
All the other locks are leaf locks, that can be taken anywhere, but should
not be cascaded.  Many functions, such as: xpt_action(), xpt_done(),
xpt_async(), xpt_create_path(), etc. are no longer require (but allow) SIM
lock to be held.

To keep compatibility and solve cases where SIM lock can't be dropped, all
xpt_async() calls in addition to xpt_done() calls are queued to completion
threads for async processing in clean environment without SIM lock held.

Instead of single CAM SWI thread, used for commands completion processing
before, use multiple (depending on number of CPUs) threads.  Load balanced
between them using "hash" of the device B:T:L address.

HBA drivers that can drop SIM lock during completion processing and have
sufficient number of completion threads to efficiently scale to multiple
CPUs can use new function xpt_done_direct() to avoid extra context switch.
Make ahci(4) driver to use this mechanism depending on hardware setup.

Sponsored by:	iXsystems, Inc.
MFC after:	2 months
2013-10-21 12:00:26 +00:00
Nathan Whitehorn
b559575358 Make sure the CCB xflags field is initialized to zero so that
CAM_EXTLUN_VALID is not erroneously set. Also add an XPORT_SRP
identifier to the known SCSI transports for the SCSI RDMA protocol, as
used, for example with Infiniband storage.

Reviewed by:	scottl
Approved by:	re (marius)
2013-09-27 16:02:40 +00:00
Scott Long
f564de00f7 Re-do r255853. Along with adding back the API/ABI changes from the
original, this hides the contents of cam_compat.h from ktrace/kdump/truss,
avoiding problems there.  There are no user-servicable parts in there, so
no need for those tools to be groping around in there.

Approved by:	re
2013-09-25 15:55:56 +00:00
Glen Barber
0082e54e9d Revert r255853 pending fixes to build errors in usr.bin/kdump
Approved by:	re (implicit)
2013-09-25 01:48:45 +00:00
Scott Long
185884259b Update the CAM API for FreeBSD 10:
- Remove the timeout_ch field.  It's been deprecated since FreeBSD 7.0;
  MPSAFE drivers should be managing their own timeout storage.  The
  remaining non-MPSAFE drivers have been modified to also manage their own
  storage, and should be considered for updating to MPSAFE (or removal)
  during the FreeBSD 10.x lifecycle.

- Add fields related to soft timeouts and quality of service, to be used
  in upcoming work.

- Add room for more flags in the CCB header and path_inq structures.

- Begin support for extended 64-bit LUNs.

- Bump the CAM version number to 0x18, but add compat shims.  Tested with
  camcontrol and smartctl.

Reviewed by:    nathanw, ken, kib
Approved by:    re
Obtained from:  Netflix
2013-09-24 16:50:53 +00:00
Kenneth D. Merry
b01773b0f1 CAM and mps(4) driver scanning changes.
Add a PIM_NOSCAN flag to the CAM path inquiry CCB.  This tells CAM
not to perform a rescan on a bus when it is registered.

We now use this flag in the mps(4) driver.  Since it knows what
devices it has attached, it is more efficient for it to just issue
a target rescan on the targets that are attached.

Also, remove the private rescan thread from the mps(4) driver in
favor of the rescan thread already built into CAM.  Without this
change, but with the change above, the MPS scanner could run before
or during CAM's initial setup, which would cause duplicate device
reprobes and announcements.

sys/param.h:
	Bump __FreeBSD_version to 1000039 for the inclusion of the
	PIM_RESCAN CAM path inquiry flag.

sys/cam/cam_ccb.h:
sys/cam/cam_xpt.c:
	Added a PIM_NOSCAN flag.  If a SIM sets this in the path
	inquiry ccb, then CAM won't rescan the bus in
	xpt_bus_regsister.

sys/dev/mps/mps_sas.c
	For versions of FreeBSD that have the PIM_NOSCAN path
	inquiry flag, don't freeze the sim queue during scanning,
	because CAM won't be scanning this bus.  Instead, hold
	up the boot.  Don't call mpssas_rescan_target in
	mpssas_startup_decrement; it's redundant and I don't
	know why it was in there.

