Remove this debugging, it's not needed anymore and when not enabled,
those variables trigger a compiler warning.
Approved by: re (kib, blanket)
Pointy-hat-to: adrian, for not testing a non-debug compile of this code enough
allows it to be overridden at runtime.
Thus, add a function which updates ah_dfsDomain after a channel set
call to ath_hal_set_channels().
Approved by: re (kib, blanket)
channel list ends up with 2 entries, the HT and the legacy channel.
The scan itself is currently always done at legacy rates so we end
up receiving scan results for legacy networks on the HT channel and
erroneously assigning the BSS to the 11n channel. As the channel's
capabilities are used to setup the adapter we might end up with
non-working settings and/or firmware crashes.
Fix this by ensuring that scan results received on a HT channel
are only assigned to that channel if the htcap IE is available,
else use the legacy channel equivalent.
Tested by: Pawel Worach, Raoul Megelas, Maciej Milewski,
Andrei <az at azsupport dot com>
Approved by: re (kib)
and the Atheros reference code.
The radar detection code needs to know what the current DFS domain is.
Since net80211 doesn't currently know this information, it's extracted
from the HAL regulatory domain information.
The specifics:
* add a new ath_dfs API hook, ath_dfs_init_radar_filters(), which
updates the radar filters whenever the regulatory domain changes.
* add HAL_DFS_DOMAIN which describes the currently configured DFS domain .
* add a new HAL internal variable which tracks the currently configured
HAL DFS domain.
* add a new HAL capability, HAL_CAP_DFS_DMN, which returns the currently
configured HAL DFS domain setting.
* update the HAL DFS domain setting whenever the channel setting is
updated.
Since this isn't currently used by any radar code, these should all
be no-ops for existing users.
Obtained from: Atheros
Submitted by: KBC Networks, sibridge
Approved by: re (kib, blanket)
if 5ghz fast clock is enabled in the current operating mode.
It's slightly dirty, but it's part of the reference HAL and used by
the (currently closed-source) radar event code to map radar pulses
back to microsecond durations.
Obtained from: Atheros
Approved by: re (kib, blanket)
initialized by flags (function argument) or-ed with ifa->ifa_flags.
If both NIC has a loopback route to itself, so IFA_RTSELF is set on ifa(s).
As IFA_RTSELF is defined by RTF_HOST, rtrequest1_fib() is called with
RTF_HOST flag even if netmask is not NULL. Consequently, netmask is set
to zero in rtrequest1_fib(), and request to add network route is changed
under hands to request to add host route.
Tested by: Andrew Boyer <aboyer at averesystems.com>
Submitted by: Svatopluk Kraus <onwahe at gmail dot com>
Approved by: re (hrs)
Partial merge of 2431 from trunk: Retry writes on EINTR.
This should fix the SIGINT handler in bsdtar.
Note: The rest of r2431 can't be merged, since it interacts
with a big write-side rearchitecture.
PR: bin/149409
Reviewed by: kientzle
Approved by: re (kib)
MFC after: 3 days
NFSCL, NFSD instead of NFSCLIENT, NFSSERVER since
NFSCL and NFSD are now the defaults. The client change is
needed for diskless configurations, so that the root
mount works for fstype nfs.
Reported by seanbru at yahoo-inc.com for i386/XEN.
Approved by: re (hrs)
ints. That fixes a first bug where pmcstat wasn't using the old
cpumask_t interface and now also brings the full support for more
than 32 cpus.
While here, make the functions pmcstat_clone_event_descriptor() and
pmcstat_get_cpumask() private to pmcstat.
The problem of assuming cpu dense masks still persists and should be
eventually fixed, as reported by avg.
Tested by: pluknet
Reviewed by: gnn
Approved by: re (kib)
in order to account for LP64 targets when cross-debugging on ILP32,
allowing r224683 to compile on ILP32.
