Commit Graph

923 Commits

Author SHA1 Message Date
Pawel Jakub Dawidek
11631ad0d6 Use new savecore(8) option and limit number of kernel dumps that will
be kept around to the 10 most recent ones.

Add UPDATING entry with info how to return to the previous behaviour (no
limits).

Obtained from:	WHEEL Systems
2012-12-16 23:29:56 +00:00
Robert Watson
16648b4fff Merge a number of changes required to hook up OpenBSM 1.2-alpha2's
auditdistd (distributed audit daemon) to the build:

- Manual cross references
- Makefile for auditdistd
- rc.d script, rc.conf entrie
- New group and user for auditdistd; associated aliases, etc.

The audit trail distribution daemon provides reliable,
cryptographically protected (and sandboxed) delivery of audit tails
from live clients to audit server hosts in order to both allow
centralised analysis, and improve resilience in the event of client
compromises: clients are not permitted to change trail contents
after submission.

Submitted by:	pjd
Sponsored by:	The FreeBSD Foundation (auditdistd)
2012-12-01 15:11:46 +00:00
Hajimu UMEMOTO
a807918c78 Set default for ${pkg_info} like ${pkg_version}.
MFC after:	1 week
2012-10-20 18:13:20 +00:00
Hajimu UMEMOTO
57d1380d51 Use correct INDEX on 10-CURRENT. 2012-10-20 18:05:27 +00:00
Attilio Rao
2e564269d0 Disconnect non-MPSAFE SMBFS from the build in preparation for dropping
GIANT from VFS. In addition, disconnect also netsmb, which is a base
requirement for SMBFS.

In the while SMBFS regular users can use FUSE interface and smbnetfs
port to work with their SMBFS partitions.

Also, there are ongoing efforts by vendor to support in-kernel smbfs,
so there are good chances that it will get relinked once properly locked.

This is not targeted for MFC.
2012-10-18 12:04:56 +00:00
Attilio Rao
e6116d5b8e Disconnect non-MPSAFE NWFS from the build in preparation for dropping
GIANT from VFS. In addition, disconnect also netncp, which is a base
requirement for NWFS.

In the possibility of a future maintenance of the code and later
readd to the FreeBSD base, maybe we should think about a better location
for netncp. I'm not entirely sure the / top location is actually right,
however I will let network people to comment on that more specifically.

This is not targeted for MFC.
2012-10-17 11:16:17 +00:00
Attilio Rao
55793cdccf Disconnect non-MPSAFE PORTALFS from the build in preparation for dropping
GIANT from VFS.

This is not targeted for MFC.
2012-10-16 09:59:10 +00:00
Jun Kuriyama
9b9bfdcc30 - Allow to pass extra parameters for each jails.
- To achieve above, convert jail(8) invocation to use new style
  command line "-c" flag.

Reviewed at:	freebsd-jail@
2012-08-19 08:15:32 +00:00
Kevin Lo
1424b561e1 Whitespace nit 2012-07-13 06:46:09 +00:00
Hiroki Sato
8efbd296e0 Make ipfw0 logging pseudo-interface clonable. It can be created automatically
by $firewall_logif rc.conf(5) variable at boot time or manually by ifconfig(8)
after a boot.

Discussed on:	freebsd-ipfw@
2012-07-09 07:16:19 +00:00
Eitan Adler
d81a84a9bc Don't attempt to delete .sujournal in /tmp
PR:		conf/163828
Submitted by:	Tatsuki Makino <tatsuki_makino@hotmail.com>
Approved by:	cperciva
MFC after:	1 week
2012-05-30 03:51:46 +00:00
Stanislav Sedov
51506f39f4 - Change kfd rc script to be more conformant with rcNG conventions:
o change rcname to kfd;
  o move mandatory options to command_args;
  o add missing "shutdown" keyword;
  o fix require line.  Kfd doesn't really need to be started before
    daemons.

Suggested by:	dougb
2012-05-06 20:46:04 +00:00
Stanislav Sedov
7e2d4dcd24 - Add rc.d script for kfd, kerberos forwarded tickets daemon. 2012-04-10 09:27:41 +00:00
Martin Matuska
9f6e964d17 Unhide /dev/zfs in devfsrules_jail.
The /dev/zfs device is required for managing jailed ZFS datasets.