	Set PIM_NOSCAN in path inquiry CCBs.

	Remove methods related to the internal rescan daemon.

	Always use async events to trigger a probe for EEDP support.
	In older versions of FreeBSD where AC_ADVINFO_CHANGED is
	not available, use AC_FOUND_DEVICE and issue the
	necessary READ CAPACITY manually.

	Provide a path to xpt_register_async() so that we only
	receive events for our own SCSI domain.

	Improve error reporting in cases where setup for EEDP
	detection fails.

sys/dev/mps/mps_sas.h:
	Remove softc flags and data related to the scanner thread.

sys/dev/mps/mps_sas_lsi.c:
	Unconditionally rescan the target whenever a device is added.

Sponsored by:	Spectra Logic
MFC after:	1 week
2013-07-22 18:37:07 +00:00
Jung-uk Kim
54eb21db1f Make it little bit more C++ friendly. This explicit casting fixes some
ports, emulators/virtualbox-ose and sysutils/smartmontools for example.
2013-07-04 05:58:53 +00:00
Scott Long
e64112de60 Introduce accessors for the ccb status word. Convert one (of many more)
modules to use it, will convert the others once the appropriate shed
color is selected by consensus.

Obtained from:	Netflix
MFC after:	3 days
2013-06-29 17:48:59 +00:00
Scott Long
25a2902c04 Add infrastructure for doing compatibility shims, as has been sorely
needed for the last 10 years.  Far too much of the internal API is
exposed, and every small adjustment causes applications to stop working.
To kick this off, bump the API version to 0x17 as should have been done
with r246713, but add shims to compensate.  Thanks to the shims, there
should be no visible change in application behavior.

I have plans to do a significant overhaul of the API to harnen it for
the future, but until then, I welcome others to add shims for older
versions of the API.

Obtained from:	Netflix
2013-06-17 08:57:09 +00:00
Alexander Motin
cccf422080 MFprojects/camlock r248890, r248897, r248898, r248900, r248903, r248905,
r248917, r248918, r248978, r249001, r249014, r249030:

Remove multilevel freezing mechanism, implemented to handle specifics of
the ATA/SATA error recovery, when post-reset recovery commands should be
allocated when queues are already full of payload requests.  Instead of
removing frozen CCBs with specified range of priorities from the queue
to provide free openings, use simple hack, allowing explicit CCBs over-
allocation for requests with priority higher (numerically lower) then
CAM_PRIORITY_OOB threshold.

Simplify CCB allocation logic by removing SIM-level allocation queue.
After that SIM-level queue manages only CCBs execution, while allocation
logic is localized within each single device.

Suggested by:	gibbs
2013-04-14 09:28:14 +00:00
Marius Strobl
2e1eb33217 Unbreak ATA_NO_48BIT_DMA with ATA_CAM by treating 48-bit DMA as an
optional property with PATA transport.

Reviewed by:	mav
MFC after:	3 days
2013-04-06 13:39:02 +00:00
Konstantin Belousov
2649fcc1d8 Commit the removal of a whitespace to record the proper commit message
for the r248519:

For the cam-attached HBAs, allow the driver to specify that it accepts
the unmapped bio by the PIM_UNMAPPED flag.  The CAM passes the
CAM_DATA_BIO data transfer type request for the unmapped bio, and the
driver could use the bus_dmamap_load_ccb() as a helper to
transparently handle the ccb.

Sponsored by:	The FreeBSD Foundation
Reviewed by:	scottl
Tested by:	pho, scottl
2013-03-19 15:05:21 +00:00
Konstantin Belousov
abc1e60e0e Support unmapped i/o for the md(4).
The vnode-backed md(4) has to map the unmapped bio because VOP_READ()
and VOP_WRITE() interfaces do not allow to pass unmapped requests to
the filesystem. Vnode-backed md(4) uses pbufs instead of relying on
the bio_transient_map, to avoid usual md deadlock.

