PowerPC CPUs running a 32-bit kernel. This bug could cause in-use VSIDs
to be allocated again to another process, causing memory space overlaps
and corruption.
Reported by: linimon
discrepencies from the igb version which was the target.
Change the message when neither MSI or MSIX are enabled
and a fallback to Legacy interrupts happen, the existing
message was confusing.
directories for purposes of validating name cache entries. This
closes races where two updates to a file or directory within the same
second could result in stale entries in the name cache. While here,
remove the 'n_expiry' field as it is no longer used.
Reviewed by: rmacklem
MFC after: 1 week
"uncore" devices (such as the memory controller) in that socket. Stop
hardcoding support for two busses, but instead start probing buses at
domain 0, bus 255 and walk down until a bus probe fails. Also, do not probe
a bus if it has already been enumerated elsewhere (e.g. if ACPI ever
enumerates these buses in the future).
Fix interrupt routing so that the irq returned is correct for XLR and
XLS. This also updates the MSI hack we had earlier - we still don't
really support MSI, but we support some drivers that use MSI, by providing
support for allocating one MSI per pci link - this MSI is directly
mapped to the link IRQ.
lock on the pmc-sx lock. This prevents a deadlock with
pmc_log_process_mappings, which has an exclusive lock on pmc-sx and tries
to get a read lock on a vm_map. Downgrading the vm_map_lock in munmap
allows pmc_log_process_mappings to continue, preventing the deadlock.
Without this change I could cause a deadlock on a multicore 8.1-RELEASE
system by having one thread constantly mmap'ing and then munmap'ing a
PROT_EXEC mapping in a loop while I repeatedly invoked and stopped pmcstat
in system-wide sampling mode.
Reviewed by: fabient
Approved by: emaste (mentor)
MFC after: 2 weeks
using ipproto_{un,}register() and the newly created ip6proto_{un,}register()
so that it can again receive IPPROTO_CARP packets allowing its state machine
to work.
Reviewed by: bz
Approved by: ken (mentor)
- add identify method to create driver's own device_t
- successfully probe only driver's own device_t instead of any device_t
- (ab)use device order to hopefully be probed/attached after acpi_wmi
PR: kern/147858
Tested by: Maciej Suszko <maciej@suszko.eu>
MFC after: 1 week
- Add special check for case when time expires before being programmed.
This fixes interrupt loss and respectively timer death on attempt to
program very short interval. Increase minimal supported period to more
realistic value.
- Add support for hint.hpet.X.allowed_irqs tunable, allowing manually
specify which interrupts driver allowed to use. Unluckily, many BIOSes
program wrong allowed interrupts mask, so driver tries to stay on safe
side by not using unshareable ISA IRQs. This option gives control over
this limitation, allowing more per-CPU timers to be provided, when FSB
interrupts are not supported. Value of this tunable is bitmask.
- Do not use regular interrupts on virtual machines. QEMU and VirtualBox
do not support them properly, that may cause problems. Stay safe by default.
Same time both QEMU and VirtualBox work fine in legacy_route mode.
VirtualBox also works fine if manually specify allowed ISA IRQs with above.
upper layer. Until now, unionfs prevents to use that kind of
file system as upper layer. This time, I changed to allow
that kind of file system as upper layer. By this change, you
can use whiteout not supporting file system (e.g., especially
for tmpfs) as upper layer. It's very useful for combination of
tmpfs as upper layer and read only file system as lower layer.
By difinition, without whiteout support from the file system
backing the upper layer, there is no way that delete and rename
operations on lower layer objects can be done. EOPNOTSUPP is
returned for this kind of operations as generated by VOP_WHITEOUT()
along with any others which would make modifica tions to the
lower layer, such as chmod(1).
This change is suggested by ed.
Submitted by: ed
client to return an error when rabp is not set, so it
behaves the same way as the regular NFS client for this
case. It does not affect NFSv4, since nfs_getcacheblk()
only fails for "intr" mounts and NFSv4 can't use the
"intr" mount option.
