This fixes an integer overflow for very large partitions around 35 billion
filenames (>2PB). However, in an artificially worst case it may occurs
by only 17 mio filenames on a partition.
As documented in the HiFive Unmatched Software Reference Manual.
Reviewed by: imp, mhorne
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34010
While LLDB on powerpc and powerpcspe builds as-is, on powerpc64 and
powerpc64le it requires adding a couple of additional source files
to build.
Differential review: https://reviews.freebsd.org/D34043
Approved by: dim, imp, emaste
This function will be used by coming TLS hardware receive offload support.
Differential Revision: https://reviews.freebsd.org/D32356
Discussed with: jhb@
MFC after: 1 week
Sponsored by: NVIDIA Networking
Although send tags are strictly used for transmit, the name might be changed
in the future to be more generic.
The TLS receive tags support regular IPv4 and IPv6 traffic, and also over any
VLAN. If prio-tagging is enabled, VLAN ID zero, this must be checked in the
network driver itself when creating the TLS RX decryption offload filter.
TLS receive tags have a modify callback to tell the network driver about
the progress of decryption. Currently decryption is done IP packet by IP
packet, even if the IP packet contains a partial TLS record. The modify
callback allows the network driver to keep track of TCP sequence numbers
pointing to the beginning of TLS records after TCP packet reassembly.
These callbacks only happen when encrypted or partially decrypted data is
received and are used to verify the decryptions starting point for the
hardware. Typically the hardware will guess where TLS headers start and
needs help from the software to know if the guess was correct. This is
the purpose of the modify callback.
Differential Revision: https://reviews.freebsd.org/D32356
Discussed with: jhb@
MFC after: 1 week
Sponsored by: NVIDIA Networking
This flag allows a full text search on man pages. Although this is a last resort
option, it can be useful to pin point a certain man page.
It can be used with -S to narrow the search.
Unlike the Linux version, the search takes place in the rendered text so it
avoids false-positives when the text is found in comments in the source files.
It relies on `grep(1)` and `mandoc(1)` to do its job.
Add flag documentation and EXAMPLES to the manual page (bump .Dd).
Usage example:
man -w -K '\<arm\>' -S 1:8
Reviewed By: ceri, emaste, pauamma_gundo.com
Approved by: manpages (bcr@), debdrup@
Differential Revision: https://reviews.freebsd.org/D30984
TCP_BBR:
- Fix a typo introducted in 1b90dfa5d2, which was reported by tuexen@
TCP_RACK:
- Correct two sysctl descriptions: s/corret/correct/
tcp_bbr(4): Also fix s/measurment/measurement/ in the man page
MFC after: 1 week
The CAM subsystem uses bus:taget:lun tuple to address peripherals. But
for convenience many userland programs such as camcontrol accept devices
names such as da0. There is a libcam function, cam_open_device, to
support that. It first calls cam_get_device() to parse the device name
as a driver name and a unit (and handle some special device name
prefixes) and then uses cam_lookup_pass() to find a matching pass
device.
This change extends cam_get_device() to apply realpath(3) to the device
name before parsing it. This will allow to use tools such as camcontrol
and smartctl with symbolic links that could be friendlier (more
distinguished) names for devices.
MFC after: 3 weeks
Relnotes: maybe
There's a small race in freezing the simq when performing a diagnostic
reset. During this time, a transaction can slip through and encounter
the target id of 0. If we're still in diagnostic reset when we detect
this, return a CAM_DEVICE_NOT_THERE status. Instead, freeze the queue
and return a requeue status, similar to what we do when we're resetting
a target and a transaction get here. The race is unavoidable due to
separate locks for queue and SIM, but easy enough to detect and make
harmless.
Sponsored by: Netflix
Reviewed by: scottl, mav
Differential Revision: https://reviews.freebsd.org/D34017
This matches libc and rtld in using the alignment (TLS_TCB_ALIGN) from
machine/tls.h instead of hardcoding 16.
Reviewed by: kib
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D34023
armeb is no longer a supported MACHINE_ARCH.
Reviewed by: imp, emaste
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D34019
This was only used for MIPS hard-float architectures.
Reviewed by: imp
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D34018
This is needed to get mediasize of the device after a resize event.
