Commit Graph

126 Commits

Author SHA1 Message Date
Brian Somers
10be78d3ae Remove whitespace at the end of lines. 2002-06-15 08:03:30 +00:00
Brian Somers
de59e178aa o Clean up some #includes
o Bump version number to 3.0.4
o When talking to a RADIUS server, provide a NAS-Port-Type.

  When the NAS-Port-Type is Ethernet, provide a NAS-Port value equal
  to the SESSIONID from the environment in direct mode or the
  NGM_PPPOE_SESSIONID message in other modes.  If no SESSIONID is found,
  default to the interface index in client mode or zero in server mode.

  When the NAS-Port-Type is ISDN, set the NAS-Port to the minor number
  of the physical device (ie, the N in /dev/i4brbchN).

  This makes it easier for the RADIUS server to identify the client
  WRT accounting data etc.

Prompted by:	lsz8425 <lsz8425@mail.cd.hn.cn>
2002-05-14 12:55:39 +00:00
Brian Somers
1136c6ac64 Back out the previous fix to deal with kernels that don't support IPv6,
and implement a far more subtle and correct fix.

The reason behind the infinite loop was that ppp was trying to make up
initial IPv6 numbers and wasn't giving up when it failed unexpectedly to
assign the addresses it just fabricated to it's interface (thinking that
the reason was because another interface was using the same address).
It now attempts this up to 100 times before just failing and trying to
muddle along (in reality, this should never happen more than a couple
of times unless our random number generator doesn't work).

Also, when IPv6 is not available, don't even try to assign the IPv6
interface address in the first place...
2001-08-18 19:07:13 +00:00
Brian Somers
c5109a323c Run correctly on a machine built without AF_INET6 support 2001-08-18 13:04:52 +00:00
Brian Somers
6de54bbe7a Fix a couple of forgotten comments 2001-08-16 02:00:55 +00:00
Brian Somers
30949fd4b5 o Add ipv6 support, abstracting most NCP addresses into opaque
structures (well, they're treated as opaque).

  It's now possible to manage IPv6 interface addresses and routing
  table entries and to filter IPV6 traffic whether encapsulated or
  not.

  IPV6CP support is crude for now, and hasn't been tested against
  any other implementations.

  RADIUS and IPv6 are independent of eachother for now.

  ppp.linkup/ppp.linkdown aren't currently used by IPV6CP

o Understand all protocols(5) in filter rules rather than only a select
  few.

o Allow a mask specification for the ``delete'' command.  It's now
  possible to specifically delete one of two conflicting routes.

o When creating and deleting proxy arp entries, do it for all IPv4
  interface addresses rather than doing it just for the ``current''
  peer address.

o When iface-alias isn't in effect, don't blow away manually (via ``iface
  add'') added interface addresses.

o When listening on a tcp server (diagnostic) socket, bind so that a
  tcp46 socket is created -- allowing both IPv4 and IPv6 connections.

o When displaying ICMP traffic, don't display the icmp type twice.
  When display traffic, display at least some information about unrecognised
  traffic.

o Bump version

Inspired after filtering work by: Makoto MATSUSHITA <matusita@jp.FreeBSD.org>
2001-08-14 16:05:52 +00:00
Brian Somers
6cf6ee7625 Add support for stateful MPPE (microsoft encryption) providing
encryption compatibility with Windows 2000.  Stateful encryption
uses less CPU but is bad on lossy transports.

The ``set mppe'' command has been expanded.  If it's used with any
arguments, ppp will insist on encryption, closing LCP if the other
end refuses.

Unfortunately, Microsoft have abused the CCP reset request so that
receiving a reset request does not result in a reset ack when using
MPPE...

Sponsored by:	Monzoon Networks AG and FreeBSD Services Limited
2001-06-18 15:00:22 +00:00
Brian Somers
65309e5cda Convert IIJ copyrights to BSD copyrights.
Approved by: Toshiharu OHNO <tohno@sirius.ocn.ne.jp>
2001-06-13 21:52:19 +00:00
Brian Somers
47fe010cf3 Fix an alignment error
PR:		27766
Submitted by:	Sudish Joseph <sudish@mindspring.com>
MFC after:	2 weeks
2001-05-30 15:52:24 +00:00
Brian Somers
da70ad6081 Handle IP over IP (IPPROTO_IPV4) properly.
We now unwrap IP/IP and apply filter rules to both the outer
  layer (with ``set filter blah x.x.x.x y.y.y.y ipip'') and to
  the payload (reinterpreted by the filter rules).