Discussed with:	pjd, jamie
MFC after:	1 week
2012-03-16 21:30:26 +00:00
Doug Barton
81ed1a1e1b Increase the default shutdown timer to 90 seconds. This will allow
certain systems that take a long time to shut down, without adversely
affecting things that shut down quickly. It's also 30 seconds less than
the default hard limit of 120 seconds in kern.init_shutdown_timeout.

PR:		conf/109272
Submitted by:	Radim Kolar SF.NET <hsn@sendmail.cz>
2012-02-17 07:59:37 +00:00
Doug Barton
20ceedfb69 Fix various issues with the NFS and RPC related scripts:
1. Add new functionality to the force_depend method to incorporate the
   tests for whether the service is enabled and/or already running.
2. Add a new option to bypass checking only that the service is enabled
   at boot time, and always check if it is running.
3. Use this new functionality to greatly simplify the rc.d scripts that
   use force_depend.
4. Add a force_depend for statd in lockd
5. Remove the check that either nfs_server or nfs_client is _enable'd
   from statd and lockd. This was always overkill, and prevented using
   the {one|force}start options, as well as stop'ing on the command line.
6. The yp* scripts had some of their arguments in various weird orders.
   Bring them into line with the model.
7. If mountd fails to create /var/db/mountdtab, err out.

Ideas, suggestions, and/or review from delphij and jilles.
Pointy hats are completely my responsibility however.
2012-02-14 10:51:24 +00:00
Doug Barton
95208e20d0 As it stands right now, the default devfs rulesets are only loaded as a
side effect of something else using them. If they haven't been loaded
already but you want to use them, say for configuring a jail, you're out
of luck.

So add a knob to always load the default rulesets. While I'm here document
the other devfs_ knobs in rc.conf.5.
2012-02-08 08:52:40 +00:00
Glen Barber
2f1602a7d1 Add an option to 404.status-zfs (enabled by default) to list all
zfs pools on the system.

While here, document daily_status_zfs_enable in periodic.conf(5).

Discussed on:	-fs [1]
Reviewed by:	netchild [1]
Approved by:	jhb
MFC after:	1 week

[1] - http://lists.freebsd.org/pipermail/freebsd-fs/2011-June/011869.html
2012-02-08 00:08:21 +00:00
Xin LI
8017fd8eb9 Increase default scrub threshold from 30 days to 5 weeks. Using
whole weeks makes it easier to predicate when the scrub would
happen.

MFC after:	1 week
2011-10-27 21:25:41 +00:00
Martin Matuska
dbedf61ce3 Add etc/rc.d/static_ndp, analogous to etc/rc.d/static_arp.
Make sure that static ARP and NDP bindings are set before NETWORKING.

As static_ndp is based on static_arp, pass copyright to the project with
permission of the original author (delphij@).

Reviewed by:	delphij@FreeBSD.org
MFC after:	3 days
2011-10-23 09:08:42 +00:00
Stefan Eßer
8d68b75b54 Add missing default values for daily/800.scrub-zfs for documentation
purposes. No functional change, since all parameters are set to their
default values.
MFC after:	1 week
2011-10-17 14:37:24 +00:00
Jaakko Heinonen
3fb4fa3574 Expose "log" in the default devfs rules. /etc/rc.d/jail creates /dev/log
as a symbolic link.

PR:		conf/160711
Submitted by:	Jase Thew
Approved by:	re (kib)
MFC after:	1 week
2011-09-15 13:32:43 +00:00
Doug Barton
073d48133f Correct the RFC number for the description of IPv6 privacy addressing
Reviewed by:	bz
Approved by:	re (kib)
2011-09-15 09:22:49 +00:00
Hiroki Sato
049087a0f3 Add $ipv6_cpe_wanif to enable functionality required for IPv6 CPE
(r225485).  When setting an interface name to it, the following
configurations will be enabled:

 1. "no_radr" is set to all IPv6 interfaces automatically.

 2. "-no_radr accept_rtadv" will be set only for $ipv6_cpe_wanif.  This is
    done just before evaluating $ifconfig_IF_ipv6 in the rc.d scripts (this
    means you can manually supersede this configuration if necessary).

 3. The node will add RA-sending routers to the default router list
    even if net.inet6.ip6.forwarding=1.

This mode is added to conform to RFC 6204 (a router which connects
the end-user network to a service provider network).  To enable
packet forwarding, you still need to set ipv6_gateway_enable=YES.

