Commit Graph

65 Commits

Author SHA1 Message Date
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Warner Losh
1ff2328528 Tweak the compatibility macros a little so that the device printing is
moved into them.
2004-08-15 23:39:18 +00:00
Warner Losh
d1458cfdf4 MFp4: First batch of dev/usb/usbdevs.h -> usbdevs.h changes. 2004-06-27 12:41:44 +00:00
Lukas Ertl
5980decb5b MFNetBSD 1.60, author: augustss
Several changes:
    * Implement read for ulpt.
    * If the device is not opened for reading, occasionally drain any
      data the printer might have (but don't hammer the printer with reads).
    * Lower the buffer size to one page.
   The driver seems to work with more printers now.

Obtained from: NetBSD
2004-06-23 11:16:12 +00:00
Poul-Henning Kamp
89c9c53da0 Do the dreaded s/dev_t/struct cdev */
Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
Poul-Henning Kamp
dc08ffec87 Device megapatch 4/6:
Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.

Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
2004-02-21 21:10:55 +00:00
Poul-Henning Kamp
c9c7976f7f Device megapatch 1/6:
Free approx 86 major numbers with a mostly automatically generated patch.

A number of strategic drivers have been left behind by caution, and a few
because they still (ab)use their major number.
2004-02-21 19:42:58 +00:00
Poul-Henning Kamp
ed692400eb I don't know from where the notion that device driver should or
even could call VOP_REVOKE() on vnodes associated with its dev_t's
has originated, but it stops right here.

If there are things people belive destroy_dev() needs to learn how to
do, please tell me about it, preferably with a reproducible test case.

Include <sys/uio.h> in bluetooth code rather than rely on <sys/vnode.h>
to do so.

The fact that some of the USB code needs to include <sys/vnode.h>
still disturbs me greatly, but I do not have time to chase that.
2003-09-28 20:48:13 +00:00
Josef Karthauser
219b479f9f Fix the cdevsw compatibility for -stable. 2003-08-25 22:01:06 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Ian Dowse
688514ced0 If the device goes away during ulpt_reset(), make sure not to call
ulpt_status() afterwards. This fixes a crash that can occur if a
USB printer is power-cycled when printing is just starting. The
problem is similar to that fixed in revision 1.33, but it is much
less likely to occur.

MFC after:	1 week
2003-06-15 11:55:50 +00:00
Poul-Henning Kamp
7ac40f5f59 Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by:    re(scottl)
2003-03-03 12:15:54 +00:00
Dag-Erling Smørgrav
521f364b80 More low-hanging fruit: kill caddr_t in calls to wakeup(9) / [mt]sleep(9). 2003-03-02 16:54:40 +00:00
Jens Schweikhardt
9d5abbddbf Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup,
especially in troff files.
2003-01-01 18:49:04 +00:00
Dag-Erling Smørgrav
f0d91fb7ea Ignore IEEE1284 descriptors when looking for bidirectional mode. We don't
really know how to talk IEEE1284, so attaching to that interface makes the
printer unusable.

Approved by:	joe
2002-12-16 14:22:59 +00:00
Dag-Erling Smørgrav
6ed6884063 MFNetBSD: 1.52-1.55
Mostly OpenBSD-related changes.  Remove newline from panic string.  Remove
an unreachable break statement.
2002-12-16 14:20:26 +00:00
Ian Dowse
8a7562d079 Check for errors and zero-length transfers in the ulpt_input() input
pipe callback function, and just return if these cases are detected.
Without these checks, the ulpt driver may cause an infinite loop
of failing USB transfers that can hang the whole machine. This makes
printing work for me on a HP DJ950C printer.
2002-10-30 01:18:58 +00:00
Josef Karthauser
1e03ff6cf0 MFNetBSD: 1.51
Move a quirk tests so the message printed about directionality is
right.
2002-08-16 12:16:07 +00:00
Josef Karthauser
a6103a945a MFNetBSD: (1.50) Get rid of trailing white space. 2002-08-16 12:13:26 +00:00
Josef Karthauser
3b7efc56d0 Use the hw.usb sysctl tree instead of debug.usb.
Requested by:	imp
2002-08-08 12:05:51 +00:00
Josef Karthauser
528d1a7fbc Replace the FOO_DEBUG definitions with USB_DEBUG, and switch the
debugging levels to off by default.  Now that debug levels can be
tweaked by sysctl we don't need to go through hoops to get the
different usb parts to produce debug data.
2002-07-31 14:34:36 +00:00
Josef Karthauser
0e6b196686 Get bored with hard coded debug level variables and introduce a debug.usb
sysctl tree for tweaking them real-time.

