The sysctl(HW_PAGESIZE) call cannot fail on FreeBSD kernels at least.
And even if it failed for some improbable reason, PAGE_SIZE is a safe
value to return.
Discussed with: jilles
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
patm(4) devices.
Maintaining an address family and framework has real costs when we make
infrastructure improvements. In the case of NATM we support no devices
manufactured in the last 20 years and some will not even work in modern
motherboards (some newer devices that patm(4) could be updated to
support apparently exist, but we do not currently have support).
With this change, support remains for some netgraph modules that don't
require NATM support code. It is unclear if all these should remain,
though ng_atmllc certainly stands alone.
Note well: FreeBSD 11 supports NATM and will continue to do so until at
least September 30, 2021. Improvements to the code in FreeBSD 11 are
certainly welcome.
Reviewed by: philip
Approved by: harti
The internal array size goes through a loop and is compared with numitems
which at its limits makes can be unreachably higher than arraysz.
Prevent an hypothetical overflow by matching the types.
MFC after: 1 week
Taking some hints from the regex variant in nvi(1) and higher-level
compiler warnings, update some types in our regex(3) implementation.
Joint work with: Kyle Evans
MFC after: 2 weeks
When application reads large directory, calling telldir() for each entry,
like Samba does, it creates exponential performance drop as number of
entries reach tenths to hundreds of thousands. It is caused by full search
through the internal list, that never finds matches in that scenario, but
creates O(n^2) delays. This patch optimizes that search, limiting it to
entries of the same buffer, turning time closer to O(n) in case of linear
directory scan.
PR: 218622
Reviewed by: jhb, jilles
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D10408
of the current usermode implementation of the POSIX semaphores.
For NSEMS_MAX, return -1 without changing errno, which indicates that
the variable has no limit. Before, sysconf(3) returned parameters
queried from the ksem(9) legacy implementation, which apparently has
low defaults for NSEMS_MAX.
Reported and tested by: jbeich
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The conditional jump can only be performed to targets up to 1MB in
either direction and does not work too well when linker places cerror
further that that from the caller. In that case linker will complain
about relocation overflows.
Reviewed by: emaste, andrew
Differential Revision: https://reviews.freebsd.org/D10305
9899:2011 Appendix K 3.7.4.1.
Other needed supporting types, defines and constraint_handler
infrastructure is added as specified in the C11 spec.
Submitted by: Tom Rix <trix@juniper.net>
Sponsored by: Juniper Networks
Discussed with: ed
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D9903
Differential revision: https://reviews.freebsd.org/D10161
Implement a new init(8) option in /etc/ttys. If this option is present
on the entry in /etc/ttys, the entry will be active if and only if it
exists. If the name starts with a '/', it will be considered an
absolute path. If not, it will be a path relative to /dev.
This allows one to turn off video console getty that aren't present
(while running a getty on them even when they aren't the system
console). Likewise with serial ports.
It differs from onifconsole in only requiring the device exist rather
than it be listed as one of the system consoles.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D10037
If opendir succeeds but malloc fails, numitems was used uninitialized in
error handling under the 'fail' label. If it happened to have a non-zero
value, the NULL 'names' was dereferenced.
Reported by: Coverity
CIDs: 1329566, 1372625
Sponsored by: Dell EMC Isilon
Add the CLOCK_PROCESS_CPUTIME_ID and CLOCK_THREAD_CPUTIME_ID clock_id
values to the clock_gettime(2) man page. Reformat the excessively
long paragraph (sentence!) into a tag list.
Reported by: jilles in https://reviews.freebsd.org/D10020
MFC after: 3 days
Sponsored by: Dell EMC
The failing test requires the zh_TW.Big5 locale, which is no longer
installed as of r315568.
Add a note/pointer just in case someone considers re-adding it.
Reported by: Jenkins
Sponsored by: Dell EMC Isilon
Add a clock_nanosleep() syscall, as specified by POSIX.
Make nanosleep() a wrapper around it.
Attach the clock_nanosleep test from NetBSD. Adjust it for the
FreeBSD behavior of updating rmtp only when interrupted by a signal.
I believe this to be POSIX-compliant, since POSIX mentions the rmtp
parameter only in the paragraph about EINTR. This is also what
Linux does. (NetBSD updates rmtp unconditionally.)