Note that accepting router entries into the default router list when
packet forwarding capability and a routing daemon are enabled can
result in messing up the routing table.  To minimize such unexpected
behaviors, "no_radr" is set on all interfaces but $ipv6_cpe_wanif.

Approved by:	re (bz)
2011-09-13 00:06:11 +00:00
Hans Petter Selasky
72b92b5ef7 - Move bus_auto.conf back into /etc/devd/
- Rename bus_auto.conf into usb.conf

Requested by:	imp @
MFC after:	14 days
2011-06-25 17:01:46 +00:00
Hans Petter Selasky
fe38e11f25 - Move auto-load devd config file into etc/defaults folder.
- Regenerate file after bugfix in the generator.

Suggested by:	Jeremy Messenger
MFC after:	14 days
2011-06-25 15:42:33 +00:00
Doug Barton
d732b516ea Add the netwait rc.d script. It waits for the specified period for the
network to become active.

PR:		conf/151063
Submitted by:	Jeremy Chadwick <freebsd@jdc.parodius.com>
2011-06-19 22:48:40 +00:00
Doug Barton
aff92fcbb9 Add rc.d/kld to load kernel modules after local disks are up.
This method is many times faster than doing it in /boot/loader.conf.
2011-06-18 19:41:05 +00:00
Rick Macklem
34eb31ca42 Make three one line changes to the rc scripts so that
they work with the new NFS client being the default,
since the new NFS client's module name is nfscl and
not nfsclient.
2011-06-11 21:14:22 +00:00
Bjoern A. Zeeb
1dd53eaea3 No logner set an IPv4 loopback address by default in defaults/rc.conf.
If not specified, network.subr will add it automatically if we have
INET support (1).

In network.subr only call the address family up/down functions
if the respective AF is available.

Switch to new kern.features variables for inet and inet6 as the
inet sysctl tree is also available for IPv6-only kernels leading
to unexpected results.

Suggested by:	hrs (1)
Reviewed by:	hrs
Sponsored by:	The FreeBSD Foundation
Sponsored by:	iXsystems
MFC after:	20 days
2011-05-31 00:25:52 +00:00
Rick Macklem
6bb544780b Update the /etc/rc.d scripts for mountd and nfsd so they
can use the "-o" option to force the old NFS server to run.
Running the old NFS server is enabled by setting
oldnfs_server_enable="YES". The scripts will only enable
providing service for NFSv4 if nfsv4_server_enable="YES"
is set.

Reviewed by:	dougb (rc)
2011-04-26 00:22:17 +00:00
Doug Barton
8028832653 Introduce to rc.subr get_pidfile_from_conf(). It does just what it sounds
like, determines the path to a pid file as it is specified in a conf file.

Use the new feature for rc.d/named and rc.d/devd, the 2 services in the
base that list their pid files in their conf files.

Remove the now-obsolete named_pidfile, and warn users if they have it set.
2011-04-23 04:26:31 +00:00
Doug Barton
22933fac2f Add a daily period script to back up /var/db/pkg
The final product contains work from the originator, and
Florent Thoumie <florent.thoumie@gmail.com>. The final
product contains considerable re-working by me, so all
responsibility for bugs rests under my pointy hat.

PR:		ports/145957
Submitted by:	Eitan Adler <EitanAdlerList@gmail.com>
2011-03-26 03:01:48 +00:00
Jeff Roberson
aa0a1e58f0 - Merge in OFED 1.5.3 from projects/ofed/head 2011-03-21 09:58:24 +00:00
Brooks Davis
95d068b14b Enable the check for negative permissions (the group on a file can't do
something "everyone" can) by default.

X-MFC after:	never
2011-02-24 23:51:59 +00:00
Jaakko Heinonen
1fdd33fd31 Replace nfs4 with newnfs in netfs_types. nfs4 was removed in r192578 and
mount(8) has supported newnfs since r192930.

PR:		conf/153655
Submitted by:	Anonymous <swell.k@gmail.com>
MFC after:	3 weeks
2011-01-09 09:21:11 +00:00
Pawel Jakub Dawidek
24b7ca3412 Add gptboot_enable rc variable, which allows to turn gptboot reporting off in
case user wants to implement his own actions and doesn't want the attributes to
vanish.

