that get certain types of control messages (ping6 and rtsol are
examples). This gets the new code closer to working:
1) Collect control mbufs for processing in the controlp ==
NULL case, so that they can be freed by externalize.
2) Loop over the list of control mbufs, as the externalize
function may not know how to deal with chains.
3) In the case where there is no externalize function,
remember to add the control mbuf to the controlp list so
that it will be returned.
4) After adding stuff to the controlp list, walk to the
end of the list of stuff that was added, incase we added
a chain.
This code can be further improved, but this is enough to get most
things working again.
Reviewed by: rwatson
a better name. I have a kern_[sg]etsockopt which I plan to commit
shortly, but the arguments to these function will be quite different
from so_setsockopt.
Approved by: alfred
in soreceive() after removing an MT_SONAME mbuf from the head of the
socket buffer.
When processing MT_CONTROL mbufs in soreceive(), first remove all of
the MT_CONTROL mbufs from the head of the socket buffer to a local
mbuf chain, then feed them into dom_externalize() as a set, which
both avoids thrashing the socket buffer lock when handling multiple
control mbufs, and also avoids races with other threads acting on
the socket buffer when the socket buffer mutex is released to enter
the externalize code. Existing races that might occur if the protocol
externalize method blocked during processing have also been closed.
Now that we synchronize socket buffer and stack state following
modifications to the socket buffer, turn the manual synchronization
that previously followed control mbuf processing with a set of
assertions. This can eventually be removed.
The soreceive() code is now substantially more MPSAFE.
the head of the mbuf chains in a socket buffer, re-synchronizes the
cache pointers used to optimize socket buffer appends. This will be
used by soreceive() before dropping socket buffer mutexes to make sure
a consistent version of the socket buffer is visible to other threads.
While here, update copyright to account for substantial rewrite of much
socket code required for fine-grained locking.
locking on 'nextrecord' and concerns regarding potentially inconsistent
or stale use of socket buffer or stack fields if they aren't carefully
synchronized whenever the socket buffer mutex is released. Document
that the high-level sblock() prevents races against other readers on
the socket.
Also document the 'type' logic as to how soreceive() guarantees that
it will only return one of normal data or inline out-of-band data.
associated with a PR_ADDR protocol, make sure to update the m_nextpkt
pointer of the new head mbuf on the chain to point to the next record.
Otherwise, when we release the socket buffer mutex, the socket buffer
mbuf chain may be in an inconsistent state.
so_gencnt, numopensockets, and the per-socket field so_gencnt. Annotate
this this might be better done with atomic operations.
Annotate what accept_mtx protects.
- sowakeup() now asserts the socket buffer lock on entry. Move
the call to KNOTE higher in sowakeup() so that it is made with
the socket buffer lock held for consistency with other calls.
Release the socket buffer lock prior to calling into pgsigio(),
so_upcall(), or aio_swake(). Locking for this event management
will need revisiting in the future, but this model avoids lock
order reversals when upcalls into other subsystems result in
socket/socket buffer operations. Assert that the socket buffer
lock is not held at the end of the function.
- Wrapper macros for sowakeup(), sorwakeup() and sowwakeup(), now
have _locked versions which assert the socket buffer lock on
entry. If a wakeup is required by sb_notify(), invoke
sowakeup(); otherwise, unconditionally release the socket buffer
lock. This results in the socket buffer lock being released
whether a wakeup is required or not.
- Break out socantsendmore() into socantsendmore_locked() that
asserts the socket buffer lock. socantsendmore()
unconditionally locks the socket buffer before calling
socantsendmore_locked(). Note that both functions return with
the socket buffer unlocked as socantsendmore_locked() calls
sowwakeup_locked() which has the same properties. Assert that
the socket buffer is unlocked on return.
- Break out socantrcvmore() into socantrcvmore_locked() that
asserts the socket buffer lock. socantrcvmore() unconditionally
locks the socket buffer before calling socantrcvmore_locked().
Note that both functions return with the socket buffer unlocked
as socantrcvmore_locked() calls sorwakeup_locked() which has
similar properties. Assert that the socket buffer is unlocked
on return.
- Break out sbrelease() into a sbrelease_locked() that asserts the
socket buffer lock. sbrelease() unconditionally locks the
socket buffer before calling sbrelease_locked().
sbrelease_locked() now invokes sbflush_locked() instead of
sbflush().
- Assert the socket buffer lock in socket buffer sanity check
functions sblastrecordchk(), sblastmbufchk().
- Assert the socket buffer lock in SBLINKRECORD().
- Break out various sbappend() functions into sbappend_locked()
(and variations on that name) that assert the socket buffer
lock. The !_locked() variations unconditionally lock the socket
buffer before calling their _locked counterparts. Internally,
make sure to call _locked() support routines, etc, if already
holding the socket buffer lock.
- Break out sbinsertoob() into sbinsertoob_locked() that asserts
the socket buffer lock. sbinsertoob() unconditionally locks the
socket buffer before calling sbinsertoob_locked().
- Break out sbflush() into sbflush_locked() that asserts the
socket buffer lock. sbflush() unconditionally locks the socket
buffer before calling sbflush_locked(). Update panic strings
for new function names.
- Break out sbdrop() into sbdrop_locked() that asserts the socket
buffer lock. sbdrop() unconditionally locks the socket buffer
before calling sbdrop_locked().
- Break out sbdroprecord() into sbdroprecord_locked() that asserts
the socket buffer lock. sbdroprecord() unconditionally locks
the socket buffer before calling sbdroprecord_locked().
- sofree() now calls socantsendmore_locked() and re-acquires the
socket buffer lock on return. It also now calls
sbrelease_locked().
- sorflush() now calls socantrcvmore_locked() and re-acquires the
socket buffer lock on return. Clean up/mess up other behavior
in sorflush() relating to the temporary stack copy of the socket
buffer used with dom_dispose by more properly initializing the
temporary copy, and selectively bzeroing/copying more carefully
to prevent WITNESS from getting confused by improperly
initialized mutexes. Annotate why that's necessary, or at
least, needed.
- soisconnected() now calls sbdrop_locked() before unlocking the
socket buffer to avoid locking overhead.