Copy the whole nanosleep.2 man page from NetBSD because it is complete
and closely resembles the POSIX description. Edit, polish, and reword it
a bit, being sure to keep any relevant text from the FreeBSD page.
Reviewed by: kib, ngie, jilles
MFC after: 3 weeks
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D10020
It is O(n) in the length of the haystack (big) string, and has special
cases for short needle (little) strings, of one to four bytes, to avoid
excessive overhead.
There are a small set of nearly trivial cases where the startup overhead
of the musl implementation makes it slightly slower -- for example, a 31
byte needle that matches the beginning of the haystack. It's faster for
non-trivial cases, and significantly so for inputs that trigger worst-
case behaviour of the previous implementation. As an example, in my
tests a 16K needle that matches the end of a 64K haystack is nearly
2000x faster with this implementation.
Reviewed by: bapt (earlier), ed (earlier)
Obtained from: musl (snapshot at commit c718f9fc)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2601
D8376 extended softfloat/hardfloat support, but used a macro that never
actually gets set except in libc and msun's Makefile.inc. So libc and libm
got built correctly, but any program including fenv.h itself assumed it was
on a hardfloat systen and emitted inline fpu instructions for
fedisableexcept() and friends.
Using __mips_soft_float makes everything work in all cases, since it's a
compiler-internal macro that is always set correctly for the target
PR: 217845
Submitted by: Dan Nelson <dnelson_1901@yahoo.com>
MFC after: 1 week
INHERIT_ZERO is an OpenBSD feature.
When a page is marked as such, it would be zeroed
upon fork().
This would be used in new arc4random(3) functions.
PR: 182610
Reviewed by: kib (earlier version)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D427
reallocarray(3) is a non portable extension that originated in OpenBSD.
Given that it is already in FreeBSD's libc it is useful for the cases
where reallocation involves a multiplication.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D9955
Unsign setlen: it is local and will never be negative. Having one more bit
for growth is beneficial and it avoids a cast when it's going to be used
for allocation.
Reviewed by: ngie
MFC after: 3 days
Rename nitems to numitems: it shares the anme with an existing macro in
sys/params.h. Also initialize the value later which avoids asigning the
value if we exit early.
Reviewed by: ngie
MFC after: 3 days
Dan Krejsa reports a potential memory leak in an fts_build error case,
detected by Coverity. (It doesn't seem to show up in Coverity Scan, so I
don't have a CID to point to.)
I don't know whether it is actually possible to arrive in this case with a
non-empty 'head' list. The cost is low, though. One additional branch in a
terminal error case isn't the end of the world.
PR: 217125
Submitted by: Dan Krejsa <dan.krejsa at gmail.com>
4.0.0 (branches/release_40 296509). The release will follow soon.
Please note that from 3.5.0 onwards, clang, llvm and lldb require C++11
support to build; see UPDATING for more information.
Also note that as of 4.0.0, lld should be able to link the base system
on amd64 and aarch64. See the WITH_LLD_IS_LLD setting in src.conf(5).
Though please be aware that this is work in progress.
Release notes for llvm, clang and lld will be available here:
<http://releases.llvm.org/4.0.0/docs/ReleaseNotes.html>
<http://releases.llvm.org/4.0.0/tools/clang/docs/ReleaseNotes.html>
<http://releases.llvm.org/4.0.0/tools/lld/docs/ReleaseNotes.html>
Thanks to Ed Maste, Jan Beich, Antoine Brodin and Eric Fiselier for
their help.
Relnotes: yes
Exp-run: antoine
PR: 215969, 216008
MFC after: 1 month
MDSRCS it intended to allow assembly versions of funtions with C
implementations listed in MISRCS. The selection of the correct
machdep_ldis?.c for a given architecture does not follow this pattern
and the file should be added to SRCS directly.
Reviewed by: emaste, imp, jhb
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9841
- Remove .c files which duplicate entries in MISRCS.
- Use the same, less merge conflict prone style in all cases.
- Use MDSRCS for mips (.c and .S files both ended up in SRCS).
- Remove pointless sparc64 Makefile.inc.
- Remove uninformative foreign VCS ID entries.
Reviewed by: emaste, imp, jhb
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9841
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
Also mention <time.h> in sem_timedwait(3), because POSIX does,
and because the user will need it for clockid_t, struct timespec,
and TIMER_ABSTIME.
