Commit Graph

173771 Commits

Author SHA1 Message Date
Rick Macklem
798a34fe09 Add a comment describing why r241097 was done.
Suggested by:	rwatson
MFC after:	1 week
2012-10-15 13:38:25 +00:00
Eitan Adler
429233171b Fix minor nits:
use a comma after "i.e."
sentences begin on new lines.

No .Dd bump for trivial modification.

Approved by:	wblock
MFC after:	3 days
2012-10-15 13:20:08 +00:00
Eitan Adler
8b22e82143 Add support for the USB DISK Pro PMAP.
This patch has sit for 6 years in the PR database.

PR:		usb/96381
Submitted by:	jhs
Reviewed by:	mav
Approved by:	cperciva (implicit)
MFC after:	3 days
2012-10-15 12:33:53 +00:00
Aleksandr Rybalko
26aff2abad Mask data to only 16 bits to be sure on write into switch reg.
Submitted by:	Luiz Otavio O Souza
Approved by:	adrian (mentor)
2012-10-15 12:28:14 +00:00
Aleksandr Rybalko
454d507ad8 Locking for etherswitch framework:
* add lock/unlock methods;
* add lock/unlock default implementation;
* surround switch IOCTLs with locking;
* add lock/unlock implementation for arswitch;

Submitted by:	Luiz Otavio O Souza
Approved by:	adrian (mentor)
2012-10-15 12:20:40 +00:00
Aleksandr Rybalko
daa4deac71 Defaulting to id "0" if ar7240_probe(dev) success, fix warning when building
with DEBUG.

Submitted by:	Luiz Otavio O Souza
Approved by:	adrian (mentor)
2012-10-15 12:03:11 +00:00
Maxim Sobolev
2543786a37 Add per-second scheduling into the cron(8). Right now it's
only available via the new @every_second shortcut. ENOTIME to
implement crontab(5) format extensions to allow more flexible
scheduling.

In order to address some concerns expressed by Terry Lambert
while discussing the topic few years ago, about per-second cron
possibly causing some bad effects on /etc/crontab by stat()ing
it every second instead of every minute now (i.e. atime update),
only check that database needs to be reloaded on every 60-th
loop run. This should be close enough to the current behaviour.

Add "@every_minute" shortcut while I am here.

MFC after:	1 month
2012-10-15 08:21:49 +00:00
Gleb Smirnoff
e76163a539 We don't need to convert ip6_len to host byte order before
ip6_output(), the IPv6 stack is working in net byte order.

The reason this code worked before is that ip6_output()
doesn't look at ip6_plen at all and recalculates it based
on mbuf length.
2012-10-15 07:57:55 +00:00
Tim Kientzle
83e5430018 Fix an mbuf leak in cpsw driver, clean up mbuf management:
* Record TX mbufs when we get them so we can release them.
 * Set TX/RX mbuf slots to NULL when we are no longer responsible for them
 * Move dma sync on RX into RX intr routine
2012-10-15 04:10:49 +00:00
Rick Macklem
e6f3cb32cc Add a description for the '-S' option to the mountd man page.
This is a content change.

Reviewed by:	kib
MFC after:	2 weeks
2012-10-15 00:24:23 +00:00
Rick Macklem
c548eb5cad Add a new '-S' option to mountd, which tells it to suspend
execution of the nfsd threads while it is reloading the exports.
This avoids clients from getting intermittent access errors
when the exports are being reloaded non-atomically.
It is not an ideal solution, since requests will back up while
the nfsd threads are suspended. Also, when this option is used,
if mountd crashes while reloading exports, mountd will have to
be restarted to get the nfsd threads to resume execution.
This has been tested by Vincent Hoffman (vince at unsane.co.uk)
and John Hickey (jh at deterlab.net).
The nfse patch offers a more comprehensive solution for this issue.

PR:		kern/9619, kern/131342
Reviewed by:	kib
MFC after:	2 weeks
2012-10-15 00:17:16 +00:00
Adrian Chadd
cf0c92d600 Track the total number of software queued frames in an atomic variable
stashed away in ath_node.

As much as I tried to stuff that behind the ATH_NODE lock, unfortunately
the locking is just too plain hairy (for me! And I wrote it!) to do
cleanly. Hence using atomics here instead of a lock. The ATH_NODE lock
just isn't currently used anywhere besides the rate control updates.