  ``set log tcp/ip'' will now show both the outer wrapper and
  the (reinterpreted) payload contents.
2001-04-24 02:13:34 +00:00
Brian Somers
26e6a622c0 MAXHOSTNAME includes space for a NUL 2001-03-09 20:31:02 +00:00
Brian Somers
5284761414 MAXPATHLEN -> PATH_MAX
Don't assume MAXHOSTNAMELEN includes the NUL
Correct a diagnostic
Use "localhost" in our prompt instead of ""
2001-03-08 23:51:50 +00:00
Brian Somers
2525421508 Fix some log_Printf() casting
Obtained from: NetBSD (pkgsrc)
2001-01-29 08:46:58 +00:00
Brian Somers
2231246bb3 Understand IPPROTO_ESP and IPPROTO_AH packets
Submitted by: Angelos D. Keromytis <angelos@dsl.cis.upenn.edu>
2000-09-14 18:01:54 +00:00
Brian Somers
06a43ce058 Add LogFILTER logging to log packets allowed by the dial filter and
dropped by any filter.

Submitted by: Mark Hannon <markhannon@one.net.au>

with some small tweaks by me.
2000-08-28 23:24:52 +00:00
Brian Somers
0a4b6c5c5c Allow a ``timeout secs'' filter option to let specific packet types
effect the idle timer in different ways.

Submitted by: Stefan Esser <se@freebsd.org>

With adjustments by me to document the option in the man page and to
give the same semantics for outgoing traffic as incoming.

I made the style more consistent in ip.c - this should really have
been done as a separate commit.
2000-07-11 22:11:36 +00:00
Brian Somers
9825166754 o Log the (payload/size) of all packet types, not just TCP packets
o  If the new ``filter-decapsulation'' is enabled, delve into UDP packets
   that contain 0xff 0x03 as the first two bytes, and if we recognise it
   as PROTO_IP, decapsulate it for the purpose of filter checking.

   If we recognise it as PROTO_<anything else> mention this for logging
   purposes only.

This change is aimed at people running PPPoUDP where the UDP traffic is
being sent over another PPP link.  It's desireable to have the top level
link connected all the time, but to have the bottom level link capable
of decapsulating the traffic and comparing the payload against the filters,
thus allowing ``set filter dial ...'' to work in tunnelled environments.

The caveat here is that the top ppp cannot employ any compression layers
without making the data unreadable for the bottom ppp.  ``disable deflate
pred1 vj'' and ``deny deflate pred1 vj'' is suggested.
2000-07-07 14:22:08 +00:00
Brian Somers
4c24043766 Allow ``set urgent none'' to disable all urgent ports and IPTOS_LOWDELAY
prioritisation.

Requested by: luigi
2000-06-08 20:07:48 +00:00
Brian Somers
b565321aa1 Log information about packets being dropped (probably due to
``nat deny_incoming yes'') by libalias.
2000-03-29 09:31:52 +00:00
Brian Somers
d6d3eeab46 When ppp can't identify the relevant name, don't use "???", use
<nnn> or <0xxxx> instead.
2000-03-14 01:46:54 +00:00
Brian Somers
52c9ca1968 Add ``set log dns'' to log DNS QUERY packets.
This is invaluable for dial-on-demand connections...
In ppp.linkup:

  set log -dns -tcp/ip

and in ppp.linkdown

  set log +dns +tcp/ip

giving a much better account of why the link came up.
2000-03-14 01:46:49 +00:00
Brian Somers
3a7b6d76a7 Handle the availability of TUNSIFHEAD. If it's there, use it.
For the moment this is just overhead, but it'll be used for INET6
support later.
2000-01-23 01:48:19 +00:00
Brian Somers
182c898a22 Add a bunch of `const's and fix a typo.
Submitted by: Rich Neswold <rneswold@MCS.Net>
1999-12-27 11:54:57 +00:00
Brian Somers
26af0ae966 Cosmetic: Make struct mbuf more like kernel mbufs. 1999-12-20 20:29:47 +00:00
Brian Somers
28149effa7 Support GRE packets
Submitted by: Harry Starr <starr@gccs.com.au>
1999-09-30 07:23:13 +00:00
Brian Somers
b9391689ee Back out the bogus #ifdef __NetBSD__ #include <signal.h> lines.
The original report was due to a mis-installation of the NetBS
header files :-/