Some parts of this change were:
Submitted by: sam
Sponsored by: FreeBSD Foundation
Obtained from: BSD/OS
socket lock over pulling so_options and so_linger out of the socket
structure in order to retrieve a consistent snapshot. This may be
overkill if user space doesn't require a consistent snapshot.
resolved by socket locking: in particular, that we test the connection
state at the socket layer without locking, request that the protocol
begin listening, and then set the listen state on the socket
non-atomically, resulting in a non-atomic cross-layer test-and-set.
lock state. Convert tsleep() into msleep() with socket buffer mutex
as argument. Hold socket buffer lock over sbunlock() to protect sleep
lock state.
Assert socket buffer lock in sbwait() to protect the socket buffer
wait state. Convert tsleep() into msleep() with socket buffer mutex
as argument.
Modify sofree(), sosend(), and soreceive() to acquire SOCKBUF_LOCK()
in order to call into these functions with the lock, as well as to
start protecting other socket buffer use in their implementation. Drop
the socket buffer mutexes around calls into the protocol layer, around
potentially blocking operations, for copying to/from user space, and
VM operations relating to zero-copy. Assert the socket buffer mutex
strategically after code sections or at the beginning of loops. In
some cases, modify return code to ensure locks are properly dropped.
Convert the potentially blocking allocation of storage for the remote
address in soreceive() into a non-blocking allocation; we may wish to
move the allocation earlier so that it can block prior to acquisition
of the socket buffer lock.
Drop some spl use.
NOTE: Some races exist in the current structuring of sosend() and
soreceive(). This commit only merges basic socket locking in this
code; follow-up commits will close additional races. As merged,
these changes are not sufficient to run without Giant safely.
Reviewed by: juli, tjr
rwatson_netperf:
Introduce conditional locking of the socket buffer in fifofs kqueue
filters; KNOTE() will be called holding the socket buffer locks in
fifofs, but sometimes the kqueue() system call will poll using the
same entry point without holding the socket buffer lock.
Introduce conditional locking of the socket buffer in the socket
kqueue filters; KNOTE() will be called holding the socket buffer
locks in the socket code, but sometimes the kqueue() system call
will poll using the same entry points without holding the socket
buffer lock.
Simplify the logic in sodisconnect() since we no longer need spls.
NOTE: To remove conditional locking in the kqueue filters, it would
make sense to use a separate kqueue API entry into the socket/fifo
code when calling from the kqueue() system call.
- Lock down low hanging fruit use of sb_flags with socket buffer
lock.
- Lock down low hanging fruit use of so_state with socket lock.
- Lock down low hanging fruit use of so_options.
- Lock down low-hanging fruit use of sb_lowwat and sb_hiwat with
socket buffer lock.
- Annotate situations in which we unlock the socket lock and then
grab the receive socket buffer lock, which are currently actually
the same lock. Depending on how we want to play our cards, we
may want to coallesce these lock uses to reduce overhead.
- Convert a if()->panic() into a KASSERT relating to so_state in
soaccept().
- Remove a number of splnet()/splx() references.
More complex merging of socket and socket buffer locking to
follow.
flags relating to several aspects of socket functionality. This change
breaks out several bits relating to send and receive operation into a
new per-socket buffer field, sb_state, in order to facilitate locking.
This is required because, in order to provide more granular locking of
sockets, different state fields have different locking properties. The
following fields are moved to sb_state:
SS_CANTRCVMORE (so_state)
SS_CANTSENDMORE (so_state)
SS_RCVATMARK (so_state)
Rename respectively to:
SBS_CANTRCVMORE (so_rcv.sb_state)
SBS_CANTSENDMORE (so_snd.sb_state)
SBS_RCVATMARK (so_rcv.sb_state)
This facilitates locking by isolating fields to be located with other
identically locked fields, and permits greater granularity in socket
locking by avoiding storing fields with different locking semantics in
the same short (avoiding locking conflicts). In the future, we may
wish to coallesce sb_state and sb_flags; for the time being I leave
them separate and there is no additional memory overhead due to the
packing/alignment of shorts in the socket buffer structure.
reference count:
- Assert SOCK_LOCK(so) macros that directly manipulate so_count:
soref(), sorele().
- Assert SOCK_LOCK(so) in macros/functions that rely on the state of
so_count: sofree(), sotryfree().
- Acquire SOCK_LOCK(so) before calling these functions or macros in
various contexts in the stack, both at the socket and protocol
layers.
- In some cases, perform soisdisconnected() before sotryfree(), as
this could result in frobbing of a non-present socket if
sotryfree() actually frees the socket.
- Note that sofree()/sotryfree() will release the socket lock even if
they don't free the socket.
Submitted by: sam
Sponsored by: FreeBSD Foundation
Obtained from: BSD/OS
protect fields in the socket buffer. Add accessor macros to use the
mutex (SOCKBUF_*()). Initialize the mutex in soalloc(), and destroy
it in sodealloc(). Add addition, add SOCK_*() access macros which
will protect most remaining fields in the socket; for the time being,
use the receive socket buffer mutex to implement socket level locking
to reduce memory overhead.
Submitted by: sam
Sponosored by: FreeBSD Foundation
Obtained from: BSD/OS
global mutex, accept_mtx, which serializes access to the following
fields across all sockets:
so_qlen so_incqlen so_qstate
so_comp so_incomp so_list
so_head
While providing only coarse granularity, this approach avoids lock
order issues between sockets by avoiding ownership of the fields
by a specific socket and its per-socket mutexes.
While here, rewrite soclose(), sofree(), soaccept(), and
sonewconn() to add assertions, close additional races and address
lock order concerns. In particular:
- Reorganize the optimistic concurrency behavior in accept1() to
always allocate a file descriptor with falloc() so that if we do
find a socket, we don't have to encounter the "Oh, there wasn't
a socket" race that can occur if falloc() sleeps in the current
code, which broke inbound accept() ordering, not to mention
requiring backing out socket state changes in a way that raced
with the protocol level. We may want to add a lockless read of
the queue state if polling of empty queues proves to be important
to optimize.
