Commit Graph

200498 Commits

Author SHA1 Message Date
Mark Johnston
ed09cc1b53 When in lazyload mode, write the DOF to a temporary file and rename it
rather than writing directly to the output file.

CID:	1147172
2015-05-17 03:50:42 +00:00
Allan Jude
caa3817d4f bsdinstall/zfsboot: Skip adding swap lines to /etc/fstab if swap is 0 sized
Differential Revision:	https://reviews.freebsd.org/D2571
Reviewed by:	dim
Approved by:	eadler (mentor)
Sponsored by:	ScaleEngine Inc.
2015-05-17 00:55:44 +00:00
Adrian Chadd
623d2d40af Increment the vm stats "v_intr" counter so the global system interrupt
statistics work again.

I'm not sure why/when this broke, only that it used to work fine.

This commit is brought to you by Maker Faire Bay Area 2015.
2015-05-16 23:51:24 +00:00
Enji Cooper
5956adf2c6 Fix more warnings related to missing headers
MFC after: 1 week
2015-05-16 22:53:26 +00:00
Warner Losh
d3eacc0e47 Don't allow unmapped I/O. The pmap isn't quite up to the task. Add a
comment to this effect and switch the default. My old AT91SAM9G20
now boots, fsck's the SD card and runs w/o an issue for the first
time since a 9.1-ish stable build I did a few years ago.

Problems with unmapped I/O:
o un-page-aligned I/O requests to devices fail (notably fsck
  and newfs).
o write-back caching was totally broken. write-through caching
  needed to be enabled.
o Even page-aligned I/O requests sometimes failed for reasons
  not thoroughly investigated.

Suggested by: ian@
MFC after: 2 days
2015-05-16 21:24:32 +00:00
Ian Lepore
7ca89258e5 Re-link ubldr when any of its libraries change. 2015-05-16 21:08:33 +00:00
Rui Paulo
fe3155baa8 acpi_ibm: whitespace. 2015-05-16 20:06:39 +00:00
Bjoern A. Zeeb
ccc1c723b6 More tr -d '\r' t make config happy and
some re-alignment whitespace changes.
2015-05-16 20:04:49 +00:00
Alexander V. Chernikov
5446b3f1d4 * Update SFF-8024 Identifier constants.
* Fix SFF_8436_CC_EXT in SFF-8436 memory map.
* Add SFF-8436/8636 bits (revision compliance/nominal bitrate).
* Do some small style/type fixes.
2015-05-16 13:11:35 +00:00
Rick Macklem
9896584a4b Add a warning message to mountd for exported file
systems that are automounted, since that configuration
isn't supported. This still allows the export, since
two emails I received felt that this should not be
disabled. It sends the message to syslog(LOG_ERR..), so that
it goes to the same places as the other messages related
to /etc/exports problems, even though it is a warning and not an error.

Reviewed by:	trasz
MFC after:	2 weeks
2015-05-16 12:05:26 +00:00
Andrew Rybchenko
c379e930e7 sfxge: avoid usage of ifm_data
The driver uses ifm_data to save capabilities mask calculated during
initialization when supported phy modes are discovered.
The patch simply calculates it when either media or options are changed.

Reviewed by:    glebius
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
Differential Revision: https://reviews.freebsd.org/D2540
2015-05-16 10:35:30 +00:00
Thomas Quinot
b9c6f643f1 Minor comments fixes 2015-05-16 10:31:15 +00:00
Bjoern A. Zeeb
73f1e30fa6 tr -d '\r' makes config a lot more happy. 2015-05-16 10:27:27 +00:00
Xin LI
e8a94f7104 path.h is not needed here. 2015-05-16 08:12:00 +00:00
Adrian Chadd
a4398ca081 Make these all work with the new way of doing privatelib.
Without these CFLAGS settings a cross-compile won't find the headers
anywhere.

Tested:

* mips (32, big endian) cross-build w/ LOCAL_DIRS including these
  tools.
2015-05-16 06:18:39 +00:00
Eitan Adler
6f55e69eb7 ssh-copy-id: Add missing line continuation
PR:		194301
Reported by:	pkubaj@riseup.net
Patch by:	Ross Kilgariff <rosskilgariff@gmail.com>
2015-05-16 06:15:49 +00:00
Andrew Rybchenko
ef97c04bc5 sfxge: add local variable with changed capabilities mask
It is required for the next patch which adds dependency of TSO
capabilities from Tx checksum offloads.