Note that thr_p{read,write}_{long,ptr}() still incorrectly use the size
of the respective types on the host rather than that on the target when
accessing the target address space which still needs to be fixed. This
means that r224683 alone may not be sufficient to solve the problem it's
intended to fix when cross-debugging.
Approved by: re (hrs)
violated ECMA-119 (ISO9660): allow reserved4 to be 0x20 in PVD.
This allows tar to read FreeBSD distribution ISO images created
with makefs prior to NetBSD bin/45217 bugfix (up to 9.0-BETA1).
In addition, merge following important bugfixes from
libarchive's release/2.8 branch:
Revision 2812:
Merge 2811 from trunk: Don't try to verify that compression-level=0
produces larger results than the default compression, since this isn't
true for all versions of liblzma.
Revision 2817:
Merge 2814 from trunk: Fix Issue 121 (mtree parser error)
http://code.google.com/p/libarchive/issues/detail?id=121
Revision 2820:
Fix issue 119.
Change the file location check that a file location does not exceed
volume block. New one is that a file content does not exceed volume
block(end of an ISO image). It is better than previous check even
if the issue did not happen.
While reading an ISO image generated by an older version of mkisofs
utility, a file location indicates the end the ISO image if its file
size is zero and it is the last file of all files of the ISO image,
so it is possible that the location value is the same as the number
of the total block of the ISO image.
http://code.google.com/p/libarchive/issues/detail?id=119
Revision 2955:
Issue 134: Fix libarchive 2.8 crashing in archive_write_finish() when
the open has failed and we're trying to write Zip format.
http://code.google.com/p/libarchive/issues/detail?id=134
Revision 2958:
Followup on Issue 134:
1) Port test_open_failure to libarchive 2.8 branch to test
the problem reported in Issue 134.
This test also shows that archive_read_open() sometimes
fails to report open errors correctly.
2) Fix the bug in archive_read.c
3) Comment out the tests that close functions are invoked
promptly when open fails; that's fully fixed in libarchive 3.0,
but I don't think it's worth fixing here.
Revision 3484:
Use uintmax_t with %ju
Revision 3487:
Fix issue 163.
Correctly allocate enough memory for a input buffer saved.
http://code.google.com/p/libarchive/issues/detail?id=163
Revision 3542:
Merge 2516, 2536 from trunk: Allow path table offset values of
0 and 18, which are used by some ISO writers.
Reviewed by: kientzle
Approved by: re (kib)
MFC after: 3 days
makefs with -t cd9660 -o rockridge against directories with
deep structure creates a corrupted cd9660 image.
http://gnats.netbsd.org/cgi-bin/query-pr-single.pl?number=44114
Fix NetBSD PR bin/45217:
makefs creates ISO9660 images that violate the ECMA-119 (ISO9660)
specification. This is caused by erroneously writing 32 bytes
with value 0x20 to the volume_set_id field and 128 bytes with value 0x20
to the the following 37-byte fields in the PVD:
copyright_file_id, abstract_file_id, bibliographic_file_id
This causes, among other unwanted results the reserved4 field to be
overwritten with the value 0x20. To comply with the specification,
this field muse be zero. As a result, all FreeBSD distribution
images created with makefs have not been 100% valid ISO9660 files.
http://gnats.netbsd.org/cgi-bin/query-pr-single.pl?number=45217
Reviewed by: kientzle
Approved by: re (kib)
Obtained from: NetBSD
MFC after: 3 days
Accessing it as an int causes failure on big-endian LP64, i.e. mips64be,
powerpc64 and sparc64.
Reviewed by: marcel
Approved by: re (kib)
MFC after: 1 week
When the last, possibly partially filled buffer is flushed, we didn't
reset fragsz to 0 and as such would stop reflecting reality.
- Use __FBSDID.
- Wrap a too long line.
Approved by: re (kib)
MFC after: 1 week
o get the physical address and size of the PBVM page table. This
can be found in the bootinfo structure, of which the physical
address is recorded as the ELF entry point.
o translate region 4 virtual addresses to physical addresses using
the PBVM page table.