- In accept1(), soref() the socket while holding the accept lock
so that the socket cannot be free'd in a race with the protocol
layer. Likewise in netgraph equivilents of the accept1() code.
- In sonewconn(), loop waiting for the queue to be small enough to
insert our new socket once we've committed to inserting it, or
races can occur that cause the incomplete socket queue to
overfill. In the previously implementation, it was sufficient
to simply tested once since calling soabort() didn't release
synchronization permitting another thread to insert a socket as
we discard a previous one.
- In soclose()/sofree()/et al, it is the responsibility of the
caller to remove a socket from the incomplete connection queue
before calling soabort(), which prevents soabort() from having
to walk into the accept socket to release the socket from its
queue, and avoids races when releasing the accept mutex to enter
soabort(), permitting soabort() to avoid lock ordering issues
with the caller.
- Generally cluster accept queue related operations together
throughout these functions in order to facilitate locking.
Annotate new locking in socketvar.h.
the socket is on an accept queue of a listen socket. This change
renames the flags to SQ_COMP and SQ_INCOMP, and moves them to a new
state field on the socket, so_qstate, as the locking for these flags
is substantially different for the locking on the remainder of the
flags in so_state.
them to behave the same as if the SS_NBIO socket flag had been set
for this call. The SS_NBIO flag for ordinary sockets is set by
fcntl(fd, F_SETFL, O_NONBLOCK).
Pass the MSG_NBIO flag to the soreceive() and sosend() calls in
fifo_read() and fifo_write() instead of frobbing the SS_NBIO flag
on the underlying socket for each I/O operation. The O_NONBLOCK
flag is a property of the descriptor, and unlike ordinary sockets,
fifos may be referenced by multiple descriptors.
mbuma is an Mbuf & Cluster allocator built on top of a number of
extensions to the UMA framework, all included herein.
Extensions to UMA worth noting:
- Better layering between slab <-> zone caches; introduce
Keg structure which splits off slab cache away from the
zone structure and allows multiple zones to be stacked
on top of a single Keg (single type of slab cache);
perhaps we should look into defining a subset API on
top of the Keg for special use by malloc(9),
for example.
- UMA_ZONE_REFCNT zones can now be added, and reference
counters automagically allocated for them within the end
of the associated slab structures. uma_find_refcnt()
does a kextract to fetch the slab struct reference from
the underlying page, and lookup the corresponding refcnt.
mbuma things worth noting:
- integrates mbuf & cluster allocations with extended UMA
and provides caches for commonly-allocated items; defines
several zones (two primary, one secondary) and two kegs.
- change up certain code paths that always used to do:
m_get() + m_clget() to instead just use m_getcl() and
try to take advantage of the newly defined secondary
Packet zone.
- netstat(1) and systat(1) quickly hacked up to do basic
stat reporting but additional stats work needs to be
done once some other details within UMA have been taken
care of and it becomes clearer to how stats will work
within the modified framework.
From the user perspective, one implication is that the
NMBCLUSTERS compile-time option is no longer used. The
maximum number of clusters is still capped off according
to maxusers, but it can be made unlimited by setting
the kern.ipc.nmbclusters boot-time tunable to zero.
Work should be done to write an appropriate sysctl
handler allowing dynamic tuning of kern.ipc.nmbclusters
at runtime.
Additional things worth noting/known issues (READ):
- One report of 'ips' (ServeRAID) driver acting really
slow in conjunction with mbuma. Need more data.
Latest report is that ips is equally sucking with
and without mbuma.
- Giant leak in NFS code sometimes occurs, can't
reproduce but currently analyzing; brueffer is
able to reproduce but THIS IS NOT an mbuma-specific
problem and currently occurs even WITHOUT mbuma.
- Issues in network locking: there is at least one
code path in the rip code where one or more locks
are acquired and we end up in m_prepend() with
M_WAITOK, which causes WITNESS to whine from within
UMA. Current temporary solution: force all UMA
allocations to be M_NOWAIT from within UMA for now
to avoid deadlocks unless WITNESS is defined and we
can determine with certainty that we're not holding
any locks when we're M_WAITOK.
- I've seen at least one weird socketbuffer empty-but-
mbuf-still-attached panic. I don't believe this
to be related to mbuma but please keep your eyes
open, turn on debugging, and capture crash dumps.
This change removes more code than it adds.
A paper is available detailing the change and considering
various performance issues, it was presented at BSDCan2004:
http://www.unixdaemons.com/~bmilekic/netbuf_bmilekic.pdf
Please read the paper for Future Work and implementation
details, as well as credits.
Testing and Debugging:
rwatson,
brueffer,
Ketrien I. Saihr-Kesenchedra,
...
Reviewed by: Lots of people (for different parts)
declaration. Observe that initialization in declaration is
frequently incompatible with locking, not just a bad idea
due to style(9).
Submitted by: bde
functions in kern_socket.c.
Rename the "canwait" field to "mflags" and pass M_WAITOK and M_NOWAIT
in from the caller context rather than "1" or "0".
Correct mflags pass into mac_init_socket() from previous commit to not
include M_ZERO.
Submitted by: sam
than a "waitok" argument. Callers now passing M_WAITOK or M_NOWAIT
rather than 0 or 1. This simplifies the soalloc() logic, and also
makes the waiting behavior of soalloc() more clear in the calling
context.
Submitted by: sam
at packet arrival.
For benchmarking purposes SO_BINTIME is preferable to SO_TIMEVAL
since it has higher resolution and lower overhead. Simultaneous
use of the two options is possible and they will return consistent
timestamps.
This introduces an extra test and a function call for SO_TIMEVAL, but I have
not been able to measure that.
sure to sooptcopyin() the (struct mac) so that the MAC Framework
knows which label types are being requested. This fixes process
queries of socket labels.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
thread being waken up. The thread waken up can run at a priority as
high as after tsleep().
- Replace selwakeup()s with selwakeuppri()s and pass appropriate
priorities.
- Add cv_broadcastpri() which raises the priority of the broadcast
threads. Used by selwakeuppri() if collision occurs.
Not objected in: -arch, -current
do not clear the `sb_sel' member of the sockbuf structure
while invalidating the receive sockbuf in sorflush(), called
from soshutdown().
