Commit Graph

483 Commits

Author SHA1 Message Date
Yoshihiro Takahashi
6601e641fd Sync with sys/i386/conf/GENERIC revisions 1.258 and 1.259. 2000-07-04 12:31:46 +00:00
KATO Takenori
1753374bc6 Disabled ida, amr and mlx devices. 2000-06-28 03:25:47 +00:00
KATO Takenori
8ff264ff5b Merged from sys/i386/conf/GENERIC revisions 1.261 and 1.262. 2000-06-28 03:15:27 +00:00
Peter Wemm
1bce768912 Report the line number where gethints.pl does not understand something
in an old device line.
2000-06-26 09:08:23 +00:00
KATO Takenori
16a3f31561 Oops! Disabled the ed driver becasue it cannot be compiled.
Pointed out by:	nyan
2000-06-23 13:51:52 +00:00
KATO Takenori
926eda94b9 PC-98 version of ed driver is a statically limited driver.
Pointed out by:	haro@tk.kubota.co.jp (Munehiro Matsuda)
2000-06-21 14:54:19 +00:00
Peter Wemm
c46d792d58 Deal with quoted arguments. This hack parser uses whitespace to delimit
fields, not lex/yacc grammar so it is not an exact match but should be
close enough for most cases.
Deal with 'port?', 'irq?' style specifications.  These are parsed as
seperate values in lex/yacc in config(8) but tripped up this helper tool.
2000-06-17 20:10:55 +00:00
Peter Wemm
7ebe1c3acf Use while (<>) instead of while(<STDIN>) so that perl will automagically
deal with filename arguments.  It is amazing how much you forget over time.

Thanks to the people that reminded me this.  I knew there was an easy way
that didn't involve messing with $argv, filehandles, etc, but just could
not remember - all of my books are on the opposite side of the planet..
2000-06-17 19:06:13 +00:00
Yoshihiro Takahashi
c04eccbd1e - Moved "hint" informations to GENERIC.hints.
- Cosmetic changes.
2000-06-17 14:46:20 +00:00
KATO Takenori
869f0b9b22 bs, olpt, pckbd are static limited devices. 2000-06-17 03:58:06 +00:00
Peter Wemm
2c7c3a91e9 Print error messages to stderr, not stdout. 2000-06-14 02:45:11 +00:00
Peter Wemm
f71c01cc52 Borrow phk's axe and apply the next stage of config(8)'s evolution.
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.

config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel.  You can reconfigure your
isa devices with the likes of this at loader(8) time:
  set hint.ed.0.port=0x320

userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.

It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8).  See the "hints" directive in GENERIC
as an example.

All device wiring has been moved out of config(8).  There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file.  If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you.  You can also compile in the
hints directly with:  hints "device.hints"  as well.

There are a few things that I'm not too happy with yet.  Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it.  However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built.  A stack of man4 pages will need updating. :-/

Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated.  eg:  'device fe 4' will compile the fe driver with NFE set
to 4.  You can then set hints for 4 units (0 - 3).  Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this.  This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.

Please exercise EXTREME CAUTION when transitioning!

Moral support by: phk, msmith, dfr, asmodai, imp, and others
2000-06-13 22:28:50 +00:00
Yoshihiro Takahashi
0a67fdf343 Removed ICMP_BANDLIM option. It no longer exists. 2000-05-31 10:49:19 +00:00
Yoshihiro Takahashi
3ec91ea962 Sync with sys/i386/conf/GENERIC revisions from 1.246 to 1.256. 2000-05-19 16:36:42 +00:00
Yoshihiro Takahashi
7c14268dbd Supported the mss on PC-98 and Sound Blaster 98.
Submitted by:	"T.Yamaoka" <taka@windows.squares.net>
2000-05-19 15:41:52 +00:00
Yoshihiro Takahashi
987887c000 GENERIC98 -> GENERIC 2000-05-05 08:03:31 +00:00
KATO Takenori
c3a6416c86 Rename GENERIC98 to GENERIC. 2000-05-04 04:58:30 +00:00
Yoshihiro Takahashi
b81eb9cfd6 Sync with sys/i386/conf/GENERIC revision 1.252. 2000-04-23 09:04:42 +00:00
Yoshihiro Takahashi
239fe111cd - Added PC-98 Cbus frontend.
- Move dev/aic/aic_isa.c entry from conf/files to conf/files.MACHINE
   because PC-98 uses different file.