Sponsored by:	The FreeBSD Foundation
Tested by:	pho, scottl
2013-03-19 15:01:50 +00:00
Konstantin Belousov
dd0b4fb6d5 Reform the busdma API so that new types may be added without modifying
every architecture's busdma_machdep.c.  It is done by unifying the
bus_dmamap_load_buffer() routines so that they may be called from MI
code.  The MD busdma is then given a chance to do any final processing
in the complete() callback.

The cam changes unify the bus_dmamap_load* handling in cam drivers.

The arm and mips implementations are updated to track virtual
addresses for sync().  Previously this was done in a type specific
way.  Now it is done in a generic way by recording the list of
virtuals in the map.

Submitted by:	jeff (sponsored by EMC/Isilon)
Reviewed by:	kan (previous version), scottl,
	mjacob (isp(4), no objections for target mode changes)
Discussed with:	     ian (arm changes)
Tested by:	marius (sparc64), mips (jmallet), isci(4) on x86 (jharris),
	amd64 (Fabian Keil <freebsd-listen@fabiankeil.de>)
2013-02-12 16:57:20 +00:00
Alexander Motin
3631c6382f Implement media change notification for DA and CD removable media devices.
It includes three parts:
 1) Modifications to CAM to detect media media changes and report them to
disk(9) layer. For modern SATA (and potentially UAS) devices it utilizes
Asynchronous Notification mechanism to receive events from hardware.
Active polling with TEST UNIT READY commands with 3 seconds period is used
for incapable hardware. After that both CD and DA drivers work the same way,
detecting two conditions: "NOT READY: Medium not present" after medium was
detected previously, and "UNIT ATTENTION: Not ready to ready change, medium
may have changed". First one reported to disk(9) as media removal, second
as media insert/change. To reliably receive second event new
AC_UNIT_ATTENTION async added to make UAs broadcasted to all periphs by
generic error handling code in cam_periph_error().
 2) Modifications to GEOM core to handle media remove and change events.
Media removal handled by spoiling all consumers attached to the provider.
Media change event also schedules provider retaste after spoiling to probe
new media. New flag G_CF_ORPHAN was added to consumers to reflect that
consumer is in process of destruction. It allows retaste to create new
geom instance of the same class, while previous one is still dying.
 3) Modifications to some GEOM classes: DEV -- to report media change
events to devd; VFS -- to handle spoiling same as orphan to prevent
accessing replaced media. PART class already handles spoiling alike to
orphan.

Reviewed by:	silence on geom@ and scsi@
Tested by:	avg
Sponsored by:	iXsystems, Inc. / PC-BSD
MFC after:	2 months
2012-07-29 11:51:48 +00:00
Alexander Motin
b9c473b2ed Rewrite enabling NCQ for SATA devices in a way more alike to SCSI TCQ.
This allows to control it with `camcontrol negotiate adaX -T (en|dis)able`
on the fly, same as for SCSI devices.

Sponsored by:	iXsystems, Inc.
2012-06-02 08:29:07 +00:00
Alexander Motin
3089bb2e84 MFprojects/zfsd:
- Add low-level support for SATA Enclosure Management Bridge (SEMB)
devices -- SATA equivalents of the SCSI SES/SAF-TE devices.
 - Add some utility functions for SCSI SAF-TE devices access.

Sponsored by:	iXsystems, Inc.
2012-05-24 11:07:39 +00:00
Kenneth D. Merry
e6bd5983ca Add CAM infrastructure to allow reporting when a drive's long read capacity
data changes.

cam_ccb.h:	Add a new advanced information type, CDAI_TYPE_RCAPLONG,
		for long read capacity data.

cam_xpt_internal.h:
		Add a read capacity data pointer and length to struct cam_ed.

cam_xpt.c:	Free the read capacity buffer when a device goes away.
		While we're here, make sure we don't leak memory for other
		malloced fields in struct cam_ed.

scsi_all.c:	Update the scsi_read_capacity_16() to take a uint8_t * and
		a length instead of just a pointer to the parameter data
		structure.  This will hopefully make this function somewhat
		immune to future changes in the parameter data.

scsi_all.h:	Add some extra bit definitions to struct
		scsi_read_capacity_data_long, and bump up the structure
		size to the full size specified by SBC-3.