Reported by: bde
MFC after: 9 days
X-MFC with: r314179
Sponsored by: Dell EMC
fail in the Capability mode. Instead silently fallback to the syscall
method, which is done for example in the gettimeofday(2) function.
Reviewed by: kib
This function allows the caller to specify the reference clock
and choose between absolute and relative mode. In relative mode,
the remaining time can be returned.
The API is similar to clock_nanosleep(3). Thanks to Ed Schouten
for that suggestion.
While I'm here, reduce the sleep time in the semaphore "child"
test to greatly reduce its runtime. Also add a reasonable timeout.
Reviewed by: ed (userland)
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9656
Although fp[get][set]sticky() functions are obsolete, they are still
required for GNU fortran49 library.
MFC after: 2 months
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D9634
Due to bug[1] in libcompiler_rt, all symbols declared by
DEFINE_AEABI_FUNCTION_ALIAS() are not hidden. All these but two
are explicitly exported from libc and don't causes problems.
Remaining two, __aeabi_uidiv and __aeabi_idiv, infecting all
non-versioned shared libraries. And these symbols are consumed
by many (if not all) packages[2].
As workaround, export these from libc as compatible symbols,
in global namespace. With this, these are still visible for
rtld, but static linker doesn't use then.
[1]
DEFINE_AEABI_FUNCTION_ALIAS() macro uses '.set' directive for
declaration of aliased symbol. Unfortunately, '.set' doesn't
inherit visibility of base symbol, and macro don't explicitly
sets visibility for aliased one.
[2]
Given symbols are exported from non-versioned libraries only if
library itself uses them. So, if world is built for CPU with
HW divide, these function are not used and given symbols are
not exported. By this, contents of these libraries is not stable,
and all packages fails to run.
Note: Due to r313823 I'm forced to commit this too early, without
leave enough time for proper review.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D9632
Now that <sys/event.h> can be included on its own, adjust the manual
page accordingly. Remove both unnecessary #include statements from the
synopsis and the example code.
While there, also add a note to the BUGS section to mention that
previous versions of this header file still depend on <sys/types.h>.
Reviewed by: ngie, vangyzen
Differential Revision: https://reviews.freebsd.org/D9605
NSS modules are loaded when nsswitch.conf is parsed and may register their
own atexit handlers with libc. nss_atexit() unloads any dynamically loaded
NSS modules, so it should run only after the modules' atexit handlers have
been invoked.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
since it is using type punning of union members, and clang does not yet
support gcc's extensions which allow this (refer to
https://gcc.gnu.org/onlinedocs/gcc/Optimize-Options.html#Type%2dpunning
for more information).
This should fix strtod(3) return values for the lang/julia port, so it
does not fail on an assertion during its build.
PR: 216770
For regular files and posix shared memory, POSIX requires that
[offset, offset + size) range is legitimate. At the maping time,
check that offset is not negative. Allowing negative offsets might
expose the data that filesystem put into vm_object for internal use,
esp. due to OFF_TO_IDX() signess treatment. Fault handler verifies
that the mapped range is valid, assuming that mmap(2) checked that
arithmetic gives no undefined results.
For device mappings, leave the semantic of negative offsets to the
driver. Correct object page index calculation to not erronously
propagate sign.
In either case, disallow overflow of offset + size.
Update mmap(2) man page to explain the requirement of the range
validity, and behaviour when the range becomes invalid after mapping.
Reported and tested by: royger (previous version)
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
The %t{d,u} (ptrdiff_t) tests fail for the following reasons:
- ptrdiff_t is by definition int32_t on !LP64 architectures and int64_t on
LP64 architectures.
- intmax_t is by definition fixed to int64_t on all architectures.
- Some of the code in lib/libc/stdio/... is promoting ptrdiff_t to *intmax_t
when parsing/representing the value.
PR: 191674
MFC after: 1 week
Sponsored by: Dell EMC Isilon
The reasoning here was the same as what was done in r313376:
- Gather as many results as possible instead of failing early and
not testing the rest of the cases.
- Simplify logic when checking test inputs vs outputs and printing
test result.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Don't exclude i386 from LDBL_MANT_DIG == 64; it works properly in
that case.
While here, replace strcmp + atf_tc_fail with ATF_CHECK_MSG for 2
reasons:
- Gather as many results as possible instead of failing early and
not testing the rest of the cases.