Submitted by:	nyan and IMAI Takeshi <take-i@ceres.dti.ne.jp>
2000-03-29 14:32:34 +00:00
KATO Takenori
af5d822f28 Commented out apm0. It could cause hang-up. 2000-03-29 13:39:15 +00:00
Yoshihiro Takahashi
9d97e36cc4 Added the joy driver (commented out).
Submitted by:	chi@bd.mbn.or.jp (Chiharu Shibata)
2000-03-22 03:19:37 +00:00
KATO Takenori
9b8b69aae4 Added COMPAT_OLDPCI and COMPAT_OLDISA options. 2000-03-19 14:42:52 +00:00
Yoshihiro Takahashi
54bfac8fdc Backed out ppc0 flags addtion. It isn't necessary without PPC_PROBE_CHIPSET
option.

Pointed out by:	peter
2000-03-17 11:37:03 +00:00
Yoshihiro Takahashi
13b6f8f604 Added 'flags 0x40' to ppc0. 2000-03-16 12:03:36 +00:00
Yoshihiro Takahashi
1a9a318055 Changed sio1 flags to 0x12000010 to enable serial console.
Submitted by:   IMAI Takeshi <take-i@ceres.dti.ne.jp>
2000-03-16 11:53:16 +00:00
KATO Takenori
9c675e3c19 Merged from sys/i386/conf/GENERIC revisions 1.243, 1.244 and 1.245. 2000-03-01 08:52:28 +00:00
KATO Takenori
48ca6b1019 Synced with sys/i386/conf/GENERIC revision 1.241.
Approved by:	jkh
2000-02-05 00:43:04 +00:00
KATO Takenori
3c21e97804 Synced with sys/i386/conf/GENERIC rev 1.240.
Approved by:	jkh
2000-02-03 10:46:28 +00:00
Peter Wemm
68b538c712 Remove 'conflicts' token - it has been effectively doing absolutely
nothing for quite some time.  The only thing that cared was userconfig,
but it was for one invisible device so we never saw it's effects.
2000-01-29 18:07:07 +00:00
KATO Takenori
930ba557d5 Merged with sys/i386/conf/GENERIC rev 1.238. 2000-01-28 07:15:23 +00:00
Yoshihiro Takahashi
78bd1e8a57 Merge from sys/i386/conf/GENERIC revision 1.231, 1.232 and 1.235. 2000-01-28 01:07:48 +00:00
KATO Takenori
fa7f776c1a Merged from sys/i386/conf/GENERIC rev 1.236. 2000-01-24 14:02:34 +00:00
Peter Wemm
d0cde06dd3 Remove some no-op "port ?" and "irq ?" declarations. 2000-01-24 08:52:29 +00:00
Peter Wemm
3fc005f656 Drop 'at ppbus?' and trailing '0' from ppbus children. 2000-01-23 14:47:58 +00:00
Peter Wemm
ea46992cd9 Remove useless trailing digit from pci and other unwired devices. 2000-01-23 12:20:09 +00:00
Yoshihiro Takahashi
450a74c2bb - Merge from sys/i386/conf/GENERIC rev 1.224, 1.225 and 1.226.
- Reorder network interfaces.
2000-01-21 13:22:07 +00:00
Yoshihiro Takahashi
3f681c0c41 Fixed typo. 2000-01-20 12:37:06 +00:00
KATO Takenori
c818f7b9de Synced with sys/i386/conf/GENERIC rev 1.230. 2000-01-20 08:34:40 +00:00
KATO Takenori
85a13e4332 Synced with sys/i386/conf/GENERIC rev 1.228. 2000-01-14 13:05:33 +00:00
Peter Wemm
d2b1bc7312 Put on my asbestos suit and move $mach/conf/*.$mach to conf/*.$mach as
hinted at in the previous config(8) commits.  I've spoken about this with
a few people and after the initial suprise wore off they thought it wasn't
a bad idea.  The upshot of it is that all the files*, Makefile*, options*
files are all right next to each other in the hope that people making
changes to one set will remember the others.