Submitted by:	 Kazuyoshi Kato <kazk@yyy.or.jp>
1999-09-21 19:37:00 +00:00
Brian Somers
7e795ebe38 NetBSD has moved ``extern int errno;'' to signal.h :-/
Submitted by:	Kazuyoshi Kato <kazk@yyy.or.jp>
1999-09-20 07:36:46 +00:00
Brian Somers
4d9d17fe7d Correct the return from FilterCheck for fragments
PR:		13771
Submitted by:	Dean M. Phillips <dphill@inav.net>
1999-09-16 18:47:59 +00:00
Brian Somers
da47788649 Introduce a forth IP packet queue. Urgent packets with
ip_tos == IPTOS_LOWDELAY now get precidence over urgent
packets with ip_tos != IPTOS_LOWDELAY and non-urgent packets
with ip_tos == IPTOS_LOWDELAY.

Enhance the ``set urgent'' syntax to allow for urgent UDP
packets as well as urgent TCP packets.
1999-09-07 07:51:11 +00:00
Brian Somers
442f849547 o Split the two IPCP queues into three - one for FSM data
(LCP/CCP/IPCP), one for urgent IP traffic and one for
  everything else.
o Add the ``set urgent'' command for adjusting the list of
  urgent port numbers.  The default urgent ports are 21, 22,
  23, 513, 514, 543 and 544 (Ports 80 and 81 have been
  removed from the default priority list).
o Increase the buffered packet threshold from 20 to 30.
o Report the number of packets in the IP output queue and the
  list of urgent ports under ``show ipcp''.
1999-09-04 00:00:21 +00:00
Peter Wemm
97d92980a9 $Id$ -> $FreeBSD$ 1999-08-28 01:35:59 +00:00
Brian Somers
eb6e5e05f9 Add ISDN support via isdnd & i4b. This requires version
0.81.1 of the i4b code - namely support of the I4B_VR_REQ
ioctl via the i4brbchX device.

Ppp controls the phone number, but idle timers and
SYNC/RAW decisions are still made by isdnd (in isdnd.rc).

This involves a new datalink state machine phase.  The
``wait for carrier'' phase happens after dialing but
before logging in.  The whole dial state should really
be abstracted so that each device type can deal with it
in its own way (thinking about PPPoE) - but that'll have
to wait.

The ``set cd'' symantics remain the same for tty devices,
but we now delay until we either get CD or timeout waiting
(at which time we drop the link if we require CD).

For i4b devices we always insist on carrier.

Thanks to hm@ for his help, and especially for pointing out
that I *don't* need to re-implement isdnd (that was a huge
waste of time !) :-]
1999-08-06 20:04:08 +00:00
Brian Somers
62e85934b8 #ifdef IPPROTO_OSPFIGP before expecting it to be defined.
This unbreaks OpenBSD.
1999-08-02 15:29:19 +00:00
Brian Somers
2faae814fb Filter ospf and igmp separately.
Kind-of submitted by: phk
1999-08-02 11:53:16 +00:00
Brian Somers
cad7e7426a o Overhaul filtering, adding facilities to jump over rules and to
negate the sense of rules.
o Remove the redundant (and undocumented) ``host'' and ``port''
  words (README.changes updated).
o Don't permit (and ignore) garbage instead of the protocol.

Mostly submitted by:  Peter Jeremy <jeremyp@gsmx07.alcatel.com.au>
1999-07-27 23:44:00 +00:00
Brian Somers
1f9e5fe5fa Support `igmp' filters.
Mostly submitted by: Timo Geusch <freebsd@sleepycat.ukpeople.net>
1999-06-23 16:48:24 +00:00
Brian Somers
411675bae3 o Alter the mbuf type as it's processed by different layers.
o Show more information about missing MP fragments in ``show mp''.
o Do away with mbuf_Log().  It was showing mbuf stats twice on
  receipt of LCP/CCP/IPCP packets.... ???!!?
o Pre-allocate a bit extra when creating LQR packets to avoid having
  to allocate another mbuf in mbuf_Prepend().
1999-06-02 15:59:09 +00:00
Brian Somers
1d1fc0171e Remember if MYADDR or HISADDR is used in a filter add tweak all
filters any time either value changes.
1999-05-31 23:57:40 +00:00
Brian Somers
76d9853864 Ensure that we're not going to overflow our ``struct tun''
when we mbuf_Read() into it.
Add the link name to a few diagnostics.
1999-05-14 09:35:51 +00:00
Brian Somers
3377c28cd9 Deal with the fact that as we now mbuf_Read the fsm
header in fsm_Input() we often end up with a NULL mbuf.

