1) In pci.c, we need to check the child device's state, not the parent
device's state.
2) In acpi_pci.c, we have to run the power state change after the acpi
method when the old_state is > new state, not the other way around.
Submitted by: Dmitry Remesov
PR: 65694
added an arbitrary delay to our readings, causing us to use the ACPI-safe
read method when not necessary. Submitted by: bde
Old:
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks BAD min = 3, max = 19, width = 16
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks BAD min = 3, max = 19, width = 16
ACPI timer looks GOOD min = 3, max = 5, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 1
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
New:
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
Also, reduce unnecesary overhead in ACPI-fast by remove the barrier for
reads. The timer in the ACPI-fast case is known to increase monotonically
so there is no need to serialize access to it.
gadgets (hotkeys, lcd, ...) on Asus laptops. I aim to closely track the
acpi4asus project which implements these features in the Linux kernel.
If this breaks your laptop, please let me know how it does it :-)
Approved by: njl (mentor)
workaround was for hardware where the clock was not latched, not for
hardware that was too slow. Also, make variable names more specific for ddb
printing.
what the ACPI-safe workaround is intended to fix. Requested by phk.
Set the bushandle and tag when attaching the timer, don't do it each time
in read_counter(). Pointed out by bde.
Move test_counter() to the end. Staticize acpi_timer_reg.
supported. Symptoms of this bug included unnecessary use of ACPI-safe
and a dmesg that has deltas of about 2^24:
ACPI timer looks BAD min = 2, max = 16777206, width = 16777204
ACPI timer looks BAD min = 2, max = 7, width = 5
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks BAD min = 2, max = 16777206, width = 16777204
ACPI timer looks BAD min = 2, max = 7, width = 5
ACPI timer looks BAD min = 2, max = 16777210, width = 16777208
ACPI timer looks BAD min = 4, max = 16777189, width = 16777185
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks BAD min = 2, max = 7, width = 5
ACPI timer looks BAD min = 4, max = 16777189, width = 16777185
To fix this:
* Use a 32 bit timecounter mask when the timer is 32 bits.
* In test_counter(), use the acpi_TimerDelta function which handles 24/32
bit timers and wraparound.
Miscellaneous fixes:
* Use C99 initializers for timecounter struct.
* Use u_int and uint32_t where appropriate instead of unsigned.
* Remove whitespace-only lines
* Remove the old PIIX4 PCI workaround. The timecounter testing code has
been in use for long enough to prove it's functional.
globally available. acpi_TimerDelta() subtracts two readings from the
ACPI PM timer and returns the difference. It properly distinguishes between
24-bit and 32-bit timers and handles wraparound.
a NULL crsbuf pointer. This shouldn't happen if it returns AE_OK. We'll
figure out why this is happening later.
Submitted by: Bruno Ducrot <ducrot@poupinou.org>
o Save and restore bars for suspend/resume as well as for D3->D0
transitions.
o preallocate resources that the PCI devices use to avoid resource
conflicts
o lazy allocation of resources not allocated by the BIOS.
o set unattached drivers to state D3. Set power state to D0
before probe/attach. Right now there's two special cases
for this (display and memory devices) that need work in other
areas of the tree.
Please report any bugs to me.
Reference objects changed from ACPI_TYPE_ANY to ACPI_TYPE_LOCAL_REFERENCE
in Oct. 2002, this may help systems where switching the cooler on failed.
We support both types for now until this sorts out.
some machines to enable wake events for more devices although I haven't
seen a system yet that uses this form. Also, introduce acpi_GetReference()
which retrieves an object reference from various types.
are enumerated in the ACPI device tree. In addition to the normal PCI
powerstate functionality, the ACPI _PSx methods are executed and ACPI
PowerResources are switched on and off via the acpi_pwr_switch_consumer()
function.
Glanced at by: imp, njl
is necessary because some IBMs use recursive methods (pointed out by
Robert Moore from Intel). The latter was a typo on my part. It was disabled
by default when it should have been enabled.
This completes the effort to handle dependent functions, which are used
in some machines for irq link resources. Also, clean up some nearby
comments while I'm at it.