- Simplify logic when checking test inputs vs outputs and printing
test result.
Tested on: amd64, i386
MFC after: 1 week
Sponsored by: Dell EMC Isilon
- Add missing comma between functions that trigger ENOMEM error.
- Fix the description for ESRCH. The action that triggers this error is
FIND, not SEARCH (SEARCH does not exist).
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Document AF_UNIX control messages in unix(4) only, not split between unix(4)
and recv(2).
Also, warn about LOCAL_CREDS effective uid/gid fields, since the write could
be from a setuid or setgid program (with the explicit SCM_CREDS and
LOCAL_PEERCRED, the credentials are read at such a time that it can be
assumed that the process intends for them to be used in this context).
Reviewed by: wblock
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D9298
This reduces build output, need for recalculating paths, and makes it clearer
which paths are relative to what areas in the source tree. The change in
performance over a locally mounted UFS filesystem was negligible in my testing,
but this may more positively impact other filesystems like NFS.
LIBC_SRCTOP was left alone so Juniper (and other users) can continue to
manipulate lib/libc/Makefile (and other Makefile.inc's under lib/libc) as
include Makefiles with custom options.
Discussed with: marcel, sjg
MFC after: 1 week
Reviewed by: emaste
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D9207
As far as I can tell this was introduced in r72406 and updated in several
subsequent revisions, but the lib/locale directory it referenced never
existed.
Reviewed by: ngie
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D9252
This unbreaks the build because the assembly is written for x64.
MFC after: 3 weeks
X-MFC with: r312418
Pointyhat to: ngie
Reported by: Jenkins (i386 job)
Sponsored by: Dell EMC Isilon
The effect at runtime is negligible as the hyperv timer isn't available
except when hyperv is loaded.
This is a prerequisite for conditionalizing the header build/install out
of the build
MFC after: 3 weeks
Reviewed by: sephe
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D9242
- Add RATELIMIT kernel configuration keyword which must be set to
enable the new functionality.
- Add support for hardware driven, Receive Side Scaling, RSS aware, rate
limited sendqueues and expose the functionality through the already
established SO_MAX_PACING_RATE setsockopt(). The API support rates in
the range from 1 to 4Gbytes/s which are suitable for regular TCP and
UDP streams. The setsockopt(2) manual page has been updated.
- Add rate limit function callback API to "struct ifnet" which supports
the following operations: if_snd_tag_alloc(), if_snd_tag_modify(),
if_snd_tag_query() and if_snd_tag_free().
- Add support to ifconfig to view, set and clear the IFCAP_TXRTLMT
flag, which tells if a network driver supports rate limiting or not.
- This patch also adds support for rate limiting through VLAN and LAGG
intermediate network devices.
- How rate limiting works:
1) The userspace application calls setsockopt() after accepting or
making a new connection to set the rate which is then stored in the
socket structure in the kernel. Later on when packets are transmitted
a check is made in the transmit path for rate changes. A rate change
implies a non-blocking ifp->if_snd_tag_alloc() call will be made to the
destination network interface, which then sets up a custom sendqueue
with the given rate limitation parameter. A "struct m_snd_tag" pointer is
returned which serves as a "snd_tag" hint in the m_pkthdr for the
subsequently transmitted mbufs.
2) When the network driver sees the "m->m_pkthdr.snd_tag" different
from NULL, it will move the packets into a designated rate limited sendqueue
given by the snd_tag pointer. It is up to the individual drivers how the rate
limited traffic will be rate limited.
3) Route changes are detected by the NIC drivers in the ifp->if_transmit()
routine when the ifnet pointer in the incoming snd_tag mismatches the
one of the network interface. The network adapter frees the mbuf and
returns EAGAIN which causes the ip_output() to release and clear the send
tag. Upon next ip_output() a new "snd_tag" will be tried allocated.
4) When the PCB is detached the custom sendqueue will be released by a
non-blocking ifp->if_snd_tag_free() call to the currently bound network
interface.
Reviewed by: wblock (manpages), adrian, gallatin, scottl (network)
Differential Revision: https://reviews.freebsd.org/D3687
Sponsored by: Mellanox Technologies
MFC after: 3 months
sources to return timestamps when SO_TIMESTAMP is enabled. Two additional
clock sources are:
o nanosecond resolution realtime clock (equivalent of CLOCK_REALTIME);
o nanosecond resolution monotonic clock (equivalent of CLOCK_MONOTONIC).