The panic was reproduceable from user land by attaching a knote
with EVFILT_READ filters to a socket, disabling further reads
from it using shutdown(2), and then closing it. knote_remove()
was called to remove all knotes from the socket file descriptor
by detaching each using its associated filterops' detach call-
back function, sordetach() in this case, which tried to remove
itself from the invalidated sockbuf's klist (sb_sel.si_note).
PR: kern/54331
SS_ISCONNECTING state, returning EINVAL (which is what POSIX mandates
in this case).
listen() on connected or connecting sockets would cause them to enter
a bad state; in the TCP case, this could cause sockets to go
catatonic or panics, depending on how the socket was connected.
Reviewed by: -net
MFC after: 2 weeks
pointer types, and remove a huge number of casts from code using it.
Change struct xfile xf_data to xun_data (ABI is still compatible).
If we need to add a #define for f_data and xf_data we can, but I don't
think it will be necessary. There are no operational changes in this
commit.
then call do_setopt_accept_filter(so, NULL) which will free the filter
instead of duplicating the code in do_setopt_accept_filter().
Pointed out by: Hiten Pandya <hiten@angelica.unixdaemons.com>
the data value returned by kevent()'s EVFILT_READ filter on non-TCP
sockets accurately reflects the amount of data that can be read from the
sockets by applications.
PR: 30634
Reviewed by: -net, -arch
Sponsored by: NTT Multimedia Communications Labs
MFC after: 2 weeks
flags so that we can call malloc with M_NOWAIT if necessary, avoiding
potential sleeps while holding mutexes in the TCP syncache code.
Similar to the existing support for mbuf label allocation: if we can't
allocate all the necessary label store in each policy, we back out
the label allocation and fail the socket creation. Sync from MAC tree.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
fo_read() and fo_write(): explicitly use the cred argument to fo_poll()
as "active_cred" using the passed file descriptor's f_cred reference
to provide access to the file credential. Add an active_cred
argument to fo_stat() so that implementers have access to the active
credential as well as the file credential. Generally modify callers
of fo_stat() to pass in td->td_ucred rather than fp->f_cred, which
was redundantly provided via the fp argument. This set of modifications
also permits threads to perform these operations on behalf of another
thread without modifying their credential.
Trickle this change down into fo_stat/poll() implementations:
- badfo_poll(), badfo_stat(): modify/add arguments.
- kqueue_poll(), kqueue_stat(): modify arguments.
- pipe_poll(), pipe_stat(): modify/add arguments, pass active_cred to
MAC checks rather than td->td_ucred.
- soo_poll(), soo_stat(): modify/add arguments, pass fp->f_cred rather
than cred to pru_sopoll() to maintain current semantics.
- sopoll(): moidfy arguments.
- vn_poll(), vn_statfile(): modify/add arguments, pass new arguments
to vn_stat(). Pass active_cred to MAC and fp->f_cred to VOP_POLL()
to maintian current semantics.
- vn_close(): rename cred to file_cred to reflect reality while I'm here.
- vn_stat(): Add active_cred and file_cred arguments to vn_stat()
and consumers so that this distinction is maintained at the VFS
as well as 'struct file' layer. Pass active_cred instead of
td->td_ucred to MAC and to VOP_GETATTR() to maintain current semantics.
- fifofs: modify the creation of a "filetemp" so that the file
credential is properly initialized and can be used in the socket
code if desired. Pass ap->a_td->td_ucred as the active
credential to soo_poll(). If we teach the vnop interface about
the distinction between file and active credentials, we would use
the active credential here.
Note that current inconsistent passing of active_cred vs. file_cred to
VOP's is maintained. It's not clear why GETATTR would be authorized
using active_cred while POLL would be authorized using file_cred at
the file system level.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
the jail check and the MAC socket labeling in socreate(). This handles
socket creation using a cached credential better (such as in the NFS
client code when rebuilding a socket following a disconnect: the new
socket should be created using the nfsmount cached cred, not the cred
of the thread causing the socket to be rebuilt).
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
kernel access control.
Implement two IOCTLs at the socket level to retrieve the primary
and peer labels from a socket. Note that this user process interface
will be changing to improve multi-policy support.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
kernel access control.
Invoke the necessary MAC entry points to maintain labels on sockets.
In particular, invoke entry points during socket allocation and
destruction, as well as creation by a process or during an
accept-scenario (sonewconn). For UNIX domain sockets, also assign
a peer label. As the socket code isn't locked down yet, locking
interactions are not yet clear. Various protocol stack socket
operations (such as peer label assignment for IPv4) will follow.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
MAKEDEV: Add MAKEDEV glue for the ti(4) device nodes.
ti.4: Update the ti(4) man page to include information on the
TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options,
and also include information about the new character
device interface and the associated ioctls.
man9/Makefile: Add jumbo.9 and zero_copy.9 man pages and associated
links.
jumbo.9: New man page describing the jumbo buffer allocator
interface and operation.
zero_copy.9: New man page describing the general characteristics of
the zero copy send and receive code, and what an
application author should do to take advantage of the
zero copy functionality.
NOTES: Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS,
TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT.
conf/files: Add uipc_jumbo.c and uipc_cow.c.
conf/options: Add the 5 options mentioned above.
kern_subr.c: Receive side zero copy implementation. This takes
"disposable" pages attached to an mbuf, gives them to
a user process, and then recycles the user's page.
This is only active when ZERO_COPY_SOCKETS is turned on
and the kern.ipc.zero_copy.receive sysctl variable is
set to 1.
uipc_cow.c: Send side zero copy functions. Takes a page written
by the user and maps it copy on write and assigns it
kernel virtual address space. Removes copy on write
mapping once the buffer has been freed by the network
stack.
uipc_jumbo.c: Jumbo disposable page allocator code. This allocates
(optionally) disposable pages for network drivers that
want to give the user the option of doing zero copy
receive.
uipc_socket.c: Add kern.ipc.zero_copy.{send,receive} sysctls that are
enabled if ZERO_COPY_SOCKETS is turned on.