If in the future everything gets migrated back to using a single ATH_NODE
lock or a single global ATH_TX lock (ie, a single TX lock for all TX and
TX completion) then fine, I'll remove the atomics.
2012-10-15 00:07:18 +00:00
Adrian Chadd
13aa9ee5c2 Stop abusing the ATH_TID_*() queue macros for filtered frames and give
them their own macro set.
2012-10-14 23:52:30 +00:00
Devin Teske
42cdd52718 Mirror the changes made in SVN r240798:
Replace "( : ${var?} )" syntax with better "[ ${var+set} ]" syntax.

Reviewed by:	adrian (co-mentor)
Approved by:	adrian (co-mentor)
2012-10-14 23:45:56 +00:00
Tim Kientzle
2e88f5cd34 Cut-and-paste dropped semicolon. 2012-10-14 23:07:54 +00:00
Tim Kientzle
4cc21ce89a Name cpsw_stop to cpsw_stop_locked consistently with other functions
in this file that assume locks are already held.
2012-10-14 23:00:24 +00:00
Tim Kientzle
a97afde093 Return correct packet size. 2012-10-14 22:58:12 +00:00
Rick Macklem
6001db296e Add two new options to the nfssvc(2) syscall that allow
processes running as root to suspend/resume execution
of the kernel nfsd threads. An earlier version of this
patch was tested by Vincent Hoffman (vince at unsane.co.uk)
and John Hickey (jh at deterlab.net).

Reviewed by:	kib
MFC after:	2 weeks
2012-10-14 22:33:17 +00:00
Adrian Chadd
8e7393944d Push the actual TX processing into the ath taskqueue, rather than having
it run out of multiple concurrent contexts.

Right now the ath(4) TX processing is a bit hairy. Specifically:

* It was running out of ath_start(), which could occur from multiple
  concurrent sending processes (as if_start() can be started from multiple
  sending threads nowdays.. sigh)

* during RX if fast frames are enabled (so not really at the moment, not
  until I fix this particular feature again..)

* during ath_reset() - so anything which calls that

* during ath_tx_proc*() in the ath taskqueue - ie, TX is attempted again
  after TX completion, as there's now hopefully some ath_bufs available.

* Then, the ic_raw_xmit() method can queue raw frames for transmission
  at any time, from any net80211 TX context. Ew.

This has caused packet ordering issues in the past - specifically,
there's absolutely no guarantee that preemption won't occuring _during_
ath_start() by the TX completion processing, which will call ath_start()
again. It's a mess - 802.11 really, really wants things to be in
sequence or things go all kinds of loopy.

So:

* create a new task struct for TX'ing;
* make the if_start method simply queue the task on the ath taskqueue;
* make ath_start() just be called by the new TX task;
* make ath_tx_kick() just schedule the ath TX task, rather than directly
  calling ath_start().

Now yes, this means that I've taken a step backwards in terms of
concurrency - TX -and- RX now occur in the same single-task taskqueue.
But there's nothing stopping me from separating out the TX / TX completion
code into a separate taskqueue which runs in parallel with the RX path,
if that ends up being appropriate for some platforms.

This fixes the CCMP/seqno concurrency issues that creep up when you
transmit large amounts of uni-directional UDP traffic (>200MBit) on a
FreeBSD STA -> AP, as now there's only one TX context no matter what's
going on (TX completion->retry/software queue,
userland->net80211->ath_start(), TX completion -> ath_start());
but it won't fix any concurrency issues between raw transmitted frames
and non-raw transmitted frames (eg EAPOL frames on TID 16 and any other
TID 16 multicast traffic that gets put on the CABQ.)  That is going to
require a bunch more re-architecture before it's feasible to fix.

In any case, this is a big step towards making the majority of the TX
path locking irrelevant, as now almost all TX activity occurs in the
taskqueue.

Phew.
2012-10-14 20:44:08 +00:00
Adrian Chadd
516f67965a Break the RX processing up into smaller chunks of 128 frames each.
Right now processing a full 512 frame queue takes quite a while (measured
on the order of milliseconds.) Because of this, the TX processing ends up
sometimes preempting the taskqueue:

* userland sends a frame
* it goes in through net80211 and out to ath_start()
* ath_start() will end up either direct dispatching or software queuing a
  frame.

If TX had to wait for RX to finish, it would add quite a few ms of
additional latency to the packet transmission.  This in the past has
caused issues with TCP throughput.

Now, as part of my attempt to bring sanity to the TX/RX paths, the first
step is to make the RX processing happen in smaller 'parts'. That way
when TX is pushed into the ath taskqueue, there won't be so much latency
in the way of things.

The bigger scale change (which will come much later) is to actually
process the frames in the ath_intr taskqueue but process _frames_ in
the ath driver taskqueue.  That would reduce the latency between
processing and requeuing new descriptors. But that'll come later.