		Change the prototype for scsi_read_capacity_16().

scsi_da.c:	Register changes in read capacity data with the transport
		layer.  This allows the transport layer to send out an
		async notification to interested parties.  Update the
		dasetgeom() API.

		Use scsi_extract_sense_len() instead of
		scsi_extract_sense().

scsi_xpt.c:	Add support for the new CDAI_TYPE_RCAPLONG advanced
		information type.

		Make sure we set the physpath pointer to NULL after freeing
		it.  This allows blindly freeing it in the struct cam_ed
		destructor.

sys/param.h:	Bump __FreeBSD_version from 1000005 to 1000006 to make it
		easier for third party drivers to determine that the read
		capacity data async notification is available.

camcontrol.c,
mptutil/mpt_cam.c:
		Update these for the new scsi_read_capacity_16() argument
		structure.

Sponsored by:	Spectra Logic
2012-01-26 18:09:28 +00:00
Kenneth D. Merry
1cc052e80f Add descriptor sense support to CAM, and honor sense residuals properly in
CAM.

Desriptor sense is a new sense data format that originated in SPC-3.  Among
other things, it allows for an 8-byte info field, which is necessary to
pass back block numbers larger than 4 bytes.

This change adds a number of new functions to scsi_all.c (and therefore
libcam) that abstract out most access to sense data.

This includes a bump of CAM_VERSION, because the CCB ABI has changed.
Userland programs that use the CAM pass(4) driver will need to be
recompiled.

camcontrol.c:	Change uses of scsi_extract_sense() to use
		scsi_extract_sense_len().

		Use scsi_get_sks() instead of accessing sense key specific
		data directly.

scsi_modes:	Update the control mode page to the latest version (SPC-4).

scsi_cmds.c,
scsi_target.c:	Change references to struct scsi_sense_data to struct
		scsi_sense_data_fixed.  This should be changed to allow the
		user to specify fixed or descriptor sense, and then use
		scsi_set_sense_data() to build the sense data.

ps3cdrom.c:	Use scsi_set_sense_data() instead of setting sense data
		manually.

cam_periph.c:	Use scsi_extract_sense_len() instead of using
		scsi_extract_sense() or accessing sense data directly.

cam_ccb.h:	Bump the CAM_VERSION from 0x15 to 0x16.  The change of
		struct scsi_sense_data from 32 to 252 bytes changes the
		size of struct ccb_scsiio, but not the size of union ccb.
		So the version must be bumped to prevent structure
		mis-matches.

scsi_all.h:	Lots of updated SCSI sense data and other structures.

		Add function prototypes for the new sense data functions.

		Take out the inline implementation of scsi_extract_sense().
		It is now too large to put in a header file.

		Add macros to calculate whether fields are present and
		filled in fixed and descriptor sense data

scsi_all.c:	In scsi_op_desc(), allow the user to pass in NULL inquiry
		data, and we'll assume a direct access device in that case.

		Changed the SCSI RESERVED sense key name and description
		to COMPLETED, as it is now defined in the spec.

		Change the error recovery action for a number of read errors
		to prevent lots of retries when the drive has said that the
		block isn't accessible.  This speeds up reconstruction of
		the block by any RAID software running on top of the drive
		(e.g. ZFS).

		In scsi_sense_desc(), allow for invalid sense key numbers.
		This allows calling this routine without checking the input
		values first.

		Change scsi_error_action() to use scsi_extract_sense_len(),
		and handle things when invalid asc/ascq values are
		encountered.

		Add a new routine, scsi_desc_iterate(), that will call the
		supplied function for every descriptor in descriptor format
		sense data.

		Add scsi_set_sense_data(), and scsi_set_sense_data_va(),
		which build descriptor and fixed format sense data.  They
		currently default to fixed format sense data.

		Add a number of scsi_get_*() functions, which get different
		types of sense data fields from either fixed or descriptor
		format sense data, if the data is present.

		Add a number of scsi_*_sbuf() functions, which print
		formatted versions of various sense data fields.  These
		functions work for either fixed or descriptor sense.