Add zero copy send support to sosend() -- pages get
mapped into the kernel instead of getting copied if
they meet size and alignment restrictions.
uipc_syscalls.c:Un-staticize some of the sf* functions so that they
can be used elsewhere. (uipc_cow.c)
if_media.c: In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid
calling malloc() with M_WAITOK. Return an error if
the M_NOWAIT malloc fails.
The ti(4) driver and the wi(4) driver, at least, call
this with a mutex held. This causes witness warnings
for 'ifconfig -a' with a wi(4) or ti(4) board in the
system. (I've only verified for ti(4)).
ip_output.c: Fragment large datagrams so that each segment contains
a multiple of PAGE_SIZE amount of data plus headers.
This allows the receiver to potentially do page
flipping on receives.
if_ti.c: Add zero copy receive support to the ti(4) driver. If
TI_PRIVATE_JUMBOS is not defined, it now uses the
jumbo(9) buffer allocator for jumbo receive buffers.
Add a new character device interface for the ti(4)
driver for the new debugging interface. This allows
(a patched version of) gdb to talk to the Tigon board
and debug the firmware. There are also a few additional
debugging ioctls available through this interface.
Add header splitting support to the ti(4) driver.
Tweak some of the default interrupt coalescing
parameters to more useful defaults.
Add hooks for supporting transmit flow control, but
leave it turned off with a comment describing why it
is turned off.
if_tireg.h: Change the firmware rev to 12.4.11, since we're really
at 12.4.11 plus fixes from 12.4.13.
Add defines needed for debugging.
Remove the ti_stats structure, it is now defined in
sys/tiio.h.
ti_fw.h: 12.4.11 firmware.
ti_fw2.h: 12.4.11 firmware, plus selected fixes from 12.4.13,
and my header splitting patches. Revision 12.4.13
doesn't handle 10/100 negotiation properly. (This
firmware is the same as what was in the tree previously,
with the addition of header splitting support.)
sys/jumbo.h: Jumbo buffer allocator interface.
sys/mbuf.h: Add a new external mbuf type, EXT_DISPOSABLE, to
indicate that the payload buffer can be thrown away /
flipped to a userland process.
socketvar.h: Add prototype for socow_setup.
tiio.h: ioctl interface to the character portion of the ti(4)
driver, plus associated structure/type definitions.
uio.h: Change prototype for uiomoveco() so that we'll know
whether the source page is disposable.
ufs_readwrite.c:Update for new prototype of uiomoveco().
vm_fault.c: In vm_fault(), check to see whether we need to do a page
based copy on write fault.
vm_object.c: Add a new function, vm_object_allocate_wait(). This
does the same thing that vm_object allocate does, except
that it gives the caller the opportunity to specify whether
it should wait on the uma_zalloc() of the object structre.
This allows vm objects to be allocated while holding a
mutex. (Without generating WITNESS warnings.)
vm_object_allocate() is implemented as a call to
vm_object_allocate_wait() with the malloc flag set to
M_WAITOK.
vm_object.h: Add prototype for vm_object_allocate_wait().
vm_page.c: Add page-based copy on write setup, clear and fault
routines.
vm_page.h: Add page based COW function prototypes and variable in
the vm_page structure.
Many thanks to Drew Gallatin, who wrote the zero copy send and receive
code, and to all the other folks who have tested and reviewed this code
over the years.
o Add a mutex (sb_mtx) to struct sockbuf. This protects the data in a
socket buffer. The mutex in the receive buffer also protects the data
in struct socket.
o Determine the lock strategy for each members in struct socket.
o Lock down the following members:
- so_count
- so_options
- so_linger
- so_state
o Remove *_locked() socket APIs. Make the following socket APIs
touching the members above now require a locked socket:
- sodisconnect()
- soisconnected()
- soisconnecting()
- soisdisconnected()
- soisdisconnecting()
- sofree()
- soref()
- sorele()
- sorwakeup()
- sotryfree()
- sowakeup()
- sowwakeup()
Reviewed by: alfred
be done internally.
Ensure that no one can fsetown() to a dying process/pgrp. We need
to check the process for P_WEXIT to see if it's exiting. Process
groups are already safe because there is no such thing as a pgrp
zombie, therefore the proctree lock completely protects the pgrp
from having sigio structures associated with it after it runs
funsetownlst.
Add sigio lock to witness list under proctree and allproc, but over
proc and pgrp.
Seigo Tanimura helped with this.
Turn the sigio sx into a mutex.
Sigio lock is really only needed to protect interrupts from dereferencing
the sigio pointer in an object when the sigio itself is being destroyed.
In order to do this in the most unintrusive manner change pgsigio's
sigio * argument into a **, that way we can lock internally to the
function.
LRU fashion when the listen queue fills up. Previously, there was
no mechanism to kick out old sockets, leading to an easy DoS of
daemons using accept filtering.
Reviewed by: alfred
MFC after: 3 days
the data was supplied as a uio or an mbuf. Previously the limit was
ignored for mbuf data, and NFS could run the kernel out of mbufs
when an ipfw rule blocked retransmissions.
Backout revision 1.56 and 1.57 of fifo_vnops.c.
Introduce a new poll op "POLLINIGNEOF" that can be used to ignore
EOF on a fifo, POLLIN/POLLRDNORM is converted to POLLINIGNEOF within
the FIFO implementation to effect the correct behavior.
This should allow one to view a fifo pretty much as a data source
rather than worry about connections coming and going.
Reviewed by: bde
socreate(), rather than getting it implicitly from the thread
argument.
o Make NFS cache the credential provided at mount-time, and use
the cached credential (nfsmount->nm_cred) when making calls to
socreate() on initially connecting, or reconnecting the socket.
This fixes bugs involving NFS over TCP and ipfw uid/gid rules, as well
as bugs involving NFS and mandatory access control implementations.
Reviewed by: freebsd-arch
vnodes. This will hopefully serve as a base from which we can
expand the MP code. We currently do not attempt to obtain any
mutex or SX locks, but the door is open to add them when we nail
down exactly how that part of it is going to work.
- crhold() returns a reference to the ucred whose refcount it bumps.
