illumos/illumos-gate@84927f52bd
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Allan Jude <allanjude@freebsd.org>
illumos/illumos-gate@047c81d31d
Reviewed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Saso Kiselkov <saso.kiselkov@nexenta.com>
This is irrelevant to FreeBSD, just a diff reduction.
illumos/illumos-gate@7928f4baf4
Reviewed by: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@7341a7de4f
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Brad Lewis <brad.lewis@delphix.com>
Due to an attempt to check two conditions at once in a macro not designed
as such, the assertion would always evaluate to true.
#define VERIFY3_IMPL(LEFT, OP, RIGHT, TYPE) do { \
const TYPE __left = (TYPE)(LEFT); \
const TYPE __right = (TYPE)(RIGHT); \
if (!(__left OP __right)) \
assfail3(#LEFT " " #OP " " #RIGHT, \
(uintmax_t)__left, #OP, (uintmax_t)__right, \
__FILE__, __LINE__); \
_NOTE(CONSTCOND) } while (0)
#define ASSERT3U(x, y, z) VERIFY3_IMPL(x, y, z, uint64_t)
Mean that we compared:
left = (type == ZIO_TYPE_FREE || psize)
OP = "<="
right = (SPA_MAXBLOCKSIZE)
If the type was not FREE, 0 is less than SPA_MAXBLOCKSIZE (16MB)
If the type is ZIO_TYPE_FREE, 1 is less than SPA_MAXBLOCKSIZE
The constraint on psize (physical size of the FREE operation) is never
checked against SPA_MAXBLOCKSIZE
Reported by: Ka Ho Ng <khng300@gmail.com>
Reviewed by: kevans
MFC after: 2 weeks
Sponsored by: Klara Systems
This allows to reduce memory waste by letting UMA to put multiple small
buffers into one memory page slab. The page sharing means that UMA
may not be able to free memory page when some of buffers are freed, but
alternatively memory used by that buffer would just be wasted from the
beginning.
This change follows alike change in ZoL, but unlike Linux (according to
my understanding of it from comments) FreeBSD never shares slabs bigger
then one memory page, so this should be even less invasive then there.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
This allows the user to enable, disable, and adjust the I/O deadman at
runtime. This can be especially useful when a pool is backed by remote
storage (such as iscsi, ggated, etc).
PR: 221906
Submitted by: Fabian Keil <fk@fabiankeil.de>
Obtained from: ElectroBSD
MFC after: 1 week
Sponsored by: Klara Systems
Event: Waterloo Hackathon 2019
I believe previous ifdef caused NULL dereference in later zfs_log_create()
on attempt to create file inside directory belonging to ephemeral group
created on illumos, trying to write to log information about GID domain
of the newly created file, inheriting the ephemeral GID.
This patch reuses original illumos SGID code with exception that due to
lack of ID mapping code on FreeBSD ephemeral GID will turn into GID_NOBODY
by another ifdef inside zfs_fuid_map_id().
MFC after: 1 month
Sponsored by: iXsystems, Inc.
I overlooked the fact that that VOP_FSYNC() call is not a FreeBSD VFS
call, but a macro that provides an illumos-compatible wrapper for the
FreeBSD operation.
PR: 236475
Reported by: lwhsu
Pointyhat to: avg
`arc_reclaim_thread()` calls `arc_adjust()` after calling
`arc_kmem_reap_now()`; `arc_adjust()` signals `arc_get_data_buf()` to
indicate that we may no longer be `arc_is_overflowing()`.
The problem is, `arc_kmem_reap_now()` can take several seconds to
complete, has no impact on `arc_is_overflowing()`, but due to how the
code is structured, can impact how long the ARC will remain in the
`arc_is_overflowing()` state.
The fix is to use seperate threads to:
1. keep `arc_size` under `arc_c`, by calling `arc_adjust()`, which
improves `arc_is_overflowing()`
2. keep enough free memory in the system, by calling
`arc_kmem_reap_now()` plus `arc_shrink()`, which improves
`arc_available_memory()`.
illumos/illumos-gate@de753e34f9
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan McDonald <danmcd@joyent.com>
Reviewed by: Tim Kordas <tim.kordas@joyent.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Brad Lewis <brad.lewis@delphix.com>
I tried to save some CPU time on hopeless aggregation attempts, but it seems
the condition I added is overly strict, blocking also aggregation of optional
I/Os in cases which previously were possible. Revert just to be safe.
MFC after: 1 month
The LBA weighting makes sense on rotational media where the outer tracks
have twice the bandwidth of the inner tracks. However, it is detrimental
on nonrotational media such as solid state disks, where the only effect
is to ensure that metaslabs enter the best-fit allocation behavior
sooner, which is detrimental to performance. It also makes no sense on
files where the underlying filesystem can arrange things however it
wants.
Author: Richard Yao <ryao@gentoo.org>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3712zfsonlinux/zfs@fb40095f5f
To reduce code divergence this merge replaces equivalent but different
FreeBSD code detecting non-rotating medium vdevs.
MFC after: 1 month
Before sequential scrub patches ZFS never aggregated I/Os above 128KB.