		Add a number of scsi_sense_*_sbuf() functions, which have a
		standard calling interface and print the indicated field.
		These functions take descriptors only.

		Add scsi_sense_desc_sbuf(), which will print a formatted
		version of the given sense descriptor.

		Pull out a majority of the scsi_sense_sbuf() function and
		put it into scsi_sense_only_sbuf().  This allows callers
		that don't use struct ccb_scsiio to easily utilize the
		printing routines.  Revamp that function to handle
		descriptor sense and use the new sense fetching and
		printing routines.

		Move scsi_extract_sense() into scsi_all.c, and implement it
		in terms of the new function, scsi_extract_sense_len().
		The _len() version takes a length (which should be the
		sense length - residual) and can indicate which fields are
		present and valid in the sense data.

		Add a couple of new scsi_get_*() routines to get the sense
		key, asc, and ascq only.

mly.c:		Rename struct scsi_sense_data to struct
		scsi_sense_data_fixed.

sbp_targ.c:	Use the new sense fetching routines to get sense data
		instead of accessing it directly.

sbp.c:		Change the firewire/SCSI sense data transformation code to
		use struct scsi_sense_data_fixed instead of struct
		scsi_sense_data.  This should be changed later to use
		scsi_set_sense_data().

ciss.c:		Calculate the sense residual properly.  Use
		scsi_get_sense_key() to fetch the sense key.

mps_sas.c,
mpt_cam.c:	Set the sense residual properly.

iir.c:		Use scsi_set_sense_data() instead of building sense data by
		hand.

iscsi_subr.c:	Use scsi_extract_sense_len() instead of grabbing sense data
		directly.

umass.c:	Use scsi_set_sense_data() to build sense data.

		Grab the sense key using scsi_get_sense_key().

		Calculate the sense residual properly.

isp_freebsd.h:	Use scsi_get_*() routines to grab asc, ascq, and sense key
		values.

		Calculate and set the sense residual.

MFC after:	3 days
Sponsored by:	Spectra Logic Corporation
2011-10-03 20:32:55 +00:00
Justin T. Gibbs
3501942bbe Lay groundwork in CAM for recording and reporting physical path and
other device attributes stored in the CAM Existing Device Table (EDT).
This includes some infrastructure requried by the enclosure services
driver to export physical path information.

Make the CAM device advanced info interface accept store requests.

  sys/cam/scsi/scsi_all.c:
  sys/cam/scsi/scsi_all.h:
	- Replace scsi_get_sas_addr() with a scsi_get_devid() which takes
	  a callback that decides whether to accept a particular descriptor.
	  Provide callbacks for NAA IEEE Registered addresses and for SAS
	  addresses, replacing the old function.  This is needed because
	  the old function doesn't work for an enclosure address for a SAS
	  device, which is not flagged as a SAS address, but is NAA IEEE
	  Registered.  It may be worthwhile merging this interface with the
	  devid match interface.
	- Add a few more defines for some device ID fields.

  sbin/camcontrol/camcontrol.c:
	- Update for the CCB_DEV_ADVINFO interface change.

  cam/cam_xpt_internal.h:
	- Add the new fields for the physical path string to the CAM EDT.
  cam/cam_ccb.h:
	- Rename CCB_GDEV_ADVINFO to simply CCB_DEV_ADVINFO, and the ccb
	  structure to ccb_dev_advinfo.
	- Add a flag that changes this CCB's action to store, rather than
	  the default, retrieve.
	- Add a new buffer type, CDAI_TYPE_PHYS_PATH, for the new CAM EDT
	  physpath field.
	- Remove the never-implemented transport & proto flags.
  cam/cam_xpt.c:
  cam/cam_xpt.h:
	- Add xpt_getattr(), which provides a wrapper for fetching a device's
	  attribute using the GEOM strings as key.  This method currently
	  supports "GEOM::ident" and "GEOM::physpath".

