The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
All I/O requests through the taste consumers are synchronous, done
with g_read_data() and without any locks held. It makes no sense
to delegate the I/O to g_down/g_up threads.
This removes many of context switches during disk retaste.
MFC after: 2 weeks
Ensure that string buffers and pad bytes are zero-filled before writing
gconcat metadata. Also make sure to zero the full block buffer before
encoding the metadata and writing.
Fix some style bugs in g_concat_write_metadata() while here.
Reported by: KMSAN
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Implement the "gconcat append" command which can be used
to append a disk to the end of an existing gconcat device
without unmounting.
If the gconcat device is using the "automatic" method, i.e.,
stores metadata on the devices, new metadata is written
to all existing components, as well as to the newly added one.
Pull Request: https://github.com/freebsd/freebsd-src/pull/472
Reviewed by: imp@
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
While some geom layers pass unknown commands down, not all do. For the ones that
don't, pass BIO_SPEEDUP down to the providers that constittue the geom, as
applicable. No changes to vinum or virstor because I was unsure how to add this
support, and I'm also unsure how to test these. gvinum doesn't implement
BIO_FLUSH either, so it may just be poorly maintained. gvirstor is for testing
and not supportig BIO_SPEEDUP is fine.
Reviewed by: chs
Differential Revision: https://reviews.freebsd.org/D23183
Similar to what was done for device_printfs in r347229.
Convert g_print_bio() to a thin shim around g_format_bio(), which acts on an
sbuf; documented in g_bio.9.
Reviewed by: markj
Discussed with: rlibby
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21165
When it comes to megabytes of text, difference between sbuf_printf() and
sbuf_cat() becomes substantial.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
g_handleattr() fills out bp->bio_completed; otherwise, g_getattr()
returns an error in response to the query. This caused BIO_DELETE
support to not be propagated through stacked configurations, e.g.,
a gconcat of gmirror volumes would not handle BIO_DELETE even when
the gmirrors do. g_io_getattr() was not affected by the problem.
PR: 232676
Reported and tested by: noah.bergbauer@tum.de
MFC after: 1 week
GEOM ELI may double ask the password during boot. Once at loader time, and
once at init time.
This happens due a module loading bug. By default GEOM ELI caches the
password in the kernel, but without the MODULE_VERSION annotation, the
kernel loads over the kernel module, even if the GEOM ELI was compiled into
the kernel. In this case, the newly loaded module
purges/invalidates/overwrites the GEOM ELI's password cache, which causes
the double asking.
MFC Note: There's a pc98 component to the original submission that is
omitted here due to pc98 removal in head. This part will need to be revived
upon MFC.
Reviewed by: imp
Submitted by: op
Obtained from: opBSD
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14992
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
These changes prevent sysctl(8) from returning proper output,
such as:
1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.
Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
When safety requirements are met, it allows to avoid passing I/O requests
to GEOM g_up/g_down thread, executing them directly in the caller context.
That allows to avoid CPU bottlenecks in g_up/g_down threads, plus avoid
several context switches per I/O.
The defined now safety requirements are:
- caller should not hold any locks and should be reenterable;
- callee should not depend on GEOM dual-threaded concurency semantics;
- on the way down, if request is unmapped while callee doesn't support it,
the context should be sleepable;
- kernel thread stack usage should be below 50%.
To keep compatibility with GEOM classes not meeting above requirements
new provider and consumer flags added:
- G_CF_DIRECT_SEND -- consumer code meets caller requirements (request);
- G_CF_DIRECT_RECEIVE -- consumer code meets callee requirements (done);
- G_PF_DIRECT_SEND -- provider code meets caller requirements (done);
- G_PF_DIRECT_RECEIVE -- provider code meets callee requirements (request).
Capable GEOM class can set them, allowing direct dispatch in cases where
it is safe. If any of requirements are not met, request is queued to
g_up or g_down thread same as before.
Such GEOM classes were reviewed and updated to support direct dispatch:
CONCAT, DEV, DISK, GATE, MD, MIRROR, MULTIPATH, NOP, PART, RAID, STRIPE,
VFS, ZERO, ZFS::VDEV, ZFS::ZVOL, all classes based on g_slice KPI (LABEL,
MAP, FLASHMAP, etc).
