Commit Graph

36 Commits

Author SHA1 Message Date
Warner Losh
c7a0a4c076 We don't need the dependency on the pccard module here. 2004-05-08 06:06:13 +00:00
Luigi Rizzo
0318355d0e Remove improper use of if_addrhead in device drivers to check
if the link-level address has been initialized already.

The majority of modern drivers never does this and works fine, which
makes me think that the check is totally unnecessary and a residue
of cut&paste from other drivers.

This change is done to simplify locking because now almost none of the
drivers uses this field. The exceptions are "ct" "ctau" and "cx"
where i am not sure if i can remove that part.
2004-04-15 20:31:10 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
Matthew N. Dodd
e3bbbec2ca Announce ethernet MAC addresss in ether_ifattach(). 2004-03-14 07:12:25 +00:00
Warner Losh
fcedf425bd o Add sysctl to allow ignoring checksum of eeprom.
o Fix minor type problems
o Fix minor problem with a couple debug printfs.
o Default to a sane media type when none is reported.
o Minor style changes

The PR complains this will fix the IBM 300GL cards.

Submitted by: Max Gotlib
PR: 11462
2003-11-04 02:59:57 +00:00
Brooks Davis
9bf40ede4a Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By:	re (in principle)
Reviewed By:	njl, imp
Tested On:	i386, amd64, sparc64
Obtained From:	NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
Brooks Davis
c020a92f9f There is no way to enter the attach routine twice with the same softc
without a detach call in between so don't try to deal with that
possiability.

This is a diff-reduction commit for the upcoming if_xname conversion.
2003-10-30 19:45:58 +00:00
David E. O'Brien
aad970f1fe Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
Matthew N. Dodd
f246e4a17f - Express hard dependencies on bus (pci, isa, pccard) and
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
  such abuse isn't really needed.  (And if we do need type information
  associated with a module then we should make it explicit and not
  use hacks.)
2003-04-15 06:37:30 +00:00
Warner Losh
f5746231ff Make sure that pp_name is non-null before setting the device
description.  This allows us to rely entirely on the CIS entries if
necessary...
2003-04-10 04:36:02 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Sam Leffler
673d91916d network interface driver changes:
o don't strip the Ethernet header from inbound packets; pass packets
  up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by:	many
Approved by:	re
2002-11-14 23:54:55 +00:00
Brooks Davis
3a6ceb1592 Use if_printf(ifp, "blah") instead of
printf(CS_NAME"%d: blah", ifp->if_unit);
2002-10-01 00:46:41 +00:00
Warner Losh
9de4df498c Migrate to PCMCIA_CARD() macros 2001-11-15 07:52:49 +00:00
Warner Losh
269b3a8211 s/PCCARD_/PCMCIA_/g in NEWCARD device tables to enable easier NetBSD sharing 2001-11-11 20:17:10 +00:00
Warner Losh
e1b10b380d Additional enhancments to allow IBM Etherjet cards to be probed,
attached and ifconfigable.  The card doesn't interrupt yet.

Also, move towards bus space by introducing new macros/inline
functions which make such a move much easier than before.

These inline functions are setup now to work around an IBM EtherJet
pccard cardbus bridge incompatibility.  The card works in 8 bit mode,
but not in 16-bit mode when it is connected to a cardbus bridge for
reasons unknown.  The Linux driver also has a similar workaround in
it.

Future work will include making the above workaround runtime
conditional rather than compile time conditional, as well as fixing
the interrupts in pccards and converting it to bus space.
2001-02-23 08:08:21 +00:00
Warner Losh
11f3349f34 Break the isa attachment of the Crystal Semiconductor 89x0 into two
parts: isa and pccard.  The isa one is known to work with an IBM
EtherJet ISA card.  The pccard one isn't known to work because the
EtherJet pccard I purchased recently arrived DOA :-(.  I'll commit the
pccard.conf entry when the replacement card arrives.

I plan on MFC this in a week or two.
2001-01-21 04:56:12 +00:00
Poul-Henning Kamp
db7e3af111 Remove unneeded #include <machine/clock.h> 2000-10-15 14:19:01 +00:00
Archie Cobbs
21b8ebd926 Make all Ethernet drivers attach using ether_ifattach() and detach using
ether_ifdetach().

The former consolidates the operations of if_attach(), ng_ether_attach(),
and bpfattach(). The latter consolidates the corresponding detach operations.

Reviewed by:	julian, freebsd-net
2000-07-13 22:54:34 +00:00
Archie Cobbs
2e2de7f23f Move code to handle BPF and bridging for incoming Ethernet packets out
of the individual drivers and into the common routine ether_input().
Also, remove the (incomplete) hack for matching ethernet headers
in the ip_fw code.