In _kvm_kvatop() make the distinction between physical address and
core file offset a little clearer to avoid confusion. To further
enhance readability, always store the translated address into pa
so that it's obvious how the translation from va to pa happened.
Approved by: re (blanket)
comment out the NIS _compat options by default, but leave them in
the file for the convenience of users who want to enable it.
Update the comment in the file accordingly.
Reviewed by: ed
Approved by: re (hrs)
based on the patch in the PR, however he was unaware that they were
undocumented intentionally. This patch moves the information about
these alternates into a comment which also explains why they are
undocumented.
Approved by: re (hrs)
problem to solve is that we don't have a fixed mapping from kernel
text to physical address so that libkvm can bootstrap itself. We
solve this by passing the physical address of the bootinfo structure
to the consumer as the entry point of the core file. This way,
libkvm can extract the PBVM page table information and locate the
kernel in the core file.
We also need to dump memory chunks of type loader data, because
those hold the kernel and the PBVM page table (among other things).
Approved by: re (blanket)
catch and debug issues like the one fixed in the previous commit:
Replace all return statements with goto statements so that we end
up at a single place with a value for the physical address.
Print a message for all unknown KVA addresses.
Approved by: re (blanket)
Better construction of CPU mask in platform_cpu_mask().
Release cores still in reset when platform_start_ap() is called.
Reviewed by: imp, marcel
Obtained from: Juniper Networks, Inc
Author: Andrew Duane
Approved by: re (kib)
Even if we have CAP_FCHFLAGS, fchflags(2) fails on NFS. This is normal
and expected, so don't fail the test because of it.
Note that, whether or not we are on NFS, fchflags(2) should always fail
with ENOTCAPABLE if we are using a capability that does not have the
CAP_FCHFLAGS right.
Approved by: re (kib), mentor (rwatson)
Sponsored by: Google Inc
We already modify various configuration files in /etc based on build
configuration. This is not done for nsswitch.conf right now when setting
WITHOUT_NIS. This breaks various utilities, including crond, that depend
on working databases.
Approved by: re (kib)
MFC after: 1 month
doesn't operate on locked vnode. This could cause a panic.
Fix by unlocking vnode, re-locking afterwards and verifying that it wasn't
renamed or deleted. To improve readability and reduce code size, move code
to a new static function vfs_verify_global_path().
In addition, fix missing giant unlock in unmount().
Reported by: David Wolfskill <david@catwhisker.org>
Reviewed by: kib
Approved by: re (bz)
MFC after: 2 weeks
Add more regression testing, some of which is expected to fail until we
commit more kernel implementation.
Approved by: re (kib), mentor (rwatson)
Sponsored by: Google Inc
Add more regression testing, some of which is expected to fail until we
commit more kernel implementation.
Approved by: re (kib), mentor (rwatson)
Sponsored by: Google Inc
triggered by the same .o being included twice on the command line.
Found by: Nima Misaghian at Sandvine
Reviewed by: kientzle, kaiw
Approved by: re
MFC after: 1 week
the ar9130 code.
Since at least one kernel config specifies individual ath HAL chips
rather than just "device ath_hal" (arm/AVILA), I'm doing this so people
aren't caught out when they update to -HEAD or 9.0 and discover their
ath setup doesn't compile.
I'll revisit this with a proper fix sometime before 9.0-RELEASE.
Approved by: re (kib, blanket)
Pointed out by: ray@
Pointy hat to: adrian@
* Decouple the path supervision using a separate HB timer per path.
* Add support for potentially failed state.
* Bring back RTO.min to 1 second.
* Accept packets on IP-addresses already announced via an ASCONF
* While there: do some cleanups.
Approved by: re@
MFC after: 2 months.
col(1) was mangling the SGR escapes and is not strictly required.
See r222647, r222648, r222650, and r222653 for more details.
Reported by: delphij
Reviewed by: ru
Approved by: re (kib)
MFC after: 3 weeks