Reviewed by:    gnn
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
Differential Revision: https://reviews.freebsd.org/D2553
2015-05-16 06:04:53 +00:00
Adrian Chadd
64b9bdcf18 Various iwn(4) fixes.
* simplify channel logic for determining RF gain setting in scan setup
* don't set TX timer on error
* free node references for unsent frames on device stop
* set maxfrags to IWN_MAX_SCATTER-1 (first segment is used by TX command)
* add missing IWN_UNLOCK() from interrupt path when the hardware
  disappears.
* pass control frames to host
* nitems() instead of local macro

Tested:

* Intel 5100, STA mode

PR:		kern/196264
Submitted by:	Andriy Voskoboinyk <s3erios@gmail.com>
2015-05-16 05:59:25 +00:00
Andrew Rybchenko
0e4ebe6c4d sfxge: move mbuf free to sfxge_if_transmit()
It is a preparation to the next patch which will service packet queue even
if packet addtion fails.

Reviewed by:    gnn
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
Differential Revision: https://reviews.freebsd.org/D2552
2015-05-16 05:43:20 +00:00
Andrew Rybchenko
deee1de4bf sfxge: get rid of locked variable in sfxge_tx_packet_add()
Now each branch has one and only one possible TxQ lock state.
It simplifies understanding of the code.

Reviewed by:    gnn
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
Differential Revision: https://reviews.freebsd.org/D2551
2015-05-16 05:37:47 +00:00
Andrew Rybchenko
b5bae9f4f2 sfxge: support Rx checksum offloads disabling
We can't disable it in HW, but we can ignore result.
Discard Rx descriptor checksum flags if Rx checksum offload is off.

Reviewed by:    gnn
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
Differential Revision: https://reviews.freebsd.org/D2544
2015-05-16 05:36:40 +00:00
Dimitry Andric
8e7e3163be Provide reallocarray() in -legacy, if needed, to allow building head on
previous releases.

Also add a stdlib.h wrapper, which declares the function, otherwise the
compiler may assume it returns int, which can cause segfaults on LP64
architectures.

Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D2558
2015-05-15 22:19:35 +00:00
Adrian Chadd
4f5e270a93 Update the comments to match what the code ended up becoming.
-1 is now "no locality information available".

Sponsored by:	Norse Corp, Inc.
2015-05-15 21:33:19 +00:00
Pedro F. Giffuni
4ea76c2d38 Break apart the gnu_inline attribute and use "artificial" if available.
Missing #endif (in wrong place)

Pointed hat:	me
2015-05-15 20:53:43 +00:00
Pedro F. Giffuni
24bbddbbd1 Break apart the gnu_inline attribute and use "artificial" if available.
Missing #endif

Reported by:	jhb, jenkins
Pointed hat:	me
2015-05-15 20:47:25 +00:00
Pedro F. Giffuni
ee90489bc4 Make use of GCC alloc_align attribute
This lets the compiler know about the alignment of pointers returned
by aligned_alloc(3), posix_memalign(3). and contigmalloc(9)

Currently this is only supported in recent gcc but we are ready to
use it if clang implements it.

Relnotes:	yes
2015-05-15 20:43:37 +00:00
Pedro F. Giffuni
77ac67e29d Break apart the gnu_inline attribute and use "artificial" if available.
In general it is bad practice to use the gnu_inline attribute but we
will need it in special cases like FORTIFY_SOURCE. In this specific
case it is also useful to have the "artificial" attribute:

"This attribute is useful for small inline wrappers which if possible
should appear during debugging as a unit, depending on the debug info
format it will either mean marking the function as artificial or using the
caller location for all instructions within the inlined body."

This attribute appears to be currently implemented only in GCC. Use it
only in conjuntion with gnu_inline in the cases where it is available,
which is similar in spirit in how it's used in glibc.
2015-05-15 19:51:05 +00:00
Cy Schubert
d5d0d860fb Correct location for libntpevent.a. 2015-05-15 19:37:17 +00:00
Zbigniew Bodek
4d892e4f22 Introduce support for the Alpine PoC from Annapurna Labs
The Alpine Platform-On-Chip offers multicore processing
(quad ARM Cortex-A15), 1/10Gb Ethernet, SATA 3, PCI-E 3,
DMA engines, Virtualization, Advanced Power Management and other.

This code drop involves basic platform support including:
SMP, IRQs, SerDes, SATA. As of now it is missing the PCIe support.
Part of the functionality is provided by the low-level code (HAL)
delivered by the chip vendor (Annapurna Labs) and is a subject to
change in the future (is planned to be moved to sys/contrib directory).

The review log for this commit is available here:
https://reviews.freebsd.org/D2340

Reviewed by:    andrew, ian, imp
Obtained from:  Semihalf
Sponsored by:   Annapurna Labs
2015-05-15 18:25:48 +00:00
Ian Lepore
a8a4800fff Add assertions that the addresses passed to tlb maintenance are page-aligned.
Perform cache writebacks and invalidations in the correct (inner to outer
or vice versa) order, and add comments that explain that.