The actual work:

* Add ATH_RX_MAX at 128 (static for now);
* break out of the processing loop if npkts reaches ATH_RX_MAX;
* if we processed ATH_RX_MAX or more frames during the processing loop,
  immediately reschedule another RX taskqueue run.  This will handle
  the further frames in the taskqueue.

This should have very minimal impact on the general throughput case,
unless the scheduler is being very very strange or the ath taskqueue
ends up spending a lot of time on non-RX operations (such as TX
completion.)
2012-10-14 20:31:38 +00:00
Konstantin Belousov
9b233e2307 Add a KPI to allow to reserve some amount of space in the numvnodes
counter, without actually allocating the vnodes. The supposed use of
the getnewvnode_reserve(9) is to reclaim enough free vnodes while the
code still does not hold any resources that might be needed during the
reclamation, and to consume the slack later for getnewvnode() calls
made from the innards. After the critical block is finished, the
caller shall free any reserve left, by getnewvnode_drop_reserve(9).

Reviewed by:	avg
Tested by:	pho
MFC after:	1 week
2012-10-14 19:43:37 +00:00
Nick Hibma
da016e84de Implement modem control in u3g. Tested on Option GTM382W, Huawei E220,
and Sierra Wireless MC8790V. Also implement the .ucom_poll method.

Note: This makes it possible to use lqr/echo in ppp.conf. And it
resolves ppp hanging during the PPp> phase.

Reviewed by:	hps
MFC after:	1 week
2012-10-14 19:15:54 +00:00
Konstantin Belousov
82ed933c6f Grammar fixes.
Submitted by:	bf
MFC after:	1 week
2012-10-14 18:13:33 +00:00
Eitan Adler
d6025c7bb7 Add support for the extrememory Snippy
PR:		usb/159611
Submitted by:	Fabian Keil <fk@fabiankeil.de>
Approved by:	cperciva (implicit)
MFC after:	3 days
2012-10-14 17:26:45 +00:00
Eitan Adler
c0f4985dbd Add support for Feiya Elango USB MicroSD
PR:		usb/153599
Submitted by:	CyberLeo <cyberleo@cyberleo.net>
Approved by:	cperciva (implicit)
MFC after:	3 days
2012-10-14 17:26:40 +00:00
Eitan Adler
35ed5bb738 Add support for the Buffalo RUF2 flash drive.
PR:		usb/166848
Submitted by:	Andrew Gregory <andrew@scss.com.au>
Reviewed by:	hselasky
Approved by:	cperciva (implicit)
MFC after:	3 days
2012-10-14 17:26:32 +00:00
Konstantin Belousov
737ced3ecf MFamd64: add machdep.uprintf_signal.
MFC after:	1 week
2012-10-14 17:09:50 +00:00
Konstantin Belousov
802431fa2e Print the %rip value for uprintf_signal.
MFC after:	1 week
2012-10-14 17:08:46 +00:00
Konstantin Belousov
806efacae0 Replace the XXX comment with the proper description.
MFC after:	1 week
2012-10-14 17:07:34 +00:00
Gleb Smirnoff
347d90acff Fix a miss from r241344: in ip_mloopback() we need to go to
net byte order prior to calling in_delayed_cksum().

Reported by:	 Olivier Cochard-Labbe <olivier cochard.me>
2012-10-14 15:08:07 +00:00
Gleb Smirnoff
40dd089521 Fix defines in r241245. We actually don't define FreeBSD.
Reported & tested by:	Oleg Ginzburg
2012-10-14 15:03:06 +00:00
Joel Dahl
284eab32c0 mdoc: avoid nested displays. 2012-10-14 14:45:54 +00:00
Joel Dahl
a2442c2fa9 mdoc: don't nest displays. The markup here isn't adding anything anyway.
Fixes a mandoc lint warning.

Discussed with:	brueffer, Jason McIntyre <jmc@kerhand.co.uk>
2012-10-14 13:59:17 +00:00
Eitan Adler
324e813d46 Bump .Dd
Approved by:	joel
2012-10-14 13:45:13 +00:00
Eitan Adler
c2f6b6182b Don't document the PORTSSUPFILE variable. Even though this still works,
try to discourage users from depending on it.

Approved by:	joel
MFC after:	3 days
2012-10-14 13:41:42 +00:00
Joel Dahl
a28832ef7b Minor mdoc improvements. Also remove unnecessary csup reference. 2012-10-14 10:26:29 +00:00
Andriy Gapon
851dbc07af pciereg_cfg*: use assembly to access the mem-mapped cfg space
AMD BKDG for CPU families 10h and later requires that the memory
mapped config is always read into or written from al/ax/eax register.