- crcopy() now simply copies the credentials from one credential to
another and has no return value.
- a new crshared() primitive is added which returns true if a ucred's
refcount is > 1 and false (0) otherwise.
a single kern.security.seeotheruids_permitted, describes as:
"Unprivileged processes may see subjects/objects with different real uid"
NOTE: kern.ps_showallprocs exists in -STABLE, and therefore there is
an API change. kern.ipc.showallsockets does not.
- Check kern.security.seeotheruids_permitted in cr_cansee().
- Replace visibility calls to socheckuid() with cr_cansee() (retain
the change to socheckuid() in ipfw, where it is used for rule-matching).
- Remove prison_unpcb() and make use of cr_cansee() against the UNIX
domain socket credential instead of comparing root vnodes for the
UDS and the process. This allows multiple jails to share the same
chroot() and not see each others UNIX domain sockets.
- Remove unused socheckproc().
Now that cr_cansee() is used universally for socket visibility, a variety
of policies are more consistently enforced, including uid-based
restrictions and jail-based restrictions. This also better-supports
the introduction of additional MAC models.
Reviewed by: ps, billf
Obtained from: TrustedBSD Project
kern.ipc.showallsockets is set to 0.
Submitted by: billf (with modifications by me)
Inspired by: Dave McKay (aka pm aka Packet Magnet)
Reviewed by: peter
MFC after: 2 weeks
1) Allow the sending of more than one control message at a time
over a unix domain socket. This should cover the PR 29499.
2) This requires that unp_{ex,in}ternalize and unp_scan understand
mbufs with more than one control message at a time.
3) Internalize and externalize used to work on the mbuf in-place.
This made life quite complicated and the code for sizeof(int) <
sizeof(file *) could end up doing the wrong thing. The patch always
create a new mbuf/cluster now. This resulted in the change of the
prototype for the domain externalise function.
4) You can now send SCM_TIMESTAMP messages.
5) Always use CMSG_DATA(cm) to determine the start where the data
in unp_{ex,in}ternalize. It was using ((struct cmsghdr *)cm + 1)
in some places, which gives the wrong alignment on the alpha.
(NetBSD made this fix some time ago).
This results in an ABI change for discriptor passing and creds
passing on the alpha. (Probably on the IA64 and Spare ports too).
6) Fix userland programs to use CMSG_* macros too.
7) Be more careful about freeing mbufs containing (file *)s.
This is made possible by the prototype change of externalise.
PR: 29499
MFC after: 6 weeks
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
other "system" header files.
Also help the deprecation of lockmgr.h by making it a sub-include of
sys/lock.h and removing sys/lockmgr.h form kernel .c files.
Sort sys/*.h includes where possible in affected files.
OK'ed by: bde (with reservations)
the socket buffer size, the receive is done in sections. After completing
a read, call pru_rcvd on the underlying protocol before blocking again.
This allows the the protocol to take appropriate action, such as
sending a TCP window update to the peer, if the window happened to
close because the socket buffer was filled. If the protocol is not
notified, a TCP transfer may stall until the remote end sends a window
probe.
allow the watermark to be passed in via the data field during the EV_ADD
operation.
Hook this up to the socket read/write filters; if specified, it overrides
the so_{rcv|snd}.sb_lowat values in the filter.
Inspired by: "Ronald F. Guilmette" <rfg@monkeys.com>
the current socket error in fflags. This may be useful for determining
why a connect() request fails.
Inspired by: "Jonathan Graehl" <jonathan@graehl.org>
credential structure, ucred (cr->cr_prison).
o Allow jail inheritence to be a function of credential inheritence.
o Abstract prison structure reference counting behind pr_hold() and
pr_free(), invoked by the similarly named credential reference
management functions, removing this code from per-ABI fork/exit code.
o Modify various jail() functions to use struct ucred arguments instead
of struct proc arguments.
o Introduce jailed() function to determine if a credential is jailed,
rather than directly checking pointers all over the place.
o Convert PRISON_CHECK() macro to prison_check() function.
o Move jail() function prototypes to jail.h.
o Emulate the P_JAILED flag in fill_kinfo_proc() and no longer set the
flag in the process flags field itself.
o Eliminate that "const" qualifier from suser/p_can/etc to reflect
mutex use.
Notes:
o Some further cleanup of the linux/jail code is still required.
o It's now possible to consider resolving some of the process vs
credential based permission checking confusion in the socket code.
o Mutex protection of struct prison is still not present, and is
required to protect the reference count plus some fields in the
structure.
Reviewed by: freebsd-arch
Obtained from: TrustedBSD Project
This is because calls with M_WAIT (now M_TRYWAIT) may not wait
forever when nothing is available for allocation, and may end up
returning NULL. Hopefully we now communicate more of the right thing
to developers and make it very clear that it's necessary to check whether
calls with M_(TRY)WAIT also resulted in a failed allocation.
M_TRYWAIT basically means "try harder, block if necessary, but don't
necessarily wait forever." The time spent blocking is tunable with
the kern.ipc.mbuf_wait sysctl.
M_WAIT is now deprecated but still defined for the next little while.
* Fix a typo in a comment in mbuf.h
* Fix some code that was actually passing the mbuf subsystem's M_WAIT to
malloc(). Made it pass M_WAITOK instead. If we were ever to redefine the
value of the M_WAIT flag, this could have became a big problem.
chgsbsize(), which are called rather frequently and may be called from an
interrupt context in the case of chgsbsize(). Instead, do the hash table
lookup and maintenance when credentials are changed, which is a lot less
frequent. Add pointers to the uidinfo structures to the ucred and pcred
structures for fast access. Pass a pointer to the credential to chgproccnt()
and chgsbsize() instead of passing the uid. Add a reference count to the
uidinfo structure and use it to decide when to free the structure rather
than freeing the structure when the resource consumption drops to zero.
Move the resource tracking code from kern_proc.c to kern_resource.c. Move
some duplicate code sequences in kern_prot.c to separate helper functions.
Change KASSERTs in this code to unconditional tests and calls to panic().
the chgsbsize() call to use a "subject" pointer (&sb.sb_hiwat) and
a u_long target to set it to. The whole thing is splnet().