Submitted by: will
Reviewed by : gibbs

Extend the XPT_DEV_MATCH api to allow a device search by device ID.
As far as the API is concerned, device ID is a binary blob to be
interpreted by the transport layer.  The SCSI implementation assumes
it is an array of VPD device ID descriptors.

  sys/cam/cam_ccb.h:
	Create a new structure, device_id_match_pattern, and
	update the XPT_DEV_MATCH datastructures and flags so
	that this pattern type can be used.

  sys/cam/cam_xpt.c:
	- A single pattern matching on both inquiry data and device
	  ID is invalid.  Report any violators.
	- Pass device ID match requests through to the new routine
	  scsi_devid_match().  The direct call of a SCSI routine is
	  a layering violation, but no worse than the one a few
	  lines up that checks inquiry data.  Defer cleaning this
	  up until our future, larger, rototilling of CAM.
	- Zero out cam_ed and cam_et nodes on allocation.  Prior to
	  this change, device_id_len and device_id were not inialized,
	  preventing proper detection of the presence of this
	  information.

  sys/cam/scsi/scsi_all.c:
  sys/cam/scsi/scsi_all.h:
	Add the scsi_match_devid() routine.

Add a helper function for extracting peripherial driver names

  sys/cam/cam_periph.c:
  sys/cam/cam_periph.h:
	Add the cam_periph_list() method which fills an sbuf
	with a comma delimited list of the peripheral instances
	associated with a given CAM path.

Add a helper functions for SCSI commands used by the SES driver.

  sys/cam/scsi/scsi_all.c:
  sys/cam/scsi/scsi_all.h:
	Add structure definitions and csio filling functions for
	the receive diagnostic results and send diagnostic commands.

Misc CAM XPT cleanups.

  sys/cam/cam_xpt.c:
	Broadcast AC_FOUND_DEVICE and AC_PATH_REGISTERED
	events at the time async event handlers are attached
	even when registering just for events on a partitular
	SIM.  Previously, you had to register for these
	events on all SIMs in the system in order to get
	the initial broadcast even though subsequent device
	and path arrivals would be delivered.

  sys/cam/cam_xpt.c:
	Remove SIM mutex held asserts from path accessors.
	CAM paths are reference counted and it is this
	reference count, not the sim mutex, that garantees
	they are stable.

Sponsored by: Spectra Logic Corporation
2011-06-14 14:53:17 +00:00
Alexander Motin
b8b6b5d37a Make CAM report devices with ATA/SATA transport to devstat(9) as IDE. 2011-04-14 21:25:32 +00:00
Alexander Motin
8d169381e4 Improve SATA Asynchronous Notification feature support in CAM:
- make SATA SIMs announce capabilities to handle SDB with Notification bit;
 - make PMP driver honor this SIMs capability;
 - make SATA XPT to negotiate and enable this feature for ATAPI devices.

This feature allows supporting SATA ATAPI devices to inform system about
some events happened, that may require attention. In my case this allows
LG GH22LS50 SATA DVR-RW drive to report tray open/close events. Events
reported to CAM in form of AC_SCSI_AEN async. Further they could be used
as a hints for checking device status and reporting media change to upper
layers, for example, via spoiling mechanism of GEOM.
2011-04-13 16:20:54 +00:00
Kenneth D. Merry
06e794928b Add Serial Management Protocol (SMP) passthrough support to CAM.
This includes support in the kernel, camcontrol(8), libcam and the mps(4)
driver for SMP passthrough.

The CAM SCSI probe code has been modified to fetch Inquiry VPD page 0x00
to determine supported pages, and will now fetch page 0x83 in addition to
page 0x80 if supported.

Add two new CAM CCBs, XPT_SMP_IO, and XPT_GDEV_ADVINFO.  The SMP CCB is
intended for SMP requests and responses.  The ADVINFO is currently used to
fetch cached VPD page 0x83 data from the transport layer, but is intended
to be extensible to fetch other types of device-specific data.