Note, config(8) looks to sys/conf first, and falls back to sys/$mach/conf
still, so this doesn't stop people working in subdirs for new platforms.
But once it's in the tree it can be moved next to the other files so that
the non-i386 platforms are (hopefully) treated a little better than as if
they were "second class" ports.

This does not change any user editable files.  the config program is
still run in the same directory as before, the per-platform files
(GENERIC, LINT etc) are still in the same place.
2000-01-09 15:29:10 +00:00
KATO Takenori
218b3dbece Synced with sys/i386/conf/files.i386 rev 1.295. 2000-01-09 14:25:50 +00:00
KATO Takenori
a7dcfbda20 Synced with sys/i386/conf/Makefile.i386 rev 1.176. 2000-01-09 14:24:00 +00:00
Bruce Evans
4100386cb1 Put COMPAT_SVR4 in opt_dontuse.h for the same reasons as IBCS2 and
COMPAT_LINUX are there.  It shouldn't be and isn't used after config
time, except to complicate the svr4 module makefile.

Moved options for emulators to a separate section.
2000-01-09 10:58:39 +00:00
Peter Wemm
58fa7951a2 Bump configversion. The controller/device changes are upwards but not
downwards compatable.  If you try and config a s/controller/device/ kernel
with an old config(8), the results will be less than satisfactory.
2000-01-09 07:10:27 +00:00
Peter Wemm
537cf769ab s/controller/device/ as per config(8) changes 2000-01-08 16:07:11 +00:00
Bruce Evans
c453bba744 Compile genassym.c with ordinary ${CFLAGS}. The (small) needs for
${GEN_CFLAGS} and -U_KERNEL became negative when all all the
genassym.c's were converted to be cross-built.

Makefile.*:
- Cleanups associated with the old genassym.
- Fixed deprecated spelling of ${.IMPSRC} as "$<".
2000-01-08 15:52:22 +00:00
Marcel Moolenaar
3abe5082ad Use genassym(1). The definitions of NKPDE and NKPT have been removed
because they are already defined in pmap.h, resulting in duplicate
definitions.

Reviewed by: bde
2000-01-07 11:50:46 +00:00
KATO Takenori
f030ad5fda Synced with sys/i386/conf/GENERIC rev 1.222. 2000-01-05 12:33:10 +00:00
Bill Paul
dfd1e98eac Add device driver support for USB ethernet adapters based on the
Kawasaki LSI KL5KUSB101B chip, including the LinkSys USB10T, the
Entrega NET-USB-E45, the Peracom USB Ethernet Adapter, the 3Com
3c19250 and the ADS Technologies USB-10BT. This device is 10mbs
half-duplex only, so there's miibus or ifmedia support. This device
also requires firmware to be loaded into it, however KLSI allows
redistribution of the firmware images (I specifically asked about
this; they said it was ok).

Special thanks to Annelise Anderson for getting me in touch with
KLSI (eventually) and thanks to KLSI for providing the necessary
programming info.

Highlights:
- Add driver files to /sys/dev/usb
- update usbdevs and regenerate attendate files
- update usb_quirks.c
- Update HARDWARE.TXT and RELNOTES.TXT for i386 and alpha
- Update LINT, GENERIC and others for i386, alpha and pc98
- Add man page
- Add module
- Update sysinstall and userconfig.c
2000-01-05 04:27:24 +00:00
Yoshihiro Takahashi
f8183ea817 - Add commented out USB driver entries.
- Reorder network interfaces.
2000-01-03 07:12:56 +00:00