This fixes a problem that jdp has been able to provoke.
1) while allocating a uidinfo struct malloc is called with M_WAITOK,
it's possible that while asleep another process by the same user
could have woken up earlier and inserted an entry into the uid
hash table. Having redundant entries causes inconsistancies that
we can't handle.
fix: do a non-waiting malloc, and if that fails then do a blocking
malloc, after waking up check that no one else has inserted an entry
for us already.
2) Because many checks for sbsize were done as "test then set" in a non
atomic manner it was possible to exceed the limits put up via races.
fix: instead of querying the count then setting, we just attempt to
set the count and leave it up to the function to return success or
failure.
3) The uidinfo code was inlining and repeating, lookups and insertions
and deletions needed to be in their own functions for clarity.
Reviewed by: green
accept filters are now loadable as well as able to be compiled into
the kernel.
two accept filters are provided, one that returns sockets when data
arrives the other when an http request is completed (doesn't work
with 0.9 requests)
Reviewed by: jmg
until the incoming connection has either data waiting or what looks like a
HTTP request header already in the socketbuffer. This ought to reduce
the context switch time and overhead for processing requests.
The initial idea and code for HTTPACCEPT came from Yahoo engineers and has
been cleaned up and a more lightweight DELAYACCEPT for non-http servers
has been added
Reviewed by: silence on hackers.
TCP/IP (v4) sockets, and routing sockets. Previously, interaction
with IPv6 was not well-defined, and might be inappropriate for some
environments. Similarly, sysctl MIB entries providing interface
information also give out only addresses from those protocol domains.
For the time being, this functionality is enabled by default, and
toggleable using the sysctl variable jail.socket_unixiproute_only.
In the future, protocol domains will be able to determine whether or
not they are ``jail aware''.
o Further limitations on process use of getpriority() and setpriority()
by jailed processes. Addresses problem described in kern/17878.
Reviewed by: phk, jmg
Make gratuitous style(9) fixes (me, not the submitter) to make the aio
code more readable.
PR: kern/12053
Submitted by: Chris Sedore <cmsedore@maxwell.syr.edu>
means that running out of mbuf space isn't a panic anymore, and code
which runs out of network memory will sleep to wait for it.
Submitted by: Bosko Milekic <bmilekic@dsuper.net>
Reviewed by: green, wollman
for IPv6 yet)
With this patch, you can assigne IPv6 addr automatically, and can reply to
IPv6 ping.
Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
Alot of the code in sys/kern directly accesses the *Q_HEAD and *Q_ENTRY
structures for list operations. This patch makes all list operations
in sys/kern use the queue(3) macros, rather than directly accessing the
*Q_{HEAD,ENTRY} structures.
This batch of changes compile to the same object files.
Reviewed by: phk
Submitted by: Jake Burkholder <jake@checker.org>
PR: 14914
Make a sonewconn3() which takes an extra argument (proc) so new sockets created
with sonewconn() from a user's system call get the correct credentials, not
just the parent's credentials.
This is the change to struct sockets that gets rid of so_uid and replaces
it with a much more useful struct pcred *so_cred. This is here to be able
to do socket-level credential checks (i.e. IPFW uid/gid support, to be added
to HEAD soon). Along with this comes an update to pidentd which greatly
simplifies the code necessary to get a uid from a socket. Soon to come:
a sysctl() interface to finding individual sockets' credentials.
to either enqueue or free their mbuf chains, but tcp_usr_send() was
dropping them on the floor if the tcpcb/inpcb has been torn down in the
middle of a send/write attempt. This has been responsible for a wide
variety of mbuf leak patterns, ranging from slow gradual leakage to rather
rapid exhaustion. This has been a problem since before 2.2 was branched
and appears to have been fixed in rev 1.16 and lost in 1.23/1.28.
Thanks to Jayanth Vijayaraghavan <jayanth@yahoo-inc.com> for checking
(extensively) into this on a live production 2.2.x system and that it
was the actual cause of the leak and looks like it fixes it. The machine
in question was loosing (from memory) about 150 mbufs per hour under
load and a change similar to this stopped it. (Don't blame Jayanth
for this patch though)
An alternative approach to this would be to recheck SS_CANTSENDMORE etc
inside the splnet() right before calling pru_send() after all the potential
sleeps, interrupts and delays have happened. However, this would mean
exposing knowledge of the tcp stack's reset handling and removal of the
pcb to the generic code. There are other things that call pru_send()
directly though.
Problem originally noted by: John Plevyak <jplevyak@inktomi.com>
This makes it possible to change the sysctl tree at runtime.
* Change KLD to find and register any sysctl nodes contained in the loaded
file and to unregister them when the file is unloaded.
Reviewed by: Archie Cobbs <archie@whistle.com>,
Peter Wemm <peter@netplex.com.au> (well they looked at it anyway)
code when examining their fix, which caused my code (in rev 1.52) to:
- panic("soaccept: !NOFDREF")
- fatal trap 12, with tracebacks going thru soclose and soaccept
where select(2) can return that a listening socket has a connected socket
queued, the connection is broken, and the user calls accept(2), which then
blocks because there are no connections queued.
Reviewed by: wollman
Obtained from: NetBSD
(ftp://ftp.NetBSD.ORG/pub/NetBSD/misc/security/patches/19990120-accept)
flag means that there is more data to be put into the socket buffer.
Use it in TCP to reduce the interaction between mbuf sizes and the
Nagle algorithm.
Based on: "Justin C. Walker" <justin@apple.com>'s description of Apple's
fix for this problem.
by bde, a few other tweaks to get the patch to apply cleanly again and
some improvements to the comments.
This change closes some fairly minor security holes associated with
F_SETOWN, fixes a few bugs, and removes some limitations that F_SETOWN
had on tty devices. For more details, see the description on the PR.
Because this patch increases the size of the proc and pgrp structures,
it is necessary to re-install the includes and recompile libkvm,
the vinum lkm, fstat, gcore, gdb, ipfilter, ps, top, and w.
