These primitives give the caller the read value if the exchange attempt
failed which saves an explicit reload for cmpset loops.
The man page was partially submitted by kib.
Reviewed by: kib (previous version), jhb (previous version)
For the case that someone set WITHOUT_GSSAPI=, now WITHOUT_KERBEROS_SUPPORT
will be properly set.
This will likely fix the issue for the default case noted in the PR I filed
back in 2011. I am trying to fix the less obvious case documented in the PR
still.
MFC after: 2 weeks
PR: 159745
- Update struct link_settings and associated shared code.
- Add tunables to control FEC and autonegotiation. All ports inherit
these values as their initial settings.
hw.cxgbe.fec
hw.cxgbe.autoneg
- Add per-port sysctls to control FEC and autonegotiation. These can be
modified at any time.
dev.<port>.<n>.fec
dev.<port>.<n>.autoneg
MFC after: 3 days
Sponsored by: Chelsio Communications
then ensure the destination directories exist.
Especially if you define OLDTIMEZONES because the mtree pass
doesn't do it for you.
MFC after: 1 week
Sponsored by: Panzura
- Drop uses of 'will'.
- Replace 'to use' with active voice.
- Tidy language around interrupt types and clarify that INTx doesn't
work on VFs.
- Drop leading articles from sysctl/tunable descriptions.
- Tweak the wording of several sysctl/tunable descriptions.
Submitted by: wblock (1, 2, 4)
Sponsored by: Chelsio Communications
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D8812
FC-Tape provides additional link level error recovery, and is
highly recommended for tape devices. It will only be turned on for
a given target if the target supports it.
Without this setting, we default to whatever FC-Tape setting is in
NVRAM on the card.
This can be overridden by setting the following loader tunable, for
example for isp0:
hint.isp.0.nofctape=1
sys/conf/options:
Add a new kernel config option, ISP_FCTAPE_OFF, that
defaults the FC-Tape configuration to off.
sys/dev/isp/isp_pci.c:
If ISP_FCTAPE_OFF is defined, turn off FC-Tape. Otherwise,
turn it on if the card supports it.
share/man/man4/isp.4:
Add a description of FC-Tape to the isp(4) man page.
Add descriptions of the fctape and nofctape options, as well as the
ISP_FCTAPE_OFF kernel configuration option.
Add the ispfw module and kernel drivers to the suggested
configurations at the top of the man page so that users are less
likely to leave it out. The driver works well with the included
firmware, but may not work at all with whatever firmware the user
has flashed on their card.
MFC after: 3 days
Sponsored by: Spectra Logic
When WITH_REPRODUCIBLE_BUILD=yes is set in src.conf(5), eliminate the
time, user, and host from the loader's version information. This allows
builds to produce bit-for-bit identical output.
Reviewed by: bapt
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8842
I'm currently working on writing a metrics exporter for the Prometheus
monitoring system to provide access to sysctl metrics. Prometheus and
sysctl have some structural differences:
- sysctl is a tree of string component names.
- Prometheus uses a flat namespace for its metrics, but allows you to
attach labels with values to them, so that you can do aggregation.
An initial version of my exporter simply translated
hw.acpi.thermal.tz1.temperature
to
sysctl_hw_acpi_thermal_tz1_temperature_celcius
while we should ideally have
sysctl_hw_acpi_thermal_temperature_celcius{thermal_zone="tz1"}
allowing you to graph all thermal zones on a system in one go.
The change presented in this commit adds support for accomplishing this,
by providing the ability to attach labels to nodes. In the example I
gave above, the label "thermal_zone" would be attached to "tz1". As this
is a feature that will only be used very rarely, I decided to not change
the KPI too aggressively.
Discussed on: hackers@
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D8775
Changes include modifications in kernel crash dump routines, dumpon(8) and
savecore(8). A new tool called decryptcore(8) was added.
A new DIOCSKERNELDUMP I/O control was added to send a kernel crash dump
configuration in the diocskerneldump_arg structure to the kernel.
The old DIOCSKERNELDUMP I/O control was renamed to DIOCSKERNELDUMP_FREEBSD11 for
backward ABI compatibility.
dumpon(8) generates an one-time random symmetric key and encrypts it using
an RSA public key in capability mode. Currently only AES-256-CBC is supported
but EKCD was designed to implement support for other algorithms in the future.
The public key is chosen using the -k flag. The dumpon rc(8) script can do this
automatically during startup using the dumppubkey rc.conf(5) variable. Once the
keys are calculated dumpon sends them to the kernel via DIOCSKERNELDUMP I/O
control.