Discussed with:	kib, alc
Reviewed by:	kib (earlier version)
MFC after:	25 days
2012-10-14 10:13:50 +00:00
Joel Dahl
a01d461b70 Remove cvs/cvsup reference. 2012-10-14 10:12:32 +00:00
Andriy Gapon
9548b507cb acpi_thermal: when _ACx is tripped, all _ALi i>= x should be on
... and not just _ALx as it is now.

MFC after:	20 days
2012-10-14 09:32:38 +00:00
Andriy Gapon
178f3ce611 acpi_wmi: move wmi_info_list into sc
different instances of acpi_wmi couldn't properly share it and, in fact,
there was no reason to do that

MFC after:	10 days
2012-10-14 09:31:11 +00:00
Alexander Motin
f8ff57d287 Add explicit check for not set time inside cam_periph_freeze_after_event().
System time is set later on boot process then initial bus scan by CAM.
Until that moment microtime() is equal to microuptime(), and if system
boots quickly, the value can be close to zero. That causes settle time
waiting even for buses that don't use reset during probe.

On my test system this reduces boot time by 1 second if USB enabled, or
by 4 seconds if USB disabled.  CAM waited for ctl2cam0 bus "settle".
2012-10-14 08:50:05 +00:00
Joel Dahl
d0fd6bb00e Remove trailing whitespace. 2012-10-14 07:22:56 +00:00
Joel Dahl
33656abea6 Minor mdoc and language fixes. 2012-10-14 07:19:42 +00:00
Devin Teske
55f9ff659d Since the introduction of the new advanced boot menu (r222417), options like
"boot verbose", "single user mode", "ACPI" and more are now stateful boolean
menuitems rather than direct action-items.

A short-coming in this new menu system is that when a user sets a non-default
value in loader.conf(5), this non-default state is not reflected in the menu
-- leading to confusion as to whether the option was taking effect or not.

This patch adds dynamic menuitem constructors _and_ the necessary Forth
callbacks to initialize these stateful menuitems -- causing the aforementioned
menuitems to adhere to loader.conf(5) settings.

PR:		bin/172529
Approved by:	adrian (co-mentor)
MFC after:	21 days
2012-10-14 06:52:49 +00:00
Attilio Rao
d14cfe6e65 getopt_long() returns an int. Use the return value accordingly.
Pointy hat to:	me
MFC after:	2 months
X-MFC:		r241519,241521
2012-10-14 03:59:17 +00:00
Attilio Rao
4cff153b87 Rename s/DEBUG()/FS_DEBUG() and s/DEBUG2G()/FS_DEBUG2G() in order to
avoid a name clash in sparc64.

MFC after:	2 months
X-MFC:		r241519
2012-10-14 03:51:59 +00:00
Alan Cox
3bd3f63d50 Correct an error in pmap_pv_reclaim(). It can legitimately encounter
wired mappings.  If it does, it should just skip them.
2012-10-14 03:40:08 +00:00
Attilio Rao
5fe580195f Import a FreeBSD port of the FUSE Linux module.
This has been developed during 2 summer of code mandates and being revived
by gnn recently.
The functionality in this commit mirrors entirely content of fusefs-kmod
port, which doesn't need to be installed anymore for -CURRENT setups.

In order to get some sparse technical notes, please refer to:
http://lists.freebsd.org/pipermail/freebsd-fs/2012-March/013876.html

or to the project branch:
svn://svn.freebsd.org/base/projects/fuse/

which also contains granular history of changes happened during port
refinements. This commit does not came from the branch reintegration
itself because it seems svn is not behaving properly for this functionaly
at the moment.

Partly Sponsored by:		Google, Summer of Code program 2005, 2011
Originally submitted by:	ilya, Csaba Henk <csaba-ml AT creo DOT hu >
In collabouration with:		pho
Tested by:			flo, gnn, Gustau Perez,
				Kevin Oberman <rkoberman AT gmail DOT com>
MFC after:			2 months
2012-10-13 23:54:26 +00:00
Alan Cox
7ecfabc7bb Move vm_page_requeue() to the only file that uses it.
MFC after:	3 weeks
2012-10-13 20:19:43 +00:00
Steve Kargl
f81d134e7e * Update the comment that explains the choice of values in the
table and the requirement on trailing zero bits.

* Remove the __aligned() compiler directives as these were found
  to have a negative effect on the produced code.

Submitted by:	bde
Approved by:	das (mentor)
2012-10-13 19:53:11 +00:00