PR: kern/7899
Reviewed by: bde, elvind
another specialized mbuf type in the process. Also clean up some
of the cruft surrounding IPFW, multicast routing, RSVP, and other
ill-explored corners.
writes of size (100,208]+N*MCLBYTES.
The bug:
sosend() hands each mbuf off to the protocol output routine as soon as it
has copied it, in the hopes of increasing parallelism (see
http://www.kohala.com/~rstevens/vanj.88jul20.txt ). This works well for
TCP as long as the first mbuf handed off is at least the MSS. However,
when doing small writes (between MHLEN and MINCLSIZE), the transaction is
split into 2 small MBUF's and each is individually handed off to TCP.
TCP assumes that the first small mbuf is the whole transaction, so sends
a small packet. When the second small mbuf arrives, Nagle prevents TCP
from sending it so it must wait for a (potentially delayed) ACK. This
sends throughput down the toilet.
The workaround:
Set the "atomic" flag when we're doing small writes. The "atomic" flag
has two meanings:
1. Copy all of the data into a chain of mbufs before handing off to the
protocol.
2. Leave room for a datagram header in said mbuf chain.
TCP wants the first but doesn't want the second. However, the second
simply results in some memory wastage (but is why the workaround is a
hack and not a fix).
The real fix:
The real fix for this problem is to introduce something like a "requested
transfer size" variable in the socket->protocol interface. sosend()
would then accumulate an mbuf chain until it exceeded the "requested
transfer size". TCP could set it to the TCP MSS (note that the
current interface causes strange TCP behaviors when the MSS > MCLBYTES;
nobody notices because MCLBYTES > ethernet's MTU).
Define a parameter which indicates the maximum number of sockets in a
system, and use this to size the zone allocators used for sockets and
for certain PCBs.
Convert PF_LOCAL PCB structures to be type-stable and add a version number.
Define an external format for infomation about socket structures and use
it in several places.
Define a mechanism to get all PF_LOCAL and PF_INET PCB lists through
sysctl(3) without blocking network interrupts for an unreasonable
length of time. This probably still has some bugs and/or race
conditions, but it seems to work well enough on my machines.
It is now possible for `netstat' to get almost all of its information
via the sysctl(3) interface rather than reading kmem (changes to follow).
so_error is set, clear it before returning it. The behavior
introduced in 4.3-Reno (to not clear so_error) causes potentially
transient errors (e.g. ECONNREFUSED if the other end hasn't opened
its socket yet) to be permanent on connected datagram sockets that
are only used for writing.
(soreceive() clears so_error before returning it, as does
getsockopt(...,SO_ERROR,...).)
Submitted by: Van Jacobson <van@ee.lbl.gov>, via a comment in the vat sources.
Distribute all but the most fundamental malloc types. This time I also
remembered the trick to making things static: Put "static" in front of
them.
A couple of finer points by: bde
detail is passed back and forwards). This mostly came from NetBSD, except
that our interfaces have changed a lot and this funciton is in a different
part of the kernel.
Obtained from: NetBSD
socket addresses in mbufs. (Socket buffers are the one exception.) A number
of kernel APIs needed to get fixed in order to make this happen. Also,
fix three protocol families which kept PCBs in mbufs to not malloc them
instead. Delete some old compatibility cruft while we're at it, and add
some new routines in the in_cksum family.
Specifically, don't allow a value < 1 for any of them (it doesn't make
sense), and don't let the low water mark be greater than the corresponding
high water mark.
Pre-Approved by: wollman
Obtained from: NetBSD
This commit includes the following changes:
1) Old-style (pr_usrreq()) protocols are no longer supported, the compatibility
glue for them is deleted, and the kernel will panic on boot if any are compiled
in.
2) Certain protocol entry points are modified to take a process structure,
so they they can easily tell whether or not it is possible to sleep, and
also to access credentials.
3) SS_PRIV is no more, and with it goes the SO_PRIVSTATE setsockopt()
call. Protocols should use the process pointer they are now passed.
4) The PF_LOCAL and PF_ROUTE families have been updated to use the new
style, as has the `raw' skeleton family.
5) PF_LOCAL sockets now obey the process's umask when creating a socket
in the filesystem.
As a result, LINT is now broken. I'm hoping that some enterprising hacker
with a bit more time will either make the broken bits work (should be
easy for netipx) or dike them out.
all of the configurables and instrumentation related to
inter-process communication mechanisms. Some variables,
like mbuf statistics, are instrumented here for the first
time.
For mbuf statistics: also keep track of m_copym() and
m_pullup() failures, and provide for the user's inspection
the compiled-in values of MSIZE, MHLEN, MCLBYTES, and MINCLSIZE.
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
pr_usrreq mechanism which was poorly designed and error-prone. This
commit renames pr_usrreq to pr_ousrreq so that old code which depended on it
would break in an obvious manner. This commit also implements the new
interface for TCP, although the old function is left as an example
(#ifdef'ed out). This commit ALSO fixes a longstanding bug in the
TCP timer processing (introduced by davidg on 1995/04/12) which caused
timer processing on a TCB to always stop after a single timer had
expired (because it misinterpreted the return value from tcp_usrreq()
to indicate that the TCB had been deleted). Finally, some code
related to polling has been deleted from if.c because it is not
relevant t -current and doesn't look at all like my current code.
(PR #1178).
Define a new SO_TIMESTAMP socket option for datagram sockets to return
packet-arrival timestamps as control information (PR #1179).
Submitted by: Louis Mamakos <loiue@TransSys.com>
the obsolete soqinsque and soqremque functions as well as collapsing
so_q0len and so_qlen into a single queue length of unaccepted connections.
Now the queue of unaccepted & complete connections is checked directly
for queued sockets. The new code should be functionally equivilent to
the old while being substantially faster - especially in cases where
large numbers of connections are often queued for accept (e.g. http).
(maximum size of a socket buffer) tunable.
Permit callers of listen(2) to specify a negative backlog, which
is translated into somaxconn. Previously, a negative backlog was
silently translated into 0.
argument is now more than just a single flag. (kern_malloc.c)
Used new M_KERNEL value for socket allocations that previous were
"M_NOWAIT". Note that this will change when we clean up the M_ namespace
mess.
Submitted by: John Dyson
