how hashed MD5/SHA are implemented, abusing Final() for padding and
sw_octx to transport the key from the beginning to the end.
Enlightened about what was going on here by: cperciva
Reviewed by: cperciva
MFC After: 3 days
X-MFC with: r187826
PR: kern/126468
the compression was useless as well. Make sure to not update the data
and return, else we would waste resources when decompressing.
This also avoids the copyback() changing data other consumers like
xform_ipcomp.c would have ignored because of no win and sent out without
noting that compression was used, resulting in invalid packets at the
receiver.
MFC after: 5 days
This is needed to avoid running into out of buffer situations
where we cannot alloc a new buffer because we hit the array size
limit (ZBUF).
Use a combined allocation for the struct and the actual data buffer
to not increase the number of malloc calls. [1]
Defer initialization of zbuf until we actually need it.
Make sure the output buffer will be large enough in all cases.
Details discussed with: kib [1]
Reviewed by: kib [1]
MFC after: 6 days
replacement but only use it for inflate. For deflate use Z_FINISH
as Z_SYNC_FLUSH adds a trailing marker in some cases that inflate(),
despite the comment in zlib, does npt seem to cope well with, resulting
in errors when uncompressing exactly fills the outbut buffer without
a Z_STREAM_END and a successive call returns an error.
MFC after: 6 days
the return context, but from the original context.
Before repeating operation clear DONE flag and error.
Reviewed by: sam
Obtained from: Wheel Sp. z o.o. (http://www.wheel.pl)
Cryptodev uses UIO structure do get data from userspace and pass it to
cryptographic engines. Initially UIO size is equal to size of data passed to
engine, but if UIO is prepared for hash calculation an additional small space
is created to hold result of operation.
While creating space for the result, UIO I/O vector size is correctly
extended, but uio_resid field in UIO structure is not modified.
As bus_dma code uses uio_resid field to determine size of UIO DMA mapping,
resulting mapping hasn't correct size. This leads to a crash if all the
following conditions are met:
1. Hardware cryptographic accelerator writes result of hash operation
using DMA.
2. Size of input data is less or equal than (n * PAGE_SIZE),
3. Size of input data plus size of hash result is grather than
(n * PAGE_SIZE, where n is the same as in point 2.
This patch fixes this problem by adding size of the extenstion to uio_resid
field in UIO structure.
Submitted by: Piotr Ziecik kosmo ! semihalf dot com
Reviewed by: philip
Obtained from: Semihalf
can cope with a result buffer of NULL in the "Final" function, we cannot.
Thus pass in a temporary buffer long enough for either md5 or sha1 results
so that we do not panic.
PR: bin/126468
MFC after: 1 week
This makes it possible to support ftruncate() on non-vnode file types in
the future.
- 'struct fileops' grows a 'fo_truncate' method to handle an ftruncate() on
a given file descriptor.
- ftruncate() moves to kern/sys_generic.c and now just fetches a file
object and invokes fo_truncate().
- The vnode-specific portions of ftruncate() move to vn_truncate() in
vfs_vnops.c which implements fo_truncate() for vnode file types.
- Non-vnode file types return EINVAL in their fo_truncate() method.
Submitted by: rwatson
- Introduce a finit() which is used to initailize the fields of struct file
in such a way that the ops vector is only valid after the data, type,
and flags are valid.
- Protect f_flag and f_count with atomic operations.
- Remove the global list of all files and associated accounting.
- Rewrite the unp garbage collection such that it no longer requires
the global list of all files and instead uses a list of all unp sockets.
- Mark sockets in the accept queue so we don't incorrectly gc them.
Tested by: kris, pho
to kproc_xxx as they actually make whole processes.
Thos makes way for us to add REAL kthread_create() and friends
that actually make theads. it turns out that most of these
calls actually end up being moved back to the thread version
when it's added. but we need to make this cosmetic change first.
I'd LOVE to do this rename in 7.0 so that we can eventually MFC the
new kthread_xxx() calls.
and flags with an sxlock. This leads to a significant and measurable
performance improvement as a result of access to shared locking for
frequent lookup operations, reduced general overhead, and reduced overhead
in the event of contention. All of these are imported for threaded
applications where simultaneous access to a shared file descriptor array
occurs frequently. Kris has reported 2x-4x transaction rate improvements
on 8-core MySQL benchmarks; smaller improvements can be expected for many
workloads as a result of reduced overhead.
- Generally eliminate the distinction between "fast" and regular
acquisisition of the filedesc lock; the plan is that they will now all
be fast. Change all locking instances to either shared or exclusive
locks.
- Correct a bug (pointed out by kib) in fdfree() where previously msleep()
was called without the mutex held; sx_sleep() is now always called with
the sxlock held exclusively.
- Universally hold the struct file lock over changes to struct file,
rather than the filedesc lock or no lock. Always update the f_ops
field last. A further memory barrier is required here in the future
(discussed with jhb).
- Improve locking and reference management in linux_at(), which fails to
properly acquire vnode references before using vnode pointers. Annotate
improper use of vn_fullpath(), which will be replaced at a future date.
In fcntl(), we conservatively acquire an exclusive lock, even though in
some cases a shared lock may be sufficient, which should be revisited.
The dropping of the filedesc lock in fdgrowtable() is no longer required
as the sxlock can be held over the sleep operation; we should consider
removing that (pointed out by attilio).