When the kernel receives the DIOCSKERNELDUMP I/O control it generates a random
IV and sets up the key schedule for the specified algorithm. Each time the
kernel tries to write a crash dump to the dump device, the IV is replaced by
a SHA-256 hash of the previous value. This is intended to make a possible
differential cryptanalysis harder since it is possible to write multiple crash
dumps without reboot by repeating the following commands:
# sysctl debug.kdb.enter=1
db> call doadump(0)
db> continue
# savecore
A kernel dump key consists of an algorithm identifier, an IV and an encrypted
symmetric key. The kernel dump key size is included in a kernel dump header.
The size is an unsigned 32-bit integer and it is aligned to a block size.
The header structure has 512 bytes to match the block size so it was required to
make a panic string 4 bytes shorter to add a new field to the header structure.
If the kernel dump key size in the header is nonzero it is assumed that the
kernel dump key is placed after the first header on the dump device and the core
dump is encrypted.
Separate functions were implemented to write the kernel dump header and the
kernel dump key as they need to be unencrypted. The dump_write function encrypts
data if the kernel was compiled with the EKCD option. Encrypted kernel textdumps
are not supported due to the way they are constructed which makes it impossible
to use the CBC mode for encryption. It should be also noted that textdumps don't
contain sensitive data by design as a user decides what information should be
dumped.
savecore(8) writes the kernel dump key to a key.# file if its size in the header
is nonzero. # is the number of the current core dump.
decryptcore(8) decrypts the core dump using a private RSA key and the kernel
dump key. This is performed by a child process in capability mode.
If the decryption was not successful the parent process removes a partially
decrypted core dump.
Description on how to encrypt crash dumps was added to the decryptcore(8),
dumpon(8), rc.conf(5) and savecore(8) manual pages.
EKCD was tested on amd64 using bhyve and i386, mipsel and sparc64 using QEMU.
The feature still has to be tested on arm and arm64 as it wasn't possible to run
FreeBSD due to the problems with QEMU emulation and lack of hardware.
Designed by: def, pjd
Reviewed by: cem, oshogbo, pjd
Partial review: delphij, emaste, jhb, kib
Approved by: pjd (mentor)
Differential Revision: https://reviews.freebsd.org/D4712
This is reworking the change in r296585 but to still properly install
the files. This limits the change to only the DIRDEPS_BUILD logic
for what it considers the name of the staging set, which is what the
cookie name is based off of.
Sponsored by: Dell EMC Isilon
MFC after: 1 week
Instead of failing with ENAMETOOLONG, which is swallowed by
pthread_set_name_np() anyway, truncate the given name to MAXCOMLEN+1
bytes. This is more likely what the user wants, and saves the
caller from truncating it before the call (which was the only
recourse).
Polish pthread_set_name_np(3) and add a .Xr to thr_set_name(2)
so the user might find the documentation for this behavior.
Reviewed by: jilles
MFC after: 3 days
Sponsored by: Dell EMC
- It should say 'read' in the I2CREAD section.
- last in the struct indicates the last command in a sequence, not the
reverse.
Reviewed by: imp
MFC after: 3 days
to create a repo during 'make packages'
This would have been useful for a situation I found myself in where
pkg(8) had been upgraded to a version that wanted the FBSD_1.5 ABI
version but libc.so.7 had not been upgraded, and only provided
FBSD_1.4. I found I needed to update libc in order to run pkg, and I
also needed to use pkg to update libc... Which is why pkg-static
exists, but there's currently no way to tell the build system to use
pkg-static instead of pkg.
This creates a variable PKG_CMD, default value 'pkg', that can be
overridden from the command line.
Reviewed by: gjb
Approved by: gjb
Differential Revision: https://reviews.freebsd.org/D8120
If set it installs LLD as /usr/bin/ld. LLD (as of version 3.9) is not
capable of linking the world and kernel, but can self-host and link many
substantial applications. GNU ld continues to be used for the world and
kernel build, regardless of how this knob is set.
It is on by default for arm64, and off for all other CPU architectures.
Sponsored by: The FreeBSD Foundation
~/nsmb.conf, as erroneously introduced by r214387, is never used. Fix the man
page to specify that ~/.nsmbrc is used instead.
PR: 210652
Submitted by: ganael.laplanche@corp.ovh.com
Approved by: gjb (doceng@)
We shouldn't install them on the architectures not supported by Hyper-V.
And, hv_ata_pci_disengage.4.gz should be removed from all architectures:
1) It should have only applied to Hyper-V;
2) For Hyper-V platforms (amd64 and i386), the related driver was removed by
r306426 | sephe | 2016-09-29 09:41:52 +0800 (Thu, 29 Sep 2016),
because now we have a better mechanism to disble the ata driver for hard
disks when the VM runs on Hyper-V.
Reviewed by: sephe, andrew, jhb
Approved by: sephe (mentor)
MFC after: 3 days
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8572