I missed this earlier as I was building WITH_BHYVE_SNAPSHOT, which
disables capsicum.
Reviewed by: khng, markj
Fixes: ae9ea22e14 ("bhyve: get mediasize for character devices when ...")
Differential Revision: https://reviews.freebsd.org/D34013
otherwise the data is just dropped. Check for current position equal to
the buffer base at the entry of the function; if not equal, setvbuf()
was done from the write method and it is not our business to override
the decision.
PR: 76398
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D34007
Add i2c support to linuxkpi. This is needed by drm-kmod.
For every i2c_adapter added by i2c_add_adapter we add a child to the
device named "lkpi_iic". This child handle the conversion between
Linux i2c_msgs to FreeBSD iic_msgs.
For every i2c_adapter added by i2c_bit_add_bus we add a child to the
device named "lkpi_iicbb". This child handle the conversion between
Linux i2c_msgs to FreeBSD iic_msgs.
With the help of iic(4), this expose the i2c controller to userspace
allowing a user to query DDC information from a monitor.
e.g.: i2c -f /dev/iic0 -a 0x28 -c 128 -d r
will query the standard EDID from the monitor if plugged.
The bitbang part (lkpi_iicbb) isn't tested at all for now as I don't have
compatible hardware (all my hardware have native i2c controller).
Tested on: Intel (SandyBridge, Skylake, ApolloLake)
Tested on: AMD (Picasso, Polaris (amd64 and arm64))
MFC after: 1 month
Reviewed by: hselasky
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33053
Don't emit warnings; this isn't any different from a Linux kernel
built without OPTIONS_SECCOMP, so the userspace already needs to know
how to deal with it. This is also similar with how we handle seccomp
in linux_prctl().
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D33808
We have the authorization from the University of California to remove
the advertising clause for a while, wosch@ who also hold a copyright
on this code also approved the relicensing
Approved by: wosch@
MFC after: 3 days
There is no guarentee that upon return of 'jail -r' all jail resources
will be released. The test suite used to rely on that. Recent changes
to the PCB zones made jails delay releasing their resources, which ended
with interface leak in the test suite.
Fix that by executing 'ifconfig foo0 destroy' inside the jail, instead
of doing 'jail -r' and expecting interfaces to pop up back immediately
in the parent jail.
Reviewed by: kp
Differential revision: https://reviews.freebsd.org/D33942
Try to live with cruel reality fact - if_vmove doesn't move an
interface from previous vnet cloning infrastructure to the new
one. Let's admit this as design feature and make it work better.
* Delete two blocks of code that would fallback to vnet0, if a
cloner isn't found. They didn't do any good job and also whole
idea of treating vnet0 as special one is wrong.
* When deleting a cloned interface, lookup its cloner using it's
home vnet.
With this change simple sequence works correctly:
ifconfig foo0 create
jail -c name=jj persist vnet vnet.interface=foo0
jexec jj ifconfig foo0 destroy
Differential revision: https://reviews.freebsd.org/D33942
* Do a single call into if_clone.c instead of two. The cloner
can't disappear since the interface sits on its list.
* Make restoration smarter - check that cloner with same name
exists in the new vnet.
Differential revision: https://reviews.freebsd.org/D33941
When sending an NS, check if we are using a IPv6 CARP address
and if we do, then put proper CARP link level address into
ND_OPT_SOURCE_LINKADDR option and also put PACKET_TAG_CARP tag
on the packet. The latter will enforce CARP link level address
at the data link layer too, which might be necessary for broken
implementations.
The code really follows what NA sending code has been doing since
introduction of carp(4). While here, bring to style(9) the whole
block of code.
PR: 193280
Differential revision: https://reviews.freebsd.org/D33858
This is intended to be used with forthcoming ice(4) driver version 1.34.2.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Sponsored by: Intel Corporation
Adds a new function pointer to struct if_txrx in order to allow
drivers to set their own function that will determine which queue
a packet should be sent on.
Since this includes a kernel ABI change, bump the __FreeBSD_version
as well.
(This motivation behind this is to allow the driver to examine the
UP in the VLAN tag and determine which queue to TX on based on
that, in support of HW TX traffic shaping.)
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: kbowling@, stallamr@netapp.com
Tested by: jeffrey.e.pieper@intel.com
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D31485