Deal with a possible NULL mbuf being passed into
mbuf_Prepend().

Adjust some spacing to make things more consistent.
1999-05-09 20:02:29 +00:00
Brian Somers
5d9e610366 o Redesign the layering mechanism and make the aliasing code part of
the layering.

  We now ``stack'' layers as soon as we open the device (when we figure
  out what we're dealing with).  A static set of `dispatch' routines are
  also declared for dealing with incoming packets after they've been
  `pulled' up through the stacked layers.

  Physical devices are now assigned handlers based on the device type
  when they're opened.  For the moment there are three device types;
  ttys, execs and tcps.

o Increment version number to 2.2
o Make an entry in [uw]tmp for non-tty -direct invocations (after
  pap/chap authentication).
o Make throughput counters quad_t's
o Account for the absolute number of mbuf malloc()s and free()s in
  ``show mem''.
o ``show modem'' becomes ``show physical''.
1999-05-08 11:07:56 +00:00
Brian Somers
22d1222bab Make ports 80 & 81 ``interactive''. 1999-05-01 11:31:29 +00:00
Brian Somers
7884358fdd Add support for NetBSD 1999-04-26 08:54:34 +00:00
Brian Somers
aad80d9f1b Ensure that the thing we're casting to struct ip
is aligned for non-i386 architectures.
1999-03-29 08:21:28 +00:00
Brian Somers
972a1bcf5d Initial RADIUS support (using libradius). See the man page for
details.  Compiling with -DNORADIUS (the default for `release')
removes support.

TODO: The functionality in libradius::rad_send_request() needs
      to be supplied as a set of routines so that ppp doesn't
      have to wait indefinitely for the radius server(s).  Instead,
      we need to get a descriptor back, select() on the descriptor,
      and ask libradius to service it when necessary.
      For now, ppp blocks SIGALRM while in rad_send_request(), so
      it misses PAP/CHAP retries & timeouts if they occur.

      Only PAP is functional.  When CHAP is attempted, libradius
      complains that no User-Password has been specified... rfc2138
      says that it *mustn't* be used for CHAP :-(

Sponsored by: Internet Business Solutions Ltd., Switzerland
1999-01-28 01:56:34 +00:00
Brian Somers
2b81c773d8 Don't forget to initialise dbuff when debugging. 1998-11-10 00:32:39 +00:00
Brian Somers
1595bacdf6 Sync with OpenBSD ifdefs 1998-09-17 00:45:27 +00:00
Brian Somers
5a72b6eda3 Put the IP buffer queues into struct ipcp.
Forgotten by: me
1998-08-26 17:39:37 +00:00
Brian Somers
6f8e9f0a8a If we've got a full output buffer queue and cannot send
anything for two mintues (see ``set choked'' and ``show
bundle''), nuke the ip, mp and link level buffer queues.

This should fix problems where ``ppp -auto'' seems to stop
responding after failing to connect to the peer a few times.
1998-08-25 17:48:43 +00:00
Brian Somers
92b0955883 o Support callback types NONE, E.164, AUTH and CBCP.
(see the new ``set callback'' and ``set cbcp'' commands)
o Add a ``cbcp'' log level and mbuf type.
o Don't dump core when \T is given in ``set login'' or
  ``set hangup''.
o Allow ``*'' and blanks as placeholders in ppp.secret and
  allow a fifth field for specifying auth/cbcp dialback
  parameters.
o Remove a few extraneous #includes
o Define the default number of REQs (restart counter) in defs.h
  rather than hardcoding ``5'' all over the place.
o Fix a few man page inconsistencies.
1998-08-07 18:42:51 +00:00