SMP-only devices are not currently represented in the CAM topology, and so
the current semantics are that the SIM will route SMP CCBs to either the
addressed device, if it contains an SMP target, or its parent, if it
contains an SMP target.  (This is noted in cam_ccb.h, since it will change
later once we have the ability to have SMP-only devices in CAM's topology.)

smp_all.c,
smp_all.h:		New helper routines for SMP.  This includes
			SMP request building routines, response parsing
			routines, error decoding routines, and structure
			definitions for a number of SMP commands.

libcam/Makefile:	Add smp_all.c to libcam, so that SMP functionality
			is available to userland applications.

camcontrol.8,
camcontrol.c:		Add smp passthrough support to camcontrol.  Several
			new subcommands are now available:

			'smpcmd' functions much like 'cmd', except that it
			allows the user to send generic SMP commands.

			'smprg' sends the SMP report general command, and
			displays the decoded output.  It will automatically
			fetch extended output if it is available.

			'smppc' sends the SMP phy control command, with any
			number of potential options.  Among other things,
			this allows the user to reset a phy on a SAS
			expander, or disable a phy on an expander.

			'smpmaninfo' sends the SMP report manufacturer
			information and displays the decoded output.

			'smpphylist' displays a list of phys on an
			expander, and the CAM devices attached to those
			phys, if any.

cam.h,
cam.c:			Add a status value for SMP errors
			(CAM_SMP_STATUS_ERROR).

			Add a missing description for CAM_SCSI_IT_NEXUS_LOST.

			Add support for SMP commands to cam_error_string().

cam_ccb.h:		Rename the CAM_DIR_RESV flag to CAM_DIR_BOTH.  SMP
			commands are by nature bi-directional, and we may
			need to support bi-directional SCSI commands later.

			Add the XPT_SMP_IO CCB.  Since SMP commands are
			bi-directional, there are pointers for both the
			request and response.

			Add a fill routine for SMP CCBs.

			Add the XPT_GDEV_ADVINFO CCB.  This is currently
			used to fetch cached page 0x83 data from the
			transport later, but is extensible to fetch many
			other types of data.

cam_periph.c:		Add support in cam_periph_mapmem() for XPT_SMP_IO
			and XPT_GDEV_ADVINFO CCBs.

cam_xpt.c:		Add support for executing XPT_SMP_IO CCBs.

cam_xpt_internal.h:	Add fields for VPD pages 0x00 and 0x83 in struct
			cam_ed.

scsi_all.c:		Add scsi_get_sas_addr(), a function that parses
			VPD page 0x83 data and pulls out a SAS address.

scsi_all.h:		Add VPD page 0x00 and 0x83 structures, and a
			prototype for scsi_get_sas_addr().

scsi_pass.c:		Add support for mapping buffers in XPT_SMP_IO and
			XPT_GDEV_ADVINFO CCBs.

scsi_xpt.c:		In the SCSI probe code, first ask the device for
			VPD page 0x00.  If any VPD pages are supported,
			that page is required to be implemented.  Based on
			the response, we may probe for the serial number
			(page 0x80) or device id (page 0x83).

			Add support for the XPT_GDEV_ADVINFO CCB.

sys/conf/files:		Add smp_all.c.

mps.c:			Add support for passing in a uio in mps_map_command(),
			so we can map a S/G list at once.

			Add support for SMP passthrough commands in
			mps_data_cb().  SMP is a special case, because the
			first buffer in the S/G list is outbound and the
			second buffer is inbound.

			Add support for warning the user if the busdma code
			comes back with more buffers than will work for the
			command.  This will, for example, help the user
			determine why an SMP command failed if busdma comes
			back with three buffers.

mps_pci.c:		Add sys/uio.h.

mps_sas.c:		Add the SAS address and the parent handle to the
			list of fields we pull from device page 0 and cache
			in struct mpssas_target.  These are needed for SMP
			passthrough.

			Add support for the XPT_SMP_IO CCB.  For now, this
			CCB is routed to the addressed device if it supports
			SMP, or to its parent if it does not and the parent
			does.  This is necessary because CAM does not
			currently support SMP-only nodes in the topology.