Reviewed by:	iedowse
2002-07-31 13:33:55 +00:00
Josef Karthauser
567f4af63d MFNetBSD: ugen.c (1.57), ulpt.c (1.48), usb.c (1.67), usbdi.c (1.96),
usbdi.h (1.60)
	  (and local changes compatibility changes to ufm.c and urio.c)

    date: 2002/02/11 15:11:49;  author: augustss;
    Give usbd_do_request_flags() an extra argument for the timeout.
2002-05-06 18:23:36 +00:00
Josef Karthauser
be036866cf Be more specific about when block major numbers disappeared from
the cdev switch.
2002-03-11 16:22:15 +00:00
Alfred Perlstein
6f65a2bd46 in ulpt_reset() req.bmRequestType was unitialized, fix it. 2002-02-26 01:19:56 +00:00
Josef Karthauser
c67fd26e98 Re-add bmaj to the cdevsw's, but don't compile it in on -current.
This makes the code more portable between -current, -stable and the
other BSDs.
2002-02-15 22:54:10 +00:00
Josef Karthauser
d7b35d44a1 Merge from NetBSD: revs 1.43 + 1.45
From the NetBSD logs:

    revision 1.45
    date: 2001/11/29 11:07:12;  author: augustss;  state: Exp;  lines: +12 -2
    Plug a memory leak in an error case.
    ----------------------------
    revision 1.43
    date: 2001/10/19 15:30:25;  author: nathanw;  state: Exp;  lines: +5 -3
    Match printers that report their interface as IEEE 1284 in addition to
    bidirectional.
2002-02-11 01:04:46 +00:00
Josef Karthauser
5440b9801c Sync with NetBSD:
date: 2000/02/29 21:37:01;  author: augustss;  state: Exp;
	Distinguish between device and interface classes.
	(I finally found a document that said that they were different.)
2002-01-02 18:28:45 +00:00
Josef Karthauser
44ae5917e2 NetBSD have introduced usb_proc_ptr for us (they'll be needing it soon too)
to hide the distinction between struct proc and struct thread.
2002-01-02 16:33:53 +00:00
Poul-Henning Kamp
602150cc70 Set ulptusein = 0 so that the machine doesn't hang solid after a
printjob.

There is probably a better fix, but this at least makes USB printing
working again.
2001-10-12 11:05:58 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
Nick Hibma
55e6acd71b Pull in the current version of NetBSD's ulpt.c, supporting bidirectional
communication with printers.
2001-07-05 10:15:37 +00:00
Poul-Henning Kamp
f83880518b Send the remains (such as I have located) of "block major numbers" to
the bit-bucket.
2001-03-26 12:41:29 +00:00
Nick Hibma
1d8068f94a Fix for powering off a HP DJ950C during printing. As stated by Ian:
When the printer is turned off the pipe write will cause and error,
which causes lpd to close the device and reopen it to clear the error.
After a short while the device will disappear from the bus but lpd will
have opened the ulpt0 port by then. ulpt_status will check for status
without checking the sc->dying flag and panic the kernel when the device
finally disappears from the bus.

Submitted by:	Ian Dowse <iedowse@maths.tcd.ie>
2000-11-07 10:50:34 +00:00
Nick Hibma
8e6f860ac9 Remove unneccessary includes. (phk) 2000-10-10 12:41:46 +00:00
Nick Hibma
4f04f78215 Remove __P prototypes to reduce diffs between the NetBSD and FreeBSD
versions.
2000-07-17 18:41:20 +00:00
Nick Hibma
eafdcd5886 Sync with NetBSD:
Textual changes.
2000-05-14 19:44:24 +00:00
Nick Hibma
128aa3af3c Change Lennart's e-mail address. 2000-05-14 16:43:10 +00:00
Poul-Henning Kamp
e9340d96fa Remove 42 unneeded #include <sys/ioccom.h>.
ioccom.h defines only implementation detail, and should therefore
only be included from the #include which defines the ioctl tags,
in other words: never include it from *.c
2000-05-03 07:31:38 +00:00
Nick Hibma
cdb51d12a6 OpenBSD has a broken debugger that does not grok static. Use a
#define Static  static

that the OpenBSD folks can define it to be empty if they like.
2000-04-03 20:58:30 +00:00
Nick Hibma
a9909bdaab Synchronisation with NetBSD 1999/11/27
- more req[uest]->xfer changes.
- get the corresponding NetBSD Id's right

ohci.c
   - move untimeout above print statement
   - remove usb_delay that panics the system (tsleep in intr context) when
   ohcidebug > 5.

ugen.c
   - create the devices for endpoints with make_dev.

uhub.c
   - change from using usbdebug to uhubdebug
   - add more debugging statements
1999-11-28 21:01:06 +00:00
Nick Hibma
88ea580e34 Revoke the vnodes on detach. This avoids the crashes people have seen
when moused was still running when the mouse was detached.