Consistantly use 'va' as the variable name for virtual addresses.

Submitted by:	Michal Meloun <meloun@miracle.cz>
2015-05-15 18:10:00 +00:00
Ian Lepore
a22f81968f Retrieve the cache parms in the proper arch-specific way.
Submitted by:	Michal Meloun <meloun@miracle.cz>
2015-05-15 18:07:58 +00:00
George V. Neville-Neil
a9b294b433 Summary: Remove spurious, extra, next header comments.
Correct the name of the pad length field.
2015-05-15 18:04:49 +00:00
Pedro F. Giffuni
1d8055035f Replace a CONSTCOND for a void value as a replacement for __unreachable builtin
This only applies if we are not using clang or gcc but it lets us use the
__unreachable() buitin in expressions.

Suggested by:	tijl
2015-05-15 17:51:03 +00:00
Baptiste Daroussin
d433cf9a8a Allow MANWIDTH to work with mandoc(1)
Reported by:	bdrewery
2015-05-15 15:56:28 +00:00
Patrick Kelsey
dd4fcbc594 When a netmap process terminates without the full set of buffers it
was granted via rings and ni_bufs_list_head represented in those rings
and lists (e.g., via SIGKILL), those buffers are no longer available
for subsequent users for the lifetime of the system. To mitigate this
resource leak, reset the allocator state when the last ref to that
allocator is released.

Note that this only recovers leaked resources for an allocator when
there are no longer any users of that allocator, so there remain
circumstances in which leaked allocator resources may not ever be
recovered - consider a set of multiple netmap processes that are all
using the same allocator (say, the global allocator) where members of
that set may be killed and restarted over time but at any given point
there is one member of that set running.

Based on intial work by adrian@.

Reviewed by: Giuseppe Lettieri (g.lettieri@iet.unipi.it), luigi
Approved by: jmallett (mentor)
MFC after: 1 week
Sponsored by: Norse Corp, Inc.
2015-05-15 15:36:57 +00:00
Ed Maste
810d5b3420 Build libgomp only if we're also building base system GCC
Clang's OpenMP support will emit Intel OpenMP API library calls,
and will therefore require libiomp (or whatever name is settled on).
An up-to-date version of libgomp is included in ports or pkg GCC.
Thus, there is no reason to build base libgomp without base system GCC.

PR:		199979 (exp-run)
Reviewed by:	pfg
Relnotes:	Yes
Sponsored by:	The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2459
2015-05-15 14:22:33 +00:00
Ruslan Bukin
a8c5ea04b4 Provide the number of interrupt resources added to the list
by using extra argument, so caller will know that.
2015-05-15 13:55:18 +00:00
John Baldwin
5c894ee2ef Previously, cv_waiters was only updated by cv_signal or cv_wait. If a
thread awakened due to a time out, then cv_waiters was not decremented.
If INT_MAX threads timed out on a cv without an intervening cv_broadcast,
then cv_waiters could overflow. To fix this, have each sleeping thread
decrement cv_waiters when it resumes.

Note that previously cv_waiters was protected by the sleepq chain lock.
However, that lock is not held when threads resume from sleep. In
addition, the interlock is also not always reacquired after resuming
(cv_wait_unlock), nor is it always held by callers of cv_signal() or
cv_broadcast(). Instead, use atomic ops to update cv_waiters. Since
the sleepq chain lock is still held on every increment, it should
still be safe to compare cv_waiters against zero while holding the
lock in the wakeup routines as the only way the race should be lost
would result in extra calls to sleepq_signal() or sleepq_broadcast().

Differential Revision:	https://reviews.freebsd.org/D2427
Reviewed by:	benno
Reported by:	benno (wrap of cv_waiters in the field)
MFC after:	2 weeks
2015-05-15 13:50:37 +00:00
Alexander Motin
5b157f2144 Close some potential races around socket start/close.
There are some reports about panics on ic->ic_socket NULL derefence.
This kind of races is the only way I can imagine it to happen.

MFC after:	2 weeks
2015-05-15 13:36:50 +00:00
Jason A. Harmening
64a8a34dea Bump date for iic.4 2015-05-15 13:04:14 +00:00
Alexander V. Chernikov
3d2f502bab Simplify i2c reader: we don't need per-NIC handler anymore.
Make code use read_i2c() function instead of callback.
Simplify&document struct i2c_info.
Consistently use uint8_t to read from i2c.
2015-05-15 12:32:17 +00:00
Jason A. Harmening
c71b2ff23d Update iic(4) man page to reflect recent changes
Differential Revision:	https://reviews.freebsd.org/D2461
Reviewed by:	wblock
Approved by:	kib (mentor)
2015-05-15 12:28:17 +00:00
Andrey V. Elsukov
c1b4f79dfa Add an ability accept encapsulated packets from different sources by one
gif(4) interface. Add new option "ignore_source" for gif(4) interface.
When it is enabled, gif's encapcheck function requires match only for
packet's destination address.