The previous logic meant that if a user sets it to a minimal cooling value
acpi_thermal will not use higher cooling levels. Reverse the logic so that
the user requesting a level (say, 2) also gets 0 - 1 also.
PR: kern/61592
Submitted by: Andrew Thompson <andy@fud.org.nz>
even though the spec mandates this. Some have a value of 5 to indicate
throttling + C2 and some have 7 to indicate an extra C3 state. Support
throttling if the value is >= 4, C2 for >= 5, and C3 for >= 6.
Sort acpi debug values. Change "disable" to "disabled" to match rest of
the kernel. Remove debugging from acpi_toshiba since it was only used for
probe/attach.
Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.
Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
Free approx 86 major numbers with a mostly automatically generated patch.
A number of strategic drivers have been left behind by caution, and a few
because they still (ab)use their major number.
return events on the fixed handler even after defining a duplicate in the
AML. While this violates the spec, hopefully we can get by with leaving
both installed.
stopped returning events. Don't disable the event when removing
the handler because it still needs to be enabled for the other
handler. Also, remove duplicate AcpiEnableEvent calls since the
install function now does this for us.
is reserved by the loader, and thus any tunable name with that suffix will
be silently discarded.
Document this in the header and man page so that other developers do not
develop so many bumps on the head after banging it against the wall.
Detective work by: Mark Santcroos, grehan
systems define power/sleep buttons in both places but only deliver
notifies to the ones defined in the AML.
Also, reduce length of various function handler names.
PR:
Submitted by:
Reviewed by:
Approved by:
Obtained from:
MFC after:
it is still above the critical temperature on the next poll cycle. This
is a 10 second advance notice by default. Document the private
(non-standard) notify we will be using with devd(8).
the system. Also, decrease the poll interval to 10 seconds from 30
seconds. This is needed because some systems will report an invalid high
temperature for one poll cycle. It is suspected this is due to the
embedded controller timing out. A typical value is 138C for one cycle on a
system that is otherwise 65C. This prevents the system from prematurely
shutting down after one invalid reading. It will still shut down after 30
seconds of high temperature, which is the same as previous default
behavior.
Tested by: Scott Lambert <lambert AT lambertfam.org>
This should fix the problem with removing an address space handler
although we don't currently use that capability so it's unlikely anyone
saw this problem.
Implement this in acpi_MatchHid() and acpi_isa_get_compatid(). This
should fix mouse support for some users.
Move all users of AcpiGetObjectInfo() to use dynamic storage instead of
a devinfo on the stack. This is necessary since ACPI-CA needs to
allocate different sized arrays for the CompatList.
throttling values being available regardless of the CPU's capabilities.
This has been broken since rev 1.1. Also clarify a comment.
Submitted by: Taku YAMAMATO <taku@cent.saitama-u.ac.jp>
- Dynamically allocate the cpu_softc[] array based on mp_maxid instead of
using a statically sized array that depended on 'options SMP'.
- Use mp_maxid rather than MAXCPU when walking all the CPUs looking for a
match.
- Always call smp_rendezvous() since UP kernels now provide this.
- Use mp_ncpus rather than cpu_ndevices when determining if we need to
disable C3 for SMP machines.
Approved by: re (rwatson)
Reviewed by: njl
idx'th present CPU with pc_acpi_id equal to *acpi_id. If *acpi_id
does not match that processor's pc_acpi_id, return the value for
ProcId derived from the MADT in *acpi_id. If pc_acpi_id is 0xffffffff,
always override it with the value of *acpi_id. Finally, return
pc_cpuid in *cpu_id and use that as our primary key.
* Use pc_cpuid as our unique key because we know it is valid since
MD code set it. The values for ProcId in the ASL and MADT don't
match up on some machines (!), forcing us to fall back to ordered
probing in that case.
* Remove some #ifdef SMP since the refcount doesn't hurt performance
and will be needed for dynamic _CST objects. Only one #ifdef SMP
(for smp_rendezvous) remains.
* Hook up SMP in the compile flags in the Makefile.
Tested by: marcel, truckman
Approved by: re (scottl)