Convert uhid to use make_dev while I am there. Ugen still needs to be
converted.
1999-11-21 17:25:30 +00:00
Nick Hibma
3241be7550 Synchronisation with NetBSD as of 1999/11/16:
Cleaning up the code:
- Declare many functions static
- Change variable names to make them more self explanatory
- Change usbd_request_handle -> usbd_xfer_handle
- Syntactical changes
- Remove some unused code
- Other KNF changes

Interrupt context handling
- Change delay to usbd_delay_ms were possible (takes polling mode into
  account)
- Change detection mechanism for interrupt context

Add support for pre-allocation DMA-able memory by device driver

Add preliminary support for isochronous to the UHCI driver (not for OHCI
yet).

usb.c, uhci.c, ohci.c
- Initial attempt at detachable USB host controllers
- Handle the use_polling flag with a lttle more care and only set it if
we are cold booting.

usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c
- Make sure an aborted pipe is marked as not running.
- Start queued request in the right order.
- Insert some more DIAGNOSTIC sanity checks.
- Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN.

usb.c, usb_subr.c
- Add an event mechanism so that a userland process can watch devices
  come and go.

ohci.c
- Handle the case when a USB transfer is so long that it crosses two
  page (4K) boundaries.  OHCI cannot do that with a single TD so we make
  a chain.

ulpt.c
- Use a bigger buffer when transferring data.
- Pre-allocate the DMA buffer.  This makes the driver slightly more
  efficient.
- Comment out the GET_DEVICE_ID code, because for some unknown reason it
  causes printing to fail sometimes.

usb.h
- Add a macro to extract the isoc type.
- Add a macro to check whether the routine has been entered after splusb
  and if not, complain.

usbdi.c
- Fix a glitch in dequeueing and aborting requests on interrupt pipes.
- Add a flag in the request to determine if the data copying is done by
  the driver or the usbdi layer.
1999-11-17 22:33:51 +00:00
Poul-Henning Kamp
44d1184e81 Rename remove_dev() to destroy_dev().
Nagged about by:        msmith
1999-11-08 07:44:01 +00:00
Peter Wemm
bda20b64e4 ulpt.c and ums.c already uses make_dev(), so there's no need to use the
(presently broken) DEV_DRIVER_MODULE().  Use DRIVER_MODULE() directly.
1999-11-08 07:10:48 +00:00
Nick Hibma
8c895d718b Major synchronisation with the NetBSD USB stack:
- Some cleanup and improvements in the uhci and ohci drivers
- Support for plugging and unplugging devices improved
- Now available is bulk transport over OHCI controllers
- Resume and suspend have been temporarily been disabled again.  Proper
  support for it is available in the uhci.c and ohci.c files but I have
  not yet spent the brain cycles to use it.
- OpenBSD now uses the USB stack as well
- Add FreeBSD tags
1999-10-07 19:26:38 +00:00
Poul-Henning Kamp
d6a0e38a1b Remove five now unused fields from struct cdevsw. They should never
have been there in the first place.  A GENERIC kernel shrinks almost 1k.

Add a slightly different safetybelt under nostop for tty drivers.

Add some missing FreeBSD tags
1999-09-25 18:24:47 +00:00
Nick Hibma
d88879933b We use device_set_desc_copy, so we do not need to free the copied text
manually.
1999-08-28 11:35:36 +00:00
Poul-Henning Kamp
03016f421b Remove cmaj and bmaj args from DEV_DRIVER_MODULE. 1999-07-04 14:58:56 +00:00
Poul-Henning Kamp
4e2f199e0c This commit should be a extensive NO-OP:
Reformat and initialize correctly all "struct cdevsw".

        Initialize the d_maj and d_bmaj fields.

        The d_reset field was not removed, although it is never used.

I used a program to do most of this, so all the files now use the
same consistent format.  Please keep it that way.

Vinum and i4b not modified, patches emailed to respective authors.
1999-05-30 16:53:49 +00:00