Tested by: kris
Discussed with: jhb, kris, attilio, jeff
o make all crypto drivers have a device_t; pseudo drivers like the s/w
crypto driver synthesize one
o change the api between the crypto subsystem and drivers to use kobj;
cryptodev_if.m defines this api
o use the fact that all crypto drivers now have a device_t to add support
for specifying which of several potential devices to use when doing
crypto operations
o add new ioctls that allow user apps to select a specific crypto device
to use (previous ioctls maintained for compatibility)
o overhaul crypto subsystem code to eliminate lots of cruft and hide
implementation details from drivers
o bring in numerous fixes from Michale Richardson/hifn; mostly for
795x parts
o add an optional mechanism for mmap'ing the hifn 795x public key h/w
to user space for use by openssl (not enabled by default)
o update crypto test tools to use new ioctl's and add cmd line options
to specify a device to use for tests
These changes will also enable much future work on improving the core
crypto subsystem; including proper load balancing and interposing code
between the core and drivers to dispatch small operations to the s/w
driver as appropriate.
These changes were instigated by the work of Michael Richardson.
Reviewed by: pjd
Approved by: re
Before the change if a hardware crypto driver was loaded after
the software crypto driver, calling crypto_newsession() with
hard=0, will always choose software crypto.
- Add defines with block length for each HMAC algorithm.
- Add AES_BLOCK_LEN define which is an alias for RIJNDAEL128_BLOCK_LEN.
- Add NULL_BLOCK_LEN define.
Checking if the queues are empty is not enough for the crypto_proc thread
(it is enough for the crypto_ret_thread), because drivers can be marked
as blocked. In a situation where we have operations related to different
crypto drivers in the queue, it is possible that one driver is marked as
blocked. In this case, the queue will not be empty and we won't wakeup
the crypto_proc thread to execute operations for the others drivers.
Simply setting a global variable to 1 when we goes to sleep and setting
it back to 0 when we wake up is sufficient. The variable is protected
with the queue lock.
Before the change if the thread was working on symmetric operation, we
would send unnecessary wakeup after adding asymmetric operation (when
asym queue was empty) and vice versa.
twice if we call crypto_kinvoke() from crypto_proc thread.
This change also removes unprotected access to cc_kqblocked field
(CRYPTO_Q_LOCK() should be used for protection).
where crypto_invoke() returns ERESTART and before we set cc_qblocked to 1,
crypto_unblock() is called and sets it to 0. This way we mark device as
blocked forever.
Fix it by not setting cc_qblocked in the fast path and by protecting
crypto_invoke() in the crypto_proc thread with CRYPTO_Q_LOCK().
This won't slow things down, because there is no contention - we have
only one crypto thread. Actually it can be slightly faster, because we
save two atomic ops per crypto request.
The fast code path remains lock-less.
or SHA512, the blocksize is 128 bytes, not 64 bytes as anywhere else.
The bug also exists in NetBSD, OpenBSD and various other independed
implementations I look at.
- We cannot decide which hash function to use for HMAC based on the key
length, because any HMAC function can use any key length.
To fix it split CRYPTO_SHA2_HMAC into three algorithm:
CRYPTO_SHA2_256_HMAC, CRYPTO_SHA2_384_HMAC and CRYPTO_SHA2_512_HMAC.
Those names are consistent with OpenBSD's naming.
- Remove authsize field from auth_hash structure.
- Allow consumer to define size of hash he wants to receive.
This allows to use HMAC not only for IPsec, where 96 bits MAC is requested.
The size of requested MAC is defined at newsession time in the cri_mlen
field - when 0, entire MAC will be returned.
- Add swcr_authprepare() function which prepares authentication key.
- Allow to provide key for every authentication operation, not only at
newsession time by honoring CRD_F_KEY_EXPLICIT flag.
- Make giving key at newsession time optional - don't try to operate on it
if its NULL.
- Extend COPYBACK()/COPYDATA() macros to handle CRYPTO_BUF_CONTIG buffer
type as well.
- Accept CRYPTO_BUF_IOV buffer type in swcr_authcompute() as we have
cuio_apply() now.
- 16 bits for key length (SW_klen) is more than enough.
Reviewed by: sam
crypto_invoke(). This allows to serve multiple crypto requests in
parallel and not bached requests are served lock-less.
Drivers should not depend on the queue lock beeing held around
crypto_invoke() and if they do, that's an error in the driver - it
should do its own synchronization.
- Don't forget to wakeup the crypto thread when new requests is
queued and only if both symmetric and asymmetric queues are empty.
- Symmetric requests use sessions and there is no way driver can
disappear when there is an active session, so we don't need to check
this, but assert this. This is also safe to not use the driver lock
in this case.
- Assymetric requests don't use sessions, so don't check the driver
in crypto_kinvoke().
- Protect assymetric operation with the driver lock, because if there
is no symmetric session, driver can disappear.
- Don't send assymetric request to the driver if it is marked as
blocked.
- Add an XXX comment, because I don't think migration to another driver
is safe when there are pending requests using freed session.
- Remove 'hint' argument from crypto_kinvoke(), as it serves no purpose.
- Don't hold the driver lock around kprocess method call, instead use
cc_koperations to track number of in-progress requests.
- Cleanup register/unregister code a bit.
- Other small simplifications and cleanups.
Reviewed by: sam
- Implement CUIO_SKIP() macro which is only responsible for skipping the given
number of bytes from iovec list. This allows to avoid duplicating the same
code in three functions.
Reviewed by: sam