Differential Revision:	https://reviews.freebsd.org/D2004
Obtained from:	Yandex LLC
MFC after:	2 weeks
Sponsored by:	Yandex LLC
2015-05-15 12:19:45 +00:00
Konstantin Belousov
9be6046a47 Some third-party malloc(3) implementations use pthread_setspecific(3)
to handle per-thread information.  Since our pthread_setspecific()
implementation calls calloc(3) to allocate per-thread specific data
storage, things get complicated.

Switch the allocator to use bare mmap(2).  There is some loss of the
allocated page, since e.g. on amd64, PTHREAD_KEYS_MAX * sizeof(struct
pthread_specific_elem) is 3K (it actually spans whole page due to
padding), but I believe it is more acceptable than additional code for
specialized allocator().

The alternatives would either to make the specific data array be part of
the struct thread, or use internal bindings to call the libc malloc,
avoiding interposing.

Also do the style pass over the thr_spec.c, esp. simplify the
conditionals nesting by returning early when an error detected.
Remove trivial comments.

Found by:	yuri@rawbw.com
PR:	200138
Sponsored by:	The FreeBSD Foundation
MFC after:	2 weeks
2015-05-15 08:40:17 +00:00
Konstantin Belousov
100ac78be1 On amd64, make proc0 pmap initialization slightly more correct. In
particular, switch to the proc0 pmap to have expected %cr3 and PCID
for the thread0 during initialization, and the up to date pm_active
mask.

pmap_pinit0() should be done after proc0->p_vmspace is assigned so
that the amd64 pmap_activate() find the correct curproc pmap.

Sponsored by:	The FreeBSD Foundation
MFC after:	3 weeks
2015-05-15 08:30:29 +00:00
Konstantin Belousov
f83e0dcb3a Implement the support for PCID in UP kernels.
Requested by:	alc
Tested by:	pho
Sponsored by:	The FreeBSD Foundation
MFC after:	3 weeks
2015-05-15 07:57:47 +00:00
Konstantin Belousov
84cdea97e5 Right now, the process' p_boundary_count counter is decremented by the
suspended thread itself, on the return path from
thread_suspend_check().  A consequence is that return from
thread_single_end(SINGLE_BOUNDARY) may leave p_boundary_count
non-zero, it might be even equal to the threads count.

Now, assume that we have two threads in the process, both calling
execve(2).  Suppose that the first thread won the race to be the
suspension thread, and that afterward its exec failed for any reason.
After the first thread did thread_single_end(SINGLE_BOUNDARY), second
thread becomes the process suspension thread and checks
p_boundary_count.  The non-zero value of the count allows the
suspension loop to finish without actually suspending some threads.
In other words, we enter exec code with some threads not suspended.

Fix this by decrementing p_boundary_count in the
thread_single_end()->thread_unsuspend_one() during marking the thread
as runnable.  This way, a return from thread_single_end() guarantees
that the counter is cleared.  We do not care whether the unsuspended
thread has a chance to run.

Add some asserts to ensure the state of the process when single
boundary suspension is lifted.  Also make thread_unuspend_one()
static.

In collaboration with:	pho
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2015-05-15 07:54:31 +00:00
Andrew Rybchenko
d6e9f7362a sfxge: split sfxge_tx_qdpl_put() into *_locked() and *_unlocked()
It simplifies understanding of the sfxge_tx_packet_add() logic and
avoids passing of 'locked' to called function.

Reviewed by:    gnn
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
Differential Revision: https://reviews.freebsd.org/D2547
2015-05-15 06:50:59 +00:00
Andrew Rybchenko
22bc53cb48 sfxge: do not change CSUM_TSO when IFCAP_TSOx is changed
It is simply not required since the kernel checks corresponding
IFCAP_TSOx capability and CSUM_TSO in hw-assisted offloads.
Note that CSUM_TSO is two bits (CSUM_IP_TSO|CSUM_IP6_TSO) and both bits
are set in IPv4 and IPv6 mbufs.

Reviewed by:    gnn
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
Differential Revision: https://reviews.freebsd.org/D2546
2015-05-15 06:49:43 +00:00
Andrew Rybchenko
3b3390c115 sfxge: LRO may be done only if checksums are OK
Also it is cheaper to check Rx descriptor flags than TCP protocol in IP
header.

Reviewed by:    gnn
Sponsored by:   Solarflare Communications, Inc.
MFC after:      2 days
Differential Revision: https://reviews.freebsd.org/D2542
2015-05-15 06:48:36 +00:00