			Make SMP passthrough support conditional on
			__FreeBSD_version >= 900026.  This will make it
			easier to MFC this change to the driver without
			MFCing the CAM changes as well.

mps_user.c:		Un-staticize mpi_init_sge() so we can use it for
			the SMP passthrough code.

mpsvar.h:		Add a uio and iovecs into struct mps_command for
			SMP passthrough commands.

			Add a cm_max_segs field to struct mps_command so
			that we can warn the user if busdma comes back with
			too many segments.

			Clear the cm_reply when a command gets freed.  If
			it is not cleared, reply frames will eventually get
			freed into the pool multiple times and corrupt the
			pool.  (This fix is from scottl.)

			Add a prototype for mpi_init_sge().

sys/param.h:		Bump __FreeBSD_version to 900026 for the for the
			inclusion of the XPT_GDEV_ADVINFO and XPT_SMP_IO
			CAM CCBs.
2010-11-30 22:39:46 +00:00
Alexander Motin
8edcf69406 Export PCI IDs of ATA/SATA controllers through CAM and ata(4) layers to
GEOM. This information needed for proper soft-RAID's on-disk metadata
reading and writing.
2010-07-25 15:43:52 +00:00
Matt Jacob
0e85f214e3 Add a new primitive, XPT_SCAN_TGT, to cover the range between scanning a
whole bus (XPT_SCAN_BUS) and a single lun on that bus (XPT_SCAN_LUN).

It's less resource comsumptive than scanning a whole bus when the
caller knows only one target has changes.

Reviewed by:	scsi@
Sponsored by:	Panasas
MFC after:	1 month
2010-05-26 22:49:42 +00:00
Alexander Motin
da6808c111 Make SATA XPT negotiate and enable some additional SATA features, such as:
- device initiated power management (some devices support only this way);
 - Automatic Partial to Slumber Transition (more power saving);
 - DMA auto-activation (expected to slightly improve performance).
More features could be added later, when hardware supports.
2010-05-02 12:07:47 +00:00
Alexander Motin
4cca153030 - Give ATA/SATA SIMs info about ATAPI packet size, supported by device.
- Make ATA XPT to reject longer SCSI CDBs then supported by device, or
any SCSI CDBs, if device doesn't support ATAPI.
2010-02-02 11:09:28 +00:00
Alexander Motin
83c5d981ac MFp4: Large set of CAM inprovements.
- Unify bus reset/probe sequence. Whenever bus attached at boot or later,
CAM will automatically reset and scan it. It allows to remove duplicate
code from many drivers.
- Any bus, attached before CAM completed it's boot-time initialization,
will equally join to the process, delaying boot if needed.
- New kern.cam.boot_delay loader tunable should help controllers that
are still unable to register their buses in time (such as slow USB/
PCCard/ CardBus devices), by adding one more event to wait on boot.
- To allow synchronization between different CAM levels, concept of
requests priorities was extended. Priorities now split between several
"run levels". Device can be freezed at specified level, allowing higher
priority requests to pass. For example, no payload requests allowed,
until PMP driver enable port. ATA XPT negotiate transfer parameters,
periph driver configure caching and so on.
- Frozen requests are no more counted by request allocation scheduler.
It fixes deadlocks, when frozen low priority payload requests occupying
slots, required by higher levels to manage theit execution.
- Two last changes were holding proper ATA reinitialization and error
recovery implementation. Now it is done: SATA controllers and Port
Multipliers now implement automatic hot-plug and should correctly
recover from timeouts and bus resets.
- Improve SCSI error recovery for devices on buses without automatic sense
reporting, such as ATAPI or USB. For example, it allows CAM to wait, while
CD drive loads disk, instead of immediately return error status.
- Decapitalize diagnostic messages and make them more readable and sensible.
- Teach PMP driver to limit maximum speed on fan-out ports.
- Make boot wait for PMP scan completes, and make rescan more reliable.
- Fix pass driver, to return CCB to user level in case of error.
- Increase number of retries in cd driver, as device may return several UAs.
2010-01-28 08:41:30 +00:00
Alexander Motin
b447e682d6 MFp4:
Improve ATA mode/SATA revision control.
2009-11-26 08:49:46 +00:00