In addition to this, this option provides unified interface to get bintime
(equivalent of using SO_BINTIME), except it also supported with IPv6 where
SO_BINTIME has never been supported. The long term plan is to depreciate
SO_BINTIME and move everything to using SO_TS_CLOCK.
Idea for this enhancement has been briefly discussed on the Net session
during dev summit in Ottawa last June and the general input was positive.
This change is believed to benefit network benchmarks/profiling as well
as other scenarios where precise time of arrival measurement is necessary.
There are two regression test cases as part of this commit: one extends unix
domain test code (unix_cmsg) to test new SCM_XXX types and another one
implementis totally new test case which exchanges UDP packets between two
processes using both conventional methods (i.e. calling clock_gettime(2)
before recv(2) and after send(2)), as well as using setsockopt()+recv() in
receive path. The resulting delays are checked for sanity for all supported
clock types.
Reviewed by: adrian, gnn
Differential Revision: https://reviews.freebsd.org/D9171
The previous code used to grab definitions from these openssl/openssh,
but this is no longer needed and is no longer correct. libnetbsd
provides all of the needed definitions
libnetbsd is added to CFLAGS automatically via netbsd-tests.test.mk --
hence all of CFLAGS can be cleared
This contains some new testcases in /usr/tests/...:
- .../lib/libc
- .../lib/libthr
- .../lib/msun
- .../sys/kern
Tested on: amd64, i386
MFC after: 1 month
drain timeout handling to historical freebsd behavior.
The primary reason for these changes is the need to have tty_drain() call
ttydevsw_busy() at some reasonable sub-second rate, to poll hardware that
doesn't signal an interrupt when the transmit shift register becomes empty
(which includes virtually all USB serial hardware). Such hardware hangs
in a ttyout wait, because it never gets an opportunity to trigger a wakeup
from the sleep in tty_drain() by calling ttydisc_getc() again, after
handing the last of the buffered data to the hardware.
While researching the history of changes to tty_drain() I stumbled across
some email describing the historical BSD behavior of tcdrain() and close()
on serial ports, and the ability of comcontrol(1) to control timeout
behavior. Using that and some advice from Bruce Evans as a guide, I've
put together these changes to implement the hardware polling and restore
the historical timeout behaviors...
- tty_drain() now calls ttydevsw_busy() in a loop at 10 Hz to accomodate
hardware that requires polling for busy state.
- The "new historical" behavior for draining during close(2) is retained:
the drain timeout is "1 second without making any progress". When the
1-second timeout expires, if the count of bytes remaining in the tty
layer buffer is smaller than last time, the timeout is extended for
another second. Unfortunately, the same logic cannot be extended all
the way down to the hardware, because the interface to that layer is a
simple busy/not-busy indication.
- Due to the previous point, an application that needs a guarantee that
all data has been transmitted must use TIOCDRAIN/tcdrain(3) before
calling close(2).
- The historical behavior of honoring the drainwait setting for TIOCDRAIN
(used by tcdrain(3)) is restored.
- The historical kern.drainwait sysctl to control the global default
drainwait time is restored, but is now named kern.tty_drainwait.
- The historical default drainwait timeout of 300 seconds is restored.
- Handling of TIOCGDRAINWAIT and TIOCSDRAINWAIT ioctls is restored
(this also makes the comcontrol(1) drainwait verb work again).
- Manpages are updated to document these behaviors.
Reviewed by: bde (prior version)
libstdc++ before gcc r244057 expected that libc provided
__cxa_thread_atexit_impl, and libstdc++ implemented
__cxa_thread_atexit, by forwarding the calls to _impl. Mentioned gcc
revision checks for __cxa_thread_atexit in libc and does not provide
the symbol from libstdc++ if found.
This change helps older gcc, in particular, all released versions
which implement thread_local, by consolidating the implementation into
libc. For that versions, if configured with the current libc, the
__cxa_thread_atexit is exported from libstdc++ as a trivial wrapper
around libc::__cxa_thread_atexit_impl.
The __cxa_thread_atexit implementation is put into separate source
file to allow for static linking with older libstdc++.a.
gcc bugzilla: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=78968
Reported by: Hannes Hauswedell <h2+fbsdports@fsfe.org>
PR: 215709
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