MFC after: 2 weeks
Also change int -> u_int for order parameter in device_add_child_ordered.
There should not be any ABI change as struct device is private to subr_bus.c
and the API change should be compatible.
To do: change int -> u_int for order parameter of bus_add_child method
and its implementations. The change should also be API compatible, but
is a bit more churn.
Suggested by: imp, jhb
MFC after: 1 week
Both deadline and current_time are time_seconds (+ utc_offset())
casted to unsigned long long. No need to cast to or print as pointers.
MFC after: 4 days
vm_page_startup uses MSGBUF_SIZE value for adding msgbuf pages to minidump.
If opt_msgbuf.h is not included and MSGBUF_SIZE is overriden in kernel
config, then not all msgbuf pages will be dumped. And most importantly,
struct msgbuf itself will not be included. Thus the dump would look
corrupted/incomplete to tools like kgdb, dmesg, etc that try to access
struct msgbuf as one of the first things they do when working on a crash
dump.
MFC after: 5 days
A make buildkernel -j4 uses ~360% CPU.
- Bracket the AP spinup printf with a mutex to avoid garbled output.
- Enable SMP by default on powerpc64.
Reviewed by: nwhitehorn
Add the BIO_ORDERED flag for struct bio and update bio clients to use it.
The barrier semantics of bioq_insert_tail() were broken in two ways:
o In bioq_disksort(), an added bio could be inserted at the head of
the queue, even when a barrier was present, if the sort key for
the new entry was less than that of the last queued barrier bio.
o The last_offset used to generate the sort key for newly queued bios
did not stay at the position of the barrier until either the
barrier was de-queued, or a new barrier (which updates last_offset)
was queued. When a barrier is in effect, we know that the disk
will pass through the barrier position just before the
"blocked bios" are released, so using the barrier's offset for
last_offset is the optimal choice.
sys/geom/sched/subr_disk.c:
sys/kern/subr_disk.c:
o Update last_offset in bioq_insert_tail().
o Only update last_offset in bioq_remove() if the removed bio is
at the head of the queue (typically due to a call via
bioq_takefirst()) and no barrier is active.
o In bioq_disksort(), if we have a barrier (insert_point is non-NULL),
set prev to the barrier and cur to it's next element. Now that
last_offset is kept at the barrier position, this change isn't
strictly necessary, but since we have to take a decision branch
anyway, it does avoid one, no-op, loop iteration in the while
loop that immediately follows.
o In bioq_disksort(), bypass the normal sort for bios with the
BIO_ORDERED attribute and instead insert them into the queue
with bioq_insert_tail(). bioq_insert_tail() not only gives
the desired command order during insertion, but also provides
barrier semantics so that commands disksorted in the future
cannot pass the just enqueued transaction.
sys/sys/bio.h:
Add BIO_ORDERED as bit 4 of the bio_flags field in struct bio.
sys/cam/ata/ata_da.c:
sys/cam/scsi/scsi_da.c
Use an ordered command for SCSI/ATA-NCQ commands issued in
response to bios with the BIO_ORDERED flag set.
sys/cam/scsi/scsi_da.c
Use an ordered tag when issuing a synchronize cache command.
Wrap some lines to 80 columns.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c
sys/geom/geom_io.c
Mark bios with the BIO_FLUSH command as BIO_ORDERED.
Sponsored by: Spectra Logic Corporation
MFC after: 1 month
to pad with 0xFF when it encounter short frames. According to RFC
1042 the pad bytes should be 0x00.
Because manual padding consumes extra CPU cycles, introduce a new
tunable which controls the padding behavior. Turning this tunable
on will have driver pad manually but it's disabled by default. Users
can enable software padding by setting the following tunable to
non-zero value.
dev.sis.%d.manual_pad="1"
PR: kern/35422 (patch not used)
prevented driver from working on big-endian machines. Also rewrite
station address programming to make it work on strict-alignment
architectures. With this change, sis(4) now works on sparc64 and
performance number looks good even though sis(4) have to apply
fixup code to align received frames on 2 bytes boundary on sparc64.