The good news: net result of 1016 lines removed, and this should make
bridging now work with *all* Ethernet drivers.

The bad news: it's nearly impossible to test every driver, especially
for bridging, and I was unable to get much testing help on the mailing
lists.

Reviewed by:	freebsd-net
2000-05-14 02:18:43 +00:00
Warner Losh
5664bf9cea NewBus the cs driver.
Submitted by: max@rsu.ru
2000-03-30 05:16:16 +00:00
Poul-Henning Kamp
46783fb897 Remove NBPF conditionality of bpf calls in most of our network drivers.
This means that we will not have to have a bpf and a non-bpf version
of our driver modules.

This does not open any security hole, because the bpf core isn't loadable

The drivers left unchanged are the "cross platform" drivers where the respective
maintainers are urged to DTRT, whatever that may be.

Add a couple of missing FreeBSD tags.
1999-09-25 12:06:01 +00:00
Peter Wemm
a3d5686298 Stub out the old pnp code till these are converted so GENERIC builds again. 1999-09-02 04:37:07 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Dag-Erling Smørgrav
6b5ca0d83e Rename bpfilter to bpf. 1999-07-06 19:23:32 +00:00
Peter Wemm
6182fdbda8 Bring the 'new-bus' to the i386. This extensively changes the way the
i386 platform boots, it is no longer ISA-centric, and is fully dynamic.
Most old drivers compile and run without modification via 'compatability
shims' to enable a smoother transition.  eisa, isapnp and pccard* are
not yet using the new resource manager.  Once fully converted, all drivers
will be loadable, including PCI and ISA.

(Some other changes appear to have snuck in, including a port of Soren's
 ATA driver to the Alpha.  Soren, back this out if you need to.)

This is a checkpoint of work-in-progress, but is quite functional.

The bulk of the work was done over the last few years by Doug Rabson and
Garrett Wollman.

Approved by:	core
1999-04-16 21:22:55 +00:00
Matthew Dillon
0a5e03dda5 Fix warnings in preparation for adding -Wall -Wcast-qual to the
kernel compile
1999-01-28 01:59:53 +00:00
Eivind Eklund
0044fd3054 Clean up warnings; a couple of these came because of genuine errors in
parameter passing (passing a pointer to u_short where a pointer to int
is expected), for which the bugs have been fixed.
1999-01-12 00:27:43 +00:00
Archie Cobbs
f1d19042b0 The "easy" fixes for compiling the kernel -Wunused: remove unreferenced static
and local variables, goto labels, and functions declared but not defined.
1998-12-07 21:58:50 +00:00
Bruce Evans
fe310de802 Initialize isa_devtab entries for interrupt handlers in individual
device drivers, not in ioconf.c.  Use a different hack in isa_device.h
so that a new config(8) is not required yet.

pc98 parts approved by: kato
1998-10-22 05:58:45 +00:00
Mike Smith
b0773b5098 At net-jp@jp.freebsd.org mailing list, if_cs user in Japan
reported bug.

  At using tcpdump for cs interface, tcpdump only dump packet which
src or dst MAC-address is cs interface. cs interface can't look up
packet between others.

Submitted by:	MIHIRA "Sanpei" Yoshiro <sanpei@sanpei.org>
1998-10-04 02:11:15 +00:00
Mike Smith
8abff6b13b Enable duplex autodetection if UTP media are autodetected.
Add a sysctl 'machdep.cs_recv_delay' to specify how long to wait after
receiving a packet in order to check for a subsequent (back-to-back)
packet.  The cs8900 has a very small receive buffer, so this helps avoid
overflows at the cost of some extra CPU overhead.

Submitted by:	Oleg Sharoiko <os@rsu.ru>, MIHIRA "Sanpei" Yoshiro <sanpei@sanpei.org>
1998-08-27 22:41:18 +00:00
Mike Smith
87fffb7ca3 Fix BNC/AUI autodetection.
Submitted by:	MIHIRA "Sanpei" Yoshiro <sanpei@sanpei.org>
Submitted by:	Oleg Sharoiko <os@rsu.ru>
1998-08-13 20:31:17 +00:00
Bruce Evans
0e4801883f Removed unused includes. 1998-08-12 18:02:48 +00:00
Mike Smith
b16d163da1 Add the 'cs' driver for Crystal Semiconductor CS89x0 devices. This
supports PnP and if_media.  I've been running a slightly older version
here for several weeks now.
Submitted by:	Maxim Bolotin <max@rsu.ru>
1998-07-20 20:00:43 +00:00