Obtained from:	Wheel Systems Sp. z o.o. http://www.wheelsystems.com
MFC after:	3 days
2010-11-24 15:25:17 +00:00
Brooks Davis
7cdc1c0007 Add an (off by default) check for negative permissions (where the
group on a object has less permissions that everyone).  These
permissions will not work reliably over NFS if you have more than
14 supplemental groups and are usually not what you mean.

MFC after:	1 week
2010-11-13 00:40:43 +00:00
Ed Maste
17332126d1 Commit the rest of r213270.
Thanks to Anonymous <swell dot k at gmail.com> for spotting this.
2010-09-29 22:59:49 +00:00
Hiroki Sato
d3a8a8b9fa Split $ipv6_prefer into $ip6addrctl_policy and $ipv6_activate_all_interfaces.
The $ip6addrctl_policy is a variable to choose a pre-defined address
selection policy set by ip6addrctl(8).
The keyword "ipv4_prefer" sets IPv4-preferred one described in Section 10.3,
the keyword "ipv6_prefer" sets IPv6-preferred one in Section 2.1 in RFC 3484,
respectively.  When "AUTO" is specified, it attempts to read
/etc/ip6addrctl.conf first.  If it is found, it reads and installs it as
a policy table.  If not, either of the two pre-defined policy tables is
chosen automatically according to $ipv6_activate_all_interfaces.

When $ipv6_activate_all_interfaces=NO, interfaces which have no corresponding
$ifconfig_IF_ipv6 is marked as IFDISABLED for security reason.

The default values are ip6addrctl_policy=AUTO and
ipv6_activate_all_interfaces=NO.

Discussed with:	ume and bz
2010-09-13 19:55:40 +00:00
Hiroki Sato
abe3ac576a Add $ipv6_privacy to support net.inet6.ip6.use_tempaddr. Note that this
will be replaced with a per-IF version later.

Based on:	changes in r206408 by dougb
2010-09-13 19:52:46 +00:00
Hiroki Sato
e5481092bb Fix $ipv6_network_interfaces and set it as AUTO by default.
Based on:	changes in r206408 by dougb
2010-09-13 19:52:04 +00:00
Hiroki Sato
c5ad71aff5 Revert changes in r206408.
Discussed with:	dougb, core.5, and core.6
2010-09-13 19:51:15 +00:00
Maxim Konovalov
e62f433662 o Correct typo.
Submitted by:	Bojidara Marinchovska via -stable
MFC after:	1 week
2010-08-25 08:37:18 +00:00
Oliver Fromme
6ece019fcf Add a daily script to the periodic framework that reports
changes to the package database, i.e. any packages that
have been added, updated or deleted in the past 24 hours.
The format is intentionally simple and concise.

That information is particularly useful on servers that
are maintained by multiple administrators.  When someone
adds, updates or deletes a package, the others will see
it in the daily periodic output.

This script is disabled by default.

PR:		conf/113913
Submitted by:	olli
Approved by:	des (mentor)
MFC after:	3 weeks
2010-08-05 15:53:33 +00:00
Gabor Kovesdan
d8456aa881 - Add a periodic script, which can be used to find installed ports' files with
mismatched checksum

PR:		conf/124641
Submitted by:	Alex Kozlov <spam@rm-rf.kiev.ua>
Approved by:	delphij (mentor)
2010-07-19 20:19:14 +00:00
Doug Barton
2557f5bf0a Remove trailing white space. No functional changes. 2010-05-14 04:53:57 +00:00
Hajimu UMEMOTO
b13cc627c7 Better handling of ipv6_default_interface using
net.inet6.ip6.use_defaultzone=1.  Now, it works IPv6 link-local
unicast addresses as well as IPv6 link-local multicast addresses.

MFC after:	1 week
2010-04-26 15:31:58 +00:00
Rui Paulo
9eb448a7e6 Use ubthidhci_enable="NO" to avoid the bootup warning.
Submitted by: 	Jilles Tjoelker <jilles@stack.nl>
MFC after:	3 days
2010-04-17 21:31:42 +00:00
Doug Barton
1a58736816 In case a user wants to configure only an IPv6 link-local address
add an example that shows how to do it.
2010-04-17 18:48:18 +00:00