To declare direct completion capability disk(9) KPI got new flag equivalent
to G_PF_DIRECT_SEND -- DISKFLAG_DIRECT_COMPLETION. da(4) and ada(4) disk
drivers got it set now thanks to earlier CAM locking work.
This change more then twice increases peak block storage performance on
systems with manu CPUs, together with earlier CAM locking changes reaching
more then 1 million IOPS (512 byte raw reads from 16 SATA SSDs on 4 HBAs to
256 user-level threads).
Sponsored by: iXsystems, Inc.
MFC after: 2 months
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
Do not close/destroy opened consumer directly in case of disconnect. Instead
keep it existing until it will be closed in regular way in response to
upstream provider destruction. Delay geom destruction in the same way.
Previous implementation could destroy consumers still having active
requests and worked only because of global workaround made on GEOM level.
No FreeBSD version bump, the userland application to query the features will
be committed last and can serve as an indication of the availablility if
needed.
Sponsored by: Google Summer of Code 2010
Submitted by: kibab
Reviewed by: silence on geom@ during 2 weeks
X-MFC after: to be determined in last commit with code from this project
depend on on-disk metadata. This was we won't attach to providers that are used
by other classes. For example we don't want to configure partitions on da0 if
it is part of gmirror, what we really want is partitions on mirror/foo.
During regular work it works like this: if provider is open for writing a class
receives the spoiled event from GEOM and detaches, once provider is closed the
taste event is send again and class can rediscover its metadata if it is still
there. This doesn't work that way when new class arrives, because GEOM gives
all existing providers for it to taste, also those open for writing. Classes
have to decided on their own if they want to deal with such providers (eg.
geom_dev) or not (classes modified by this commit).
Reported by: des, Oliver Lehmann <lehmann@ans-netz.de>
Tested by: des, Oliver Lehmann <lehmann@ans-netz.de>
Discussed with: phk, marcel
Reviewed by: marcel
MFC after: 3 days
- Prefer '_' to ' ', as it results in more easily parsed results in
memory monitoring tools such as vmstat.
- Remove punctuation that is incompatible with using memory type names
as file names, such as '/' characters.
- Disambiguate some collisions by adding subsystem prefixes to some
memory types.
- Generally prefer lower case to upper case.
- If the same type is defined in multiple architecture directories,
attempt to use the same name in additional cases.
Not all instances were caught in this change, so more work is required to
finish this conversion. Similar changes are required for UMA zone names.
completed I/O requests here.
- First allocate all needed bios, so if any of allocations fail, we can
free memory before sending any I/O requests down.
Reported by: Pawel Malachowski
MFC after: 3 days
shared-last-sector problem.
After this change, even if there is more than one provider with the same
last sector, the proper one will be chosen based on its size.
It still doesn't fix the 'c' partition problem (when da0s1 can be confused
with da0s1c) and situation when 'a' partition starts at offset 0
(then da0s1a can be confused with da0s1 and da0s1c). One can use '-h'
option there, when creating device or avoid sharing last sector.
Actually, when providers share the same last sector and their size is equal,
they provide exactly the same data, so the name (da0s1, da0s1a, da0s1c)
isn't important at all.
- Provide backward compatibility.
- Update copyright's year.
MFC after: 1 week
Actually, it can even cause some problems, because GEOM requires sectorsize
to be more than 0 on first access, not on provider creation, so we can skip
valid providers by doing this check here.
Reported by: Divacky Roman <xdivac02@stud.fit.vutbr.cz>
Sven Willenberger <sven@dmv.com>
It allows to fix problems when last provider's sector is shared between few
providers.
- Bump version number for CONCAT and STRIPE and add code for backward
compatibility.
- Do not bump version number of MIRROR, as it wasn't officially introduced yet.
Even if someone started to play with it, there is no big deal, because
wrong MD5 sum of metadata will deny those providers.
- Update manual pages.
- Add version history to g_(stripe|concat).h files.