Sequential scrub bumped that to 1MB, which motivation I understand for
spinning disks, since it should reduce number of head seeks. But for
SSDs it makes much less sense to me, especially on FreeBSD, where due
to MAXPHYS limitation device will likely still see bunch of 128KB I/Os
instead of one large. Having more strict aggregation limit allows to
avoid allocation of large memory buffer and memcpy to/from it, that is
a serious problem when bandwidth reaches few GB/s.
MFC after: 1 month
Sponsored by: iXsystems, Inc.
Update the bounds checking for zfs_vdev_aggregation_limit so that
it has a floor of zero and a maximum value of the supported block
size for the pool.
Additionally add an early return when zfs_vdev_aggregation_limit
equals zero to disable aggregation. For very fast solid state or
memory devices it may be more expensive to perform the aggregation
than to issue the IO immediately.
Author: Brian Behlendorf <behlendorf1@llnl.gov>
zfsonlinux/zfs@a58df6f536
MFV/ZoL: Cap maximum aggregate IO size
Commit 8542ef8 allowed optional IOs to be aggregated beyond
the specified aggregation limit. Since the aggregation limit
was also used to enforce the maximum block size, setting
`zfs_vdev_aggregation_limit=16777216` could result in an
attempt to allocate an ABD larger than 16M.
Author: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#6259Closes#6270zfsonlinux/zfs@2d678f779a
I just found that at least on Skylake CPUs cpu_ticks() never returns odd
values, only even, and possibly has even bigger step (176/2?), that makes
its lower bits very bad entropy source, leaving half of taskqueues unused.
Switch to sbinuptime(), closer to upstreams, mitigates the problem by the
rate conversion working as kind of hash function. In case that is somehow
not enough (timer rate is too low or too divisible) mix in curcpu.
MFC after: 1 week
- Don't leak the ksiginfo structure.
- Hold the proc lock when sending a signal in fasttrap_sigsegv().
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The file has not been touched upstream in over a decade, and the nature
of the code means that a lot of FreeBSD-specific bits are required. Remove
the dead code to improve readability. No functional change intended.
Discussed with: cem
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
No platforms except i386, amd64 and powerpc implement fasttrap; the
fasttrap files for other arches do not contain any code and bloat
the output from cscope, so just remove them.
MFC after: 1 week
fasttrap hooks the userspace breakpoint handler; the hook looks up the
breakpoint address in a hash table of tracepoints. It is possible for
the tracepoint to be removed by a different thread in between the
breakpoint trap and the hash table lookup, in which case SIGTRAP gets
delivered to the target process. Fix the problem by adding a
per-process generation counter that gets incremented when a tracepoint
belonging to that process is removed. Then, when a lookup fails, the
trapping instruction is restarted if the thread's counter doesn't match
that of the process.
Reviewed by: cem
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19273
a vdev that has the same name as the one stored in metadata and that has
all VDEV labels in place. If it cannot find a GEOM provider with the given
name and all VDEV labels it will scan all GEOM providers for the best match
(the most VDEV labels available), but here the name is ignored.
In case the ZFS pool is created, eg. using GPT partition label:
# zpool create tank /dev/gpt/tank
everything works, and on every import ZFS will pick /dev/gpt/tank and
not /dev/da0p4.
The problem occurs when da0p4 is extended and ZFS is unable to find all
VDEV labels in /dev/gpt/tank anymore (the VDEV labels stored at the end
of the partition are now somewhere else). In this case it will scan all
GEOM providers and will pick the first one with the best match, ie. da0p4.
Fix this problem by checking the VDEV/provider name even if we get the same
match. If the name is the same as the one we have in pool's metadata, prefer
this GEOM provider.
Reported by: oshogbo, Michal Mroz <m.mroz@fudosecurity.com>
Tested by: Michal Mroz <m.mroz@fudosecurity.com>
Obtained from: Fudo Security
In all cases where ZFS sends BIO_FLUSH, it first waits for all related
writes to complete, so its BIO_FLUSH does not care about strict ordering.
Removal of one makes life much easier at least for NVMe driver, which
hardware has no concept of request ordering, relying completely on software.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
There is no reason for this variable to be tunable.
This variable is used as a barrier in few places.
Discussed with: pjd
MFC after: 2 weeks
Sponsored by: Fudo Security
UFS will return EINVAL when quotas are not enabled on a filesystem; ZFS'
equivalent involves not having quotas (there is not way to enable or disable
quotas as such). My initial implementation had it return ENOENT, but
quotactl(2) indicates EINVAL is more appropriate.
MFC after: 2 weeks
Approved by: mav
Reviewed by: markj
Reported by: Emrion <kmachine@free.fr>
Sponsored by: iXsystems Inc
PR: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=234413
Note that this commit brings only formatting changes that were done
during the final review of the illumos change, because FreeBSD got the
main changes before illumos.
illumos/illumos-gate@04e563565204e5635652https://www.illumos.org/issues/5882
This is an import of the temporary pool names functionality from ZoL:
e2282ef57e26b42f3f9d2f3ec9006100d2a8c92f83e9986f6e023bbe6f01
It is intended to assist the creation and management of virtual machines
that have their rootfs on ZFS on hosts that also have their rootfs on
ZFS. These situations cause SPA namespace collisions when the standard
name rpool is used in both cases. The solution is either to give each
guest pool a name unique to the host, which is not always desireable, or
boot a VM environment containing an ISO image to install it, which is
cumbersome.
MFC after: 1 week
Sponsored by: Panzura